sorry to jump a dead thread but im new here and dont know how to make a new one, i have a elephone p9000 and i believe ive soft bricked it, i have access to the battery, my computer doesn't detect it under driver manager (it detects an unknown device(i have the correct drivers installed)) the problem occurred when sp flashtools crashed halfway through flashing a new ROM (now the phone wont boot and is stuck on the white elephone logo and i cant get into recovery) really stuck any help is greatly appriciated
Related
Hello everyone,
So I tried to flash cwm 6.0.4.4 on my lg p760, but I did't saw what that zip was for LG 4x, flashing went successfully , but after reboot my phone won't start it reacts to nothing, no lg logo, no vibration. I would really appreciate any help to repair my phone
Sorry but you'll have to follow the unbrick guide here -
http://forum.xda-developers.com/showthread.php?t=2085344
Thank you for reply, but all these solutions are in download mode or recovery, but I can't access any of that the phone is just dead screen not showing anything, when I connect my phone to pc without battery windows is showing "usb device is not recognized" error and keeps it beeping just like I connect and disconnect my phone every second (I have usb drivers installed)
You need to follow this http://forum.xda-developers.com/showthread.php?t=2585161, mine had the same error and fixed in 10 min!
So i stupidly installed chainfire 3d restarting my phone to a boot loop, i tried doing a hard reset still it restarted back to boot loop , I tried flashing a stock rom/kdz for my phone into lg support tool/r&d test tool, but every time i put it into s/w upgrade mode my pc dosent recognize it, it just says Usb device Not recognize , it also says device driver software was not successful , and i did
try installing my phone driver from here (LG P769 Support: Find Manuals & Warranty Info | LG USA) but yet it still dosent recognize it. I think this is the only problem thats blocking my way to unbrick my phone. I don't know if I'm installing the wrong driver or my phone.
If you know the right driver for my phone can you please reply with the link, I would be appreciated for your help.
my phone is also locked boot loader.
sorry for my bad english
[HELP] Device(Alcatel Idol X+ 6043d) doesn't turn on after using SP Flash tools
Hello,
First of all I'd like to say that i almost have no idea about androids,i started "playing" and acting with them some weeks ago.So, I own a Alcatel One Touch Idol X+(6043d,16GB,Octa-core,Dual-sim,MTK MT6592) rooted and yesterday i was trying to use a custom recovery(TWRP) I found in the internet after much searching.I opened Flash tools, loaded the scatter file i created by mtk droid tools, clicked on recovery and found the image and then i pressed Download (Download only).After that an error popped like PMT changed and you have to download or something like that, so for some reason being stupid i tried another option called Format All + Download.I turned off my phone, connected it to the computer again and the downloading started.After a while it stopped and popped errors ( Am not sure of what it was, after some more searching probably it was enable dram failed or something like that) and till then when i disconnected the phone, it doesn't turn on not even in recovery mode like it's dead, it only shows the led battery charging when it's connected to pc.
Also when i connect it to the computer at first it just shows a MTK USB Port but then it just disconnects and randomly reconnects and this goes on.
After trying to fix it, I tried to download a stock ROM although am not sure if I managed to download the right one from needroms, but being a newbie I had problems like I am not sure how to flash a ROM(using flash tools,picking up the right files,downloading etc.) plus when I tried to load the scatter file it always said that it's invalid(I use the latest version of Flash tools).I also tried to install some vcom preloader drivers found as a solution in the internet but that doesn't help it just shows that they're not installed correctly.
I really need some help here about what to do, hope you'll help me.
Thanks
porting of stockrom thru spft
same experienced the phone in bootloop and dead
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
acer iconia a3 a20 error sp flash fix
fmarino09 said:
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
Click to expand...
Click to collapse
---------- Post added at 11:26 AM ---------- Previous post was at 11:21 AM ----------
fmarino09 said:
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
Click to expand...
Click to collapse
hy friend use this sp flash tools v5.1515.00
this link download https://doc-0c-bc-docs.googleuserco...046/*/0B7XGoy6u4PgeX3ByYUNyWlpjZmc?e=download
go in sp flash tools then select scatter file where you download the rom on directory then check all,pres download ,now pres vol down and connect the usb to computer and tablet still press vol down,see the mtk usb on bar sp flash tools ,relese vol down and wait ,red bar,purple bar,yellow bar, ok circle , done ,now disconect the tablet and press power ,or check if have logo charger reput usb to computer.100 % tets by me work
I have a similar problem, but no error message...it just seems the computer can't see the tablet. I tried my Windows 10 machine and an old Windows XP machine I have lying around. I've installed several versions of drivers, and nothing. I'm so frustrated right now. @paulktm I tried your file, but there's nothing there. I don't get any kind of error message, the Win10 machine just acts like it sees the tablet for a second, then doesn't anymore. The XP machine sees it, but fails to install any drivers for it...even when I manually install them, they don't seem to do any good.
I'm so frustrated right now!!!
This is an old thread but maybe some poor soul finds it like I did and manages to get his device back as well.
I've had a lot of trouble with an Acer Iconia A3 A20 FHD that was stuck at the first logo screen. Powered off and connected to the charger it only showed the battery logo with the flash but no animation any more. Booting into recovery (Pwr+VolDn) worked but mounting the system partition didn't work.
SP Flash always aborted with the dreaded "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)" / "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)" although cabling and drivers were perfectly all right. Obviously Acer patched the preloader in order to lock out SP Flash's download agent - that's customer support - thank you [email protected]#%&!!!
Solution: Power off, start SP Flash download/readback/whatever, press VolUp *and* VolDn simultaneously and plug in the usb cable. This way the download agent should be able to do it's job. I also plugged out the battery all the time and this seems to be necessary.
Flashing worked as it should and the tablet booted nicely and I didn't even loose my apps and data since I excluded the USRDATA partition from flashing.
Good luck!
Hi
same problem, tablet bricked after installing custom recovery and on boot loop
tried to unbrik with but SPF tools, com port is working but the firmware won't upload...
I waited for ages.. nothing...
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse