Hey guys.
I'm looking forward into buying a powerbank and I was wondering about the output power of it. I have an small tube like 2300 batterypack with 1Amp output. And when it comes to standy charging, you know when the phone is left to charge it's no problem.
The thing I'm worried about is charging while doing something like photos, working on photos, browsing the net, some socoal media maybe a game.
And my question is will 1Amp be enough for the G3 or I have to look for a 2Amp one?
If somebody had both outputs or can test it out It would be great because I wnated to buy it today and in Poland the differance between a 1Amp and 2Amp powerbank is like 2x.
A 2A powerbank charges my G3 quicker than an older 1A that I had. I got a 5v 2A charger with two USB ports and 6000 mAh capacity, and i haven't regretted it since! Although, Pokemon Go drains both my battery and the powerbank daily guess I'll have to find a powerbank with larger capacity
maximal input to charge a g3 is 5V DC 2A
1A is to low to play and charge at the same time. (Pokemon go is the best representative for the deplete akku while charging with a 1A powerbank ^^)
for a good quality for a powerbank is a anker powerbank but they are expensive but the best and qualitatives one
i have a 26800maH powerbank from anker with powercore+ and quickcharge 2.0 in continuous operation the bank can be used 28h with all 3 slots used after that time the bank is empty and need 8h to recharge
13 times can i charge my g3 with it from 0 to 100%
It's a sad story that G3 do not support QC2.0. The max charging rate is 10W. IF you are using a 1A output that would be 5W. thats almost half the speed. My suggestion is getting enough substitute battery and buy a charging dock or something. By doing so you could save the time sitting next to your plug n get rid of the experience of a burning iron pan.
Related
Does anyone know of a solar charger that will actually chearge the prime ? i have a freeloader solar charger with an internal 1200mAh battery that can ouput 5v 500mA and a Hymini Wind charger that has a 1200mAh internal storage that can output 5v 850mA
Both of these can alledgedly charge an Ipad but neither of mine seem to have the grunt to kick the charging circuit into life on either the tablet or the dock.
I just I want something that i can use to keep the unit topped off whilst i'm travelling around Greece
Before anyone says it, i understand the limitations of solar charge. from using it for my phone know they take many hours to charge their internal batteries and the loss associated with then dumping that charge into your device.
Not at 5v it won't
You'll need 15v to charge at normal rate, or 12v at a slower rate. 5v it will only charge completely off, and then only very slowly.
i take it that's just the tablet and not the dock ?
Harani said:
i take it that's just the tablet and not the dock ?
Click to expand...
Click to collapse
Either. The maximum input voltage for either is 15v.
ok cheers,
I thought it wasn't charging at all but i've read elsewhere that the charging light will not come on and that it will take up to 16 hours to fully charge on 5v
if that's true then if the solar charger is 1200mAh and is pushing out 500mA then it's only going to be able to charge the pad for just over 2 of the required 16 hours (i think ?) before it's depleted
I'll run some experiments and see exactly how much charge it will put into it overnight but it doesn't seem like it will be a practical thing to use.
Hi guys. i am going to buy this device(non dual) and i saw some comments about device's chargin speed. They say it charges very slow and it drains pretty quick. i wondered if i can use 2A charger to make it quick or does it use 2A or 1A charger? Cause i dont want to wait longer until it fulfills the battery. I got 2A charger from my old phone.
some 2A chargers charge faster but some don't ,i dont know why .the device come with 850mah charger that takes about 4 hours for full charge
I'm currently using a genuine Samsung Travel charger that gives out 2.1a fast charge output. I can fully charge my C5 Ultra in around 2 hours...
I saw a charger from sony that it is 2.1A but they say it damages the device. I know that it will possibly hurt battery life so does it worth it?
Hey, is it safe to use original 45W Samsung charger daily? Got it for nice price ($25) from friend's shop.
I read somewhere it's not recommend to use 45W. Also I read S20+ supports 25W only.
Thank you for answers.
It is safe to use the charger but I am not sure if it will be able to charge it at 25W also.
So if I will use 45W, charging will be the same as with original charger?
Tried it, remaining time to fully charged is showing the same with both chargers.
RenikSK said:
So if I will use 45W, charging will be the same as with original charger?
Tried it, remaining time to fully charged is showing the same with both chargers.
Click to expand...
Click to collapse
I have the 45w charger. Charging speed depends on the phone temperature. The phone slows down the charging when phone temperature gets high. It's marginally faster than the one that came with the phone. But it's super fast charging for the first 30 minutes or so compared to our of the box.
So i use the 45w charger at office when I need to charge the phone fast and seldom fully charge it as I would unplug it and go somewhere else.
At home I just plug in the charger that came with the phone for overnight charging. Perhaps not the best to leave it charging overnight but I need a full battery next day.
Even if the charger provides 45w, the phone will only pull what is needed from the charger itself. So if the phone limits itself to 25w, then thats all it will use from the charge available.
Equally, if the charge provided is lower than the maximum the phone can use (i.e. 25w phone but 15w charger), then it will use the maximum from the charge available.
Chargers these days offer a multitude of different voltages and amp ratings, but they are smart and will only send what is requested by the device that is plugged in so there's no chance of accidental over-voltage.
I too have the 45W samsung travel charger and did a comparison on power draw compared to the 25W charger that is included with the phone. I used both the USB C cable that came with the phone (Black) and the thicker cable that came with the 45W charger (White), while measuring the power draw using a power consumption meter that was plugged into the wall between the charger and the outlet. My phone was at 40% charge when I tested. The results are shocking.
Included 25W charger
Phone's Black cable - 27.9 W
Charger's White cable - 27.2 W
Samsung 45W travel charger
Phone's Black cable - 29.7 W
Charger's White cable - 31.3 W
The similar power draw explains the charging speed difference of 10 minutes which many reviewers on youtube have observed. Taking another step, I have read that the S20 Ultra requires the charger to support PPS to achieve (10V, 4.5A) in order to charge at 45W. So why does the 45W travel charger only support (15V, 3A), (20V, 2.25A), (3.3-11V, 4.05A), (3.3-16V, 2.8A) and (3.3-21V, 2.1A)? Even the best case scenario would be to use the (3.3-11V, 4.05A) PPS profile and set it to (10V, 4.05A) to give only 40.5W. I smell a rat.
Interesting. I have also measured power draw but my results are bit diferent.
45W charger was getting up to 41W for 4 mins.
On overall charging speed 0-100% the diference is 10mins, but after charging 20mins I'm getting 54% on 45W and 37% on stock.
17% in 20mins it's a lot of difference.
45W is slowing down up to 1A after that to cool down the phone. 25w have similar behaviour.
Baseus 65W PPS chargers triggers SFC 2.0 but it takes more than 2h to charge fully. Amperage is oscilating as hell.
my Huawei 65w laptop Charger charges my S20U much quicker than the 25w charger i find...
krogoth said:
Interesting. I have also measured power draw but my results are bit diferent.
45W charger was getting up to 41W for 4 mins.
On overall charging speed 0-100% the diference is 10mins, but after charging 20mins I'm getting 54% on 45W and 37% on stock.
17% in 20mins it's a lot of difference.
45W is slowing down up to 1A after that to cool down the phone. 25w have similar behaviour.
Baseus 65W PPS chargers triggers SFC 2.0 but it takes more than 2h to charge fully. Amperage is oscilating as hell.
Click to expand...
Click to collapse
I have been continuously testing and found that if your phone has less than 30% battery and the battery temperature is under 33 ºC, it will charge at 40W. After that, it drops to 30W for the remainder of the charge and then drop again to 20W when the battery is above 80%.
Next step is to find a good battery data logging app which logs battery percentage, battery temperature, charging current and time. Surprising to find that not many apps can do this. Even the Battery Charging Monitor app doesn't log all that data.
There are many charges out there and also many topics proves that Google Pixel 6 does not charge faster despite 30W fast chargers. I have two questions.
1. Can I go for anker 25w charger or 20w is sufficient. Also the third party chargers are good for battery health in long run.
2. My car charger I use currently for my Pixel 4 XL is 3amp. Again here, can I continue using it if it does not harm the battery health in a long run.
Posting the link below for anker 25w charger if it's good enough.
Amazon.com
I bought massive 65W ugreen charger so that i can also use it for my laptop. Btw cable from pixel 6 works also with the laptop so is good quality. Using that charger with 35% battery when charging started i see charging current of around 4300 mAh which at 5V means around 22W maximum consumption. Any charger of 20W or higher should work great if it supports power delivery of course.
You can use any USB-C Power Delivery and/or PPS charger. I'm not sure what the Pixel 6 max charging rate is, the phone should negotiate the fastest rate the charger can handle.
ibrahim52 said:
There are many charges out there and also many topics proves that Google Pixel 6 does not charge faster despite 30W fast chargers. I have two questions.
1. Can I go for anker 25w charger or 20w is sufficient. Also the third party chargers are good for battery health in long run.
2. My car charger I use currently for my Pixel 4 XL is 3amp. Again here, can I continue using it if it does not harm the battery health in a long run.
Posting the link below for anker 25w charger if it's good enough.
Amazon.com
Click to expand...
Click to collapse
I have the Anker Nano II 30W charger. It has all the PPS modes. Works great. According to FKM, a charge from 65-75% averaged around 27.7w. Haven't tested any further than that yet, though.
Actually I'm unable to get 30 w PPS chargers locally. So can I go with the below if it is safe for battery health and also does the job with intelligence of pps.
Belkin BoostCharge 25W Wall Chargers with PPS USB C Power Delivery
Amazon.com
I don't yet have a 45 watt charger, so I connected the 25 watt charger from my S20. It says it will take 2 hrs to charge from 15% to Full.
My S20 would charge a lot faster than that. Is this normal?
I guess.
pixel 18W charger is 2h20.
iphone 5w is 5h15
LG 10w near 3h
I might get a faster one, I have the 20W oneplus one, but it wont work on the samsung... dash charging tech not compatible
DUTCH Van Atlanta said:
I don't yet have a 45 watt charger, so I connected the 25 watt charger from my S20. It says it will take 2 hrs to charge from 15% to Full.
My S20 would charge a lot faster than that. Is this normal?
Click to expand...
Click to collapse
Not sure if the S20 charger uses PPS charging protocol that S23U "requires" but 2 hours for 85% sound fine if it's not charging at 25 watts.
JohnTheFarm3r said:
Not sure if the S20 charger uses PPS charging protocol that S23U "requires" but 2 hours for 85% sound fine if it's not charging at 25 watts.
Click to expand...
Click to collapse
Thanks. My S20 with that charger would charge 85% a whole lot faster than 2 hrs.
45 watt charger should arrive tomorrow. Hopefully, it will go faster.
DUTCH Van Atlanta said:
Thanks. My S20 with that charger would charge 85% a whole lot faster than 2 hrs.
45 watt charger should arrive tomorrow. Hopefully, it will go faster.
Click to expand...
Click to collapse
Yes, but as I mentioned, S23U requires PPS protocol to charge at the "advertised" speed. Just because the charger is 25W, it doesn't mean it will charge at 25W if it's missing the required protocol. Hence why I wrote I'm not sure if S20 supports the same PPS as S23U uses. In order to get 45W charging speed on S23U the charger needs to be PPS and the cable needs to be rated at least at 5 Amps.
JohnTheFarm3r said:
Yes, but as I mentioned, S23U requires PPS protocol to charge at the "advertised" speed. Just because the charger is 25W, it doesn't mean it will charge at 25W if it's missing the required protocol. Hence why I wrote I'm not sure if S20 supports the same PPS as S23U uses. In order to get 45W charging speed on S23U the charger needs to be PPS and the cable needs to be rated at least at 5 Amps.
Click to expand...
Click to collapse
That's what should be coming tomorrow from Amazon: Anker 313 charger and 543 cable.
Why Samsung doesn't include these with the S23 is a shame!
DUTCH Van Atlanta said:
That's what should be coming tomorrow from Amazon: Anker 313 charger and 543 cable.
Why Samsung doesn't include these with the S23 is a shame!
Click to expand...
Click to collapse
Well, some OEMs don't include a charger with their Flagships nowadays. Samsung isn't the only one.
That seems a little slow.
Make sure fast charging is on in settings. As you plug your charger in, it should say that it's Super Fast Charging
If it doesn't, try a different cable
If that doesn't work, go for a different charger
My phone keeps saying moisture detected, when there isn't, it's fked up, some chargers work, most dont
when you want to start charging your phone,make sure phone battery temperature is normal.
if you use continuously then charge it,charging speed is lower.
don't depend on status SFC or SFC 2.0.
you need watt meter cable or watt meter to know actually the real time charging speed.
if very hot,from 45 watt down to 15 watt charging (SFC 2.0)
if you want to charge from 10 to 100 in 1 hours use 45 watt charger,you need a cooler room temperature.
or you need a cooler at the back of the phone in 33 degree celcius room temperature.
if you wat to charge wireless 15 watt,it is the same.
battery temperature can make it slower charging.
status fast wireless charging is not the benchmark for charging speed.
SFC 2.0 is the same ,not the benchmark for charging speed.
you need a watt meter cable to know the real charging situation.
My S20 charger initially shows SFC as active when I plug it in but then it drops down to normal charging. Looks like I am not the only one with this issue so guess I will be buying a new brick.
Anyone got a good suggestion on which ones to get? In addition any good 12v car chargers that support it too?
noisy_lightning said:
My S20 charger initially shows SFC as active when I plug it in but then it drops down to normal charging. Looks like I am not the only one with this issue so guess I will be buying a new brick.
Anyone got a good suggestion on which ones to get? In addition any good 12v car chargers that support it too?
Click to expand...
Click to collapse
The Anker 313 charger and the Anker 543 cable work for me.
I've had old HTC and Motorola phones from years gone by that took ages to charge. When I got the opportunity and the cash to buy my Samsung, I made sure I got a charger and cable that could super fast charge. From less than 10% to 85% capacity in just a few minutes. Wow.