hi everyone. firstly, excuseme me for my bad english.
ı installed epinter rom cm 10.2 android 4.2.2 but don't work wifi and bluetooth. Do you have a stable ROM that you can advise me?
Hello,
quite stable is cm 7.2 or most stable original firmware but don't install google services because phone will lag.
lokr said:
Hello,
quite stable is cm 7.2 or most stable original firmware but don't install google services because phone will lag.
Click to expand...
Click to collapse
thank you very much. I will try it
ROM Motorola Atrix
Optimus White said:
hi everyone. firstly, excuseme me for my bad english.
ı installed epinter rom cm 10.2 android 4.2.2 but don't work wifi and bluetooth. Do you have a stable ROM that you can advise me?
Click to expand...
Click to collapse
Hi,
here is another one, based on the epinter-source 10.1, working for me. I installed it 10 days ago, using it daily.
http://forum.xda-developers.com/showthread.php?t=2292347
Especially WiFi and Bluetooth are working.
What does not work is Speech-to-text for most apps while Google Voice is working.
On my MB860 I reach about two days while "light" usage between charging.
Hope this helps,
BR
Oliver
oli.r said:
Hi,
here is another one, based on the epinter-source 10.1, working for me. I installed it 10 days ago, using it daily.
http://forum.xda-developers.com/showthread.php?t=2292347
Especially WiFi and Bluetooth are working.
What does not work is Speech-to-text for most apps while Google Voice is working.
On my MB860 I reach about two days while "light" usage between charging.
Hope this helps,
BR
Oliver
Click to expand...
Click to collapse
thank you very much oli.r
I am downloading now, I'll try at tonight or tomorrow. did you install rom of the first post?
also, does it display vibrrate?
Optimus White said:
thank you very much oli.r
I am downloading now, I'll try at tonight or tomorrow. did you install rom of the first post?
also, does it display vibrrate?
Click to expand...
Click to collapse
I ended up with a file called:
SmarT LighT RoM v1.2.3 ______ 1.zip
and
GApps 4.2.2 Minimal.zip (GoogleApps)
Do a factory reset before flashing and reboot between flashing the ROM and the apps.
Good luck!
Oliver
Optimus White said:
also, does it display vibrrate?
Click to expand...
Click to collapse
Forgot about that...Yes, it does...
oli.r said:
Forgot about that...Yes, it does...
Click to expand...
Click to collapse
I installed kernel-cm10.1-20131108_0246-epinter-olympus-hporch32 and vibrate problem was resolved. but I do not know what is the battery performance of this kernel than the other. also, camera perpormance is not good, flash don't work
oli.r said:
Forgot about that...Yes, it does...
Click to expand...
Click to collapse
I want try kernel-2014_03_27_16_06_cm10_1.zip but I can not find download link. can you help me?
Optimus White said:
I want try kernel-2014_03_27_16_06_cm10_1.zip but I can not find download link. can you help me?
Click to expand...
Click to collapse
No idea, sorry, didn't changed that.
Related
Dear friends,
I just install Cyanogenmod 7.2 RC0 (built 2/10/12) on my HTC Aria.
After this I have some problems:
1. Home and Search Buttons doesn't work;
2. Screenlock doesn't work ( I tried pattern lock configuration).
Have you any experience?
Need your help.
Best regards,
Mamuka
gijua_rx7 said:
Dear friends,
I just install Cyanogenmod 7.2 RC0 (built 2/10/12) on my HTC Aria.
After this I have some problems:
1. Home and Search Buttons doesn't work;
2. Screenlock doesn't work ( I tried pattern lock configuration).
Have you any experience?
Need your help.
Best regards,
Mamuka
Click to expand...
Click to collapse
Try doing a clean install.
What do you mean in "clean install"?
Is it better to install "Nightly" then "RC"?
Please, give me a download link for CM 7.2 fully working version without any bugs.
gijua_rx7 said:
What do you mean in "clean install"?
Is it better to install "Nightly" then "RC"?
Please, give me a download link for CM 7.2 fully working version without any bugs.
Click to expand...
Click to collapse
It means to wipe everything before flashing. Try the one in this post: http://forum.xda-developers.com/showpost.php?p=24340035&postcount=250. Nightlies are more updated than RCs.
Theonew said:
It means to wipe everything before flashing. Try the one in this post: http://forum.xda-developers.com/showpost.php?p=24340035&postcount=250. Nightlies are more updated than RCs.
Click to expand...
Click to collapse
but the nightlies are more buggy than the rc's, the rc's are more buggy than the stable. The stable versions are just what the name says, IMO The stable versions are the best if you dont want to deal with bugs. If you are like me and dont mind them then go with nightlies or the RC's. Personally I am using the RC from the cyanogenmod site.
benbailey84 said:
but the nightlies are more buggy than the rc's, the rc's are more buggy than the stable. The stable versions are just what the name says, IMO The stable versions are the best if you dont want to deal with bugs. If you are like me and dont mind them then go with nightlies or the RC's. Personally I am using the RC from the cyanogenmod site.
Click to expand...
Click to collapse
The one I linked to has no noticeable bugs. Also, if something is a nightly, it doesn't mean that it needs to have bugs. Usually just the earlier nightlies have bugs.
Theonew said:
It means to wipe everything before flashing. Try the one in this post: http://forum.xda-developers.com/showpost.php?p=24340035&postcount=250. Nightlies are more updated than RCs.
Click to expand...
Click to collapse
Thank you very much. This version works without problems.
Problem's with twitter
Sorry me for my bad english.
I was installed CuanogenMod 7.2.0-RC1 and after that twitter hasn't working. How I
make to work that?
Thanks you.
Dn4g said:
Sorry me for my bad english.
I was installed CuanogenMod 7.2.0-RC1 and after that twitter hasn't working. How I
make to work that?
Thanks you.
Click to expand...
Click to collapse
only install gapp.
bigboss555 said:
only install gapp.
Click to expand...
Click to collapse
could you tell me a titles of this gapp. Where I can get it? Google Play?
Dn4g said:
could you tell me a titles of this gapp. Where I can get it? Google Play?
Click to expand...
Click to collapse
Gapps are available here: http://goo.im/gapps/gapps-gb-20110828-signed.zip.
Theonew said:
Gapps are available here
Click to expand...
Click to collapse
I have installed gapps, but Twitter doesnt want to work anyway.
Hi, everybody, i'm a member of Tinh Tế Forum, i flashed MIUI rom 2.4.27 ported by HDJACk, everything is ok but 3G not work, and he still has not found way to fix this problem, please help
This rom MIUI 2.4.27 (android 2.3.7): http://www.mediafire.com/?ea8e2ad9nz1n0wy
I'll flash it over the weekend and see what I can figure out. Can the phone make voice calls at all?
michaeljwestii said:
I'll flash it over the weekend and see what I can figure out. Can the phone make voice calls at all?
Click to expand...
Click to collapse
Is 3G working for CM7.2 GB 2.3.7 ?
prasad12ka4 said:
Is 3G working for CM7.2 GB 2.3.7 ?
Click to expand...
Click to collapse
This thread is talking about the ICS build, not GB. And 3G does work on mine running CM 7.2.
michaeljwestii said:
This thread is talking about the ICS build, not GB. And 3G does work on mine running CM 7.2.
Click to expand...
Click to collapse
thanks that's all i wanted to know
michaeljwestii said:
I'll flash it over the weekend and see what I can figure out. Can the phone make voice calls at all?
Click to expand...
Click to collapse
voice call is good, but 3G not work, i tried to creat the APN, but can't save it
This ROM is so close to being ready for primetime! Everything seems to work except for 3G. No lag at all, very smooth. I can't wait to see what the guys come up with. I still prefer a CM based ROM though, I'm not a fan of MIUI's graphics.
michaeljwestii said:
This ROM is so close to being ready for primetime! Everything seems to work except for 3G. No lag at all, very smooth. I can't wait to see what the guys come up with. I still prefer a CM based ROM though, I'm not a fan of MIUI's graphics.
Click to expand...
Click to collapse
HDjack is going to release CM9 rom soon, please visit: http://www.tinhte.vn/threads/899475/
changkho1908 said:
HDjack is going to release CM9 rom soon, please visit: http://www.tinhte.vn/threads/899475/
Click to expand...
Click to collapse
thank you friend that was exactly what i was waiting for..
this miui version based on gingerbread 2.3.7?
where is the ics then?
Also headset doesn't work in this new MIUI ROM.
Using this rom, I modify from original rom and you can switch 2G/3G without FC
https://drive.google.com/folderview?id=0B9hsvqns6CCbNGFPeFZPcXVTRG8&usp=sharing
nightstorm8x said:
Using this rom, I modify from original rom and you can switch 2G/3G without FC
https://drive.google.com/folderview?id=0B9hsvqns6CCbNGFPeFZPcXVTRG8&usp=sharing
Click to expand...
Click to collapse
The ROM download link doesn't work.
streak4m3 said:
The ROM download link doesn't work.
Click to expand...
Click to collapse
Link work as it
Thanks, was able to download.
Sent from my Nexus 5 using Tapatalk
how about camera? fix or still fc?
WELL I been on these forums since 4.1 i been able to get my self around but i have now the e970 running on 4.4.2 the wifi is not working im on nightly 12.26.13 but the one prior to this is working on wifi but crashes i installed slimkat 4.4.2 gapps but i'm not sure if i'm doing this right everything works but wifi n gps what i'm really looking for is a rom for this phone that has gps and wifi working aka REALLY STABLE please help im going nuts
general732 said:
WELL I been on these forums since 4.1 i been able to get my self around but i have now the e970 running on 4.4.2 the wifi is not working im on nightly 12.26.13 but the one prior to this is working on wifi but crashes i installed slimkat 4.4.2 gapps but i'm not sure if i'm doing this right everything works but wifi n gps what i'm really looking for is a rom for this phone that has gps and wifi working aka REALLY STABLE please help im going nuts
Click to expand...
Click to collapse
Anytime you use a nightly, it will almost always have a bug, that is why developers don't require feedback for them nor support them because they will simply have bugs, always.
Sent from an Xposed LG-G2/LS-980
Critical Detox said:
Anytime you use a nightly, it will almost always have a bug, that is why developers don't require feedback for them nor support them because they will simply have bugs, always.
Sent from an Xposed LG-G2/LS-980
Click to expand...
Click to collapse
then what do i do can anybody help me get a stable rom even if its 4.1 for e970 i jus want a stable oos already
general732 said:
then what do i do can anybody help me get a stable rom even if its 4.1 for e970 i jus want a stable oos already
Click to expand...
Click to collapse
Have you looked at these yet?
http://forum.xda-developers.com/showthread.php?p=48086905
There's two roms on that thread by the way so if you choose to use one make sure you're downloading for that specific rom.
Sent from an Xposed LG-G2/LS-980
Critical Detox said:
Have you looked at these yet?
http://forum.xda-developers.com/showthread.php?p=48086905
There's two roms on that thread by the way so if you choose to use one make sure you're downloading for that specific rom.
Sent from an Xposed LG-G2/LS-980
Click to expand...
Click to collapse
How do I go about choosing which ROM to download n how do I know how to compare them? The only thing I been doing is downloading ROMs n which ever worked I kept but for example one rom I had everything worked WiFi gps but multimedia messaging didn't work n it would restart by itself. What I origanlly wanted was the 4.1 because att didn't offer that no more for update so the origanl ROM was horrible it was 4.0 n was super slow any input would be greatly appreciated on how to help my confusion thank you
general732 said:
How do I go about choosing which ROM to download n how do I know how to compare them? The only thing I been doing is downloading ROMs n which ever worked I kept but for example one rom I had everything worked WiFi gps but multimedia messaging didn't work n it would restart by itself. What I origanlly wanted was the 4.1 because att didn't offer that no more for update so the origanl ROM was horrible it was 4.0 n was super slow any input would be greatly appreciated on how to help my confusion thank you
Click to expand...
Click to collapse
that rom link isnt for the E970
general732 said:
that rom link isnt for the E970
Click to expand...
Click to collapse
when i try to install it said this is for geeb only not e970 dont know now lol
general732 said:
when i try to install it said this is for geeb only not e970 dont know now lol
Click to expand...
Click to collapse
Are you familiar with IRC? If so, I can point you to a channel that has some people that can help you out with this more directly.
Critical Detox said:
Are you familiar with IRC? If so, I can point you to a channel that has some people that can help you out with this more directly.
Click to expand...
Click to collapse
i havent used it in years ill install it
I just installed it what channel
general732 said:
I just installed it what channel
Click to expand...
Click to collapse
#lg-optimus-g
Sent from an Xposed LG-G2/LS-980
Hi. I was wondering if it was possible to pair my watch via Bluetooth with the phone. Because it isn't officially supported although there is a thread which has an app that can let any 4.3 and above device connect to the watches and use their functions. I am running ViMiRo ROM at the moment. Please help. I am new to this.
Sadly, all our availible roms are below android 4.3.
G Shock+
Twisthor said:
Sadly, all our availible roms are below android 4.3.
Click to expand...
Click to collapse
So I'll just have to wait till the cm 11 rom is stable to some extent. Thanks for the reply. They guys over at the forum are making great progress.
Vineet Upadhyaya said:
Hi. I was wondering if it was possible to pair my watch via Bluetooth with the phone. Because it isn't officially supported although there is a thread which has an app that can let any 4.3 and above device connect to the watches and use their functions. I am running ViMiRo ROM at the moment. Please help. I am new to this.
Click to expand...
Click to collapse
Can you please direct me to that thread as im having issues connecting my g shock gb x6900b to my htc m7 running on venom.
Vineet Upadhyaya said:
Hi. I was wondering if it was possible to pair my watch via Bluetooth with the phone. Because it isn't officially supported although there is a thread which has an app that can let any 4.3 and above device connect to the watches and use their functions. I am running ViMiRo ROM at the moment. Please help. I am new to this.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B2xUDHdk_M6HckI3c2RTLXVnekk/edit?pli=1
Link for CM10.1 (Android 4.3) ROM almost fully working.
Delta-flasher said:
https://docs.google.com/file/d/0B2xUDHdk_M6HckI3c2RTLXVnekk/edit?pli=1
Link for CM10.1 (Android 4.3) ROM almost fully working.
Click to expand...
Click to collapse
This was posted when 4.3 didn't exist. I've been using it for quite a while now but my watch still doesn't work. It says bluetooth low energy not supported.
tahasaeed said:
Can you please direct me to that thread as im having issues connecting my g shock gb x6900b to my htc m7 running on venom.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2734345
Vineet Upadhyaya said:
http://forum.xda-developers.com/showthread.php?t=2734345
Click to expand...
Click to collapse
Thankhyou vineet, I got it working without that. Installed the latest version of the g shock app. Then i deleted my previous iphone profile from my g shock. After that the app connects to the hpone without any hassle. All functions working.
tahasaeed said:
Thankhyou vineet, I got it working without that. Installed the latest version of the g shock app. Then i deleted my previous iphone profile from my g shock. After that the app connects to the hpone without any hassle. All functions working.
Click to expand...
Click to collapse
I still can't get it to work
Vineet Upadhyaya said:
I still can't get it to work
Click to expand...
Click to collapse
On desire x? Which rom are you on. Which version of android?
You'll have to use CM 10.2 which is Android 4.3. CM 10.1 is Android 4.2 (and won't work...)
dansou901 said:
You'll have to use CM 10.2 which is Android 4.3. CM 10.1 is Android 4.2 (and won't work...)
Click to expand...
Click to collapse
I am using cm 10.2 and it doesn't work! Please help.
Vineet Upadhyaya said:
I am using cm 10.2 and it doesn't work! Please help.
Click to expand...
Click to collapse
I neither have the phone nor the watch, so I can't help... sorry. You have to ask someone else then. You can install the app on the phone? Does bluetooth work properly?
dansou901 said:
I neither have the phone nor the watch, so I can't help... sorry. You have to ask someone else then. You can install the app on the phone? Does bluetooth work properly?
Click to expand...
Click to collapse
Yes I can install the app and bluetooth works fine. I've used it for file sharing.
Hello guys, I am new and I don't know much info about phones etc. I own an LG L7 P710 and i have 4.1.2 android version but it lags so much even I have unistall "huge" apps and I have dones factory resets. So I would like to find a custom rom! But I don't know anything about these things So I would like to tell me what's the best rom for P710 is right now. If I have to post any further info of my info tell me! Sorry for my english and thanks for your time!
Cheers,
pronoobgr
If you want a Jellybean based Custom Rom, you could try Cyanogenmod 10.2 by neutrondev, its the most stable rom of all at the moment.
If you want a KitKat based Custom Rom, you could try Cyanogemod 11 or Mokee OS, but these are rather laggy due to missing gpu drivers and at the newest version of Cyanogenmod 11 the LED doesn't work.
As I said, Cyanogenmod 10.2 is the most stable so you should try this one first.
TheBesterTester said:
If you want a Jellybean based Custom Rom, you could try Cyanogenmod 10.2 by neutrondev, its the most stable rom of all at the moment.
If you want a KitKat based Custom Rom, you could try Cyanogemod 11 or Mokee OS, but these are rather laggy due to missing gpu drivers and at the newest version of Cyanogenmod 11 the LED doesn't work.
As I said, Cyanogenmod 10.2 is the most stable so you should try this one first.
Click to expand...
Click to collapse
with this kernel that skyinfo created cm11 led works and there is huge improvement in overall perfomance..
http://www.mediafire.com/download/ywqkf96d2q4rt9v/kenrel_test2-p710.zip
cm 10.2 is great but it has problems with battery draining till now.lets hope the neutrondev will fix it.
manosper said:
with this kernel that skyinfo created cm11 led works and there is huge improvement in overall perfomance..
http://www.mediafire.com/download/ywqkf96d2q4rt9v/kenrel_test2-p710.zip
cm 10.2 is great but it has problems with battery draining till now.lets hope the neutrondev will fix it.
Click to expand...
Click to collapse
Not skyinfo fixed the led. I did.
neutrondev said:
Not skyinfo fixed the led. I did.
Click to expand...
Click to collapse
sorry if i made mistake and thank you for fixing it.but i saw that kernel was posted by skyinfo and i supposed it was his work.
manosper said:
sorry if i made mistake and thank you for fixing it.but i saw that kernel was posted by skyinfo and i supposed it was his work.
Click to expand...
Click to collapse
Well skyinfo made the work for my cm10.2 and it is based on my cm10.2 kernel. . He just made the improvements in speed ^.^. Led is my work. No problem. BTW cm10.2 is miles smoother than cm11.
neutrondev said:
Well skyinfo made the work for my cm10.2 and it is based on my cm10.2 kernel. . He just made the improvements in speed ^.^. Led is my work. No problem. BTW cm10.2 is miles smoother than cm11.
Click to expand...
Click to collapse
yes cm 10.2 is miles faster and without lags but the battery draining is unfortunately annoying,but i have faith that you will be able to fix it eventually.....
manosper said:
yes cm 10.2 is miles faster and without lags but the battery draining is unfortunately annoying,but i have faith that you will be able to fix it eventually.....
Click to expand...
Click to collapse
Well performance costs battery the other portion is drained by wi-fi. Cm11 has also poor battery btw.
I am using cm 10.2 and until now, everything works perfectly! Thank you guys Keep that work!
pronoobgr said:
I am using cm 10.2 and until now, everything works perfectly! Thank you guys Keep that work!
Click to expand...
Click to collapse
Well ^.^ nice. I will continue to work on that I am the dev for cm10.2. There is some things left to do. Dev is not stopped yet.
neutrondev said:
Well ^.^ nice. I will continue to work on that I am the dev for cm10.2. There is some things left to do. Dev is not stopped yet.
Click to expand...
Click to collapse
Im glad to hear that Btw, is any way to install aps from playstore? ;p or no?
Or is any link with specific apps for cm 10.2 ??
Sorry for silly questions, I am newbie
pronoobgr said:
Im glad to hear that Btw, is any way to install aps from playstore? ;p or no?
Or is any link with specific apps for cm 10.2 ??
Sorry for silly questions, I am newbie
Click to expand...
Click to collapse
Tomorrow there will be another release. I made a mistake and gapps are crashing. Tomorrow uploading new version with some fixes and Gapps ^.^.
neutrondev said:
Tomorrow there will be another release. I made a mistake and gapps are crashing. Tomorrow uploading new version with some fixes and Gapps ^.^.
Click to expand...
Click to collapse
Ok then
purified stock 4.4.2