Instruction:
1. Go to TWRP
2. Wipe > Advance Wipe > Dalvik / ART Cache & System & Cache & Data (For fresh Install, ignore if updating from any previous MIUI rom to keep ur data)
3. Install Zip package
4. Clear Dalvik Cache (If updating from any previous MIUI rom)
5. After start keep airplane mode on by presing power key & salect aeroplane mode on ( this need to be done only while startup wizard, after complete start wizard you can off aeroplane mode)
6. Enable "Documents" app by going Setting > Install apps > go to end of apps there is "Documents" app & enable it.
For NVRAM Error:
Download NVRAM File & replace the both file Wifi & Wifi custom to Root or (/Device) > data > nvram > APCFG > APRDEB
& reboot.
IF INTERNET SPEED IS LOW:
Download K3 Note Modem Patch.zip & flash via TWRP. After flashing reboot.
IF FACING APP SLEEP IN BACKGROUND OR NOT AUTOSTART THEN PLEASE FOLLOW BELOW INSTRUCTION:
1. Go to Security app > Permissions > Autostart > Enable the perticular app which you want to be autostart.
2. Go to Security app > Battery > App battery saver > (click on pertucular app which u don't him to be sleep & keep running in background) > choose "No restrictions"
Changelog in 6.7.14
Very smooth comparing with 6.7.12
Fixed heating problem which was in 6.7.12 while playing game
Battery improved alot & not heating even playing clash of clan with connected charger….. Very surprising!!!
DOWNLOAD MIUI8
Is the ROM is stable one?
We already know there are many MIUI custom ROMS available for Lenovo k3 note but none of them is stable.:crying:
Related
Before install the rom,make sure you backup all your data!
(Warning:do it at your own risk!!! I am not responsible for any damage to your phone!!!)
First of all,credit goes to:
-@hungvip2001
-@CarlosGallego98
-Team 4PDA.ru (Go to official topic page of sm-g318h)
What work?
-Everything
Bugs?
-3G network connection sometimes drop when turning on mobile data.
(Fix in the patch give below)
-No apps to make FM Radio working. (It too mainstream )
-Offline Charging (No charging animation when the phone turn off but it still do charge )
Requirement:
-TWRP (How to get it ? Here:https://forum.xda-developers.com/an...rp-root-sm-t3331182/post65712911#post65712911)
-SD Card (atleast 1gb )
-All requirement file for the installation.
Requirement Files:
-The Rom
-GApps
(Guide to download GApps)
Choose
Platform : ARM
Android : 4.4
Variant: Nano or Pico
-3G Network Patch Fix (download link at the end of the post)
OK lets begin the installation :
(Warning:do it at your own risk!!! I am not responsible for any damage to your phone!!!)
1. Download all file requirement.
2. After that put the rom and the gapps in your external sdcard.
3. Boot in to Recovery mode (Press Power button + Home button + Volume Up at the same time)
4.Warning: This will erase all your data in internal storage!!! Make sure you backup all your data!!!!!
Go to Wipe ---> Advanced Wipe ---> Select :
-Cache
-Internal Storage
-Data
-System
Then Slide to Wipe all of it.
5. After that go to home and select Install :
-Select (Up a Level) then select external_sd.
-After that find where you put the rom and the gapps.
6. First select the rom and install it.
7. Wait for it done then go back and select the gapps.
8. After finish that select Wipe Dalvik Cache.
9. Then Reboot.
10. Enjoy
Bug fixes:
-3G Network Connection Drop
Extract renotify.zip and paste it in to \system\bin
Replace it if it ask.
Press the thanks button if it work for you
Source Rom from hungvip2001 post: https://forum.xda-developers.com/ace-4/development/rom-cyanogenmod-11-12-13-ace-4-neo-ace-t3627637
Source screenshot from 4pda.ru: http://4pda.ru/forum/index.php?showtopic=677369&st=1820#entry56365110
Mtp not bug?
ardimaul17 said:
Mtp not bug?
Click to expand...
Click to collapse
No, MTP and ART runtime are buggy.
Thanks, it's working for me
Is it lag free?
Hey There ...........
Introducing My New Rom : S9 Experience Custom Build
Built V3
Based On Letest Stock 5.1.1 Lollipop Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HXXU0AQK2/J200HODD0AQK2 firmware
4. Medium Deboalted
5. Zipaligned
6. Signed
7. Avroid latest keyboard
8. Smart browser
9. White Style Statusbar
10. S9 Music Player
11. Internet speed monitor
12. Free Fonts 50 + Pack
13. All Apps Are Updated
14. Google Camera lens Blur
15. Sony Movies Added
16. S8 Wallpaper
17. Dux Icon Pack automatic setup
18. S8 Sound And Bootanimation
19. S8 Notes
20. Latest Samsung internet browser
21. Latest version SHAREit no need update
22. Easy Mode Enabler For Settings
22. Youtube Ad Away
23. And More ...
:How To Install:
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device (See Here : https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. Copy the S9 Experience Custom Build.zip to Your SD card
4. Turn off Your Phone And press power+home button+Volume up button at a same time
5. After appearing TWRP recovery go to Wipe>Advanced Wipe Then Select Data, Dalvik / Art cache ,System , Cache And Then Wipe To wipe
6. Then Go To > Install and install S9 Experience Custom Build.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 15 minutes. ( NB : If It Takes Longer Than 15 Min To BootInto Android, Then Remove The Battery And Power On The Device Again )
8. Now you are good to use this rom ......
[For Xposed Install : xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip after installing rom given in the attachments]
Downloads : Thanks for watching our Video | Like | Share | Subscribe |
In this video i have shown How to Install Samsung Galaxy S9 Rom On Galaxy J2 For
SM-J200H Only !!! Rom Link
https://drive.google.com/file/d/1Wu0mLp1MTtgVB3x2txsbIl_UNpOe-Q4u/view?usp=drivesdk
Heyy whats up guys
Welcome To the new thread on xda..
This is the new custom rom for j23g(j200h)
Warnings:-
1. You will now void your Warrenty
2. Backup all your personal apps and important data to avoid loosing them
3. Do all steps perfectly and carefully as mentioned below
4. I am not responsible for any mistake that you perform and brick your phone:crying:
Features:-
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0AQF1/AQG1 firmware
4. Medium Deboalted
5. Zipaligned
6. Signed
7. PreRooted(Systemless)
8. Added Busybox,SU.d and Init.d Support
9. Marshmallow Style Statusbar
10.All Apps Are Updated
11.Sony Movies Added
12.S8 Wallpaper
13.Icon Themer
14.S8 Sound And Note 7 Bootanimation
15.Easy Mode Enabler For Settings
16.Stock Based Camera
17.ios12 Emojis
18.300+ Fonts
19.New Ringtones
20.Latest Security Patch Of Nov.2018
Installation Process:-
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device
3. Copy the zip to Your SD card/Internal Storage
4. Turn off Your Phone And press power+home button+Volume up button at a same time
5. After appearing TWRP recovery go to Wipe>Advanced Wipe Then Select Data, Dalvik / Art cache ,System , Cache And Then Wipe To wipe
6. Then Go To > Install and install zip file downloaded before
7. Now reboot system and wait for approximately 15 minutes. ( NB : If It Takes Longer Than 15 Min To Boot Into Android, Then Remove The Battery And Power On The Device Again )
8. Then, do setup and enjoy the rom
Download Link:-
https://mega.nz/#!7ap1EIJT!HtFQm7hFGAPKXmDdVKc_QeyJ1PlGZPV1uO4yoy-zp20
Youtube Video:-
https://youtu.be/haYrSngzj64
Credits:-
@AssayYED – for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me:-
https://instagram.com/bishal_katel
Heyy whats up guys
Welcome To the new thread on xda..
This is the deodexed rom for j23g(j200h)
Warnings:-
1. You will now void your Warrenty
2. Backup all your personal apps and important data to avoid loosing them
3. Do all steps perfectly and carefully as mentioned below
4. I am not responsible for any mistake that you perform and brick your phone:crying:
Features:-
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0AQF1/AQG1 firmware
4. Medium Deboalted
5. Zipaligned
6. Signed
7. 15+ Themes
8. Added Busybox,SU.d and Init.d Support
9. Marshmallow Style Statusbar
10.All Apps Are Updated
11.SMusic Added
12.S8 Wallpaper
13.Icon Themer
14.S8 Sound And Note 7 Bootanimation
15.Easy Mode Enabler For Settings
16.Stock Based Camera
17.ios12 Emojis
18.300+ Fonts
19.New Ringtones
20.Latest Security Patch Of Nov.2018
21.Email App Added
22.Google Camera Added
23.Many More.......
Installation Process:-
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device
3. Copy the zip to Your SD card/Internal Storage
4. Turn off Your Phone And press power+home button+Volume up button at a same time
5. After appearing TWRP recovery go to Wipe>Advanced Wipe Then Select Data, Dalvik / Art cache ,System , Cache And Then Wipe To wipe
6. Then Go To > Install and install zip file downloaded before
7. Now reboot system and wait for approximately 15 minutes. ( NB : If It Takes Longer Than 15 Min To Boot Into Android, Then Remove The Battery And Power On The Device Again )
8. Then, do setup and enjoy the rom
Download Link:-
https://mega.nz/#!Pe4EVArC!7P5kTEd6UymSSxKoLyB5amVtL4k0yxIUlz3_y-dBy2Q
B]Credits:-[/B]
@AssayYED – for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me:-
https://instagram.com/bishal_katel
Unlocked the bootloader and got many problems getting to a nicely working android 11. Here it is, flash in this exact order:
surya_global_images_V12.0.3.0.QJGMIXM_20200925.0000.00_10.0_global_0942ba3b7a > OrangeFox-R11.0_4_Alpha-Unofficial-surya.img > Nitrogen-OS-11-surya-20201018.zip > BiTGApps-arm64-11.0.0-R17_signed (remember before installation to download and copy cts-config.prop and setup-config.prop to enable cts patch and setup wizard for restore from cloud) > format data > Magisk-v21.0 > reboot and enjoy
[delete me]
DP FH said:
...
Click to expand...
Click to collapse
Thank you! I will post any workarounds I did to bring the smartphone to a nice stage. I can remember 1 now (google call app as default) and a fix for the "fast charge" animation/text in the lock screen.
1. Todo
2. Todo #2
The Nitrogen 11 performance is close enough (~10% difference in benchmarks) to the MIUI Android 10 (current stable/ official).