Related
i have the evo 3d and flashed some roms and alwats did back ups but tried the miui rom and now usb does not work at all...tried restoring or flashing other roms that were already on my usb cant do commands cuz usb doesnt work can someone please help
babybear293 said:
i have the evo 3d and flashed some roms and alwats did back ups but tried the miui rom and now usb does not work at all...tried restoring or flashing other roms that were already on my usb cant do commands cuz usb doesnt work can someone please help
Click to expand...
Click to collapse
can't do commands via usb, i'm reading this to mean, you don't have adb access.
after wiping the /data partition, where system settings are stored, including the toggle for adb access via, you will probably have to re-enable.
to enable adb access via usb on sense -> settings -> applications -> development -> usb debugging. this should be toggle on.
if that doesn't work, post back and we can start digging deeper but i'm hoping that'll resolve your isse!
I apologize in advance for being lengthy, but I want to be thorough to give you a good idea of what I did. Hopefully someone will point out what I did right or wrong.
I had this same exact problem with MIUI the other day. I am not an expert on rooting/flashing, but I was able to resolve the issue with a little trial and error.
I flashed MIUI on my 3d. I wasnt too impressed with it really and flashed back to Eternity. A few days passed and I decided to give MIUI another shot and flashed back a second time. Mind you, I always do a factory reset twice, wipe cache twice, and wipe dalvik cache twice before any flash (even if it is an updated version of the ROM I am using), so I made sure to wipe everything before flashing. When I flashed I noticed the little bug on the notification bar area of MIUI and thought it was a clever way of showing debug mode was on.
After messing with it some more I realized that I just plain didnt like it and giving it any more time was not neccessary. I decided to flash back to Eternity. I booted up my phone into bootloader and tried to get into fastboot USB, but it wouldnt activate when I put my USB in. I rebooted into MIUI to make sure I didn't mistakenly turn debugging off. It was still on. I tried to get into fastboot USB a second time. Still an error. I searched XDA came across this thread. Noted that USB debug was on. Followed steps, no progress.
At this point I figured I would just try to flash eternity to see what happened without using fastboot. Froze on bootup. So I flashed MIUI back on. I then remembered hearing about Flash Image GUI on market (made by JoeyKrim who posted above me in this thread). I figured I would give it a shot.
Failed. I had Ziggy kernel from Eternity already on my SD, so I flashed that. It said it was successful. So I powered down. Then I booted into bootloader and went into recovery. I tried to flash Eternity and it froze during boot. I tried to boot up several times and always froze. I went back to MIUI figuring that perhaps the kernel really didnt flash. MIUI made it past boot, to the lockscreen, but I couldnt unlock it. Bascially I was stuck. None of the buttons worked except for power. I tried again to reboot MIUI again. Same problem.
Starting to get a bit desperate, and not being able to get into fastboot USB at all, I figured I could try to nand restore to stock rooted. Of course...still wont work since I couldnt access fastboot USB. My screen froze during boot on this as well.
So here I am stuck with no fastboot USB, a restore that wont flash, Eternity wont flash, and MIUI isnt responding. Honestly I was getting upset and had half a mind to hit the phone with a stun gun and take it to Sprint. (not my idea, but a Sprint person told me once to fry it and take it in and they would say it was a battery short which fried it). Anyhow. I then figured I would try RUU. Problem was that I heard RUU wont work unless you are locked. So I tried to re-lock, and of course couldnt do it since fastboto USB wont work.
I decided to hit the RUU anyhow and it failed saying it was Security fail. I wazs thinking of options, hit it with stun gun hopefully sprint replaced, sink it and insurance replace it, or just head to sprint to see if they could help. But much to my surprise, I tried to boot into bootloader one more time and sure enough fastboot USB was back. My recovery was gone, so I flashed CWM again and was able to put eternity back on. The only problem is that my CWM was deleted and I lost my Nand. Not too big a deal as I can always put a stock rooted rom on and use that as my Nand. Or I can always just RUU to stock, then re-root just to be certain I have a clean nand.
Alright guys. Anyone care to comment on what could have been done differently?
thos25 said:
I apologize in advance for being lengthy, but I want to be thorough to give you a good idea of what I did. Hopefully someone will point out what I did right or wrong.
I had this same exact problem with MIUI the other day. I am not an expert on rooting/flashing, but I was able to resolve the issue with a little trial and error.
I flashed MIUI on my 3d. I wasnt too impressed with it really and flashed back to Eternity. A few days passed and I decided to give MIUI another shot and flashed back a second time. Mind you, I always do a factory reset twice, wipe cache twice, and wipe dalvik cache twice before any flash (even if it is an updated version of the ROM I am using), so I made sure to wipe everything before flashing. When I flashed I noticed the little bug on the notification bar area of MIUI and thought it was a clever way of showing debug mode was on.
After messing with it some more I realized that I just plain didnt like it and giving it any more time was not neccessary. I decided to flash back to Eternity. I booted up my phone into bootloader and tried to get into fastboot USB, but it wouldnt activate when I put my USB in. I rebooted into MIUI to make sure I didn't mistakenly turn debugging off. It was still on. I tried to get into fastboot USB a second time. Still an error. I searched XDA came across this thread. Noted that USB debug was on. Followed steps, no progress.
At this point I figured I would just try to flash eternity to see what happened without using fastboot. Froze on bootup. So I flashed MIUI back on. I then remembered hearing about Flash Image GUI on market (made by JoeyKrim who posted above me in this thread). I figured I would give it a shot.
Failed. I had Ziggy kernel from Eternity already on my SD, so I flashed that. It said it was successful. So I powered down. Then I booted into bootloader and went into recovery. I tried to flash Eternity and it froze during boot. I tried to boot up several times and always froze. I went back to MIUI figuring that perhaps the kernel really didnt flash. MIUI made it past boot, to the lockscreen, but I couldnt unlock it. Bascially I was stuck. None of the buttons worked except for power. I tried again to reboot MIUI again. Same problem.
Starting to get a bit desperate, and not being able to get into fastboot USB at all, I figured I could try to nand restore to stock rooted. Of course...still wont work since I couldnt access fastboot USB. My screen froze during boot on this as well.
So here I am stuck with no fastboot USB, a restore that wont flash, Eternity wont flash, and MIUI isnt responding. Honestly I was getting upset and had half a mind to hit the phone with a stun gun and take it to Sprint. (not my idea, but a Sprint person told me once to fry it and take it in and they would say it was a battery short which fried it). Anyhow. I then figured I would try RUU. Problem was that I heard RUU wont work unless you are locked. So I tried to re-lock, and of course couldnt do it since fastboto USB wont work.
I decided to hit the RUU anyhow and it failed saying it was Security fail. I wazs thinking of options, hit it with stun gun hopefully sprint replaced, sink it and insurance replace it, or just head to sprint to see if they could help. But much to my surprise, I tried to boot into bootloader one more time and sure enough fastboot USB was back. My recovery was gone, so I flashed CWM again and was able to put eternity back on. The only problem is that my CWM was deleted and I lost my Nand. Not too big a deal as I can always put a stock rooted rom on and use that as my Nand. Or I can always just RUU to stock, then re-root just to be certain I have a clean nand.
Alright guys. Anyone care to comment on what could have been done differently?
Click to expand...
Click to collapse
Well there is a lot going on in that post ... Not sure how my application Flash Image GUI failed. I would be more than happy to fix/resolve any bug or issue you've encountered!
Fastboot usb mode should always work. There is no setting in Android which will have any impact on fastboot usb mode (other than not allowing the device to boot into the bootloader). I generally find the best process to be, boot the device into the bootloader, plug in usb and then select fastboot.
Perhaps, once you're in the bootloader, you can also select fastboot and then plug in USB (this works best on my NS4G).
Either way, fastboot usb should always work. If you're using Windows, there could definitely be a drivers issue or Windows being finicky with the drivers and that might result in fastboot USB not working. A simple reboot of the Windows machine should clear any fastboot driver issues.
The best working method to correctly load a ROM is by properly loading the recovery to work with the HTC unlock method. HTC unlock method will only grant the recovery write access to the boot partition when the recovery image is temporarily fastboot boot'd. The command is: fastboot boot c:\android\cwm-recovery.img.
If you boot into the bootloader and select recovery from the menu, it will boot into the recovery, but the HTC unlock method will not grant the recovery write access to the boot partition. You can flash a ROM from here and restore a nand. Both will completely successfully and claim they flashed the kernel w/o any issues but the memory write lock will have prevented the kernel writes from being retained.
Also, regarding my application, Flash Image GUI, it should properly flash any EVO 3D kernel .zip file from normal Android mode as the HTC unlock method allows kernel write access while in normal Android mode.
Why did HTC block kernel write access from recovery mode? They haven't provided an answer .. we can only speculate ...
Hope that helps explain a few more steps to the process and provide greater clarity!
thanks Joey.
Who knows. I have no idea why your app didnt work. I would also like to point out that I am not blaming your app at all. I may have simply done it incorrectly. To be honest by the time I even used your app I was pretty frazzled, so I may have done an error.
Ok. So, yes. Everytime I flash I always use fastboot USB. The command you use is different from mine though. My command is courtesy of Zedomax (HTC Evo Hacks method). CD desktop \rootevo3dnew
fastboot boot cwm-4.0.1.4-shooter.img
So, I always use that when I flash.
I have no idea why fastboot USB dissapeared. At first I figured it was a USB port error. I have heard that many people with OG Evo and 3vo's have USB port issues. So, like a good troubleshooter, I went for the obvious and switched my USB cord. No luck. Then I figured I would plug it into the wall to charge to see if it charged. It did. So I knew it wasnt the cord and it wasnt the port.
Perhaps like you said, the driver was just wonky. I ran a check and it said driver was up to date, so I doubt it.
In the end plugging it into HTC Sync to run an RUU fixed the problem. Even though the RUU didnt go through because I was HTC unlocked, it did fix the USB error and I had USB access again. From there I was able to flash back into recovery and flash back to Eternity.
And on a side note, I also learned the importance of copying my ClockworkMod file off of my SD card and onto my desktop. Since I lost the recovery I no longer had CWM on my SD card and my nand backup was gone. So now I will always keep a copy of the folder on my desktop so that I make sure to have a working NAND.
And to be thorough I decided to re-lock, then re-unlock, re-root today as well. I figured this way I would be working with a 100% clean working ROM again to have a good NAND as a basis as opposed to downloading a stock rooted ROM. Im sure it is probably basically the same thing, but I wanted to do it this way to be sure.
thanks again. Ill let you know if I have any additional issues with your app.
thos25 said:
thanks Joey.
Who knows. I have no idea why your app didnt work. I would also like to point out that I am not blaming your app at all. I may have simply done it incorrectly. To be honest by the time I even used your app I was pretty frazzled, so I may have done an error.
Ok. So, yes. Everytime I flash I always use fastboot USB. The command you use is different from mine though. My command is courtesy of Zedomax (HTC Evo Hacks method). CD desktop \rootevo3dnew
fastboot boot cwm-4.0.1.4-shooter.img
So, I always use that when I flash.
I have no idea why fastboot USB dissapeared. At first I figured it was a USB port error. I have heard that many people with OG Evo and 3vo's have USB port issues. So, like a good troubleshooter, I went for the obvious and switched my USB cord. No luck. Then I figured I would plug it into the wall to charge to see if it charged. It did. So I knew it wasnt the cord and it wasnt the port.
Perhaps like you said, the driver was just wonky. I ran a check and it said driver was up to date, so I doubt it.
In the end plugging it into HTC Sync to run an RUU fixed the problem. Even though the RUU didnt go through because I was HTC unlocked, it did fix the USB error and I had USB access again. From there I was able to flash back into recovery and flash back to Eternity.
And on a side note, I also learned the importance of copying my ClockworkMod file off of my SD card and onto my desktop. Since I lost the recovery I no longer had CWM on my SD card and my nand backup was gone. So now I will always keep a copy of the folder on my desktop so that I make sure to have a working NAND.
And to be thorough I decided to re-lock, then re-unlock, re-root today as well. I figured this way I would be working with a 100% clean working ROM again to have a good NAND as a basis as opposed to downloading a stock rooted ROM. Im sure it is probably basically the same thing, but I wanted to do it this way to be sure.
thanks again. Ill let you know if I have any additional issues with your app.
Click to expand...
Click to collapse
I'll give you a little feedback on the process to sum up your knowledge around the edges. Everything seems correct, there are a few points.
1) CD desktop \rootevo3dnew and fastboot boot cwm-4.0.1.4-shooter.img is the same as fastboot boot desktop\cwm-4.0.1.4-shooter.img . The only difference here is where the recovery image is stored. The key part is being able to supply the fastboot binary with the correct command being "boot" instead of "flash recovery".
2)If you lose your CWM recovery, it does not always mean you have lost your nandroid images. They are stored on the sdcard card under clockworkmod directory, /sdcard/clockworkmod . Even if you switch recoveries, these files will still remain. They should never be erased unless you intentionally erase them.
3) If you really want to start with 100% clean stock ROM, running an RUU is the best way. re-lock and un-lock, all it does is toggle a setting in the bootloader and wipe your /data directory. it won't make any changes to radio, system partition, etc. an RUU will copy over most of all the partitions with stock files, completely resetting the device.
appreciate your support with my app and hope the extra details help round out the edges! good luck!
I had a similar issue when i was switching to AOSP kernels/roms. I rebooted my phones once or twice and it connected fine. Maybe it have something to do with AOSP since MIUI is aosp also.
joeykrim said:
I'll give you a little feedback on the process to sum up your knowledge around the edges. Everything seems correct, there are a few points.
1) CD desktop \rootevo3dnew and fastboot boot cwm-4.0.1.4-shooter.img is the same as fastboot boot desktop\cwm-4.0.1.4-shooter.img . The only difference here is where the recovery image is stored. The key part is being able to supply the fastboot binary with the correct command being "boot" instead of "flash recovery".
2)If you lose your CWM recovery, it does not always mean you have lost your nandroid images. They are stored on the sdcard card under clockworkmod directory, /sdcard/clockworkmod . Even if you switch recoveries, these files will still remain. They should never be erased unless you intentionally erase them.
3) If you really want to start with 100% clean stock ROM, running an RUU is the best way. re-lock and un-lock, all it does is toggle a setting in the bootloader and wipe your /data directory. it won't make any changes to radio, system partition, etc. an RUU will copy over most of all the partitions with stock files, completely resetting the device.
appreciate your support with my app and hope the extra details help round out the edges! good luck!
Click to expand...
Click to collapse
Thanks for the comments and lesson. I apologize for not responding sooner, but a recent death in family prevented me from really being on here too much lately.
1) I pretty much figured that. Yeah. I only try to flash using this method, that is why when my fastboot USB disapeared I thought I was really in a bad spot. Luckily I got it working again, so all was not lost.
2). Yes. I know it should remain on SD card, which was strange why I couldn't find it. However, thinking back on it, I do remember deleting some files off of my SD card on the same night. I probably just mistakenly deleted my CWM Recovery with my NAND backups. Sometimes when I double click a file to look at it, when I leave the file I see that there is a checkmark on that file. I may have just not noticed the checkmark on the CWM, went to delete another file, and mistakenly deleted CWM with it.
3) An RUU will not change a RADIO? I was under the impression that they did. Sort of like applying an OTA, but manually doing it through SYNC.
well, thanks again though. I learned some new things and appreciate it.
Flash image GUI works like a charm
Sent from my PG86100 using XDA App
i m a newbie
plz tell me how to get out of the fastboot usb mode. i m stuck with the G1 screen having fastboot usb title on the top.
PLZ HELP!!!
Ok so here's the deal...
I was running ViperRez ROM and decided it was time for a change and found a few ROMs I wanted to check out. Tried EclipticRez, kept force closing and rebooting before or just after I could finish the phone set up. Tried Nils Business, no luck. So finally tried to load MIUI for ICS and ran into trouble.
Each time before loading these ROMs I used Clean Wipe to wipe before loading the ROM. I am S-on. Unlocked. HBOOT- 2.11
So here's where my trouble is... Normally when a ROM fails to work, I'd simply reboot into recovery, wipe, and load a different rom via zip from SD card. The problem I'm having, besides the ROM not loading and getting stuck on the HTC flash screen is, I cant get into recovery. I can reboot into the bootloader screen, get to fastboot. When I try to select recovery the phone goes black, flashes something quickly on the lower part of the screen with CWM recovery looking logo, then reboots and sticks on the HTC white screen. Another issue, my battery will no longer charge via phone charger, so I had to go out and buy a battery charger today to even get my phone running again since all this drained the battery.
I've flashed the PH98IMG, removed it since it was causing me to constantly reflash it and reboot. Removed the boot img from the MIUI ROM and placed it in the root of my SD card, seemed to do nothing. I've also tried to use abd, although I'm not really sure how to use it, basically tried to follow a few different threads, but when I typed adb devices, the list was always blank.
Can anyone help me to either get this MIUI ROM working or at least get me back into recovery so I can re-load ViperRez that I know was working? I am no expert, so please give detailed instructions if you can. Thanks in advance.
ronin_rone said:
Ok so here's the deal...
I was running ViperRez ROM and decided it was time for a change and found a few ROMs I wanted to check out. Tried EclipticRez, kept force closing and rebooting before or just after I could finish the phone set up. Tried Nils Business, no luck. So finally tried to load MIUI for ICS and ran into trouble.
Each time before loading these ROMs I used Clean Wipe to wipe before loading the ROM. I am S-on. Unlocked. HBOOT- 2.11
So here's where my trouble is... Normally when a ROM fails to work, I'd simply reboot into recovery, wipe, and load a different rom via zip from SD card. The problem I'm having, besides the ROM not loading and getting stuck on the HTC flash screen is, I cant get into recovery. I can reboot into the bootloader screen, get to fastboot. When I try to select recovery the phone goes black, flashes something quickly on the lower part of the screen with CWM recovery looking logo, then reboots and sticks on the HTC white screen. Another issue, my battery will no longer charge via phone charger, so I had to go out and buy a battery charger today to even get my phone running again since all this drained the battery.
I've flashed the PH98IMG, removed it since it was causing me to constantly reflash it and reboot. Removed the boot img from the MIUI ROM and placed it in the root of my SD card, seemed to do nothing. I've also tried to use abd, although I'm not really sure how to use it, basically tried to follow a few different threads, but when I typed adb devices, the list was always blank.
Can anyone help me to either get this MIUI ROM working or at least get me back into recovery so I can re-load ViperRez that I know was working? I am no expert, so please give detailed instructions if you can. Thanks in advance.
Click to expand...
Click to collapse
Have you tried fastboot flashing the boot.img?
gleggie said:
Have you tried fastboot flashing the boot.img?
Click to expand...
Click to collapse
I have tried. Although Im not sure it worked right, or if I even did it right. Just an update. I tried flashing another PH98IMG and it said it was older. Still stuck
ronin_rone said:
I have tried. Although Im not sure it worked right, or if I even did it right. Just an update. I tried flashing another PH98IMG and it said it was older. Still stuck
Click to expand...
Click to collapse
your are s-on you need to extract the boot.img from the zip. go to fastboot and make sure it says fastboot usb
fastboot flash boot boot.img
that will flash the kernel that you need. the ph98img you only need if you are trying to make firmware changes. everything else can be run from the computer.
Also, make sure you are flashing 3.04 roms. Viperrez i think never updated to the global . If you are flashing global roms, you HAVE to do the firmware update.
dragonstalker said:
your are s-on you need to extract the boot.img from the zip. go to fastboot and make sure it says fastboot usb
fastboot flash boot boot.img
that will flash the kernel that you need. the ph98img you only need if you are trying to make firmware changes. everything else can be run from the computer.
Also, make sure you are flashing 3.04 roms. Viperrez i think never updated to the global . If you are flashing global roms, you HAVE to do the firmware update.
Click to expand...
Click to collapse
I kinda understand what you are saying, but the other problem I have is.... When running adb my phone is not listed in the adb devices, although it is listed in the usb devices. Not sure what to do about that.
Are you in charge only mode on the phone?
Is usb debugging enabled?
USB debugging was selected prior to this incident and it was on charge only as well. It was not connected as a usb drive. I cannot get into the settings of the phone to find out what it is now or if its changed.
I would suggest going S-Off, it will make flashing a whole lot easier. As for getting back to a usable state, you should be able to flash a PH98IMG in bootloader. If anything, flash an RUU and go from there.
Hi all. I just got my factory warranty back and I attempted to root it. Everything went as it should, until just after the install finished. Instead of rebooting normally, it now will only reboot into TWRP. Once there, when I try to flash a custom ROM (in this case, Bliss, but I don't think it matters, I get an error message that says the zip file is corrupt. Then, while still in recovery, when I tried to wipe everything except the sd card, it says mkfs.fat process ended with error. I then powered down and attempted the factory reset. I scrolled down on both screens and it did not say anything about any errors, so I assumed it took. However, it reboots right back into TWRP recovery. It also boots right to TWRP recovery when I try to boot normally. Of course, adb does not recognize the phone in any mode that I can get into (fastboot/recovery/download), so, I can't use LG Bridge to reflash the original firmware. Does anybody have any ideas for a fix? I know that this replacement phone had 6.0 on it. I thought I did everything to a t? TIA...
OK, not sure how I got there, but when I attempt to reboot from TWRP it says No OS Installed! Are you sure you want to reboot? That at least says what the problem is. Does anybody know how to fix this?
you have the latest twrp recovery? Just make sure you have 3.0 or higher and then try flashing again. And IMO the blissrom isnt worth using unless you dont mind smaller screen, no second screen, wonky Bluetooth and no camera.
AwesomeFabe said:
you have the latest twrp recovery? Just make sure you have 3.0 or higher and then try flashing again. And IMO the blissrom isnt worth using unless you dont mind smaller screen, no second screen, wonky Bluetooth and no camera.
Click to expand...
Click to collapse
Hey, I actually just fixed it. I finally was able to get back into download mode and I then used LG Bridge. Restoring now. Yeah, I actually picked it for some reason I cannot remember when I was faced with having to put in a custom rom as my option. I agree. When I had 5.1.1 everything worked after I got the bloatware out. Not going to get too fancy, I had a bit of a scare.
tl;dr - Can't seem to find my way out of a software brick. Have sideloaded the stock OS from 1+ but still forever getting the spinning dots or fastboot screen, depending on which mode i boot into.
Hi all. Signed up to make this thread, but i've been lurking for years.
I have a OnePlus X that is about the least modded smartphone i've ever owned. I've never been pleased enough with a retail product that i didn't feel compelled to strip out the bloat and start over, until this phone. Other than stock, i've just got a gallery app, some apps for manipulating text files or compiling code, couple games, and social media apps.
Anyway, a few days ago i got a notification about a software update. Downloaded. Installed. Updated. No problem.
Maybe yesterday or the day before, it showed up again. This morning i downloaded, installed, and suddenly i have apps closing. It's been over 12 hours so i'm hazy on how it all started, but i was getting something like "package installer" errors when attempting to open some apps. Same deal when i went to adjust permissions of those affected apps. Every time i unfocused a box that had pulled up swype, i would get an error message saying swype crashed or closed or something.
So i started uninstalling third party apps (i don't keep many, and most i've had for years so i think they're probably trustworthy). Same deal. Started uninstalling updates to google apps. Same deal. Went to uninstall and reinstall some non stock apps that i'd kept previously. Nothing.
I went to cook breakfast while an app was reinstalling, and i came back to a red dot on my screen with two white dots chasing each other around it. From what i'm reading that's a sign of a bootloop or software brick. I've taken all steps i could find, including wiping cache and sideloading a fresh stock OS, but to no avail.
Is it that i've ruined my google apps somehow and need to restore them? How would i even go about figuring out what the problem is? Any advice or guidance is appreciated
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
"A09" said:
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
Click to expand...
Click to collapse
I have wiped cache, deleted data, tried a factory reset in the stock bootloader, and i have used ADB to sideload a full stock rom (not upgrade package) that i downloaded from OnePlus.
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Exodusche said:
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Click to expand...
Click to collapse
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
jtg1984 said:
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
Click to expand...
Click to collapse
Fastboot flash easiest way. Make sure it's the old recovery from 2.2.2. Not the new mm stock recovery.
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
I m not a dev, i m a newbie like you. i hv done a lot of experiments with my oneplus-x, as for u the first update u got few days back should be oos 3.1.2 and the one u got 2 days before should be 3.1.3. When u upgrade from lollipop to marshmellow, even your stock recovery got upgraded to latest version, which is something different from old lollipop recovery.
You said you have access to recovery mode. thts pretty much gud, what u can do is that wipe data and cache through stock recovery and do a clean install of oos 3.1.3. I ll be providing all the necessary links down below. If you need assistance with fastboot cmds and anything feel free to ask.
Thanks to original link provider @Sachin7843
Useful Links: -
1. Stock Lollipop Recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
2. Official TWRP Recovery - https://dl.twrp.me/onyx/
3. Blu Spark Recovery - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4. SuperSU for OOS 3.x.x - https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view
5. Unbrick Guide - http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
6. Official Oxygen OS 3.1.3 link - https://s3.amazonaws.com/oxygenos.o...OTA_018_all_201609291837_741146bcf28e4587.zip
7. SD Card Writable fix in MM - http://forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266
8. For Stock MM Recovery - http://forum.xda-developers.com/oneplus-x/general/oxygenos-3-1-0-marshmallow-community-t3445043
Sorry for my bad english
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
Don't sideload it, use fastboot to flash it. "Fastboot flash recovery name.img" - without he quotes and the image name.
Sorry for vanishing. Had a busy week.
Not sure what happened the first time i tried to put the 2.2.3 image on the SD card, because the file didn't show up in my recovery, but i tried again later (after giving up on flashing the old recovery, since i couldn't figure out how to do that in recovery) and managed to do a clean install of the older OOS version.
That did the trick, and after booting up, my phone proceeded to update again - this time without any crashes or errors with my apps afterward. The phone still does the red dot with the white dots chasing around it when it boots up, which must be the new boot screen. It also seems to stay on that screen for much longer than it stayed on the old morphing shape boot screen, but it still boots up reliably now after 30-60 seconds rather than freezing in boot forever.
I've since enabled dev mode on my phone. Is that going to be enough to enable ADB commands from recovery? I kind of like that i've kept my phone stock, so i'll leave it that way if i can, but it would have been much easier to fix this problem if i'd had access to most of my debug commands. As it was, without dev mode and in the standard recovery, it seemed that sideload was the only command i was able to use, and only when the phone was requesting a sideload over usb
I thought you guys might find this amusing, and hopefully it will help some people that get into a similar situation as myself. First, a little background - I rooted and installed Alliance Rom years ago back before the bootloader was unlocked. This worked amazing for me for a long time but I've recently had some weird issues with my phone so I decided to do a factory reset.
I went into settings, clicked factory reset, and then my phone got into a boot loop on recovery. I remember from before I had to do a regular boot then click recovery at the prompt instead of doing the factory recovery so I did that.
Instead of doing a normal wipe, I wanted to wipe everything on my phone and start from scratch so I did the full wipe (in what I think was TWRP or safestrap or whatever). When I went to reboot my phone it had a message like "are you sure? there's no OS installed" and I clicked ok. Well now I couldn't get the phone to boot into anything except download mode so at least I can use Odin.
I'm frantically searching google to try and find ways to install some sort of recovery so I could load AllianceRom again since I still had the zip file for it. Eureka, I found TWRP for my phone! I tried to flash TWRP through Odin but that doesn't work because my bootloader wasn't unlocked.... I remember this from last time ... all of the places I found online to install any sort of recovery required the phone to be booted into android.
So I'm clicking around and someone has a recovery randomly posted in a thread so I install it thinking, what the hell, what's the worst that could go wrong. So I install it through Odin and boot into normal recovery and I get this message saying my phone has been tampered with and to go to a verizon store immediately! Oops... upon further investigation (looking at the download screen), I tripped the knox flag... oh well, it's not like my phone is in warranty anymore (I got it on release day).
I search around looking for what I should do next and I found a thread that talked about being on complete stock, rooting, then unlocking the bootloader. I download all the files I need (newest firmware here - https://www.sammobile.com/firmwares/galaxy-note3/SM-N900V/ and thread here - https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010) to go back to stock and flash in Odin. Actually I didn't download from sammobile.com because it was downloading too slow so I just googled the file name and found it somewhere else faster, go figure.
Everything seems to be going ok then all of a sudden FAIL in Odin... Ahhh what the heck do I do now? Try again obviously! Second try works woo hoo! Phone start booting up, things are looking good!!! hooray!! But wait... it's taking forever to start and it's stuck on the Verizon logo... uh oh... taking way too long to boot up so I pull the battery and try again. Boots right in saying that android is upgrading so I think I'm finally in the home stretch here.
I try to run the ArabicToolApp for Root but I installed the latest firmware which isn't supported DAMN IT! Downloaded the correct firmware (OB6!), flashed in Odin, same problem before where it was stuck on the red verizon screen, pulled battery, rebooted, finally time to get root!
Phone finally boots into OS and I get a popup "unfortunatley com.google.process.gapps has stopped" great... and it keeps coming up over and over again after I hit ok... just my luck! Reboot again to see if that fixes the issue. Seems weird that I didn't have to go through all the initial setup stuff I did on the other version I installed... hmm... or maybe it was because I pulled the battery on the red verizon screen? Whatever. I somehow manage to get to options to do a factory reset and I let the verizon screen stay on a while this time. I'll go take my contacts out and give my wife some love while I wait
Come back and the phone is at the setup wizard, this is good news. Enabled USB debugging, installed root, done! Thank god!
Next I want to unlock the bootloader. I follow the steps here which aren't very clear (I'm guessing on purpose for novice computer users) - https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
1. I installed eMMC from the play store to make sure my CID started with a 15, it does so I know I'm good to use the hack.
2. I installed both files in the unlock kit (adb and driver setup)
3. Fired up adb, navigated to where I had unlock_n3, and ran through the first part of the code once, reboot my phone, checked that the CID was the developer CID, and then ran the second part of the code three times before it worked
I verified the bootloader was installed correctly by trying to install TWRP through Odin, which worked!
I'm going to try out Jasmine Rom since it's a popular one that is on 5.0. My SD card only showed 30 megs free or something like that, so I formatted it from within android and copied the zip file over and installed the Rom through TWRP. Rom installed just fine, so I did one last factory reset which worked great and I think I'm finally good to go!
If you have any questions or run into any issues feel free to reply here and I'll try to help as much as I can.
Glad it worked out for you in the end.
From making a few mistakes I know that sinking feeling "oh no, what have I done?"
FWIW, the bootloader unlock method (in principle) works from nearly ANY ROM which is rooted - so, you would have saved yourself a bunch of time if you had started with that before you wiped the Alliance ROM. So long as you have root and a CID value that starts with 0x15, you just need root privileges - no need to return to stock and re-root.
(The "in principle" part is that there were several bugs in the "safety checks" portion of the unlocker binary that were sensitive to the OS revision, so you might have to search through the unlock thread to find a version of the unlock binary that is compatible with whatever rooted ROM is on the phone when the unlocking is attempted.)
good luck
PS The AryaMod ROM (w/ phantomOne kernel) is pretty solid - Marshmallow w/ S-Pen apps, too! As with any other dev ROM, there are a few sharp edges, but mostly everything works (except NFC).
.