Setting>About phone>
Internal memory keep touching 5 times>
phone information 1 or 2>
Set perferred network LTE only
Then.....
Sim1 or Sim2 keeps in 4GLTE
Shortest guide ever!!
Sent from my Redmi Note 3 using Tapatalk
or just simply used *#*#4636#*#* code for that.
Related
OKay, I have now tried using my Tata Indicom CDMA sim (UIM) and the sim card works fine with the Phone.
I can make and recieve calls using the sim card. The only problem is, the Data won't work.
Things I have tried,
Keeping the APN blank,
Trying different APNs from Google results,
Copying the APN settings from my HTC one (which works with tata Indicom and data works fine)
I have also tried to check the hardware differences between the two phones and I found out that Redmi note 3 dsnt have ESN/MEID. And as per my knowledge, Tata Indicom uses MEID to authenticate data connection .
So is there any way to INSERT an MEID into the phone? Or trying some different ROM/Radio can be profitable for this subject?
P.S. I have read on different forums people claiming that their Relicance CDMA Sim data works fine.
Still no reply ?
I am also not able to get the data on Reliance CDMA. Plz help.
ImBridge said:
Still no reply ?
I am also not able to get the data on Reliance CDMA. Plz help.
Click to expand...
Click to collapse
Go to settings/about phone
Click on internal storage 5 Times
Choose Phone Info 1
Go down and choose cell type
GSM/CDMA(auto)
I hope it works
It doesn't work
But I noticed one thing -
When I go to About phone -> 5 taps on Internal Memory -> Phone Information (of the slot where CDMA SIM is inserted)
I see that IMEI is 00000000 and
Phone number is 19869372 . . . . . . (1986 is pre-fixed to the mobile number. So the Phone number becomes 14 digit long)
Is there something wrong ? Because when I look at the same information on the GSM SIM, the phone number is regular 10 digit long.
Just buy it another CDMA phone. Because this GSM supported phone I think ?
Sent from my Redmi Note 3 using Tapatalk
Redmi note 4 how to work cdma sim please me reply
How can I stop a rooted sprint note 3 from locking the sim. Im using this with an unlimited data sim card as just a tablet. It will work for 10 min at a time before it says sim card locked. A reboot brings it back. I know it's not a network issue as it will do it if I start the phone with airplane mode on and it locks right at the 10 min mark.
i installed havoc rom
after turn off lte and change network type to gsm only my network is crashed and sim 1 is dead
when disable sim 1 then sim 2 is ok and when enabled sim 1 then not working 2 sim cards and antenna left
i flash stock rom with fastboot and dont resolved this issue
after enable 2 simcards for 1 second see 2 simcards signal is full and then the antenna disappears.
how cn i fix or reset sim 1 socket data ?
how can i fix this issue?
thanks
I have purchased an Umidigi Power 3, I am having an interesting scenario and am interested in a technical answer as I can't seem to gleen anything from the research.
Using my Verizon sim in the phone is effortless. I have no problems making/receiving calls and/or data. As long as it is the solo sim, it will work in any of the two sim slots.
When I add a mint mobile sim (again at any slot), so long as the Verizon sim is the Mobile Data sim, Verizon works.
If I switch mobile data over to the MINT sim, the Verizon service doesn't even register to a network. It shows a 1x[FullBars]R in the status and any calls made on the Verizon service tells me that calls can not be completed as dialed. It's asked me to dial *611 which, if I do, just replays the same message. It does clearly state "Thanks for calling Verizon".
When I set the mobile network to Global, 1x, 3G, or LTE as well as the Roaming mode to "Home" nothing changes, only thing that does cause a change is if I set the roaming mode to "Home" and network type to "LTE". Then the bars never seem to register.
I've swapped the SIM to be safe, and this configuration works in my Oneplus 6t no problem.
Umidigi Power 3 seems to support all the bands, what could I be missing?
Thanks.
mastridonicus said:
I have purchased an Umidigi Power 3, I am having an interesting scenario and am interested in a technical answer as I can't seem to gleen anything from the research.
Using my Verizon sim in the phone is effortless. I have no problems making/receiving calls and/or data. As long as it is the solo sim, it will work in any of the two sim slots.
When I add a mint mobile sim (again at any slot), so long as the Verizon sim is the Mobile Data sim, Verizon works.
If I switch mobile data over to the MINT sim, the Verizon service doesn't even register to a network. It shows a 1x[FullBars]R in the status and any calls made on the Verizon service tells me that calls can not be completed as dialed. It's asked me to dial *611 which, if I do, just replays the same message. It does clearly state "Thanks for calling Verizon".
When I set the mobile network to Global, 1x, 3G, or LTE as well as the Roaming mode to "Home" nothing changes, only thing that does cause a change is if I set the roaming mode to "Home" and network type to "LTE". Then the bars never seem to register.
I've swapped the SIM to be safe, and this configuration works in my Oneplus 6t no problem.
Umidigi Power 3 seems to support all the bands, what could I be missing?
Thanks.
Click to expand...
Click to collapse
This is interesting. I think it's the apn not being set correctly. You might want to check if mint apn is set.
Also if you want to call mint, you'll need to switch calls to mint sim as well.
Sent from my SM-G985F using Tapatalk
Will look into it. Why do you think it could be the mint apn?
Did you ever resolve this? I had the same problem but with a FIDO data sim and a Shaw voice sim. All APN settings were correct but with the FIDO sim inserted I was unable to use the Shaw sim. Umidigi A7S
Few days back, i suddenly lost 4G and LTE on my Redmi Note 4 SD625. I have been using Airtel 4G sim for years but never had this problem. I am on stock MIUI 8.2.1 and not rooted.
I get only one IMEI number with *#06#. Is this normal?
Can sonebody help me with this issue? Thanks in advance