Touchscreen not respoding after rooting and installing custom rom - Galaxy S III Q&A, Help & Troubleshooting

when writing the title i saw a similair thread and they said he blew his digitizer, posting this question anyway just to see if somebody can confirm that.
Hallo,
First off some details:
I have a galaxy s3 i9300.
I was attempting to install android 4.4.
Due to "error 7" this was a lot harder then it should have been ( the versions of cwm that i could get to work gave error 7 and newer versions did not load)
Eventually i installed philz touch version 6 wich was able to install this kitkat file: http://forum.xda-developers.com/devdb/project/dl/?id=11372
(back-to-n00t_ROM_V9).
However the screen stopped responding, the solutions found using google (take our battery, factory reset, unscrew the back and check a connector) did not work.
I think i got android 4.4 running, the other buttons work fine and i can acces the recovery and the download mode.
During my process i downloaded a kernel of a s2
(https://emilgeorgejames.wordpress.c...ogenmod-11-kk4-4-4-on-samsung-s-ii-gt-i9100g/)
Which, as far as i can see might be the problem, however i dont know anything about kernels etc. i tried installing s3 kernels from here (http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-stock-kernel-bootloaders-t2189063) which did not solve the problem.
I installed android 4.3 again from here (http://www.sammobile.com/firmwares/database/GT-I9300/), i installed the Netherlands version which had a pda of i9300XUGOL2 and a CSC I9300TNLGOC1 (what ever that means)
Currently i am downloading I9300XXEMG5_I9300ODDEMG1_INU from (http://www.sammobile.com/firmwares/confirm/17479/I9300XXEMG5_I9300ODDEMG1_INU/) since that matches the kernal version i mentioned above.
Take note, i am very new at this, i spend some time today and yesterday trying to get android 4.4 working which is all the experience i have with this subject.
In advance, thank you all for any help you can provide.
I hope i dont have to buy a new phone, i just wanted to play pokemon go

pls help to get below answer from you
*is touch working on recovery mod(philpz touch recovery)
if it working try with cm 13 it gave pure kernel from source.i think you must need to check your digitizer and also pls see this https://www.youtube.com/watch?v=ily16gjJw_Y

dimuthu7 said:
pls help to get below answer from you
*is touch working on recovery mod(philpz touch recovery)
if it working try with cm 13 it gave pure kernel from source.i think you must need to check your digitizer and also pls see this [your link because i cant post links?]
Click to expand...
Click to collapse
Hi thanks for the reply!
The touch screen is not working in recovery, i guess i`ll try installing cm 13 anyway.
I tried what is shown on youtube before and it did not work unfortunaly.

I installed cm13 nightly build from here: download.cyanogenmod.org/?device=i9300
Screen is still unresponsive.

krediax said:
Hi thanks for the reply!
The touch screen is not working in recovery, i guess i`ll try installing cm 13 anyway.
I tried what is shown on youtube before and it did not work unfortunaly.
Click to expand...
Click to collapse
so my bet is you made the phone go to emergency (touch)-firmware flash and it failed... this occures if you flash a wrong kernel or a kernel that was broken due to download (that happens sometimes... thats why there are md5sums out )
we can fix that but first:
MAKE SURE YOU HAVE A i9300 ... then proceed
1. make sure you are on a correct i9300 kernel
2. make sure you are on my latest twrp for i9300
3. make sure to flash latest cm13 official for i9300
if you boot to twrp and the touch dont work then install "minimal adb and fastboot" (no link... google... ) to your PC
then open adb and connect the phone while in twrp
then enter this command in terminal:
adb twrp mount system
adb shell ls /system/etc/
and show me what you see
Sent from my GT-I9300 using XDA Free mobile app

SdtBarbarossa said:
so my bet is you made the phone go to emergency (touch)-firmware flash and it failed... this occures if you flash a wrong kernel or a kernel that was broken due to download (that happens sometimes... thats why there are md5sums out )
we can fix that but first:
MAKE SURE YOU HAVE A i9300 ... then proceed
1. make sure you are on a correct i9300 kernel
2. make sure you are on my latest twrp for i9300
3. make sure to flash latest cm13 official for i9300
if you boot to twrp and the touch dont work then install "minimal adb and fastboot" (no link... google... ) to your PC
then open adb and connect the phone while in twrp
then enter this command in terminal:
adb twrp mount system
adb shell ls /system/etc/
and show me what you see
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
I definitly installed the wrong kernal at one point, cause im stupid and tought what could go wrong?
I tried to follow your steps.
1. i think i have a correct kernal installed now, i instaled one from (forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-stock-kernel-bootloaders-t2189063) i removed the http:// else i cant post the link.
2. i installed 3.0.2-1 for the i9300, however it asks me about unmodified system partitions and to exit that screen i need to have touch screen enabled. It twrp needed or is philz touch / cmw also oke?
3. How do i flash cm13? I have odin but the only cm13 files i could find were either a zip or a recovery.img The zip is on my sd card and installed atm i could reinstall it again from sd card if that also works and then reboot?
thanks for the help

Try to restore your Stock firmware with kies, flash twrp with odin and then install cm13.
Gesendet von meinem LG-H850 mit Tapatalk

krediax said:
I definitly installed the wrong kernal at one point, cause im stupid and tought what could go wrong?
I tried to follow your steps.
1. i think i have a correct kernal installed now, i instaled one from (forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-stock-kernel-bootloaders-t2189063) i removed the http:// else i cant post the link.
2. i installed 3.0.2-1 for the i9300, however it asks me about unmodified system partitions and to exit that screen i need to have touch screen enabled. It twrp needed or is philz touch / cmw also oke?
3. How do i flash cm13? I have odin but the only cm13 files i could find were either a zip or a recovery.img The zip is on my sd card and installed atm i could reinstall it again from sd card if that also works and then reboot?
thanks for the help
Click to expand...
Click to collapse
yea that twrp screen is normal...
we can do EVERYTHING via adb... its really mighty on twrp...
Sent from my GT-I9300 using XDA Free mobile app

YannikM said:
Try to restore your Stock firmware with kies, flash twrp with odin and then install cm13.
Gesendet von meinem LG-H850 mit Tapatalk
Click to expand...
Click to collapse
Did not work
SdtBarbarossa said:
yea that twrp screen is normal...
we can do EVERYTHING via adb... its really mighty on twrp...
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Okay i did the following steps:
back to stock with kies
installed philz touch 6
installed cm13 md5sum: db517fbbacdb167b06f5b483dbdce
installed twrp 3.0.2-1
Now i cant use anything in recovery since i cant go passed the partition system.
Using adb i can give commands and i tried your commands.
However i have no clue what to place on the etc part in: "adb shell ls /system/etc/"
When literally typing that it returns: "ls: /system/etc/: No such file or directory"

krediax said:
Did not work
Okay i did the following steps:
back to stock with kies
installed philz touch 6
installed cm13 md5sum: db517fbbacdb167b06f5b483dbdce
installed twrp 3.0.2-1
Now i cant use anything in recovery since i cant go passed the partition system.
Using adb i can give commands and i tried your commands.
However i have no clue what to place on the etc part in: "adb shell ls /system/etc/"
When literally typing that it returns: "ls: /system/etc/: No such file or directory"
Click to expand...
Click to collapse
it has no scence if you dont listen to me.... i sayd TWRP .... not Philz .... so on Philz that will never work
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 04:56 PM ---------- Previous post was at 04:55 PM ----------
sorry didnt saw last words....
did you do adb twrp mount system before?
Sent from my GT-I9300 using XDA Free mobile app

SdtBarbarossa said:
it has no scence if you dont listen to me.... i sayd TWRP .... not Philz .... so on Philz that will never work
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 04:56 PM ---------- Previous post was at 04:55 PM ----------
sorry didnt saw last words....
did you do adb twrp mount system before?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, that gave back a big list called "Android Debug Bridge version 1.0.36 Revision fd9e4d07b0f5 -android", looking trought that list if found the shell command which said:
adb shell [-e escape] [-n] [-Tt] [-x] [command] - run remote shell command (interactive shell ifno command given)
(-e: choose escape character, or "none"; default '~')
(-n: don't read from stdin)
(-T: disable PTY allocation)
(-t: force PTY allocation)
(-x: disable remote exit codes and stdout/stderr septeration)

krediax said:
Yes, that gave back a big list called "Android Debug Bridge version 1.0.36 Revision fd9e4d07b0f5 -android", looking trought that list if found the shell command which said:
adb shell [-e escape] [-n] [-Tt] [-x] [command] - run remote shell command (interactive shell ifno command given)
(-e: choose escape character, or "none"; default '~')
(-n: don't read from stdin)
(-T: disable PTY allocation)
(-t: force PTY allocation)
(-x: disable remote exit codes and stdout/stderr septeration)
Click to expand...
Click to collapse
adb shell twrp mount system
adb shell ls /system/etc
Sent from my GT-I9300 using XDA Free mobile app

SdtBarbarossa said:
adb shell twrp mount system
adb shell ls /system/etc
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
That did something.
These are the results:
D:\Programs\Android-sdk\android-sdk\platform-tools>adb shell ls /system/etc
CHANGELOG-CM.txt media_codecs_google_audio.xml
CHANGES.txt media_codecs_google_telephony.xml
NOTICE.html.gz media_codecs_google_video.xml
apns-conf.xml media_profiles.xml
audio_effects.conf mkshrc
audio_policy.conf nano
bash nfcee_access.xml
bluetooth permissions
build-manifest.xml ppp
clatd.conf preloaded-classes
dhcpcd recovery-resource.dat
event-log-tags security
excluded-input-devices.xml sound
fallback_fonts.xml srm.bin
fonts.xml ssh
gps.conf sysconfig
gps.xml system_fonts.xml
hosts terminfo
init.d updatecmds
media_codecs.xml vimrc
media_codecs_ffmpeg.xml wifi
edit: I added spaces to make things more organised but that didn`t seem to work.

will look deper when im home... that command was just to make sure you have acess to a running system... will need to find the correct touchfirmware updater for sgs3
Sent from my GT-I9300 using XDA Free mobile app

SdtBarbarossa said:
will look deper when im home... that command was just to make sure you have acess to a running system... will need to find the correct touchfirmware updater for sgs3
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
I googled a bit on touch firm ware updater, there are a couple of links.
Not going to install anyting tough, going to wait what you think since it seems like you know what you are talking about!

krediax said:
I googled a bit on touch firm ware updater, there are a couple of links.
Not going to install anyting tough, going to wait what you think since it seems like you know what you are talking about!
Click to expand...
Click to collapse
ok so on sony devices (wich uses rmi4 ) you can flash it directly... on your samsung thats not possible... because you use tsp_malfes .... BUT
1. flash a full stockrom ( for your device !!!)
2. get a usb otg mouse and connect
3. use the mouse to controll your phone now
4. go to dialer and type *#*#2663#*#
this should initialise a touchscreen firmware update
if it suceed... your touch should work after reboot
if it suceeded and your touch doesnt work after reboot it is maybe burned due to overvoltage
if it failed give me the error message
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 09:51 PM ---------- Previous post was at 09:15 PM ----------
ah and btw make sure to activate wifi before
Sent from my GT-I9300 using XDA Free mobile app

SdtBarbarossa said:
ok so on sony devices (wich uses rmi4 ) you can flash it directly... on your samsung thats not possible... because you use tsp_malfes .... BUT
1. flash a full stockrom ( for your device !!!)
2. get a usb otg mouse and connect
3. use the mouse to controll your phone now
4. go to dialer and type *#*#2663#*#
this should initialise a touchscreen firmware update
if it suceed... your touch should work after reboot
if it suceeded and your touch doesnt work after reboot it is maybe burned due to overvoltage
if it failed give me the error message
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 09:51 PM ---------- Previous post was at 09:15 PM ----------
ah and btw make sure to activate wifi before
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
It never started the update, it gave an error called:
Connection Problem or Invalid MMI Code
I could try to bypass it by using method 2 mentioned here: http://www.technobezz.com/fix-connection-problem-invalid-mmi-code/
Which is to add + signs after every *. However i dont know if thats a smart thing to do.
edit: I called somebody to make sure i dont have connection problems.

krediax said:
It never started the update, it gave an error called:
Connection Problem or Invalid MMI Code
I could try to bypass it by using method 2 mentioned here: http://www.technobezz.com/fix-connection-problem-invalid-mmi-code/
Which is to add + signs after every *. However i dont know if thats a smart thing to do.
edit: I called somebody to make sure i dont have connection problems.
Click to expand...
Click to collapse
are you on wifi?
Sent from my GT-I9300 using XDA Free mobile app

SdtBarbarossa said:
are you on wifi?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Yes i am

krediax said:
Yes i am
Click to expand...
Click to collapse
then maybe try that + stuff... i guess your verification number of touch is broken (mmi)
Sent from my GT-I9300 using XDA Free mobile app

Related

[ROOT]LG Optimus One P500 Easy Rooting Tool 2.3.3

Root LG P500 Fast
this tool was originally created for the lg p350, but some people tried it on their p500's and it worked
I post here so all of you can root your devices with only a few clicks
Disclaimer
I am NOT responsible for any bricked devices, dead SD-cards, or any misfortunes that happen to you
This tool is fool proof, and if doesn't work, then YOU have broken it, YOUR phone was already bricked, or YOU Haven't followed the instructions properly
Do not Blame any developer for any problems. If it bricks devices, then it won't be published
Click to expand...
Click to collapse
You do not need to boot into fastboot. All instructions are given to you as you work
If your device can't be detected then it will go through checks, such as seeing if pc can see the device (windows 7 only)
It will also download and install the drivers for you silently if your computer doesn't have them, or if they are not working correctly
To use
download the zip here
extract to where ever you want
run "antdking's p500 rooting tool.bat" (could be called "antdking's p500 rooting tool" depending on your system)
follow the steps
If anyone wants to suggest features, post on here
If anyone wants to alter code, or add code (only if you know what you are doing), then send the suggestions to me, I will check them and add them
If people from other phones use this and it works, please post on here, or the original thread and I will post it into your forum as well
enjoy
download
sorry if this is in the wrong place as well
finally you come here your tool is really awesome, i rooted my dad p500 by your tool.
ron gokhle said:
finally you come here your tool is really awesome, i rooted my dad p500 by your tool.
Click to expand...
Click to collapse
It might also root the optimus hub as well
in fact, most phones that can be rooted with superoneclick should be able to be rooted with this
Didn't worked for me
Hello.
This didn't worked for me.
I've installed the driver, run the script, it recognized my device, it rebooted the devices, debugging is enabled, and it stalls on "pushing rooting script".
Cheers!
indispus said:
Hello.
This didn't worked for me.
I've installed the driver, run the script, it recognized my device, it rebooted the devices, debugging is enabled, and it stalls on "pushing rooting script".
Cheers!
Click to expand...
Click to collapse
Hmm I don't know. You could try it again? I've not got time to work on this any more, sorry
Sent from my LG-P350 using xda app-developers app
antdking said:
Hmm I don't know. You could try it again? I've not got time to work on this any more, sorry
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Use "unlock root" (google it), just install the program and click "root" while the cellphone is connected to the PC.
Issue
Thanks for putting this together antdking
I came across an issue rooting my LG Optimus One with it, the batch script gave an error with something like "invalid option for su: --install"
Fixed it by adding single-quotes around the busybox command on line 409 like this:
adb -d wait-for-device shell "su -c '/system/bin/busybox --install -s /system/bbin'"
beefmusta said:
Thanks for putting this together antdking
I came across an issue rooting my LG Optimus One with it, the batch script gave an error with something like "invalid option for su: --install"
Fixed it by adding single-quotes around the busybox command on line 409 like this:
adb -d wait-for-device shell "su -c '/system/bin/busybox --install -s /system/bbin'"
Click to expand...
Click to collapse
Ah yes, thank you. I ran into this issue on the p350 tool, I just never merged it onto the p500 tool.
Sent from my LG-P350 using xda app-developers app
Anyone try this on a fully updated p506 from ATT?
j0j081 said:
Anyone try this on a fully updated p506 from ATT?
Click to expand...
Click to collapse
Not tried, but it should work on all optimus devices up to LG e400 (l3)
Sent from my LG-P350 using xda app-developers app
I am not working on Android any more. Mods please close this thread and clear the thread.
Thank you.
Sent from my LG-P350 using xda app-developers app
My friend rooted his phone with your tool successfully working greatly:thumbup:
Sent from my LG-P500 using xda premium
i have rooted my phone ..... but am unable to reboot in recovery to take a nandroid backup.... to rebbot in recovery i tried terminal emulator but phone restarts and formats then i tried key combination i.e volumeup+home+power switch but the phone formats again then i also tried volumedown+home+power but the phone restarts and everything is formatted again il all cases ...can u help me with it..... is any other tool available using which i can install recovery on my lg p500..... plz help....
blueneel said:
i have rooted my phone ..... but am unable to reboot in recovery to take a nandroid backup.... to rebbot in recovery i tried terminal emulator but phone restarts and formats then i tried key combination i.e volumeup+home+power switch but the phone formats again then i also tried volumedown+home+power but the phone restarts and everything is formatted again il all cases ...can u help me with it..... is any other tool available using which i can install recovery on my lg p500..... plz help....
Click to expand...
Click to collapse
Get rom manager app from the Google play store,which will allow you to flash a custom recovery.
Does that help?
Sent from my LG-P500 using xda app-developers app
lg-one-man said:
Get rom manager app from the Google play store,which will allow you to flash a custom recovery.
Does that help?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Don't get rom manager app. It bricks your phone now
Sent from my LG-P350 using xda app-developers app
so i just need to root it and then i have recovery?
and if i wanna install CM7 just flash it?
ilay47 said:
so i just need to root it and then i have recovery?
and if i wanna install CM7 just flash it?
Click to expand...
Click to collapse
No. Rooting will only allow you to flash a custom recovery, which you need to do seperately after rooting.
Options for Custom Recoveries -
1) AmonRa 2) TWRP 3) CWM
I use AmonRa which I find most stable & functional. CWM installation from ROM manager could brick your phone.
Once you have installed your recovery, then you can flash any custom ROM you like from this forum.
Hope this helps.:good:
Why not Gingerbreak? One click root and unroot.....just an apk will do.
Sorry for my bad English.
Sent from my LG-P500
for lg optimus net p690?
---------- Post added at 10:38 PM ---------- Previous post was at 10:33 PM ----------
nice
No USB
My problem is USB port is not getting recognized in my P500 phone ... only charging, No Mass Storage functionality works. So gotto try somethin on mobile itself ... Thanks anyways for ur suggestion.
zeratos said:
Use "unlock root" (google it), just install the program and click "root" while the cellphone is connected to the PC.
Click to expand...
Click to collapse
---------- Post added at 01:25 PM ---------- Previous post was at 01:19 PM ----------
Problem is PC does not recognize my phone's USB port ... Phone will only charge if I connect the USB cable. No Mass Storage functionality. Struggling to root ... looking for on mobile tool ... GingerBreak not getting downloaded fully, only 32.2 KB is getting installed from all provided links ...looking for OneClickRoot or other tool ... search goes on .. will surely root it soon ... thanks for all ur instructions ...
antdking said:
Root LG P500 Fast
this tool was originally created for the lg p350, but some people tried it on their p500's and it worked
I post here so all of you can root your devices with only a few clicks
You do not need to boot into fastboot. All instructions are given to you as you work
If your device can't be detected then it will go through checks, such as seeing if pc can see the device (windows 7 only)
It will also download and install the drivers for you silently if your computer doesn't have them, or if they are not working correctly
To use
download the zip here
extract to where ever you want
run "antdking's p500 rooting tool.bat" (could be called "antdking's p500 rooting tool" depending on your system)
follow the steps
If anyone wants to suggest features, post on here
If anyone wants to alter code, or add code (only if you know what you are doing), then send the suggestions to me, I will check them and add them
If people from other phones use this and it works, please post on here, or the original thread and I will post it into your forum as well
enjoy
download
sorry if this is in the wrong place as well
Click to expand...
Click to collapse

[Solved] Official JB LS8 - Lock screen / Power Button not working

Hi guys,
As title says, I just lost my lock screen after flashing the official jb. After made few tests and feedback from various people, here what I've done to solve my problem. I just want to share with everyone. So I'm making this guide as noob as I can.
All this done from terminal apps (download from play store) and yes, rooted phone is mandatory. Type in to terminal emulator everything I wrote below (each line mean new command, press enter to execute):
su
cp /efs/imei/keystr /efs/imei/keystr.bak
echo ON >> /efs/imei/keystr
chmod 0744 /efs/imei/keystr
chown 1000.1000 /efs/imei/keystr
reboot
p/s: you might received an error after entered cp command because you don't have any keystr file, so just ignore it. If no error, mean you just created backup file of keystr named keystr.bak, you can restore it later by using this command:
mv /efs/imei/keystr.bak /efs/imei/keystr
kunterk said:
Hi guys,
As title says, I just lost my lock screen after flashing the official jb. Below are the details:
1) using cm10.1
2) full wipe (using full wipe script zip as downloaded from apriliam3)
3) installed official jb from odin
> at this point, I started to lose my lock screen
4) afraid of this bug came from cm10.1, I tried to flash wanam leaked jb, and the lock screen just fine.
5) So after waiting for wanam to release his v14, I flashed again and the bug say hi again to me.
Got pissed off, I even try to use so many type of wipe, from philz to nukewipe.
Yes, I can get my lock screen from any other rom except from this official jb based.
Hope someone can answer this or at least give me some idea.
p/s: sorry to mentioned name above, I love your work, but I can't post directly to your thread as I don't have enough privilege to post there.
p/ss:sorry for my bad English
Cheers.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
What you mean you lost your lockscreen?
And by Official JB you mean Stock Official 4.1.2?
Re: Official JB - Lock screen not working
gastonw said:
What you mean you lost your lockscreen?
And by Official JB you mean Stock Official 4.1.2?
Click to expand...
Click to collapse
I'm unable to lock my screen. I've used stock official LS8, wanam LS8 based and neat LS8. Seems the problem just with LS8 but not with LSJ
Sent from my GT-I9100 using xda app-developers app
kunterk said:
I'm unable to lock my screen. I've used stock official LS8, wanam LS8 based and neat LS8. Seems the problem just with LS8 but not with LSJ
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Did you check the lock screen settings?
If so, flash stock 4.1.2 (now that is hot).
Oh....you already been there. That's not a bug, no bug can be present in 3 diffrent roms.
Re-flash, wipe all data & see if it pops up again.
Latest result
gastonw said:
Did you check the lock screen settings?
If so, flash stock 4.1.2 (now that is hot).
Oh....you already been there. That's not a bug, no bug can be present in 3 diffrent roms.
Re-flash, wipe all data & see if it pops up again.
Click to expand...
Click to collapse
yeah, i think so, maybe it's my device. just now i re-flashed LSJ(oxx) with PIT, yes, i re-partitioned and re-formatted my internal-sd as well, booted and everything working fine. so i decided to give one more chance to LS8(oxx) and the result as expected. now, again, reverting back to LSJ and not planning to install LS8 yet.
here the new thing that i found out when i'm using LS8,
- my power button act weird, it's not just can't lock the screen, but even mid-long press will directly reboot my device(suppose power menu will come out right?)
btw thanks man.
Re: Official JB - Lock screen not working
np man.
just so we're clear.....you get your lockscreen in jb leak? not in ls8....am I right?
Keep away from that spanish ROM then.
Man..I too am thinking about going back to leakland...no media scanner there
Sent from the little guy
Re: Official JB - Lock screen not working
Yeah, just finished setting up my leaky rom.
Everything working fine now. So, from my made up theory, the Europe rom might not works well with my Asia device (lsj is global build). Maybe I should give a shot for China rom or I'll just wait for Singapore rom.
Sent from my GT-I9100 using xda app-developers app
Re: Official JB - Lock screen not working
what you got there? i9100g?
Sent from the little guy
Re: Official JB - Lock screen not working
gastonw said:
what you got there? i9100g?
Sent from the little guy
Click to expand...
Click to collapse
Nope, I9100.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
Nope, I9100.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
After flashing the stock rom in ODIN go back into download mode and flash Siyah v6 beta4, boot into recovery and then do a wipe data/factory reset. This should fix the lock screen issue.
If not just flash latest Wannam rom, Its better then stock sammy anyway.
Re: Official JB - Lock screen not working
TheATHEiST said:
After flashing the stock rom in ODIN go back into download mode and flash Siyah v6 beta4, boot into recovery and then do a wipe data/factory reset. This should fix the lock screen issue.
If not just flash latest Wannam rom, Its better then stock sammy anyway.
Click to expand...
Click to collapse
Thanks mate, but I've done exactly as what you suggested and just they don't work with my phone.
p/s: Actually I don't really mind now. Switched back to Samsung 4.1 just because of it's most "workable" mail app, splanner and I love the Samsung keyboard with swipe function which has multi languages support.
Sent from my GT-I9100 using xda app-developers app
see this : http://forum.xda-developers.com/showthread.php?t=1611796
P.S MAKE A BACKUP!
I had some problem on stock 4.0.4
This worked
Re: Official JB - Lock screen not working
Qwerty123 \m/ said:
see this : http://forum.xda-developers.com/showthread.php?t=1611796
P.S MAKE A BACKUP!
I had some problem on stock 4.0.4
This worked
Click to expand...
Click to collapse
Something new for me to try. Excited mode activated. LOL
Sent from my GT-I9100 using xda app-developers app
solved
Qwerty123 \m/ said:
see this : http://forum.xda-developers.com/showthread.php?t=1611796
P.S MAKE A BACKUP!
I had some problem on stock 4.0.4
This worked
Click to expand...
Click to collapse
:good: so many thanks for your hint. after reading linked post, i did some search for /efs of i9100 device and got the correct path:
# /efs/imei/keystr
Same issue !
kunterk said:
yeah, i think so, maybe it's my device. just now i re-flashed LSJ(oxx) with PIT, yes, i re-partitioned and re-formatted my internal-sd as well, booted and everything working fine. so i decided to give one more chance to LS8(oxx) and the result as expected. now, again, reverting back to LSJ and not planning to install LS8 yet.
here the new thing that i found out when i'm using LS8,
- my power button act weird, it's not just can't lock the screen, but even mid-long press will directly reboot my device(suppose power menu will come out right?)
btw thanks man.
Click to expand...
Click to collapse
I face same issue as described above. No lock and pressing power key for long gives reboot. I just flashed official LS8 using Odin 1 day back. I had same problem with 4.0.3. In addition to that, FM Radio doesn't pick up any station. Applications resets to default doesn't reset. Thank you.
---------- Post added at 11:31 PM ---------- Previous post was at 11:19 PM ----------
kunterk said:
:good: so many thanks for your hint. after reading linked post, i did some search for /efs of i9100 device and got the correct path:
# /efs/imei/keystr
Click to expand...
Click to collapse
I am noob here. Learning from this forum. I shall be very thankful if could spare few minutes and help me with steps you have taken to resolve the issue. Thank you.
Help please !
kunterk said:
Hi guys,
As title says, I just lost my lock screen after flashing the official jb. Below are the details:
1) using cm10.1
2) full wipe (using full wipe script zip as downloaded from apriliam3)
3) installed official jb from odin
> at this point, I started to lose my lock screen
4) afraid of this bug came from cm10.1, I tried to flash wanam leaked jb, and the lock screen just fine.
5) So after waiting for wanam to release his v14, I flashed again and the bug say hi again to me.
Got pissed off, I even try to use so many type of wipe, from philz to nukewipe.
Yes, I can get my lock screen from any other rom except from this official jb based.
Hope someone can answer this or at least give me some idea.
p/s: sorry to mentioned name above, I love your work, but I can't post directly to your thread as I don't have enough privilege to post there.
p/ss:sorry for my bad English
Cheers.
Sent from my GT-I9100 using xda app-developers app
edit:
i will write down as simple as i can on how to fix this issue. first of all, u will need a rooted rom / kernel. in my case, i've flashed this wipe script, wanamlite v14, dorimanx kernel and installed terminal (from PlayStore)
my steps:
open terminal and login as root: $ su
go to /efs/imei/ folder: # cd /efs/imei
check if keystr file exist: # ls
if you can see keystr listed, just remove it: # rm keystr or...
if you can't see it, just create new keystr file: # touch keystr
edit your keystr: # vi keystr
in vi editor, prees "i" and type "ON" without quote and save it by pressing "Volume Up + E" and type in ":wq!" without quote and yes, with colon
now just reboot by type in terminal : # reboot
much easier method that i can think so far(i don't use this method as i'm too lazy to install root explorer):
install root explorer (from Play Store)
go to root folder "/" and find efs >> imei
when you in there, if you find keystr file, just delete it and make new file by pressing + icon (as far as i remember)
then click the file and choose edit. use your favourite text editor. type in ON and save
reboot your phone
and now, you are good to go and play with your power button all night...:silly:
Click to expand...
Click to collapse
I face the same issue as yours. I am a newbie and hence I chose second method as you've suggested. I have installed MI Root Explorer. I could find efs but cant find imei. It says either the folder has no data or I dont have access. Thank you.
keyur1401 said:
I face the same issue as yours. I am a newbie and hence I chose second method as you've suggested. I have installed MI Root Explorer. I could find efs but cant find imei. It says either the folder has no data or I dont have access. Thank you.
Click to expand...
Click to collapse
Is your phone rooted? If yes, try open supersu for first time for it dowload su binaries then open your root browser again.
edit: saw u posted asking bout fm radio. I never get it working since the first day I bought this phone and I don't think it will. The application reset not working? Have you tried to reset from cwm?
Sent from my GT-I9100 using xda app-developers app
kunterk said:
Is your phone rooted? If yes, try open supersu for first time for it dowload su binaries then open your root browser again.
edit: saw u posted asking bout fm radio. I never get it working since the first day I bought this phone and I don't think it will. The application reset not working? Have you tried to reset from cwm?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply. No, my phone is not rooted. I shall do it using Siyah-s2-v60b4.tar. Then I shall follow your advise. Hope this works. Thank you.
Further help !
keyur1401 said:
Thanks for the reply. No, my phone is not rooted. I shall do it using Siyah-s2-v60b4.tar. Then I shall follow your advise. Hope this works. Thank you.
Click to expand...
Click to collapse
I have rooted my phone and I could see three apps SuperSU, CWM and STweaks. The SuerSU hasn't downloaded the binaries. What should I do next ? Thanks in advance.
---------- Post added 28th January 2013 at 12:04 AM ---------- Previous post was 27th January 2013 at 11:18 PM ----------
kunterk said:
Hi guys,
As title says, I just lost my lock screen after flashing the official jb. Below are the details:
1) using cm10.1
2) full wipe (using full wipe script zip as downloaded from apriliam3)
3) installed official jb from odin
> at this point, I started to lose my lock screen
4) afraid of this bug came from cm10.1, I tried to flash wanam leaked jb, and the lock screen just fine.
5) So after waiting for wanam to release his v14, I flashed again and the bug say hi again to me.
Got pissed off, I even try to use so many type of wipe, from philz to nukewipe.
Yes, I can get my lock screen from any other rom except from this official jb based.
Hope someone can answer this or at least give me some idea.
p/s: sorry to mentioned name above, I love your work, but I can't post directly to your thread as I don't have enough privilege to post there.
p/ss:sorry for my bad English
Cheers.
Sent from my GT-I9100 using xda app-developers app
edit:
i will write down as simple as i can on how to fix this issue. first of all, u will need a rooted rom / kernel. in my case, i've flashed this wipe script, wanamlite v14, dorimanx kernel and installed terminal (from PlayStore)
my steps:
open terminal and login as root: $ su
go to /efs/imei/ folder: # cd /efs/imei
check if keystr file exist: # ls
if you can see keystr listed, just remove it: # rm keystr or...
if you can't see it, just create new keystr file: # touch keystr
edit your keystr: # vi keystr
in vi editor, prees "i" and type "ON" without quote and save it by pressing "Volume Up + E" and type in ":wq!" without quote and yes, with colon
now just reboot by type in terminal : # reboot
much easier method that i can think so far(i don't use this method as i'm too lazy to install root explorer):
install root explorer (from Play Store)
go to root folder "/" and find efs >> imei
when you in there, if you find keystr file, just delete it and make new file by pressing + icon (as far as i remember)
then click the file and choose edit. use your favourite text editor. type in ON and save
reboot your phone
and now, you are good to go and play with your power button all night...:silly:
Click to expand...
Click to collapse
Dear Friend, I've reached there almost but the vi command not found. I have rooted my phone, added a terminal and done everything as you have directed. Any help, please ? Thanks in advance.
keyur1401 said:
I have rooted my phone and I could see three apps SuperSU, CWM and STweaks. The SuerSU hasn't downloaded the binaries. What should I do next ? Thanks in advance.
---------- Post added 28th January 2013 at 12:04 AM ---------- Previous post was 27th January 2013 at 11:18 PM ----------
Dear Friend, I've reached there almost but the vi command not found. I have rooted my phone, added a terminal and done everything as you have directed. Any help, please ? Thanks in advance.
Click to expand...
Click to collapse
Suppose the vi is the most basic text editor. You also can use echo as replacement. Eg. echo ON >> /efs/imei/keystr
Additional, you can set this too, just to make sure system can use it properly:
chmod 0744 /efs/imei/keystr
chown 1000.1000 /efs/imei/keystr
Do this to factorymode as well. Hope this solve yours.
Sent from my GT-I9100 using xda app-developers app

[Q] What am I doing wrong?

Hello. I am new to forums in general. In fact I made this account just now so I can get some help as I cannot seem to find an answer anywhere.
I am trying to flash clockworkmod to my Galaxy S4. I have successfully rooted with the help of Odin and Motochopper. I downloaded Rom Manager from the playstore and used it to flash(?) CWM 6.0.4.4. When I try to boot into recovery a yellow triangle with an exclamation point appears with the text, "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." In the top left corner of my screen it also says Secure Fail: Kernel. If I reboot into download mode and press the volume key down, my phone resets and boots up normally. What is going on?
I have tried using these methods but they don't work.
http://forum.xda-developers.com/showthread.php?t=2292112
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
http://www.sxtpdevelopers.com/showthread.php?t=257
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
I have SU (#) access in Terminal Emulator.
I have also been following this guide here:
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
but the prepare and flash recovery image step makes no sense to me.
My SuperSU is up to date. My rootchecker also states that I have root access.
I have version MDK.
Can anyone help me please?
Tiraniss said:
Hello. I am new to forums in general. In fact I made this account just now so I can get some help as I cannot seem to find an answer anywhere.
I am trying to flash clockworkmod to my Galaxy S4. I have successfully rooted with the help of Odin and Motochopper. I downloaded Rom Manager from the playstore and used it to flash(?) CWM 6.0.4.4. When I try to boot into recovery a yellow triangle with an exclamation point appears with the text, "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." In the top left corner of my screen it also says Secure Fail: Kernel. If I reboot into download mode and press the volume key down, my phone resets and boots up normally. What is going on?
I have tried using these methods but they don't work.
http://forum.xda-developers.com/showthread.php?t=2292112
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
http://www.sxtpdevelopers.com/showthread.php?t=257
I have done everything this post has told me to do yet when I input the commands into Terminal Emulator it tells me that the files do not exist.
I have SU (#) access in Terminal Emulator.
I have also been following this guide here:
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
but the prepare and flash recovery image step makes no sense to me.
My SuperSU is up to date. My rootchecker also states that I have root access.
I have version MDK.
Can anyone help me please?
Click to expand...
Click to collapse
Try downloading Goo Manager from the Play store. Hit the menu button, click install open recovery.
yofife2069 said:
Try downloading Goo Manager from the Play store. Hit the menu button, click install open recovery.
Click to expand...
Click to collapse
I agree. What he's referring to is installing TWRP 2.6.3.1. The easiest way is the method he described. The normal method is here: http://teamw.in/project/twrp2/181
yofife2069 said:
Try downloading Goo Manager from the Play store. Hit the menu button, click install open recovery.
Click to expand...
Click to collapse
WhoNeedszzz said:
I agree. What he's referring to is installing TWRP 2.6.3.1. The easiest way is the method he described.
I'm sorry. I forgot to mention that I have tried using Goo Manager. It does the same thing as ROM manager.
Sorry for taking the link out of WhoNeedszzz post, but it wouldn't let me post with one until I have posted 10 or more times.
Click to expand...
Click to collapse
Tiraniss said:
WhoNeedszzz said:
I agree. What he's referring to is installing TWRP 2.6.3.1. The easiest way is the method he described.
I'm sorry. I forgot to mention that I have tried using Goo Manager. It does the same thing as ROM manager.
Sorry for taking the link out of WhoNeedszzz post, but it wouldn't let me post with one until I have posted 10 or more times.
Click to expand...
Click to collapse
I'd say it's because the file is in your download folder. Not in the path the post uses. Direct the path to your dl folder
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:51 PM ---------- Previous post was at 09:44 PM ----------
Also could try to odin one of the no wipe for mdk tar in android development. Puts to stock. Start over. It odin one with root pre-installed. Mdk of course
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
Or could odin one with root pre-installed is was what I meant to say
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mightycaptain said:
Tiraniss said:
I'd say it's because the file is in your download folder. Not in the path the post uses. Direct the path to your dl folder
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:51 PM ---------- Previous post was at 09:44 PM ----------
Also could try to odin one of the no wipe for mdk tar in android development. Puts to stock. Start over. It odin one with root pre-installed. Mdk of course
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
Or could odin one with root pre-installed is was what I meant to say
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So to use rom and goo manager I need to download the cwm or twrp file? I thought the apps did that themselves. As for using odin.. where can I find a pre rooted stock rom?
Click to expand...
Click to collapse
Tiraniss said:
Mightycaptain said:
So to use rom and goo manager I need to download the cwm or twrp file? I thought the apps did that themselves. As for using odin.. where can I find a pre rooted stock rom?
Click to expand...
Click to collapse
If your rooted. Put the twrp image at the root of your sdcard. Internal storage.use terminal emulator to flash it. The link above in the earlier post will direct you to the twrp site. Choose direct download. But below that it has instructions for how to flash twrp via terminal emulator. I recommend version 2.5.0.2. Not the latest.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mightycaptain said:
Tiraniss said:
If your rooted. Put the twrp image at the root of your sdcard. Internal storage.use terminal emulator to flash it. The link above in the earlier post will direct you to the twrp site. Choose direct download. But below that it has instructions for how to flash twrp via terminal emulator. I recommend version 2.5.0.2. Not the latest.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you so much! I now have TWRP 2.5.0.2 recovery. I have also successfully flashed Cyanogen Mod 10.2 to my phone. Now my only problem is... My 3g doesn't work? My wifi is just fine. I have the 3g option enabled as well. I am also unable to send text messages yet I can receive them. I can also make and receive phone calls.
NEVER MIND! I restarted my phone and now my 3g and texting work just fine I love you so much mightycaptain.. Can I have your babies?
Click to expand...
Click to collapse
Tiraniss said:
Mightycaptain said:
Thank you so much! I now have TWRP 2.5.0.2 recovery. I have also successfully flashed Cyanogen Mod 10.2 to my phone. Now my only problem is... My 3g doesn't work? My wifi is just fine. I have the 3g option enabled as well. I am also unable to send text messages yet I can receive them. I can also make and receive phone calls.
NEVER MIND! I restarted my phone and now my 3g and texting work just fine I love you so much mightycaptain.. Can I have your babies?
Click to expand...
Click to collapse
Came here to say, just in case someone else cannot follow the steps described by mightycaptain you can flash back to stock and start over. My personal savior is a the VRUAMDK_NoWipe.tar. You can pick it up here: http://galaxys4root.com/galaxy-s4-stock-firmware/
NOTE: Flashing back to stock does not always work and can make things worse depending on your situation. USE the forum search function before you flash.:highfive:
Click to expand...
Click to collapse

[Q] Is there any way to unbrick HTC Desire X?

..
Really noone can help? I am really worried, i know that i shouldnt do something which i dont completly understand, i am stupid. I really just want my phone back, even without root. As i mentioned before, I have PhillZ Touch 5 (CWM v6.0.3.7) recovery and acces to bootloader. My CID is T-Mob009.
Could you please tell me at least if this is fixable? Can i go to my local phone service and they will fix it for me? Or can i do something at home?
jeryh160 said:
Really noone can help? I am really worried, i know that i shouldnt do something which i dont completly understand, i am stupid. I really just want my phone back, even without root. As i mentioned before, I have PhillZ Touch 5 (CWM v6.0.3.7) recovery and acces to bootloader. My CID is T-Mob009.
Could you please tell me at least if this is fixable? Can i go to my local phone service and they will fix it for me? Or can i do something at home?
Click to expand...
Click to collapse
it's still can be fix it, not a big problem
maybe you can try reinstall the stock rom
Don't go to local phone service, they can't help
Just find a ROM specific for your phone (search xda for desire x) and put it on sdcard. Either with an external SD reader or through recovery. Then wipe all in recovery, then flash ROM and gapps if needed
Then reboot
Sent from my Nexus 7 using XDA Premium 4 mobile app
jeryh160 said:
Long story short: I think i bricked my HTC Desire X. After rooting (succesful) i tried to remove stock T-Mobile apps. They were re-installing after reboot. I did some research and found many solutions, one of them was to install custom kernel. So, i grabbed neXusKERNELv3 and using WinDroid HTC Desire X Toolkit (Fastboot Commands > Flash > System Image) i flashed .img file to my phone. After rebooting nothing happens - HTC quietly brilliant logo, vibration and blank black screen.
One of the solutions of this problem i found in the internet was to install custom rom, but to do so, i have to acces my sd card, which i cant.
I have acces to bootloader and recovery (phillaz touch 5).
Anyone can help me? I'm noob, i just wanted to get rid of those annoying T-Mobile apps!
Thanks in advance and sorry for my bad English, im not native english speaker.
Update: I turned on the phone and left it alone for some time - after HTC logo and black screen nothing happens for some time and then htc logo appears again, and there is black screen again.
Click to expand...
Click to collapse
Dude one thing, your phone isin't bricked and you said you have Phiz touch recovery right? You can mount your SD card from there (I believe) then...
Before you do any of these make sure you have an unlocked phone (I know you said it. Rooted and unlocked bootloader), java and hansoon 2000's toolkir (optional, if you don't want to use CMD.) and an updated phone (you should have the 1.25 Hboot by now.)
1. Download a ROM and extract the boot.img to the folder where you have "fastboot.exe"
2. Boot your phone to recovery then mount your SD card from there.
3. Copy the ROM on to your SD card. (Oh you know that.)
4. Reboot back to bootloader and select fastboot
5. Plug your phone to your computer using a USB cable and open a command prompt window (CMD)
6. Type the following codes...
Code:
fastboot devices
Then
Code:
fastboot erase cache
And finally
Code:
fastboot flash boot (name_of_image).img
7. BACK UP YOUR STOCK ROM
8. Do a wipe data/factory reset
9. Wipe dalvik cache.
10. Flash the ROM that you placed in your SD card.
I hope it worked lol. Goodluck bro!
In addition if you don't have card reader
1. Flash TWRP or CWM recovery
2. From recovery open "ADB Sideload"
3. Flash the rom.zip with ADB sideload
For more info: http ://android-revolution-hd.blogspot.com.tr/2013/12/ow-to-use-adb-sideload.html
4. Flash kernel (boot.img) via fastboot
Done
I cant believe i was such a dumbass and i didnt think about THAT simple solution earlier! Anyway, my phone's working again thanks to you. IDK why flashing a kernel through that tool i mentioned in 1st post didnt work, but nevermind. Thank you again and have a good day!
jeryh160 said:
I cant believe i was such a dumbass and i didnt think about THAT simple solution earlier! Anyway, my phone's working again thanks to you. IDK why flashing a kernel through that tool i mentioned in 1st post didnt work, but nevermind. Thank you again and have a good day!
Click to expand...
Click to collapse
Friend,
can you tell me what should I exactly do. My problem is as same as you!
Where can I download flashable zip?
---------- Post added at 09:28 AM ---------- Previous post was at 09:02 AM ----------
jeryh160 said:
I cant believe i was such a dumbass and i didnt think about THAT simple solution earlier! Anyway, my phone's working again thanks to you. IDK why flashing a kernel through that tool i mentioned in 1st post didnt work, but nevermind. Thank you again and have a good day!
Click to expand...
Click to collapse
Friend,
please let me know where can I download ROM and boot.img files. Then I can execute same steps ..
thanks for advance
anybody there to help me?
veerusayz said:
anybody there to help me?
Click to expand...
Click to collapse
Just choose a ROM from Android General Section and download it; also you can choose a kernel from Original Android development.
i don't know which ROM to download. can you pls share me the trusted ROM link so that I can download
Why people having problems when they flash kernel through toolkits? Any reason?
Sent from my HTC Desire X using xda app-developers app
veerusayz said:
i don't know which ROM to download. can you pls share me the trusted ROM link so that I can download
Click to expand...
Click to collapse
Download any jb Rom u like. See the screenshots of every rom & download the one which u want.
veerusayz said:
i don't know which ROM to download. can you pls share me the trusted ROM link so that I can download
Click to expand...
Click to collapse
Go to android development section where you can find various roms like this
http://forum.xda-developers.com/sho...ENSE-dx5 1.02 (04-01-2014) JB 4.1.2 | Sense 5
Sent from my HTC Desire X using xda app-developers app
Thanks
I tried to install following
http://d-h.st/Jk5
I got installation aborted error..what is the issue?
---------- Post added at 05:02 AM ---------- Previous post was at 04:21 AM ----------
Anybody there to help me...pls give quick replies..
veerusayz said:
Thanks
I tried to install following
http://d-h.st/Jk5
I got installation aborted error..what is the issue?
---------- Post added at 05:02 AM ---------- Previous post was at 04:21 AM ----------
Anybody there to help me...pls give quick replies..
Click to expand...
Click to collapse
What device do you have? Boot into bootloader and write down everything on that screen here
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
What device do you have? Boot into bootloader and write down everything on that screen here
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi Im using htc desire x...
what do you mean by Boot into bootloader and write down everything on that screen here...sorry for my ignorance..im new to this
Read this thread thoroughly and this will explain you everything..
http://forum.xda-developers.com/sho..., custom roms installing, going back to stock
And there is a thanks button hit it if you want to give thanks
Sent from my HTC Desire X using xda app-developers app
Volume down while powering on, there will be a bunch of information about your phone. Write down all line for line
Sent from my Nexus 7 using XDA Premium 4 mobile app
Thanks for all your help.
I've flashed boot.img from fastboot command. It worked..To be frank, I dont know how it worked..but it worked :laugh:

CMD wont Change to \Android

I just purchased the Sprint variant of the HTC One Max and decided to unlock the bootloader to root it. I followed the instructions up to the point where I have to have to run the fastboot command in CMD. The example shows the CMD changing its directory to \Android. When I try to do this, I'm given the error: "The system cannot find the path specified." I tried just doing fastboot command, but came back with "fastboot is not recognized..."
Any help with this would be greatly appreciated.
P.S. Android SDK, Java Runtime, and HTC Sync are all installed and updated.
Thanks in advance!
bb2si said:
I just purchased the Sprint variant of the HTC One Max and decided to unlock the bootloader to root it. I followed the instructions up to the point where I have to have to run the fastboot command in CMD. The example shows the CMD changing its directory to \Android. When I try to do this, I'm given the error: "The system cannot find the path specified." I tried just doing fastboot command, but came back with "fastboot is not recognized..."
Any help with this would be greatly appreciated.
P.S. Android SDK, Java Runtime, and HTC Sync are all installed and updated.
Thanks in advance!
Click to expand...
Click to collapse
You need to run cmd prompt as admin and CD to wherever the platform tools folder is installed (part of the sdk)...
Sent from my Nexus 7 using Tapatalk
dottat said:
You need to run cmd prompt as admin and CD to wherever the platform tools folder is installed (part of the sdk)...
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thank you for the quick reply.
This worked, but when I attempt to run the command for the fastboot I get an error saying "The program can't start because AdbWinApi.dll is missing from your computer."
Was this something that was supposed to be installed from one of the Android SDK installs?
bb2si said:
Thank you for the quick reply.
This worked, but when I attempt to run the command for the fastboot I get an error saying "The program can't start because AdbWinApi.dll is missing from your computer."
Was this something that was supposed to be installed from one of the Android SDK installs?
Click to expand...
Click to collapse
Sounds like part of it didn't install correctly. Rinse and repeat. Maybe something got hosed in your earlier attempts.
Sent from my HTC6600LVW using Tapatalk
dottat said:
Sounds like part of it didn't install correctly. Rinse and repeat. Maybe something got hosed in your earlier attempts.
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
I happened to have found the file in a different folder. Should I just drag and drop it into the adt folder?
bb2si said:
I happened to have found the file in a different folder. Should I just drag and drop it into the adt folder?
Click to expand...
Click to collapse
Which folder and what else was in it ?
Sent from my HTC6600LVW using Tapatalk
dottat said:
Which folder and what else was in it ?
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
It was in the sdk\platform-tools folder.
Does the command line have to be directed to the folder containing the fastboot application file? Inside said platform-tools folder is the fastboot file as well as the ApbWinApi.dll file.
OH! I think I got it! I'll report back with final details...
Keep your fingers crossed!!!
bb2si said:
OH! I think I got it! I'll report back with final details...
Keep your fingers crossed!!!
Click to expand...
Click to collapse
Lol....didn't I say platform tools the first time ? Good luck man...
Btw if you get it working you just learned one of the most important prerequisites for android modding.
Sent from my HTC6600LVW using Tapatalk
dottat said:
Lol....didn't I say platform tools the first time ? Good luck man...
Btw if you get it working you just learned one of the most important prerequisites for android modding.
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
Yep! Unlocked the bootloader successfully! Now, I'm trying to Root and the instructions I'm following are good, but I'm stuck again - It says to run CMD and use the command "adb devices." It comes back with nothing found, yet, according to the instructions my phone's serial number should be listed. I placed the Superuser.zip file in the phone's storage (per requisite) and tried to run the command with the phone on normally and again in the bootloader.
No luck... Suggestions?
Edit: USB Debugging wasn't on... Trying again...
bb2si said:
Yep! Unlocked the bootloader successfully! Now, I'm trying to Root and the instructions I'm following are good, but I'm stuck again - It says to run CMD and use the command "adb devices." It comes back with nothing found, yet, according to the instructions my phone's serial number should be listed. I placed the Superuser.zip file in the phone's storage (per requisite) and tried to run the command with the phone on normally and again in the bootloader.
No luck... Suggestions?
Edit: USB Debugging wasn't on... Trying again...
Click to expand...
Click to collapse
If you are unlocked you can simply download a custom recovery for your phone into your fastboot directory and boot your phone to boot loader (fastboot) mode. Flash your recovery using your appropriate fastboot command. Then boot to your new custom recovery and flash the su.zip you copied to the phone from recovery.
Sent from my Nexus 7 using Tapatalk
dottat said:
If you are unlocked you can simply download a custom recovery for your phone into your fastboot directory and boot your phone to boot loader (fastboot) mode. Flash your recovery using your appropriate fastboot command. Then boot to your new custom recovery and flash the su.zip you copied to the phone from recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Everything went smoothly! I am now rooted and excited to get to work!
Thank you for your time and help!
bb2si said:
Everything went smoothly! I am now rooted and excited to get to work!
Thank you for your time and help!
Click to expand...
Click to collapse
Good deal. You may want to investigate s-off'ing that thing too while you still can. Just make sure you download the right version for your phone and run as admin
http://forum.xda-developers.com/showthread.php?t=2525375
Sent from my Nexus 7 using Tapatalk
dottat said:
Good deal. You may want to investigate s-off'ing that thing too while you still can. Just make sure you download the right version for your phone and run as admin
http://forum.xda-developers.com/showthread.php?t=2525375
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Would that solve my next problem? (I'm such a sputz)
I'm rooted, but I can't uninstall anything with Titanium Backup. The last time this happened on my S3 I was told to install SuperSU and install updated binaries. I did that, but when I reboot and go back into SuoerSU it acymts as if it never happened. Apps I uninstalled are still present, too.
Would S-offing solve this?
Edit: Also, I get an annoying pop-up when I start the phone up that says vDN client has failed. Even before I unlocked and rooted. Any way to stop this?
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
bb2si said:
Would that solve my next problem? (I'm such a sputz)
I'm rooted, but I can't uninstall anything with Titanium Backup. The last time this happened on my S3 I was told to install SuperSU and install updated binaries. I did that, but when I reboot and go back into SuoerSU it acymts as if it never happened. Apps I uninstalled are still present, too.
Would S-offing solve this?
Edit: Also, I get an annoying pop-up when I start the phone up that says vDN client has failed. Even before I unlocked and rooted. Any way to stop this?
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to flash an insecure boot.img to disable system write protection. S-off would allow you to recover your phone using both signed and unsigned ruu. The advantage of that is when you hose your phone and there's not a current ruu for the version your phone is on - s-on user would be screwed because you cannot downgrade. Just one of many reasons.
The fc problem I'm not sure. If you aren't using that app you can disable it in the stock app manager. Same goes for stuff you might normally remove with tibu. Be warned too that future otas will likely fail if system apps are missing.
Sent from my HTC6600LVW using Tapatalk
bb2si said:
Would that solve my next problem? (I'm such a sputz)
I'm rooted, but I can't uninstall anything with Titanium Backup. The last time this happened on my S3 I was told to install SuperSU and install updated binaries. I did that, but when I reboot and go back into SuoerSU it acymts as if it never happened. Apps I uninstalled are still present, too.
Would S-offing solve this?
Edit: Also, I get an annoying pop-up when I start the phone up that says vDN client has failed. Even before I unlocked and rooted. Any way to stop this?
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i have noticed someelse posting about the vDN client failing.. it your providers bloatware if i remember correctly and i think @dottat has a good suggestion! disabled it
So I somehow lost root privileges... After S-offing, I was asked to update the SU binary through the Superuser app (not SuperSU) and I did so. When the install finished, I went into Titanium Backup and was told I'm not rooted.
Went back into Superuser and it didn't prompt for an update, but SuperSU did. Attempted and failed.
Went into recovery and tried to recover root - no luck.
HALP!
bb2si said:
So I somehow lost root privileges... After S-offing, I was asked to update the SU binary through the Superuser app (not SuperSU) and I did so. When the install finished, I went into Titanium Backup and was told I'm not rooted.
Went back into Superuser and it didn't prompt for an update, but SuperSU did. Attempted and failed.
Went into recovery and tried to recover root - no luck.
HALP!
Click to expand...
Click to collapse
Easy...Download this and flash in recovery
http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
Make sure you aren't running both supersu and superuser. I prefer supersu
Sent from my Nexus 7 using Tapatalk
Huzzah! Thanks again! Hopefully I can actually freeze/remove system apps without them being brought back after a reboot. Also, in the picture provided, what is that icon in the notification bar just right of the GPS icon? And, is there any way to hide some of the icons?
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
Don't use Superuser by ChainsDD anymore.. Personally I would love to continue to use it but he is basically no longer supporting his Superuser app and binary and hasn't updated it in a very long time. SuperSU by Chainfire is constantly being updated therefore made to work with all current versions of Android.. Quite frankly it's all the same basically anyways I just liked the skull and cross bone look lol... Chainfire is a monster as well and has a ton of root related apps and cool things going on. ChainsDD I guess passed the torch on to Chainfire???
bb2si said:
Huzzah! Thanks again! Hopefully I can actually freeze/remove system apps without them being brought back after a reboot. Also, in the picture provided, what is that icon in the notification bar just right of the GPS icon? And, is there any way to hide some of the icons?
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
---------- Post added at 07:54 PM ---------- Previous post was at 07:53 PM ----------
Also I have no idea what that icon is next to the GPS icon.. You must be on Sprint, I'm on Verizon and I don't think I've seen that icon before..

Categories

Resources