Hi all, I will try to explain my problem as best as I can and all software and versions I used before problem occurs.
Yesterday I tried to install cym 13.0, my phone wasn't rooted so I started with that step first. First I tried towelroot and my D620 wasn't supported, next I tried ioroot25 and there also wasn't supported, last thing i tried was kingroot 4.5. It worked, next I downloaded AutoRec.apk couldnt find for D620, later I saw it was D800 AutoRec.apk but it installed well, after instalation I had two options to go reboot in recovery mode and exit app, I just wanted to see if it worked and go into recovery so I can install all other stuff needed. And that's it when I pressed Recovery from App phone gone black and from then nothing I can do, no recovery mode, no download mode, phone doesn't turn on, no laying android, just nothing, dead... when I plug it in my PC with USB before it shows InternalStorage 8.0GB now it says RemovableDisk 70Mb and folders in it are "image" and "verinfo"....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's all.
Thank you
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Sent from my LG G2 Mini using XDA Labs
zcolek said:
Hi all, I will try to explain my problem as best as I can and all software and versions I used before problem occurs.
Yesterday I tried to install cym 13.0, my phone wasn't rooted so I started with that step first. First I tried towelroot and my D620 wasn't supported, next I tried ioroot25 and there also wasn't supported, last thing i tried was kingroot 4.5. It worked, next I downloaded AutoRec.apk couldnt find for D620, later I saw it was D800 AutoRec.apk but it installed well, after instalation I had two options to go reboot in recovery mode and exit app, I just wanted to see if it worked and go into recovery so I can install all other stuff needed. And that's it when I pressed Recovery from App phone gone black and from then nothing I can do, no recovery mode, no download mode, phone doesn't turn on, no laying android, just nothing, dead... when I plug it in my PC with USB before it shows InternalStorage 8.0GB now it says RemovableDisk 70Mb and folders in it are "image" and "verinfo"....
That's all.
Thank you
Click to expand...
Click to collapse
Hello. I was have this same issue. This procedure solved my problem with D618: youtube.com/watch?v=FXs7NAaTz4M&t=0s
hercules.mohamed said:
Hello. I was have this same issue. This procedure solved my problem with D618: youtube.com/watch?v=FXs7NAaTz4M&t=0s
Click to expand...
Click to collapse
Ok i tried this and I got my 8Gb free but usb disconnected and now when I connect phone PC doesn't recognize it it shows this in device manager and I don't have it like a disk in my computer.
Enter the download mode (firmware update) and use KDZ to upload a new firmware.
hercules.mohamed said:
Enter the download mode (firmware update) and use KDZ to upload a new firmware.
Click to expand...
Click to collapse
Sry but I can't enter download mode at all, none mode... and cant see storage on pc now....
This is how Win7 see my phone now after driver update
but still no storage and none mode...
zcolek said:
Sry but I can't enter download mode at all, none mode... and cant see storage on pc now....
This is how Win7 see my phone now after driver update
but still no storage and none mode...
Click to expand...
Click to collapse
In Disk Manager appears the disk?
hercules.mohamed said:
In Disk Manager appears the disk?
Click to expand...
Click to collapse
No, only my HDD
So what to do to see storage again? it was formated to 8gb FAT32
It shows RELINK HS-USB QDLoader 9008 and no storage at all
You need the correct driver for QDLoader 9008 Use the qualcomm one not the Relink one. You can get the drivers from my thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
You should just be able to follow the guide pretty much the way that it is written just use your phone model instead of the G3 and your tot instead of the G3 tot to restore your device. That should at the very least give you download mode and from there you should be able to flash your tot.
Hope that this helps.
l33tlinuxh4x0r said:
You need the correct driver for QDLoader 9008 Use the qualcomm one not the Relink one. You can get the drivers from my thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
You should just be able to follow the guide pretty much the way that it is written just use your phone model instead of the G3 and your tot instead of the G3 tot to restore your device. That should at the very least give you download mode and from there you should be able to flash your tot.
Hope that this helps.
Click to expand...
Click to collapse
Thx for your time! As you can see it shows RELINK, but sometimes it shows QUALCOMM it is random but in most cases it is RELINK. I tried to uninstall RELINK drivers but no success, they appears again. I also got no storage at all for my phone after it was formatted as FAT32. When I open my phone it is little different from G3 and if you wish I can take a picture of chip and post it. And I can't really can't find a tot file for my G2 MINI D620, all links that I came across are dead.
zcolek said:
Thx for your time! As you can see it shows RELINK, but sometimes it shows QUALCOMM it is random but in most cases it is RELINK. I tried to uninstall RELINK drivers but no success, they appears again. I also got no storage at all for my phone after it was formatted as FAT32. When I open my phone it is little different from G3 and if you wish I can take a picture of chip and post it. And I can't really can't find a tot file for my G2 MINI D620, all links that I came across are dead.
Click to expand...
Click to collapse
You have to go to device manager and click update driver and then manually select the qualcomm driver. Also you don't need to open your phone as it is already in HS-USB mode. Also you need to tot file for your phone. You may be able to convert a kdz file to tot if you cannot find a tot but I'm not sure. But I do know that you will need either a kdz or a tot to be able to flash. Without that you are out of luck.
l33tlinuxh4x0r said:
You have to go to device manager and click update driver and then manually select the qualcomm driver. Also you don't need to open your phone as it is already in HS-USB mode. Also you need to tot file for your phone. You may be able to convert a kdz file to tot if you cannot find a tot but I'm not sure. But I do know that you will need either a kdz or a tot to be able to flash. Without that you are out of luck.
Click to expand...
Click to collapse
Hi, I have KDZ file for my G2 Mini D620r with MSM8226 chipset but I can't use it with boardiag to extract it. As I can see when I extract KDZ with WindowsLGFirmwareExtract-1.2.5.0 to DZ and than opent that DZ with same program to se it contents I think that they are the same as in TOT file, but can't find way to extract them to .mbn not .bin and generate partitions.txt to use with BoardDiag... Some solution? Thx
zcolek said:
Hi, I have KDZ file for my G2 Mini D620r with MSM8226 chipset but I can't use it with boardiag to extract it. As I can see when I extract KDZ with WindowsLGFirmwareExtract-1.2.5.0 to DZ and than opent that DZ with same program to se it contents I think that they are the same as in TOT file, but can't find way to extract them to .mbn not .bin and generate partitions.txt to use with BoardDiag... Some solution? Thx
Click to expand...
Click to collapse
Try renaming the .DZ file to .tot and use boarddiag to extract that. If that doesn't work I'm not sure what else to do.
l33tlinuxh4x0r said:
Try renaming the .DZ file to .tot and use boarddiag to extract that. If that doesn't work I'm not sure what else to do.
Click to expand...
Click to collapse
I tried that already and BoardDiag says error MAX partitions... :/
Related
This tutorial is for the LG L5 II (E455/E460) and shall work on other LG phones too.
Many thanks to @iulykenoby who discovered this method.
To start, download a KDZ firmware for your LG E460 (and other phones) from here: http://lg-phone-firmware.com/index.php
Be sure to match the phone with the right kdz!!!
1. Download LG_KDZ_FW-Update_OfflineFix.ZIP (attached)
2. Download USB Driver http://algmcdn.lgmobile.com/dn/downloader.dev?fileKey=UW00120120425
If you can't boot anymore, enter into download/emergency mode and skip to step 5.
3. Put your phone in debugging mode (menu-Settings-Developer options-USB debugging).
4. Change your usb connection type to LG Software (menu-Settings-USB connection type)
5. Connect your phone to the PC and install USB Driver. After the installation disconnect and connect your phone again (to make sure it is detected).
6. Extract LG_KDZ_FW-Update_OfflineFix.ZIP
7. Run B2CAppSetup.exe and let it install and update itself. You may be prompted to update your drivers.
8. If you've done everything correctly, you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9. Close the official LG Mobile Support Tool.
10. Open Notepad in Administrator mode. (Go to windows menu, type notepad and right-click and run in Administrator mode)
11. Open the hosts file (c:\windows\system32\drivers\etc)
12. Add 127.0.0.1 csmg.lgmobile.com at the end of the host file.
13. Save the file. If the "Save as" dialog opens, it means you're not running notepad in administrator mode and you can't modify the hosts file.
14. Go to windows menu, type cmd and right-click and run in Administrator mode.
15. Drag Automatic Offline Procedure.vbs over command prompt and hit enter.
16. Click OK
17. Click on windows enable icon in system tray to turn ON then click the dialog box OK.
18. Click Ok.
19. Make sure Type is set to 3GQCT and phone mode to DIAG. Select your KDZ file and click Normal web upgrade test.
20. Click on Upgrade Start.
21. Click on Clear phone Software update Registry and then click OK.
22. Software Update Procedure will start immediately. It will take some time to finish.
After the flashing procedure, don't forget to delete that line you added in hosts or else you won't be able to officialy update (online) your phone and you won't be able to download anything from lg. Also, a factory reset may be needed after flashing to avoid conflicts with the old app data.
Ohhhhhh thx mircea, work for me. The problem was on step 19, now it's all ok.
marce78 said:
Ohhhhhh thx mircea, work for me. The problem was on step 19, now it's all ok.
Click to expand...
Click to collapse
You're welcome.
hey man thanks for the tutorial
I have a question though
what is the difference between version 10a, 10b, 10c ect
is it different firmware versions? can I flash a firmware from another country?
Is this official LG firmware?
Help me! My l5 e455 no more power
I followed all the steps and when the phone is not restarted, came in upload mode! Then I hung up and he did not start anymore!
Thanks for the tutorial. I needed that :good:
alonghinotti said:
I followed all the steps and when the phone is not restarted, came in upload mode! Then I hung up and he did not start anymore!
Click to expand...
Click to collapse
Try booting again in upload mode. If I remember right it's: phone off and both volume keys pressed then introduce the usb cable. if you manage to boot in download mode, you can try to flash again. you surely didn't select the right kdz for your phone. be sure of your phone model and search for the right kdz for your phone. If you can boot in download mode nothing is lost, you can fix it.
Work
mircea89fzr said:
Try booting again in upload mode. If I remember right it's: phone off and both volume keys pressed then introduce the usb cable. if you manage to boot in download mode, you can try to flash again. you surely didn't select the right kdz for your phone. be sure of your phone model and search for the right kdz for your phone. If you can boot in download mode nothing is lost, you can fix it.
Click to expand...
Click to collapse
It worked! I managed to get into download mode, and downloaded the correct ROM! Thank you!
alonghinotti said:
It worked! I managed to get into download mode, and downloaded the correct ROM! Thank you!
Click to expand...
Click to collapse
You're welcome! don't forget to press thanks.
tnx for the useful guide, new E455 owner here.
I'm looking for ROM backup solution, Root of course and a compatible CWM for thise model.
are there such tools out yet or we have to sit tight for a while?
Axims said:
tnx for the useful guide, new E455 owner here.
I'm looking for ROM backup solution, Root of course and a compatible CWM for thise model.
are there such tools out yet or we have to sit tight for a while?
Click to expand...
Click to collapse
For root, the attached file should work (change it's extension from .zip to .exe). Instructions here: http://forum.xda-developers.com/showthread.php?t=2337802
it will root with a chineese tool, but there you'll also find instructions to change it to supersu/superuser.
slipsystem said:
hey man thanks for the tutorial
I have a question though
what is the difference between version 10a, 10b, 10c ect
is it different firmware versions? can I flash a firmware from another country?
Is this official LG firmware?
Click to expand...
Click to collapse
you can flash any firmware from any country as long as it is for your phone model. i recommend you flash a firmware that's not branded (for ex branded by orange) so you won't have extra software that will slow down your phone. on that website you will find firmwares for many phones. our phone (e460) received an update, that's why they are called "a" "b" "c".
mircea89fzr said:
you can flash any firmware from any country as long as it is for your phone model. i recommend you flash a firmware that's not branded (for ex branded by orange) so you won't have extra software that will slow your phone. on that website you will find firmwares for many phones. our phone (e460) received an update, that's why they are called "a" "b" "c".
Click to expand...
Click to collapse
thanks alot man just the answer I was waiting for.
Malware
I suggest that you run that VROOT program in a sandbox as it is full of Malware or wait till someone posts an open source root exploitation method.
topkat0 said:
I suggest that you run that VROOT program in a sandbox as it is full of Malware or wait till someone posts an open source root exploitation method.
Click to expand...
Click to collapse
I suggest you change your antivrus. On virustotal.com out of 43 antivirus apps only 1 found it as malware.
https://www.virustotal.com/ro/file/...ace3dbf4a827df5c59748b095a23f2b4314/analysis/
Symantec: WS.Reputation.1 (http://www.symantec.com/security_response/writeup.jsp?docid=2010-051308-1854-99 )
I and others used vroot and had no problem with viruses or such. Stop spreading false information.
Malware
Mircea,
I dont use or trust online scanners I prefer to use IDA and other tools to examine software. If you examine the software more closely you will find that it sends your PC information back to the author. It will also do an update check and install of the latest version automatically. It will also install an apk for a chinese file sharing site and multiple other files that he leaves in the phones system. I also rooted a test phone and it did root perfectly. I was not trying to scare people just give a little warning to be cautious when you install a program that has a primary interface language is not yours. I had no ill intentions just trying to make people aware of what I had found.
topkat0 said:
Mircea,
I dont use or trust online scanners I prefer to use IDA and other tools to examine software. If you examine the software more closely you will find that it sends your PC information back to the author. It will also do an update check and install of the latest version automatically. It will also install an apk for a chinese file sharing site and multiple other files that he leaves in the phones system. I also rooted a test phone and it did root perfectly. I was not trying to scare people just give a little warning to be cautious when you install a program that has a primary interface language is not yours. I had no ill intentions just trying to make people aware of what I had found.
Click to expand...
Click to collapse
Yes, it installs a chineese apk because that's the root application (just like superuser). After installing supersu and deleting the chineese apk I scanned my phone with bitdefender and avg and found no malware.
You also can disable your internet before installing vroot on your computer, root your phone then uninstall it. Then you can scan your computer with any antivrus and antispyware software you want and you won't find a trace of Vroot. Before saying it's full of malware, you should prove it. I just proved with 43 antiviruses that it has no malware and all you're saying is you don't trust them. I also offered a solution to avoid sending information about your computer, IF that was the case. Also, using a sandbox just like you said is also ok.
How to get into download mode for e450
Sent from my LG-E450 using XDA Premium 4 mobile app
hussain59 said:
How to get into download mode for e450
Sent from my LG-E450 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Remove the battery, then reinsert the battery.
press volup + vol down
plug in the usb cable
.
your phone will start download mode
slipsystem said:
Remove the battery, then reinsert the battery.
press volup + vol down
plug in the usb cable
.
your phone will start download mode
Click to expand...
Click to collapse
Volume up down both buttons at a time got it thanks btw l5ii has a locked bootloader
Sent from my LG-E450 using XDA Premium 4 mobile app
Good morning.
I got a problem yesterday with my LG L5 II Dual phone: I caught my sisters pressing any buttons on it and when I saw what they did, there was an Android image on it. Now, every time I try to boot it, it cannot finish the initial setup, saying "Unfortunately, LGSetupWizard stopped."
I've rooted this phone some time ago, but the root seems to have no effect now. For instance, I deleted the following apps:
- Facebook
- Twittter
- All of "TIM" resources ("TIM Recarga, TIM Música, TIM this, TIM that"); "TIM" is the mobile operator of my phone.
I tried to follow the steps described in this post: "[Tutorial] Flashing KDZ on LG L5 II (E455/E460) and other LG phones", but I can't get my phone detected under "Download Mode", what I accessed using (Vol Up) + (Vol Down) keys while booting the phone. Unfortunately, it couldn't be detected in any workaround provided by this guide.
When connected under "Download Mode", I see a device called "LGE AndroidNet USB Modem" under "Modems" category on Windows Device Manager. It seems to be the only mode my phone could be detected under this mode.
Playing around with it, I could access a "Recovery Mode" by (Vol Up) + (Quick Access) keys while booting up the phone. I tried to get some info about it and I could, at least, use it with ADB. But I have read-only access, not read-write anymore. Searching more trying to get an answer to "ADB Force Root Mode", I got some things to notice, like the file "default.prop" under the phone's root system.
This "default.prop" shows the following 6 first lines:
Code:
ro.secure=1
ro.allow.mock.location=0
persist.mtk.aee.aed=on
ro.debuggable=0
persist.sys.usb.config=charge_only
persist.service.acm.enable=0
which means, I think, the phone now isn't configured for USB debugging neither for system write permission.
What can I do to, at least, try to delete some files on it, specifically the 4 setup wizard ones, located at "/system/app/" under the names "LGSetupWizard_JB.apk", "LGSetupWizard_JB.odex", "SetupWizard.apk" and "SetupWizard.odex", since these are the ones which I'm dealing with?
Ah. I tried on computers running Windows 8.1 and Windows XP SP3. No luck.
(edit: 2014-04-02, 23:16 UTC -03:00)
I've playing around with ADB trying to run it with another mode. I don't know if this can help, but sending the phone to recovery mode using ADB
Code:
adb reboot recovery
I get an Android lying with a red triangle sign over it... Still searching for a procedure or an answer to fix the phone, but still with no luck.
[Solved] Guide to solve this kind of problem
After looking for a while on how to fix the problem either by trying to run an ADB shell as root either by flashin the ROM, I could figure another way to flash the original "TIM" rom for my phone instead of the one described on the topic "[Tutorial] Flashing KDZ on LG L5 II (E455/E460) and other LG phones". Here's the way out:
1. Downloading firmware KDZ Flash ROM
First, you have to download the original KDZ ROM for your phone. It can be found at the link below:
LG Optimus L5 II Firmware List
The ones for Brazilian users are described in the page. For TIM users, I suggest using firmware 33 BTM/TIM(BRAZIL), size 599.09 MiB.
Since my phone was sold by TIM, I can't tell about another mobile operators, like Claro, Oi, and VIVO.
2. Extracting a binary file from the KDZ Flash ROM
After that, you will need to extract the KDZ file using LGExtractor (and not DZExtractor).
You can download it from here as an autoextractor file: <4shared>. It will extract itself to C:\RecoverE455\Extract.
Put your KDZ file on an easy access folder. I will assume you will use C:\RecoverE455\ROM for this.
Launch an Administrator command line prompt, and run this command:
Code:
C:\RecoverE455\Extract\LGExtractor -kdz C:\RecoverE455\ROM\<KDZ-ROM-FileName>.kdz
Again, I assume you will put evertything under C:\RecoverE455.
Now, you have a cabinet (CAB) file in the same folder of your KDZ ROM. Extract it directly and you will get some structure similar to this:
DLL (folder)
LGE... (binary rom)
LGUP... (dll file)
3. Getting a most recent version of LGFlashTool
After this procedure, you will have to download LGFlashTool in order to flash you newly extracted BINARY rom.
You can download it from here as an autoextractor file: <4shared>. It will extract itself to C:\RecoverE455\Flasher.
Run the Setup program attached within it and it will install itself under the folder C:\LG\LGFlashTool. Overwrite the file MegaLock.dll under this folder with the one you just extracted in C:\RecoverE455\Flasher.
4. Install the correct LG Support Drivers for your E455 phone
Instead of installing the most recent version of LG Drivers provided by LG, you will install the following ones:
LG United Mobile Driver 3.8.1
LG Windows Mobile 1.0
LG SmartPhone DUN Modem Driver 1.0
They are packaged and you can download them from here as an autoextractor file: <4shared>. It will extract itself to C:\RecoverE455\Drivers. Install them in the order described above then restart your computer.
5. Put your phone under Download Mode
To do this, turn off your phone either directly either removing and reinserting the battery.
Plug the phone - WHILE TURNED OFF - on your computer by the USB cable.
Hold (Vol Up) + (Vol Down) and turn on the phone. Keep holding (Vol Up) + (Vol Down) until you see the line "==>Download mode" in bottom of the screen. If it doesn't appear, try until you get this.
6. Configuring your computer to flash under USB download mode
After plugging your device under Download Mode, open Windows Device Manager and search for some LGE AndroidNet USB Serial Port (COM##):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it is not (COM41), you must set it to port (COM41). Set properties of the serial port, select tab "Port Settings", then click "Advanced":
Here, select (COM41) for COM number port.
7. Launch LGFlashTool and flashing
Open your newly modified LGFlashTool (yes, the one you downloaded here and replaced some DLL). It immediately will ask for your BINARY rom and a DLL:
Click the "..." button and select the LGUP***.DLL in the same folder as your .BIN file you extracted in step 2.
Click the "Add" button immediately below (side S/W box), then select the LGE***.BIN you extracted in step 2.
Click OK.
Click the serial port button --
--, and let this dialog be equal as this one, with only "16 ports\Port 1 ~ Port 16\1" marked:
And now click the forward button --
.
It will display READY on box with port COM41.
Disconnect your phone, turn it off, then turn it on under Download Mode as described on step 5.
If you manage to turn it on Download Mode without connecting to your computer, plug it back to the computer.
It will begin flashing by itself. No action needed.
DO NOT DISCONNECT YOUR PHONE. I DON'T KNOW WHAT MAY HAPPEN IF YOU DO SO, BUT PROBABLY YOU WILL BREAK DEFINITIVELY YOUR DEVICE.
After all, your phone will restart with all its original configuration and LGFlashTool will display an error. After you manage to finish LGSetupWizard on the phone, you may close everything.
Man, you are a HERO.
I was having trouble debranding and updating my phone, but with your tutorial, it was EASY! Now I have a debranded and updated phone (V10K).
MANY MANY MANY THANKS!!!
Again, I assume you will put evertything under C:\RecoverE455.
Now, you have a cabinet (CAB) file in the same folder of your KDZ ROM. Extract it directly and you will get some structure similar to this:
DLL (folder)
LGE... (binary rom)
LGUP... (dll file)
i couldn't find these, i've done instructions carefully ... help me pleasee !!! :crying:
reresatria said:
Again, I assume you will put evertything under C:\RecoverE455.
Now, you have a cabinet (CAB) file in the same folder of your KDZ ROM. Extract it directly and you will get some structure similar to this:
DLL (folder)
LGE... (binary rom)
LGUP... (dll file)
i couldn't find these, i've done instructions carefully ... help me pleasee !!! :crying:
Click to expand...
Click to collapse
solved :laugh: , just doin' little mistake ... thanks man for tutorial
Hi! I'm here again!
I'm trying to do everything again, but now in my new phone, a D685 (LG G Pro Lite Dual).
But, when I connect it in download mode, FlashTool give me an error just after "USB Connection established". No description of the error, just a "F0000002"...
You know how to solve this?
LG 455 IMEI Problem
Hi,
I flash my phone following this instructions a month ago, all gone ok but yesterday both sims come into negative band and i discover IMEIS changed. I try to rewrite imeis from back label under batteries by all the ways i know, but none works. The AT command method via engineer menu or Putty console responds OK but doesnt change anything; same thing with MTKTools.
The las chance, i think, its by meta mode imei an sn change tools, like Maui META or SN_STATION, but i cant enter the phone in meta mode or cant find the correct drivers; every times programs fail attemping to connect to phone...
Please if some know some clues make me know!!!!
niconiconico111 said:
Hi,
I flash my phone following this instructions a month ago, all gone ok but yesterday both sims come into negative band and i discover IMEIS changed. I try to rewrite imeis from back label under batteries by all the ways i know, but none works. The AT command method via engineer menu or Putty console responds OK but doesnt change anything; same thing with MTKTools.
The las chance, i think, its by meta mode imei an sn change tools, like Maui META or SN_STATION, but i cant enter the phone in meta mode or cant find the correct drivers; every times programs fail attemping to connect to phone...
Please if some know some clues make me know!!!!
Click to expand...
Click to collapse
The AT commands worked for me. In putty, be sure to get "IMEI changed" as response, and check the number. If I remember, the IMEI is comma seppareted.
[SOLVED]
romulocarlos said:
The AT commands worked for me. In putty, be sure to get "IMEI changed" as response, and check the number. If I remember, the IMEI is comma seppareted.
Click to expand...
Click to collapse
Hi, thanks for the reply!
Yes, finally the solution was simple, instead of using AT+EGMR command I use AT%IMEI=, that worked!!
can u solve it ?
romulocarlos said:
Hi! I'm here again!
I'm trying to do everything again, but now in my new phone, a D685 (LG G Pro Lite Dual).
But, when I connect it in download mode, FlashTool give me an error just after "USB Connection established". No description of the error, just a "F0000002"...
You know how to solve this?
Click to expand...
Click to collapse
hii, how about this problem ? have you solved it ? can u tell me how do it ... i've got same problem,
reresatria said:
hii, how about this problem ? have you solved it ? can u tell me how do it ... i've got same problem,
Click to expand...
Click to collapse
FlashTool can't work with this phone. Instead, search here on XDA about flashing KDZ larger than 1Gb. Is an offline method.
help
romulocarlos said:
FlashTool can't work with this phone. Instead, search here on XDA about flashing KDZ larger than 1Gb. Is an offline method.
Click to expand...
Click to collapse
thx for reply, i'm using L5 II E455 before i've tried your method about twice and it's work, but since i restart my phone and got an android laying with a red triangle over it, i can't flashing again, it got problem error F0000002 ...
goo(dot)gl/R43Jmj if you don't mind click the url
reresatria said:
thx for reply, i'm using L5 II E455 before i've tried your method about twice and it's work, but since i restart my phone and got an android laying with a red triangle over it, i can't flashing again, it got problem error F0000002 ...
goo(dot)gl/R43Jmj if you don't mind click the url
Click to expand...
Click to collapse
I'm sorry, I make a mistake. My answer above was for another thread.
This method works with E455, just check the drivers and everything else again, and if possible, use a clean computer.
Again, sorry for my mistake.
still can't
romulocarlos said:
I'm sorry, I make a mistake. My answer above was for another thread.
This method works with E455, just check the drivers and everything else again, and if possible, use a clean computer.
Again, sorry for my mistake.
Click to expand...
Click to collapse
still i can't flash my phone,
Thank you very much, I could not recover the phone all the time, the update always stuck to 4%. When this has helped me! Just when I launched the BAT extractor, it deleted all the contents of the parent folder.
Sorry, I don't follow this thread anymore and don't keep the files online anymore. There are several other threads to be found.
Softbricked? Don't worry, you can fix it if you can read.
Download all the files and extract zips.
Install drivers and LGFlashTool (Flashtool will install to path C:\LG\LGFlashTool)
Add the unzipped tot (firmware) and Megalock dll file to the LGFlashTool folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Put phone in download mode: Turn phone off, push and hold volume up and plug USB cable into phone
Open device manager (Windows Start>control panel>device manager)
Select Port connection for phone (COM and LPT>LGE Android Net for VZW USB Serial Port)
Change the port to COM41 (Right click on the specified port, select properties, left click port setting tab. Click advanced. Change COM Port Number to COM41. Click OK. Click OK.
If you don't see the phone, click View in Device Manager, then click Show Hidden.
Start LGFlashtool. Specify the dll and tot to flash by checking "Select manual mode." Left click the "..." button and select the dll. Left click the "Add" button and select the tot. Click OK to close the file selection window.
Click the yellow arrow and wait patiently. Loading the firmware takes a few.
View attachment 2870130
When FlashTool shows Ready, disconnect the phone for ~5 secs. Upon reconnecting the phone, FlashTool will automatically run. This will take a few moments, so go get a cup of coffee. When the phone shows a blue screen with a bid red 3, you're good to go. Disconnect the phone and pull the battery briefly. Restart the phone and redo the setup. Shutdown Flashtool to prevent any accidents when rerooting.
New LG G3 for you and me! [emoji106][emoji106][emoji106]
Here is an alternate method using KDZ developed for people who took the C update.
http://forum.xda-developers.com/showthread.php?t=
[emoji12]
Reserved.
Thanks to @216Monster and @droidkevlar for the additional download sites and support.
There are several other guides that cover this process in various forums. This is written from my experience after soft bricking with a build prop edit without knowing how to get back to stock first. I hope this guide makes it easier for folks in the same Big Red boat.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
I installed the driver on my work computer which is Windows XP and this is what I get in the device manager, it doesn't recognize it although I am connected to the computer in download mode. I have the Verizon LG G3 so I even tried to install the dedicated Verizon drivers that I found in this thread and still no go. Please help on finding drivers for windows XP.
Eyalkn said:
I installed the driver on my work computer which is Windows XP and this is what I get in the device manager, it doesn't recognize it although I am connected to the computer in download mode. I have the Verizon LG G3 so I even tried to install the dedicated Verizon drivers that I found in this thread and still no go. Please help on finding drivers for windows XP.
Click to expand...
Click to collapse
I got that and then I unplugged the USB, waited a few seconds and plugged it back in and it then showed under communications.
lexluthor said:
I got that and then I unplugged the USB, waited a few seconds and plugged it back in and it then showed under communications.
Click to expand...
Click to collapse
Thank you it worked and I am back
ins5736 said:
Softbricked? Don't worry, you can fix it if you can read.
Downloads:
https://drive.google.com/folderview?id=0B7379qhBA5bnVWQwLU9GNkk3ZGs&usp=sharing
http://www.mediafire.com/download/6...22jjhk7g3kgz/LG_G3_VS985_10B_03_Stock_TOT.zip
http://fs1.androidfilesharing.com/d123f6f2cfa13038
Download all the files and extract zips.
Install drivers and LGFlashTool (Flashtool will install to path C:\LG\LGFlashTool)
Click to expand...
Click to collapse
Couldn't get the flashtool to download. One file is an .ink file and nothing happens when i try to download the flashtool at the right of the screen.
Edit: Got the files downloaded, when I run flashtool without a device attached it has a login screen, I'm assuming this won't occur if the phone is hooked up to it?
dlscott1111 said:
Couldn't get the flashtool to download. One file is an .ink file and nothing happens when i try to download the flashtool at the right of the screen.
Edit: Got the files downloaded, when I run flashtool without a device attached it has a login screen, I'm assuming this won't occur if the phone is hooked up to it?
Click to expand...
Click to collapse
Yes.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
I am an experienced Android hacker, and still got a bit lost with the tutorial. While I appreciate the excellent work here, you might consider editing/adding the information to help clarify the following:
1. The TOT file at http://www.mediafire.com/download/6i..._Stock_TOT.zip, https://drive.google.com/folderview?id=0B7379qhBA5bnVWQwLU9GNkk3ZGs&usp=sharing, and http://fs1.androidfilesharing.com/d123f6f2cfa13038 are all identical - and we only need one or the other. Please identify the other TOT links as mirrors to the same file, so people aren't downloading all of them unnecessarily (especially as they each are so very large).
2. There is already a MegaLock.dll file installed in the LGFlashTool folder once the application is installed. When you say add .dll files to the LGFlashTool folder, please clarify if MegaLock.dll needs to be overwritten by the other file with the same name (found in Setup_LGFlashTool_1.8.1.1023.zip), or otherwise. It might also help to clarify specifically which dll files are moving to the LGFlashTool folder, and from where. I ended up overwriting the default MegaLock.dll with the one you provided before I started the process...
3. Ports won't often show in Device Manager unless you go to View and then Show Hidden Devices in the Device Manager application.
4. After clicking the yellow arrow, unplugging and plugging the phone back in did nothing to start the process. Nor did plugging it back in while holding volume up (like in your 2nd step). I had to unplug, power the phone on, and then when the red Verizon screen appeared I plugged back in. This triggered the start of the Flash process. An easy way to tell you're in the right spot during the process: the red Verizon screen will disappear and a Firmware Updating screen will pop up to show you progress on the phone. When done, the phone will power cycle automatically...then, after a few other brief items, the red "3" on the blue screen will appear.
WARNING: Don't forget to close the LGFlashTool on your PC when you're done. Because...if you have anything else to do during the same session (such as rooting the phone), when you power cycle the phone while it's still plugged into your PC, LGFlashTool will take over and proceed to flash your phone again!!
Thanks again for your hard work. The tutorial was indeed helpful.
hijax2001 said:
Thanks again for your hard work. The tutorial was indeed helpful.
Click to expand...
Click to collapse
Thanks for the feedback. OP modified.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Sorry if this has been answered in one of the other threads on this topic, but does this reset the root flag/counter like it did on the g2? Thanks.
tom1226 said:
Sorry if this has been answered in one of the other threads on this topic, but does this reset the root flag/counter like it did on the g2? Thanks.
Click to expand...
Click to collapse
As far as I know, but I rerooted immediately.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
ins5736 said:
As far as I know, but I rerooted immediately.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Click to expand...
Click to collapse
Haha thanks. Just curious in case something goes funky hardware-wise. My g2 screen went wonky after a few months and I had to warranty it, unrooting was easy. Hope this pulls through if I ever need to!
Thank you so much for this you saved my ass. I tried to restore my original build.prop but forgot to fix permissions and it totally bricked my phone D:
ins5736 said:
Softbricked? Don't worry, you can fix it if you can read.
New LG G3 for you and me! :thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
>>>FIXED, SEE BELOW
I'm trying this and I am stuck. Got all files downloaded, installed lg tool and got to the point of restarting the phone into download mode. No problem there. Issue is I can't find the COM ports in the device manager. Running Windows 8.1 pro, don't see a section for the COM ports. I do see CDC EM, CDC Serial and LGE Android Phone, but when I right click, there is no PORT option to change....
I know I am getting close if I can just figure how to change the port on the device manager.
Any help?
update>>>when i double click the lge android phone in dev mgr, it says drivers are not installed. I have installed drivers. I also tried removing drivers and rebooting then reinstalling drivers, same thing. It shows up but looks like it can't find the right drivers.
>>>>FIXED. Removed lg flash tool. Removed drivers. rebooted. reinstalled everything. plugged in the usb and phone showed up this time, was able to change to com41 and it worked. Not sure what happened but it worked flawless this time...
THANK YOU!!!
Thanks
viper3two said:
>>>FIXED, SEE BELOW
I'm trying this and I am stuck. Got all files downloaded, installed lg tool and got to the point of restarting the phone into download mode. No problem there. Issue is I can't find the COM ports in the device manager. Running Windows 8.1 pro, don't see a section for the COM ports....Removed lg flash tool. Removed drivers. rebooted. reinstalled everything. plugged in the usb and phone showed up this time, was able to change to com41 and it worked. Not sure what happened but it worked flawless this time...
THANK YOU!!!
Thanks
Click to expand...
Click to collapse
Glad you got it sorted! The second law of IT support (unistall and start over) saves the day again.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
ins5736 said:
Glad you got it sorted! The second law of IT support (unistall and start over) saves the day again.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Click to expand...
Click to collapse
LOL!! Yea Im an IT manager so I know that one for sure. If all else fails, reboot or uninstall and start over!
Thanks again for this method, it worked out great. Glad to know I got a fallback if I jack something up
Tony
Quick question, apologies if it's idiotic -- basically I (stupidly, it turns out) tried to change my VZW boot animation. No dice. But now I can't get the old one back to working again, which is buggin me out.
QUESTION: Would reflashing to stock in the manner described in this thread completely restore the phone, including that boot animation? I'm just crazy enough about this to actually do it, if it'd work.
Thanks A TON for any info.
marlowe310 said:
Quick question, apologies if it's idiotic -- basically I (stupidly, it turns out) tried to change my VZW boot animation. No dice. But now I can't get the old one back to working again, which is buggin me out.
QUESTION: Would reflashing to stock in the manner described in this thread completely restore the phone, including that boot animation? I'm just crazy enough about this to actually do it, if it'd work.
Thanks A TON for any info.
Click to expand...
Click to collapse
I would think. I'm new to the g3, but I think this is a tool to restore to stock out of the box. Relating to an Odin restore with Samsung. Someone correct me if I'm wrong.
Sent from my VS985 4G using XDA Free mobile app
It would work. You might want to look around for the boot ani first though.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Hello to you all I am making this flashing tutorial since I have seen enough people asking how to flash using this tool.
This tutorial will be 100% detalied and noob friendly, with pictures. So fasten your seatbelt and let's go.
1. Disclaimer:
Code:
I am not responsible for bricked devices, dead SD cards, thermonuclear war,
or you getting fired because the alarm app failed. Please do some research if you have any
concerns about all contained in this tutorial before you follow it! YOU are choosing to
make these modifications, and if you point the finger at me for messing up your device,
I will laugh at you. But since i'm a nice dude i will try to guide you anyway:)
2. General info:
This can be used to flash a new firmware that you will download from LG firmware website. You can upgrade/downgrade your current version.
This can be used for every situation that can get you in a working Emergency mode/Download mode.
This will work/not work (I didn't test) on versions grater than Windows 7 both 32 and 64 bit. I am not going to give support to Windows 8/Windows 8.1. If it works for you it's nice. If not I will ignore the posts like "What can I do not working on Windows 8" and so on. Same thing goes for WINE (windows loader for LINUX). Use this with Windows XP or 7.
3. What we need and getting ready:
a. Firstly, we need the Drivers for our Phone. The drivers I am attaching must be universal for LG but if they do not work for you then you need to search the drivers the manufacture made for your device.
Universal Driver for LG (TRY THIS FIRST BEFORE YOU GO AND DOWNLOAD FROM LG WEBSITE): LG Drivers.
Install the driver (the one I provided first). If your phone is not detected then search on LG website.
*If the ones I provided don't work you can fine the ones for your phone here: http://www.lg.com/. Search in the right up corner the model of your device. Select it. At download section (in the right of the mini-phone picture) you will see Software Updates & drivers. Select that and download the USB Drivers for Windows.
b. Secondly, we need the KDZ image that you want to flash. I am not going to provide any; you will download the one that you want FOR YOUR DEVICE (do not use any KDZ not intended for your device) from here: http://lg-phone-firmware.com/.
Press on the phone you have and download the image you want.
c. In the third place you want to download the tool: LG Flash Tool 2014.
*You need Winrar or 7Zip or any unraring program. Unrar it.
4. The actual flashing:
A)YOUR PHONE SHOULD BE IN EMERGENCY/DOWNLOAD MODE. The keys to do this are different from device to device so search the forums for your key combination. I will provide the way to get in Emergency for the L7 II and maybe L5 II and L3 II. Think this is the same for the first gen devices but can't confirm.
*With the phone turned off (I suggest to pull out battery for 5 seconds then put it back to be sure) hold Volume Down button and plug the USB cable that you have in your PC. If this doesn't work try holding Volume Down + Volume Up and plug the USB. If this doesn't work search the forums. You might also have a hard bricked device and this method won't work then.
B)Place the KDZ file you downloaded the 3.b. in the same folder that you unrared at 3.c. and Run as Administrator. (BE SURE TO HAVE THE KDZ FILE IN THE SAME FOLDER AS THE TOOL. The file i took for example is "Stock JB ROM.kdz").
*If you can't open this program then you need to instal this: C++ Libraries.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C)This will appear. Leave all the way it is and press the little folder in the right.
D)Select the KDZ you placed at point 4.B. and press Open (DO NOT SELECT RA or RC KDZ).
E)After you pressed Open you are back to the main screen you saw at point 4.C. Good.
Press Normal Flash (the left option) if you want to flash new KDZ preserving data (no data will be deleted). I do not suggest this because you might get a bootloop and you need to hard-reset (will wipe data). Always have all data backed-up.
Press CSE Flash (recommended) if you want to flash new KDZ with full wipe of data.
After selecting what you want you will get this screen.
Press START.
D)After you pressed START you will get this. DO NOT CHANGE ANYTHING, press OK.
E)Another dialog will pop and will flash your phone. First it will check USB connection but you already have USB connected when you got in Emergency so you should be fine. I assume you checked drivers at the Driver step so I assume there will be no problems.
IMPORTANT: DO NOT EVER DISCONNECT THE DEVICE EVEN IF YOU THINK IT'S STUCK, THE WINDOW GOT BLOCKED, IT DOESN'T SHOW ANYTHING OR ANYTHING ELSE. YOU CAN DESTROY YOUR DEVICE DO NOT UNPLUG AFTER YOU PRESSED OK AT STEP 4.D. WHEN THE DEVICE REBOOTS LEAVE THE USB IN FOR 2 MORE MINUTES THEN YOU CAN UNPLUG.
F)In some cases you might get a bootloop after 4.E. is completed. All you have to do is hard reset your device. Search the forum for specific hard-reset procedure. In P710 it's like this: with powered off device hold Volume Down + Home button and press Power. When you see LG logo stop holding Power. Keep other 2 buttons until you see android guy.
That's all folks and now the credits:
@quangnhut123 - He made this tool for us
me - Well I wrote this haha.
If you like it please consider donating. Thanks ^.^. Also do not forget to at least press THANKS button.
plss,in the CSE mode it stopped at extracting software @32/33% and said check the status of your pc and retry then in normal mode @ 33% it stopped showing the percentage signal but still displaying extracting software..
daniels1221 said:
plss,in the CSE mode it stopped at extracting software @32/33% and said check the status of your pc and retry then in normal mode @ 33% it stopped showing the percentage signal but still displaying extracting software..
Click to expand...
Click to collapse
Do not remove the phone. It can stuck. Let it stay if it doesn't give an error.
works on Windows 8.1
Unable to update maybe connection error
i have attached screenshts . my device is connected as device manager says but still connection error. okease help
Trying to fix my LG Optimus L5 II
Hi guys, i'm having troubles with this method, tried both on win8.1 and 7 and i can't find a solution, maybe my phone is gone forever.
My problem is bootloop, and the phone isn't unrooted or modded in any way.
I'll explain what i tried:
-Hard reset (volume down+quickbutton+powerbutton) -> it only keeps vibrating an never showing the LG logo, when i release the buttons it just starts as normal (obviously bootloops).
-Update recovery with LGMobile Support Tool -> phone connects, firmware finish download, and then when it starts updating it just stops and says update failed for some reason.
-Flashing with LG Flash Tool 2014 -> It crashes after the extraction, maybe when it starts to flash.
thank you so much!!!
okay so, i made an account just so i could thank you for this tutorial and the software.
My LG L5 II (e460) was stuck in a bootloop and a hard reset did nothing for me. When i tried another flashing tut i got an error when the files were extracting in the lg mobile support tool. With yours i got the same error when i tried a flash with a full wipe of data to avoid the now dreaded bootloop. However when i tried a flash without loss of data it did actually do its job well. I work on a 64 bit with windows 8.1 computer btw. Once completed it did not give me a bootloop so it actually turned on, and thats a first in a long time. After that i did do a hard reset and now its as new.
So thank you thank you thank you! Thanks to this tut i am now able to gift my dad my once broken phone as if it just came out of the packaging!
honeyybagel said:
okay so, i made an account just so i could thank you for this tutorial and the software.
My LG L5 II (e460) was stuck in a bootloop and a hard reset did nothing for me. When i tried another flashing tut i got an error when the files were extracting in the lg mobile support tool. With yours i got the same error when i tried a flash with a full wipe of data to avoid the now dreaded bootloop. However when i tried a flash without loss of data it did actually do its job well. I work on a 64 bit with windows 8.1 computer btw. Once completed it did not give me a bootloop so it actually turned on, and thats a first in a long time. After that i did do a hard reset and now its as new.
So thank you thank you thank you! Thanks to this tut i am now able to gift my dad my once broken phone as if it just came out of the packaging!
Click to expand...
Click to collapse
You are welcome my friend. Usually this tool has problems on windows 8.1 (the errors you are talking about). With a Windows 7 machine works from first try. I am satisfied that I made your day. Peace out
Firstly - nice tutorial,really! Secondly - Why "LG firmware Updater Tool 2014" not "KDZ Firmware Updater" ? They are almost the same. And thirdly - from my expirience with KDZ reflashing on P713(was stuck with bootlogo), and also from 4pda comments, it's better to turn Emergency mode on phone(Vol.Down and then insert USB)(e.g. "Bootloader" mode isn't so easy to turn on as "Emergency"), - and Choose "Emergency" or "CS_Emergency" not "Diag" one) on step 4C. Also,if You're goin' to flash NON-cdma phone(as I know usually L7-ll isn't cdma),on step 4C it's better to choose "3gqct" not "cdma". And the last one - it should work on win8,but shouldn't work correctly via Windows 10 or Wine.
Have a nice day))
DS_katauri said:
Firstly - nice tutorial,really! Secondly - Why "LG firmware Updater Tool 2014" not "KDZ Firmware Updater" ? They are almost the same. And thirdly - from my expirience with KDZ reflashing on P713(was stuck with bootlogo), and also from 4pda comments, it's better to turn Emergency mode on phone(Vol.Down and then insert USB)(e.g. "Bootloader" mode isn't so easy to turn on as "Emergency"), - and Choose "Emergency" or "CS_Emergency" not "Diag" one) on step 4C. Also,if You're goin' to flash NON-cdma phone(as I know usually L7-ll isn't cdma),on step 4C it's better to choose "3gqct" not "cdma". And the last one - it should work on win8,but shouldn't work correctly via Windows 10 or Wine.
Have a nice day))
Click to expand...
Click to collapse
It is not cdma but doesn't have any impact. I can flash from emergency with Diag Mode also since the LG Modem is picked up in device manager in Emergency, so it should work.. Also I said that phone should be in emergency
neutrondev said:
Hello to you all I am making this flashing tutorial since I have seen enough people asking how to flash using this tool.
This tutorial will be 100% detalied and noob friendly, with pictures. So fasten your seatbelt and let's go.
....
Click to expand...
Click to collapse
Hello mate. Thank you for the tutorial. It's now very easy using LG Flashtool 2014.
All of the instructions worked for my L7 II P714. Now I have a clean stock JellyBean rom without the silly customizations from the Operator.
This L7 II has a very nice camera!
I got the clean JB KDZ from here:
HTML:
JellyBean V10E_00
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW54TARE02PNAJ2373E0W7A/V10E_00.kdz
It's from Panama.
Cheers.
- Leonardo
Thanks!
This project is now discontinued. Peace out.
Sent from my LG-D855 using XDA Free mobile app
Help me!
so i have an lg optimus l9 2 and it's stuck on boot loop i followed every step carefully but the lg phone software website does not work! i can't search for anything so i can't get the kdz required to fix this problem can anyone provide a link where i can find the right kdz for my lg optimus d605 model from germany? thanks :good:
The tool works 100% on Windows 10 (Pro, 64-bit, Creators Update). You don't need any special drivers, they are built into Windows 10.
There seems to be two problems. But fixing one will fix the other. So I'll go there first.
I can no longer get LGUP to recognize my phone. Fix this and I can reflash LGH962AT-ROOT and start over. My computer recognizes my phone and I can transfer files between them.
It is really hard to get into recovery, but I have through LGUP. My recent attempts shows the dead droid with the red triangle. I think I may have killed recovery and that may be why I can't use LGUP.
My phone otherwise mostly healthy. :good: I can't get Xposed to install and work. I had it working before my last reset. I accidentally killed my Contacts and Dialer. I can't Flashify/FlashFire LGContacts. 20/20 hindsight - I forgot to TB before messing with the Dialer/Contacts.
I am 100% willing to lose everything and start from scratch. If someone could help me get LGUP to work again I will be so grateful.
At least I didn't soft or hard brick it. . . . . . this time. (See my signature)
Can somebody help me to reconnect to LGUP? I have researched and found nothing that worked. (unless I did it wrong)
I'm begging and pleading here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seriously guys. I need help. I'll even pay for the help.
I give you my fix cause i had the issue to. 2 things. Lg up and drivers.
1. Download uninstaller from iobit
2. Uninstall lgup and its dll (use batch uninstall to uninstall at the same time)
3.once uninstalled you see an option called powerful scan. Click it and then delete all them files it picks up.
4. Install lgup and its dll file
5. Reinstall the drivers with the phone pluged in
6. Run lgup and it should work. If you need the files. The lgup tool plus dll and drivers i dont mind helping out. I really hope this helps
It almost worked. LGUP couldn't find my phone as usual. Then as I was about to give up, when it asked about Port and Version. As soon as I clicked to continue, it errored. I will try again in an hour. From scratch from your instructions.
LASERWOLF452 said:
1. Download uninstaller from iobit
2. Uninstall lgup and its dll (use batch uninstall to uninstall at the same time)
3.once uninstalled you see an option called powerful scan. Click it and then delete all them files it picks up.
4. Install lgup and its dll file
5. Reinstall the drivers with the phone pluged in
6. Run lgup and it should work. If you need the files. The lgup tool plus dll and drivers i dont mind helping out. I really hope this helps
Click to expand...
Click to collapse
I followed it to the letter. I think it might be my phone, not my computer. Again, I will try once more in an hour.
Lord Sekhmet said:
It almost worked. LGUP couldn't find my phone as usual. Then as I was about to give up, when it asked about Port and Version. As soon as I clicked to continue, it errored. I will try again in an hour. From scratch from your instructions.
I followed it to the letter. I think it might be my phone, not my computer. Again, I will try once more in an hour.
Click to expand...
Click to collapse
Ok i wanted to try to help i have the v10 vs990 and at times it give me problems so i hoped it would work for your v10 even if its another carrier. If it dont work. At least i tried to help u out
I redid all the steps. I got nothing. Not even the blip of hope I had gotten before.
Any other ideas?
Again, I am willing to pay and ship my phone if necessary. It is that bad.
Lord Sekhmet said:
I redid all the steps. I got nothing. Not even the blip of hope I had gotten before.
Any other ideas?
Again, I am willing to pay and ship my phone if necessary. It is that bad.
Click to expand...
Click to collapse
sorry it did not work out, i wish i knew but thats all i can think of, i do hope someone can help you out
I got a little hope. I got LGUP to not shut down completely. I am stuck on Model List COM3. Problem is it has Model Unknown.
Also, I am trying to contact LG Service & repair to see if they can save my phone.
Does the lg bridge software recognize it?
Sent from my LG-H901 using XDA-Developers mobile app
The LG Bridge helped a lot. My phone isn't fixed yet, but things are looking much better.
LG Bridge updated my phone to Marshmallow. Lost root of course. But I still don't have the missing programs, LG Contacts and LG Phone.
I uninstalled LGUP and Mobile Driver and then re-installed them. I got an interesting note.
*EDIT re-ran Mobile driver. No errors. I still can't get LGUP to recognize my phone.
Device driver software was not successfully installed
Unidentified Devise X Failed
LGE Mobile USB Composite Device ✔ Ready to use
LG V10 ✔ Ready to use
LGE Mobile USB ✔ Modem Ready to use
LGE USB Serial Port (COM4) ✔ Ready to use
Unidentified Device X Device unplugged
You can change your setting to automatically search Windows Update for drivers
Change Setting
Lord Sekhmet said:
The LG Bridge helped a lot. My phone isn't fixed yet, but things are looking much better.
LG Bridge updated my phone to Marshmallow. Lost root of course. But I still don't have the missing programs, LG Contacts and LG Phone.
I uninstalled LGUP and Mobile Driver and then re-installed them. I got an interesting note.
*EDIT re-ran Mobile driver. No errors. I still can't get LGUP to recognize my phone.
Device driver software was not successfully installed
Unidentified Devise X Failed
LGE Mobile USB Composite Device Ready to use
LG V10 Ready to use
LGE Mobile USB Modem Ready to use
LGE USB Serial Port (COM4) Ready to use
Unidentified Device X Device unplugged
You can change your setting to automatically search Windows Update for drivers
Change Setting
Click to expand...
Click to collapse
When I updated to MM the "same" happened, it didnt install the apps I had deleted or frozen with Titanium Backup. I guess if we choose refurbish instead it will wipe the phone and install all standard apps
melorib said:
When I updated to MM the "same" happened, it didnt install the apps I had deleted or frozen with Titanium Backup. I guess if we choose refurbish instead it will wipe the phone and install all standard apps
Click to expand...
Click to collapse
LG Bridge installed some of the programs I removed. The Google crap. The phone/contacts was not reinstalled.
Also, LG Bridge has no choice between refurbish or upgrade. LGUP does, but it doesn't recognize my phone. Now if I could get it to, then I could fix it myself.
:laugh: I got LG Phone and LG Contacts back. I did a Factory Data Reset and I got those two critical apps back. Unfortunately, I am still on Marshmallow, that doesn't have root, yet.
I still can't access LGUP. (Yes, going through the whole uninstall - install routine)
Is there another method of rooting / flashing LGH962AT-00-V10b- . . . -ROOT besides LGUP?
*EDIT 1* LG Bridge will let me restore from a backup. *.lbf / *.idx / *.brinfo Does anyone have a a H962 rooted Lollipop file I can use?
*EDIT 2* If I Enable OEM unlock in Developer Settings and remove the battery for a minute. Replace battery and do not touch the power button. Hold the Volume Up button and attach the computer cable and boot into Download Mode. Then open LG Bridge and click on software update. When it says I'm up to date, start LGUP I get . . . Model Unknown / COM6. (I did't do a uninstall - install of LGUP)
I'm getting closer. Tomorrow I'll do a full uninstall - install routine of the LGUP. Maybe I'll get lucky.
Lord Sekhmet said:
:laugh: I got LG Phone and LG Contacts back. I did a Factory Data Reset and I got those two critical apps back. Unfortunately, I am still on Marshmallow, that doesn't have root, yet.
I still can't access LGUP. (Yes, going through the whole uninstall - install routine)
Is there another method of rooting / flashing LGH962AT-00-V10b- . . . -ROOT besides LGUP?
*EDIT* LG Bridge will let me restore from a backup. *.lbf / *.idx / *.brinfo Does anyone have a a H962 rooted Lollipop file I can use?
Click to expand...
Click to collapse
Well thats good you got it working. Sucks to be on mm tho.
MM is not bad, I dont miss root as much as I did before I had the LTE bands needed :good:
:laugh: :highfive: I got ROOT!!!! again.
For others here is what I did.
First, LGUP has an update. I downloaded it.
Linky-LGUPnew.zip Normal setup. Move the Common folder to the LGUP folder.
The Mobile Driver stayed the same.
I was on Marshmallow. But H962 doesn't have a rooted MM version. So I used my original rooted TOT. (LGH962AT-00-V10b . . . ) First I Chose UPGRADE in LGUP. I crashed my phone. I did it again but REFURBISH. I backed up everything via LG Bridge first. It worked! I got root, but I must restore my stuff.
LG Bridge did not restore anything for me. I stupidly forgot to also LG Backup via the phone app. It probably failed because I went from Marshmallow to Lollipop. It is worth it to me to BLOCK ALL %&^&#^% ADVERTISING.
DIE ADVERTISEMENTS DIE
So, I have no problem reinstalling everything from scratch. If you do, backup you backup's backup. I do have Titanium Backup of most of my apps/files. I "assume" they will work.
Now I have to patiently wait unit H962 has a rooted Marshmallow. Click thanks if this helped you.
Lord Sekhmet said:
There seems to be two problems. But fixing one will fix the other. So I'll go there first.
I can no longer get LGUP to recognize my phone. Fix this and I can reflash LGH962AT-ROOT and start over. My computer recognizes my phone and I can transfer files between them.
It is really hard to get into recovery, but I have through LGUP. My recent attempts shows the dead droid with the red triangle. I think I may have killed recovery and that may be why I can't use LGUP.
My phone otherwise mostly healthy. :good: I can't get Xposed to install and work. I had it working before my last reset. I accidentally killed my Contacts and Dialer. I can't Flashify/FlashFire LGContacts. 20/20 hindsight - I forgot to TB before messing with the Dialer/Contacts.
I am 100% willing to lose everything and start from scratch. If someone could help me get LGUP to work again I will be so grateful.
At least I didn't soft or hard brick it. . . . . . this time. (See my signature)
Click to expand...
Click to collapse
Does the LGH962AT use Tungkick's Rooting method?
If so, you could probably do an "Upgrade" while your phone is in Download Mode when rooting with the TOT file. That fixed a lot of issues I had on my phone and I didn't lose my important files, which by the way, I have to transfer to my SD Card.
RobertVanHagar said:
Does the LGH962AT use Tungkick's Rooting method?
If so, you could probably do an "Upgrade" while your phone is in Download Mode when rooting with the TOT file. That fixed a lot of issues I had on my phone and I didn't lose my important files, which by the way, I have to transfer to my SD Card.
Click to expand...
Click to collapse
First, I appreciate your reply . . . But . . . Tungkick uses LGUP, which my phone wouldn't connect to. The latest update to LGUP fixed that recognition problem that and I was able to fix my phone via LGUP.
I will see if I can change the title to SOLVED.
Lord Sekhmet said:
First, I appreciate your reply . . . But . . . Tungkick uses LGUP, which my phone wouldn't connect to. The latest update to LGUP fixed that recognition problem that and I was able to fix my phone via LGUP.
I will see if I can change the title to SOLVED.
Click to expand...
Click to collapse
Got it! Glad you were able to solve your issue.