Hi there,
I have a samsung galaxy s3 i9300 with broken display and I need to run a software to recover deleted files on the memory of the phone. This software requires to doo usb debugging to the phone in order to do its job. I was already able to enable it changing buold.prop using adb in recovery mode. Now the phone waits for the user to touch the "ok" button in order to allow the pc, unfurtunately my display is broken so I can't do it. Do you have any idea on how to let the phone accept adb/usb debugging connections from my pc, or to completely disable the confirmation box and accept the requests automatically?
Does your touch screen still register touch? If so, I'd try borrowing same model of phone from a friend, connecting it to computer to see where exactly is the OK button, then try to tap same location on the broken screen of your phone>
Related
hello there,
I'm using Galaxy S1 I9000, and my screen just got broken, and shows nothing now (black screen).
I have found this PC software that allows me to see my android device screen Via my computer.
Unfortunately my "USB debugging mode" wasn't turned on, so I am not able to use this software.
I'm able to get inside CWM mode, but I do not know how to enable this option .
so my question is, is there any way to enable usb debugging mode through CWM on the device and ADB on my computer??
I have tried to use the ADB software but when I enter: "adb devices" it shows no devices.
any solution to my problem without buying a new screen?
I used SLIMROM with JB, has CWM 6.
Thank you.
Hi,
I was wondering if anyone can help with my poorly phone?
My phone broke a couple of days ago and the screen is black and digitizer has broken therefore I’m unable to use it. I don’t think there is any point trying to get the screen fixed but it will cost as much as a new phone would. But what I would like to do is backup the data on my phone.
I have not got USB Debugging enabled and when I connect my phone to the PC, the drivers are installed and I see my phone as a portable media device but there are no files or drives to display the phones data through windows explorer! Please help!?
After some research on the internet I have downloaded [email protected] and ADB.exe but the phone is not recognised (I believe this is because USB Debugging is not enabled).
I then did some further investigation and managed to book my phone under fastboot in recovery mode and selected ADB mode, this connects to my PC and new driver is installed but I am now not sure how I can use this mode to backup my device? And enable USB debugging so I can use my phone on [email protected]
Anyone able to help?
Thanks
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Trenter87 said:
Hi,
I was wondering if anyone can help with my poorly phone?
My phone broke a couple of days ago and the screen is black and digitizer has broken therefore I’m unable to use it. I don’t think there is any point trying to get the screen fixed but it will cost as much as a new phone would. But what I would like to do is backup the data on my phone.
I have not got USB Debugging enabled and when I connect my phone to the PC, the drivers are installed and I see my phone as a portable media device but there are no files or drives to display the phones data through windows explorer! Please help!?
After some research on the internet I have downloaded [email protected] and ADB.exe but the phone is not recognised (I believe this is because USB Debugging is not enabled).
I then did some further investigation and managed to book my phone under fastboot in recovery mode and selected ADB mode, this connects to my PC and new driver is installed but I am now not sure how I can use this mode to backup my device? And enable USB debugging so I can use my phone on [email protected]
Anyone able to help?
Thanks
Click to expand...
Click to collapse
Same problem :crying:
Hello guys, first of all sorry for my bad english but i need your help. I have a big trouble, my phone fell to the ground and got broken display and touchscreen. I tried recovery my data but when i plug the phone with usb cable it loads in the pc but looks empty, i think because i have the pin number for the sim card (tried removed but it doesn't work ) and i have another for the android system but i can't insert the number for unlock the phone. I haven't samsung account, i haven't enabled the usb debug mode and i don't know how the hell get in my phone!! I have tons of picture to save in dat phone and any backup aviable. I don't wanta buy another display, is there another way to control this smartphone with my computer with broken display/touch, pin number and usb debug mode disabled? Pls help me boys!
Have a new screen fitted. If kies cant do it and you cant flash nothing your options are limited.
Sent from my HTC One M9 using Tapatalk
You can't access your data while the phone is locked because android blocks mtp... If all you want to do is access your internal storage, you can try flashing TWRP in Odin and then accessing your internal storage using mtp in TWRP.
Try the following:
boot into download mode with home+volume down+power, after some time press volume up to confirm download mode activation
flash TWRP via ODIN (dropbox#com/s/3ir2eqsx8ewgj8m/twrp-2.8.7.3-i9300.tar?dl=1 Link for twrp-2.8.7.3-i9300.tar)
after you notice successful flash in odin: prevent auto-reboot by long pressing power-button
reboot to recovery mode | with home+volume up+power
connect s3 with usb, MTP connection should be enabled by itself
tricky part is at point 4./5.
Fabri911 said:
Hello guys, first of all sorry for my bad english but i need your help. I have a big trouble, my phone fell to the ground and got broken display and touchscreen. I tried recovery my data but when i plug the phone with usb cable it loads in the pc but looks empty, i think because i have the pin number for the sim card (tried removed but it doesn't work ) and i have another for the android system but i can't insert the number for unlock the phone. I haven't samsung account, i haven't enabled the usb debug mode and i don't know how the hell get in my phone!! I have tons of picture to save in dat phone and any backup aviable. I don't wanta buy another display, is there another way to control this smartphone with my computer with broken display/touch, pin number and usb debug mode disabled? Pls help me boys!
Click to expand...
Click to collapse
I think the answer of your problem is to open your Google account.
Hi
Have honor 8 Pro. Screen broken and no display but phone is on only.
Need to take backup.
Adb don't show devices. Can't accept USB debugger
External display via type also don't work.
Mtp is not getting enabled when connect cable
@madroamer
I guess you'll not have any luck, this because USB mode ADB is basically the door to any Android device. Also take note that MTP only works if this USB mode got enabled on Android device.
madroamer said:
Hi
Adb don't show devices. Can't accept USB debugger
External display via type also don't work.
Mtp is not getting enabled when connect cable
Click to expand...
Click to collapse
If your bootloader is unlocked it might help, but this case smells like secure startup and I don't know if is it possible to bypass it by changing the boot, system, etc - whatever...
Used the USB-C to USB adapter from computer and connected a mouse to your phone. When the lock screen of your phone appeared, pit the code to unlock the screen. With this your will unlock the phone and turn on USB sharing.
Hello there,
Recently my Phone Screen died. I tried restarting it. Now i can only do 3 things.
1. Let it ring with smartthings
2. Use the Emergency call where it beeps
3. Restart the Phone with the Button combination
I am currently trying to get into recovery mode so I can backup my Data.
I have the most recent drivers installed. The Cable I use works with 3 different Phones.
I also tried a USB C to HDMI but had no luck. USB debugging is disabled.
ADB can enable USB debugging as far as i know.
Is there any aproach that i could try ?
a wireless mouse to enable adb and make the back up
Sorry, I should have specified that the screen is black.
What do you want to back up?