None custom ROM is working, G925W8 Canada, any idea guys? - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hello,
Tried all ROMS, none is working, below is the detail:
Installed
1 . CRISSCROSS ROM - no audio, while on call in earpiece and loudspeaker
2 . XtreStoLite-ROM-3.3.1-DPDP.zip ROM, Problem - AFter flash Phone model shows G925F AND NO CONNECTION TO NETWORK, EMERGENCY CALLS ALL TIME, TRIED flashing MODEM for g925w8 no LUCK
3. KIngfisher ROM, after flashing Kingfisher ROM, phone is STUCK AT
*KERNEL IS NOT SEANDROID ENFORCING* and phone will not turn ON.
SO , I guess there is NO working CUSTOM ROM fOR G925W8,canada. At the end I flashed stock BOJ7 AND Phone is working perfectly with 5 1 1 G925W8 BOJ7

---

I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though

---

KAwAtA said:
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
Click to expand...
Click to collapse
so why am I getting emergency calls?
1 can you tell me in detail that which steps did you follow?
2 what was your android version when you flashed rom?
3 what is your baseband verison now?
4 Was it rooted already?
5 Does this rom have spanish langauage? can you check for me?
Thank you

---

@Administr4tor
Custom ROMs for that work for W8
I've have confirmation from multiple users that my OZOP Rom is compatible and working flawlessly for the following devices Flat and Edge (rom is Edge based) F/I/T/W8. Could be more this are just the confirmed working devices.
Also OZOP is currently very active with development and actually about to be updated!
What ever Rom you decide is up to you.
Just letting you know there are options available.
Good luck

---

I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system

---

Nothing seems to work, No matter what I have No network connection... on any rom..

---

AndroTechGuy said:
Nothing seems to work, No matter what I have No network connection... on any rom..
Click to expand...
Click to collapse
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.

---

xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
I could have sworn I was running 6.0.1 stock, Maybe I wasn't, but alright I'll try to find the radio. thanks mate

---

christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
yes, I need updated call fix as the one I have is only for 5 1 1

---

Administr4tor said:
yes, I need updated call fix as the one I have is only for 5 1 1
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)

---

xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.

---

AndroTechGuy said:
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1

---

xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
I know how to do it, the phone is unlocked, so not sure what carrier I should be flashing on it. I legit just need it to be able to use the Network, currently have it custom rom'd but no network.

---

xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
So the best I've been able to do is get it on a custom rom with no network connection at all. Seems like Im losing the ability to get it working. I tried Wind, telus stock 6.0.1's and i get the SW rev error, I've tried Rogers 5.1.1, and I get the same. Only thing that flashed on my device was "AP_G925W8VLU2AOG2_CL4808800_QB5701859_REV02_user_low_ship.tar" but it didn't boot past Galaxy S6 Edge logo, and recovery wasn't loading to try and factory reset to continue boot. I'm pretty sure this phone is dead.... I mean the custom rom was 6.0.1 with arter kernel, but no service... I'm lost...

---

christopherrrg said:
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
Click to expand...
Click to collapse
Thanks Sir.

---

Any ideas to my posts above?

---

guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.

---

Just update stock system to Marshmallow 6.0.1 (or flash stock 6.0.1 via Odin), then flash TWRP, do standard wipe with TWRP (Data, Cache and Dalvik), flash XtreStoLite via TWRP and everything will work
I have canadian S6 Edge and XtreStoLite is working very good

---

cripez said:
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Click to expand...
Click to collapse
issue is I can't make the 6.0.1 stock files flash, always getting the SW rev error when cm.bin tries to flash, I've tried, Rogers, Wind, Telus stock files, nothing works. On CrissCross right now but not service... I want to get back to stock or at least make the bootloader work.
EDIT: Apparently using the most recent koodo stock, got me back to stock rom and with service! Now to root and do the custom rom properly! Thanks all!

---

christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
THIS G925W8 is working perfectly in 5 1 1 , I was able to make calls to all networks including GSM and WCDMA, I checked IMEI status with code 197328640 and IMIE status is OK, then after I flashed 6 0 1 and then the IMIE status turns to NOT GOOD and I am unable to make calls and stuck at EMERGENCY CALLS, looks like this PHONE IS JACKED??