I have a previously 'security error' P765 phone. Recently,there seem to be easy ways to get rid of that. So,I tried.
I tried this:
[GUIDE] [UNBRICK][ROOT] FLASH Any LG L9 Factory ROM (kdz) WITH OFFLINE FIX
(http://forum.xda-developers.com/showthread.php?t=2085344)
When the phone is flashed and rebooted, I find that the animation was loading too long, so I rebooted the Phone.
I think here is my fault,as I later researching in the forum said I should wait at least 30 min.
I tried the above method again.
It can't detect my phone, isConnectedPhone is 0
So I tried other flashing method,like
P765 Unbrick Using LG Flash Tool 2014(http://forum.xda-developers.com/optimus-l9/general/p765-unbrick-using-lg-flash-tool-2014-t2950433)
It stuck at 50 %
Am I out of luck? Or is fastboot my last method?
Thanks in advance.
metroroland said:
I have a previously 'security error' P765 phone. Recently,there seem to be easy ways to get rid of that. So,I tried.
I tried this:
[GUIDE] [UNBRICK][ROOT] FLASH Any LG L9 Factory ROM (kdz) WITH OFFLINE FIX
(http://forum.xda-developers.com/showthread.php?t=2085344)
When the phone is flashed and rebooted, I find that the animation was loading too long, so I rebooted the Phone.
I think here is my fault,as I later researching in the forum said I should wait at least 30 min.
I tried the above method again.
It can't detect my phone, isConnectedPhone is 0
So I tried other flashing method,like
P765 Unbrick Using LG Flash Tool 2014(http://forum.xda-developers.com/optimus-l9/general/p765-unbrick-using-lg-flash-tool-2014-t2950433)
It stuck at 50 %
Am I out of luck? Or is fastboot my last method?
Thanks in advance.
Click to expand...
Click to collapse
try this
1) change usb port
2) change cable
3) Use another pc to flash ( Win7 OS preferred)
puntoazul said:
try this
1) change usb port
2) change cable
3) Use another pc to flash ( Win7 OS preferred)
Click to expand...
Click to collapse
I tried with LG Flash Tool 2014
with changing USB port/cable/pc(win 7)
but it become worse, it said error at stage 3, 7%
Hi, everybody.
Do you think it makes sense to flash some recovery (Eg. cwm) by some means(fastboot?) so that I can flash some rom to my P765?
Unfortunately my boot locker is still locked.
Thanks.
Related
I recently rooted & flashed custom rom (CM 9) on my Optimus L3.Then i wanted to flash it back to stock after i got bored of the ICS rom, and followed a KDZ Updater guide, and now my device is bricked. If i try to turn it on, it will boot loop forever.The KDZ proccess was perfect, i had no errors (atleast i think i dont).I really need help to save my phone.
Used Windows7, had LG PC Suite IV Installed, i disabled LG Modem, I was in Emergency mode, .kdz used *V10H_00*.
no1thedark said:
I recently rooted & flashed custom rom (CM 9) on my Optimus L3.Then i wanted to flash it back to stock after i got bored of the ICS rom, and followed a KDZ Updater guide, and now my device is bricked. If i try to turn it on, it will boot loop forever.The KDZ proccess was perfect, i had no errors (atleast i think i dont).I really need help to save my phone.
Used Windows7, had LG PC Suite IV Installed, i disabled LG Modem, I was in Emergency mode, .kdz used *V10H_00*.
Click to expand...
Click to collapse
I also tried LGMDP, but it doesn't recognize my phone, since i somehow can't manage to install the drivers correctly since it can't boot..
I have a Lg Optimus l9 p769 and It got Brick a couple of days ago although I did not flash anything onto it or had any backups. I rooted it however through a .apk file and the phone work for a while(almost 2 months) and then I nest with the files trying to move apps to sd and it got bricked.In the phone however I did not have USB debugging on or anything. In order to Unbrick it I tried flashing a .kdz file on the phone following the steps of this forum -> http://forum.xda-developers.com/showthread.php?t=2085344 . I followed every step until like the 11th step perfectly but at 15% of downloading(or flashing) it stop and told me that my it could connect to my phone. I tried everything even changing the USB cable and install all types of lg USB drivers. Is this it for the phone? Can I do anything else? It does show that it's connected to the PC but when I plug it in it installs stuff? I don't know what to do now help? It's soft bricked and stuck on lg logo screen.:crying::crying:
Jay Grant said:
I have a Lg Optimus l9 p769 and It got Brick a couple of days ago although I did not flash anything onto it or had any backups. I rooted it however through a .apk file and the phone work for a while(almost 2 months) and then I nest with the files trying to move apps to sd and it got bricked.In the phone however I did not have USB debugging on or anything. In order to Unbrick it I tried flashing a .kdz file on the phone following the steps of this forum -> http://forum.xda-developers.com/showthread.php?t=2085344 . I followed every step until like the 11th step perfectly but at 15% of downloading(or flashing) it stop and told me that my it could connect to my phone. I tried everything even changing the USB cable and install all types of lg USB drivers. Is this it for the phone? Can I do anything else? It does show that it's connected to the PC but when I plug it in it installs stuff? I don't know what to do now help? It's soft bricked and stuck on lg logo screen.:crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=46181080
Sent from my LGMS769 using XDA Premium 4 mobile app
Hello,
I've got a LG L5 II that is stuck at LG screen. This happen because maybe I've deleted the update of google apps in order to have disk space left.
I've done a lot of research before posting a new thread but now, I ask for your help.
Useful Information :
LG L5 II E460, firmware stock, not rooted, firmware V10F
Try on USB 3.0 and USB 2 with cable microUSB -> USB because computer is an ASUS Transformer
Connection information in device manager :
Normal boot : MT65xx Android Phone
Download mode : LG AndroidNet Phone
Recovery mode : Android laying on the floor with red exclamation mark but nothing happen.
Guide used and results :
Official LG method :
Power on : when connected, still waiting for connection in the LG Update window
Download mode : Connection OK but when trying to upgrade from recovery, failed @ 4 or 5 %, phone disconnected
LG Flashtool 2014 :
Download mode : failed @ 4 or 5 %, phone disconnected
TOT Method: Unable to find TOT file but trying with bin and dll from kdz firmware
Download mode : Error at step flashing SCI.
If possible, I'd like to do a normal flash without losing data on the internal. I know I can do it but I need your help, please
If more information wanted, do not hesitate to ask, I'm trying to be the more accurate possible. Sorry for my English, it''s not my native language.
Thanks
I'm trying to get the tot file from my firmware KDZ.
Extracting KDZ give me DLL and bin file.
I don't know what to do with this bin file. Is it possible to convert it in tot file ?
Thanks
Midask said:
I'm trying to get the tot file from my firmware KDZ.
Extracting KDZ give me DLL and bin file.
I don't know what to do with this bin file. Is it possible to convert it in tot file ?
Thanks
Click to expand...
Click to collapse
any luck on recovering, im suffering the same. but i formated my system and now when i flash kdz the phone boots but goes to an android guy with a red triangle over its tummy
Hi !
I was hoping an answer but it isn't the case.
I'll try to help you, I've spent a lot of hours to recover my phone.
Try to follow this How-to :
http://forum.xda-developers.com/showthread.php?t=2409308
-----------------------
About my problem, I think I don't have any possibilities. Even a factory reset fail.
USB debugging not activated --> Trying by ADB --> ADB need to install Superuser.apk in /data/local/tmp --> This directory has been erased because I've tried a complete flash and all my data are gone but my phone is still bricked.
Trying to Root to flash recovery --> USB debugging not activated --> Unable to root my phone
KDZ Updater fail (maybe because of USB debugging not enabled ?)
I think I'm f**ed (sorry for this bad word but I don't see any possibilites ...)
----------
Dear mudster, if I can help you, I will do my best
Midask said:
Hi !
I was hoping an answer but it isn't the case.
I'll try to help you, I've spent a lot of hours to recover my phone.
Try to follow this How-to :
http://forum.xda-developers.com/showthread.php?t=2409308
-----------------------
About my problem, I think I don't have any possibilities. Even a factory reset fail.
USB debugging not activated --> Trying by ADB --> ADB need to install Superuser.apk in /data/local/tmp --> This directory has been erased because I've tried a complete flash and all my data are gone but my phone is still bricked.
Trying to Root to flash recovery --> USB debugging not activated --> Unable to root my phone
KDZ Updater fail (maybe because of USB debugging not enabled ?)
I think I'm f**ed (sorry for this bad word but I don't see any possibilites ...)
----------
Dear mudster, if I can help you, I will do my best
Click to expand...
Click to collapse
thanks bro we need more people like you in the world
I am going nuts. The recovery crashes at 4 - 5%
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
zebulon98 said:
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
Click to expand...
Click to collapse
Thanks i did that and it worked. Thx to you mate problem solved
LG G5 Bricked
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
mryo said:
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
Click to expand...
Click to collapse
there is an answer by autoprime to your question
autoprime said:
The unique programmers required for the G5 for BoardDiag to work are not public so forcing your way into 9008 won't get you anywhere.
Click to expand...
Click to collapse
with 9008 he means qhsusb_bulk. The drivers you will need are from Qualcomm, once BoardDiag files for G5 are public.
were the boarddiag files ever made public?
Facing the Same problem
I am now facing the above mentioned problem. My g5 h850 doesn't do anything and the only sign of life there is when i connect it to my PC and it picks up as Qualcom hs- usb Qdloader 9008 other than that no display no sound from the handset whatsoever tried getting it into download mode but it won't show anything. I installed all the drivers and tried connecting with lg up but it doesn't pick the phone on any com ports. Is my phone completely damaged or can I do something to bring it back to life. Please help someone
qfil with firehose or octoplus may solve your problem
Can't find the required files anywhere
sbacham said:
qfil with firehose or octoplus may solve your problem
Click to expand...
Click to collapse
QFIL needs PrimaryGPT_0.bin file through firmware extractor but no matter what stock firmware i extract I get multiple patch files like PrimaryGPT_0.bin, PrimaryGPT_1.bin, PrimaryGPT_2.bin, PrimaryGPT_3.bin .......PrimaryGPT_7.bin and when I try to get them through emmc it won't recognize any of the GPT files. That's the step where I am stuck plus I can't seem to find the mbn file for H850
I have lg v20, I too hardbricked my phone, when I extract any kdz I got 7 gpt files. primarygpt0 to primarygpt06 as you said.
are you sure we only need primargpt0 to flash via qfil? i think we need proper firehose/ programmer file and rawprogram file
Maybe I hard bricked mine:
Flashed with uppercut in download mode but with every KDZ file in UPGRADE mode I tried , after the second lg logo with sound of wellcome, it freeze and reboot over and over, it seems that crushes in infinite bootloop. Is this hard bricked?
no, this is not hardbricked. atleast you can enter into download mode.
trash195 said:
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
Click to expand...
Click to collapse
Hi . I I would like to know did you slove your problem ? If yes then what you did plz let me know I’m having same problem with my lgh850.
Referring to this thread https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
I have found a shorter method of unbricking your LG G2 after troubleshooting uppermentioned method for quite some time with no result.
Your phone is stuck at boot in Dload>Download-Mode>Fastboot, mine is LG G2 D802
Your phone will not do Hard Reset when entering recovery and selecting Yes
Windows 10:
- First Install LG G2 Driver. v4.x works fine, I tried many and didn't have any problems in that regard, drivers all work fine
- Download LG Flash Tool 2014, not the fancy new one, but this old version
- Find the most accurate backup .KDZ file of your phone's OS, mine is EU16GB, and the file that worked for me was D80230d_00.kdz. Flashing the wrong rom will result in bootlooping that can be fixed by restarting the process.
1) USB connect your LG G2 in Dload/Fastboot to your PC
2) Run LG Flash Tool 2014 with DEFAULT SETTINGS, press select KDZ file, find the KDZ OEM ROM you found online that matches your phone perfectly, select Normal Flash and click Start
3) Your phone reboots into Firmware Update
Firmware update is the flashing process happening
If it fails you can try again by restarting your phone, or try another KDZ ROM
4) Once the flashing is done the phone restarts itself and boots into the OEM OS
5*) if unsuccessful try a different .kdz, personally I had to try three of them ,_,
i pulled these steps from my memory, i try updating if something is wrong
If I may ask, what do you mean with "1) USB connect your LG G2 in Dload/Fastboot to your PC"?
Could yoiu please elaborate what "in Dload/Fastboot to your PC" means?