Guys, the phone went into brick mode simply while charging. Please help me with links or ideas on how to find / create a debricking .zip or folder to flash this Qualcomm Snapdragon 400 - 8930AB device.
Why would a service get use of my money when I know it is possible to reanimate this small evil by myself? People keep talking on russian forums about using tools like xPRG ... HEX/ MBN files... Miflash for Qualcomm... QPST software.. and stuff like this... but they are very general in explaning things... Help me!
Thanks!
Same problem here please help anyone
Mango Polo said:
Guys, the phone went into brick mode simply while charging. Please help me with links or ideas on how to find / create a debricking .zip or folder to flash this Qualcomm Snapdragon 400 - 8930AB device.
Why would a service get use of my money when I know it is possible to reanimate this small evil by myself? People keep talking on russian forums about using tools like xPRG ... HEX/ MBN files... Miflash for Qualcomm... QPST software.. and stuff like this... but they are very general in explaning things... Help me!
Thanks!
Click to expand...
Click to collapse
Take care
I hope this is not necroposting, but what do you mean for brick? Explain, is it hardware or software? And how is it going now?
L-K said:
I hope this is not necroposting, but what do you mean for brick? Explain, is it hardware or software? And how is it going now?
Click to expand...
Click to collapse
Necroposting at its finest, but i thought i would write here, so the thread creator might find something useful.
Here is my problem, samsung galaxy express 2 aka sm g3815, gone bricked while charging, i had custom recovery installed, although i do not seem to be able to remember the version, and root, flashed with Odin, everything worked perfectly for...almost a year, i guess. One day, my lil hero died. :crying: My computer seems to detect something plugged in, saying that it some QHUSB_DLOAD device. On some research I understood the Qualcomm reverted or switched to some sort of fail-safe state where it requires files to be written back in the device(correct me if im wrong). It`s been in deep coma for a few months now, everyone said "just buy a new phone and save yourself the hassle". Nope, my mind is set on repairing my hero. On other threads i found out it is possible to revive a phone in this state, using a class 10 or above microSD card and writing a debrick image. Problem was, i searched the seas of gold for the darn debrick image, none found. Until a few days ago, one of my workmates has a Galaxy Express 2, and said he can hand it to me so that i can copy what i need from it after the holidays. Both phones run on 4.4.2, his phone is all stock rom, no cwm or twrp, no root no nothing. It is coming in my hands in a few days. Does anyone have the patience to clearly write what must i do to get my hero working again? It`s been sucky here without it, currently stuck with a samsung Star 3 i reflashed myself, but that lil thing ain`t no Android. I have two class 10 microSD cards, one 8 Gb, one 16 Gb,with backup done, and i saw on other threads that i need to use the 8 gb one, since the phone`s internal was 8 gb. Anyway, sorry for the long novel, it`s my style tho, give as much info as you can so the people helping you know what they`re messing with haha feel free to ask for any extra information. If we ever meet, I`ll buy you a beer or two.....dozens
Cheers!
Related
i just bought a chinese htm xs5292 runnin 4.1.1 i want to root and upgrade to 4.3 any help on how to do this would be greatly appreciated, here are the specs
manufacturer - htm
model - x5292
android version - 4.1.1
kernel - x5292 dual core
software - mt5617-c913-en-vo5
hardware - c913-v1.02
i'm a first timer at this so please speak like you would to a child (even though i'm 35)
many thanks in advance
paul
paul0909 said:
i just bought a chinese htm xs5292 runnin 4.1.1 i want to root and upgrade to 4.3 any help on how to do this would be greatly appreciated, here are the specs
manufacturer - htm
model - x5292
android version - 4.1.1
kernel - x5292 dual core
software - mt5617-c913-en-vo5
hardware - c913-v1.02
i'm a first timer at this so please speak like you would to a child (even though i'm 35)
many thanks in advance
paul
Click to expand...
Click to collapse
I can help you get rooted. First you will need to install drivers on your PC so your device can communicate with the root program. Then try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7
If that dont work, let me know. You can always use MTK Droid Tools and SP flash tool to pull your stock recovery and port it into a custom recovery that will allow you to flash a simple root.zip
Hope this helps!
usb drivers
thanks Klown80, that looks like it should work, but first i need to install my usb drivers, i have loked at a ton of sites and they all didnt work, i need spreadtrum usb drivers, but can't figure out wich ones, a few said they all worked on any spreadtrum phone, but either im installing them incorrectly, or they simply didnt work,
again, thanks for any help in advance
paul
paul0909 said:
thanks Klown80, that looks like it should work, but first i need to install my usb drivers, i have loked at a ton of sites and they all didnt work, i need spreadtrum usb drivers, but can't figure out wich ones, a few said they all worked on any spreadtrum phone, but either im installing them incorrectly, or they simply didnt work,
again, thanks for any help in advance
paul
Click to expand...
Click to collapse
Try using this, it installs drivers for many different phones, it may not be the actual manufacturers drivers for your specific device but it will help get your phone talking to your PC:
http://www.snappea.com/
Also - Make sure you are going into settings and turning USB debugging on. You can usually find this under Settings > Developer Options.
snapea
Again, thanks Klown, but no joy, i tried serveral times and after 15 - 20 mins of "fobulating" (is that even a real word ) my phone it said "failed to processs phones data" i tried restarting both devices etc and a couple of other thing suggested but no joy.
Any other ideas, as always thanks in advance.
Paul
oh ps, i also tried to connect to snapea via wifi, but got the same message
paul0909 said:
Again, thanks Klown, but no joy, i tried serveral times and after 15 - 20 mins of "fobulating" (is that even a real word ) my phone it said "failed to processs phones data" i tried restarting both devices etc and a couple of other thing suggested but no joy.
Any other ideas, as always thanks in advance.
Paul
oh ps, i also tried to connect to snapea via wifi, but got the same message
Click to expand...
Click to collapse
Try these drivers
https://www.dropbox.com/sh/oaslz8xuxk7ag50/VRzHnZvA-b
finally
\it worked, can't thank you enough, one more bothersome question, now i have my phone rooted how do i safely, and i emphasise safely upgrade from 4.1.1 to 4.3
I have looked into it a bit myself, and am in half a mind to give it a go, but the warnings about bricking my phone always puts me off, so once again, thanks in advance for any help given, and many thanks for the help so far.
Paul
paul0909 said:
\it worked, can't thank you enough, one more bothersome question, now i have my phone rooted how do i safely, and i emphasise safely upgrade from 4.1.1 to 4.3
I have looked into it a bit myself, and am in half a mind to give it a go, but the warnings about bricking my phone always puts me off, so once again, thanks in advance for any help given, and many thanks for the help so far.
Paul
Click to expand...
Click to collapse
Go here and download MTK Droid Tools from first post:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
Run the program and connect your phone to PC, this tool will tell you lots of info about your phone but the main function is to possibly back up your stock firmware (This is good to have if you plan on trying to flash anything to the phone, this way you will have your stock files to fall back on in case something you flash to the phone does not work.) Once you have MTK Droid Tools running and phone connected, what does it say next to Hardware on the phone info tab please?
I am not sure off top of my head about updating to a higher version of Android but this back up step is REALLY important. It is hard if not impossible to find stock firmware floating around on the net for these chinese clone devices. IF you have stock files backed up you can flash almost anything you want knowing you have a way to restore your phone to working order. IF you look around here on XDA you will see tons of posts by people looking for the stock firmware for their clone phone after soft bricking it playing around. Sadly there is not much help for them unless they find someone with the EXACT same phone and are willing to share their back up (if the next person made one theirselves that is!)
hardware
Klown80 said:
Go here and download MTK Droid Tools from first post:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
Run the program and connect your phone to PC, this tool will tell you lots of info about your phone but the main function is to possibly back up your stock firmware (This is good to have if you plan on trying to flash anything to the phone, this way you will have your stock files to fall back on in case something you flash to the phone does not work.) Once you have MTK Droid Tools running and phone connected, what does it say next to Hardware on the phone info tab please?
I am not sure off top of my head about updating to a higher version of Android but this back up step is REALLY important. It is hard if not impossible to find stock firmware floating around on the net for these chinese clone devices. IF you have stock files backed up you can flash almost anything you want knowing you have a way to restore your phone to working order. IF you look around here on XDA you will see tons of posts by people looking for the stock firmware for their clone phone after soft bricking it playing around. Sadly there is not much help for them unless they find someone with the EXACT same phone and are willing to share their back up (if the next person made one theirselves that is!)
Click to expand...
Click to collapse
Thanks again, while i go to the link and follow the next steps i thought i'd put up the hardware version you asked for
hardware - c913-v1.02
Paul
edit
even though my pc now recognises the fact that tere is a spreadtrum phone in my devices list and i managed to root it ok, when i load up mtk droid tools it says "the device isn't revealed, connect or reconnect a cable"
needless to say i tried reconnecting and it didn't change i downloaded the adb drivers from the link under the mtk link but have no idea what to do with them,
appologies for my ignorance in all of this, but like i said in my first post, i have no idea what i'm doing with all this, thanks
paul
pps the hardware version i posted was from the info on my phone
well I have searched around and cant seem to find solution. I'm a newb that has been dealing with a former friend that flashed a custom build on my galaxy note e from Verizon. well it seems he can control and get my info from wherever he is. I bought a new computer seeing my others weren't equipped. the fact is I need to get my pad back. I had two previous accounts here one was paintmaster pro and the other masterhide. he somehow was able to make them un accessible to me. so is there a way to get my original os back? or just stop the remote access he has? PLEASE HELP I AM HAVING PHSYICAL SYMTOMS NOW DEALING WITH THE STRESS FROM THIS. the build # he used is LMY47x.T3773vvRU1AOL7 . I'm new but not stupid all I need is a little direction and advice. I bought flash drives one is 65gb on sale for17.99 at store plus new sd cards as he has something attached to them. I found Facebook katana and canary programs. I'm not tech savvy enough to just hook up to new computer and check only for the fact that I'm afraid he has something planted to get into my computer if he hasn't already.
There wouldn't be anything on the tablet that would be able to hijack your new computer, unless he works for the NSA.
You can follow the information found here http://droididea.com/update-verizon...6-0-t377vvru1bpd6-firmware-stock-marshmallow/ to update your tablet to the newest stock firmware. This will erase anything he would have done to it. You should also factory reset it as well. I suggest using the Odin method because if it's been modified, the OTA wouldn't work and Kies might not recognize.
ZTE Warp 7 N9519 for Boost - Any help to unbrick
I have ZTE Warp 7 N9519 for Boost, I try to root it by kingroot apk last verison. After successfully root this device, I restart it but no longer work, only boot with ZTE logo then black screen.
When I connect it to PC, it appears as (Qualcomm ZTE .....).
Please, Can any one help me to unbrick it.
Flash stock rom
google it
Thats weird because 90% of the people get the issue that they get temporary root then the phone reboots by itself and removes root. I never got a black screen when it finished rebooting. You may have a technical issue or you went to far and did something else.
Has anyone got twrp for this phone I can get temp root but can't find twrp to install when I have temp root
No, the only way to get perm root is to unlock bootloader but the phone doesn't seem to have one.
I think there might be a way I Can't get into recovery to fix it either. So got an idea from what was done on HTC desire 526 to unlock the bootloader but the bootloader option won't work for us but the part we need may work, Unless ZTE turned the feature off which I hope they didn't since since they screwed us on fastboot. So I'd like to try and make the phone boot completely from the ext. SD card. As I understand it's a less than known feature in case something happens to the Emmc. Also we would be able to have almost complete access to be able to change anything even flash custom roms without touching the internal memory . I realize it's not the same chip set as the HTC desire 526 is 8909 and our warp 7 is 8916. But still a Qualcomm and it's a good chance this is built into most Qualcomm based chip sets. As I understand it it can still work for our device and other Qualcomms. We just need someone kind enough to make a COMPLETE backup for us using dd commands. Then we can try and write that to an SD card to be an exact copy of the internal phone SD. but that may not work so we would have to use db boot tools but unless someone can give me a solid educated reason y it's a waste of time. I'm willing to put in the effort to try if I can get someone kind enough to post the complete copy. Would love to try this on my ZTE grand x3 too. So please anyone up to offer they're help with providing a complete image or constructive help would be awesome.
I think this device can only be temporary rooted. I know it is too old post but if you still need help, contact me. I have full qualcomm firmware for qfil (v07., v.09 and v10 (readed firmware))...
mbairaq said:
Admin Note: This is a special Q&A-formatted thread. Please follow this link to view it in your browser:
Click to expand...
Click to collapse
What lol
I am currently in communication with Alcatel's U.S. support (which may be outsourced, who knows?), and they have made it clear there is no OTU (OneTouchUpdate) available for the AT&T Alcatel Allura 5056O device. Their current advice is limited to performing a factory reset via the GUI, which of course isn't possible for a softbricked phone.
This means that as of this writing, there is no known way to restore this device from a softbrick.
I am explaining carefully the issue I and and a number of others here on XDA have experienced with this phone to Support, specifically asking for some method to reload the stock ROM, and will report any constructive suggestions they may have. But the OTU I made available at:
https://www.multcloud.com/share/0377ab37-15ed-4bcd-be3b-dbe8c7eb2cc8
...that lists the 5056 simply will not work on the 5056O.
Received this from the Contact Center:
The firmware is information that would only be available at the repair center. We would recommend you to perform a factory reset...
Click to expand...
Click to collapse
Still trying, but it isn't looking very good for those of us with softbricked 5056Os...
Yup I wanted to root the phone, so I did but then it bootlooped and it's bricked lol.
Haven't heard anything else from Alcatel's Customer "Support," so I've resent my questions to see if I can get some answers out of someone. There are enough of us affected by this issue that I'm not going to let them off quite so easily...
More bad news; the most recent reply from Alcatel CS:
At this moment it would be to send in the device into the repair center to get it repaired for you.
Click to expand...
Click to collapse
Clearly they are going to be less than helpful for those of us with the 5056O. Unless some kind soul here who has this phone is willing to image and post a copy of the Allura ROM, or someone knows a tech working for Alcatel who can supply the ROM, those of us with soft-bricked phones are completely screwed.
Am getting same info from Twitter CS...the ROM is only available inside their repair center.
(*sigh*) So unless someone else manages to liberate this device's ROM, guess we all might as well throw the devices in a drawer and move along. Just remember that the next time you're phone shopping, and bypass the Alcatel/TCL offerings.
Friends here I leave a link for you to download a copy I made to the Alcatel Allura 5056O, I did it through the flashfire application, I think if some advanced developer could work it, it would solve the problem we have. Https://mega.nz/#!01NDVR5K!rPPYEd87ndmg5Q9jmQ3qWjm1qGD3Rm7ge83yIsezSSQ
Excuse my bad English, I'm from Venezuela.
sanpuyon said:
Friends here I leave a link for you to download a copy I made to the Alcatel Allura 5056O
Click to expand...
Click to collapse
That is excellent, thank you very much!
Now let me make sure I understand; is this a copy of a softbricked ROM, or a functional one? Is it rooted or non-rooted?
CharlieSummers said:
That is excellent, thank you very much!
Now let me make sure I understand; is this a copy of a softbricked ROM, or a functional one? Is it rooted or non-rooted?
Click to expand...
Click to collapse
It is a copy of a functional rom, has root access and has modifications that I did before the device would damage me, but I have all my data in it.
sanpuyon said:
It is a copy of a functional rom, has root access and has modifications that I did before the device would damage me, but I have all my data in it.
Click to expand...
Click to collapse
So, if we can figure out how the Alcatel OTUs push the ROM to the phone, we might be able to get a softbricked phone to the point of performing a system reset...
Time to start reading up on how...
CharlieSummers said:
So, if we can figure out how the Alcatel OTUs push the ROM to the phone, we might be able to get a softbricked phone to the point of performing a system reset...
Time to start reading up on how...
Click to expand...
Click to collapse
The problem with my phone is that I made a modification to the build prop and upon restart I just showed the logo and then black screen, connect it to the adb and try to carry a custom recovery of a 6040A alcatel I had before and the result was that too Delete the recovery stock, now the phone when I connect it to adb appears to me as unauthorized, so I have not been able to repair it
sanpuyon said:
now the phone when I connect it to adb appears to me as unauthorized, so I have not been able to repair it
Click to expand...
Click to collapse
Keep trying. I've noticed that my 5056O does the same thing, but if I keep trying (restarting the phone, plugging in-and-out, etc.) I can eventually get adb devices to show it as "device" at which point I can acquire a shell, which can be SU'd.
Not guaranteeing this will work for you, but it has worked for me quite a few times so far. Beginning to think this phone is just magic, not science.
Just a quick bump to remind folks there are a bunch of soft-bricked 5056O phones out here in desperate search for a ROM...
Another bump to see if anyone has additional information on 5056O ROMs...hope springs eternal!
Still nothing, eh?
Hoping for someone with info on how to unbrick an Alcatel OneTouch Allura (5056O) - a stock ROM and means for recovery would be great!
Dear friends, after suffering for more than a year with my damaged phone, find a solution, I hope you can also solve it.
Here is a guide and the link to download the tool.
In the completely off phone will press the volume up and down keys at the same time and connect it to the pc so enter the download mode
1) Download the tool from this link https://mega.nz/#!NpkhnCoT!q5LxwJdWfIjcIY2tl99eGbhvRtrSY8bk-GQcDji7Rhs
2) Then unzip it install it on the pc
3) They execute it and they place the user and the password that he left in the attached note, when the update comes out they tell him not to
4) They look for the model of the team and they give to the option of flash and enjoy the magic
The only bad thing is that in the process the network release is lost
sanpuyon said:
Dear friends, after suffering for more than a year with my damaged phone, find a solution, I hope you can also solve it.
Click to expand...
Click to collapse
Um, last time I checked, the 5056O didn't have available ROMs outside AT&T. Is this the phone you repaired?
Also, latest version of SUGAR I found is v11.6.9R, which I placed in the MultCloud shared folder at https://www.multcloud.com/share/0377ab37-15ed-4bcd-be3b-dbe8c7eb2cc8 in the Misc folder. Same credentials as listed in the older README:
Region: All
Username: SU_IN.Panasonic
Password: KoD8naL2
Dongle authorization: unchecked
sanpuyon said:
The only bad thing is that in the process the network release is lost
Click to expand...
Click to collapse
My fault being unfamiliar with this stuff, but can you explain what was lost?
Oh, and I don't suppose this got you any closer to installing a custom recovery to root the phone?
does anyone have a link to the stock firmware? for an ALcatel onetouch Allura 5056O, I've been browsing the thread and seen none of the links provided for the stock firmware are all dead.
Better late than never: https://www.androidfilehost.com/?fid=10620683726822061932
I had hat on a HDD from a while back and never had a way to use it until I found edl. I'm currently flashing it now and I have no idea if it's gonna work or not. I don't think it will but who knows.
Also, its probably gonna take a few days or more to flash...
Edit: It failed at some point just a few hours in. Maybe it was just my device because I have disassembled it in the past looking for test points. I wish everyone else good luck.
My friends given me a S9+ clone with some major issues so I figured rooting or reflashing ROM would fix those, but every single ROM I tried doesn't work and just some up with and error shown in an attached image. Phones currently soft bricked and won't turn on. From what I learned this is a firmware compatibility issue but the problem is I cannot find one compatible with this clone. I managed to snap a picture while the phone was still running, revealing the firmware details. It would be very helpful If theres anyone who could provide me a link with a possibly compatible firmware.
Flippy485 said:
My friends given me a S9+ clone with some major issues so I figured rooting or reflashing ROM would fix those, but every single ROM I tried doesn't work and just some up with and error shown in an attached image. Phones currently soft bricked and won't turn on. From what I learned this is a firmware compatibility issue but the problem is I cannot find one compatible with this clone. I managed to snap a picture while the phone was still running, revealing the firmware details. It would be very helpful If theres anyone who could provide me a link with a possibly compatible firmware.
Click to expand...
Click to collapse
Unfortunately you're probably out of luck, the best you probably could have done is just use the phone as it was. I had something similar, it was an S7 edge clone, also running a mediatek processor. If you're lucky you might find a Chinese forum with some firmware on it.
Edit: where did you get the firmwares that you tried flashing?
YrrchSebor said:
Unfortunately you're probably out of luck, the best you probably could have done is just use the phone as it was. I had something similar, it was an S7 edge clone, also running a mediatek processor. If you're lucky you might find a Chinese forum with some firmware on it.
Edit: where did you get the firmwares that you tried flashing?
Click to expand...
Click to collapse
Believe me I didn't want to mess with the phone that much but you couldn't download anything on it, even from the play store and calls were broken too. So this was meant to be the last chance for this guy. I got the firmwares from general googling. Here's the list of few I tried:
MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8
MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
samsung s9+___MT6580__samsung__SM-G960F__dream2qltesq__7.0__alps-mp-m0.mp1-V2.34_hexing6580.we.m_P15
There's probably 3 more I tried and deleted.
Flippy485 said:
Believe me I didn't want to mess with the phone that much but you couldn't download anything on it, even from the play store and calls were broken too. So this was meant to be the last chance for this guy. I got the firmwares from general googling. Here's the list of few I tried:
MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8
MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
samsung s9+___MT6580__samsung__SM-G960F__dream2qltesq__7.0__alps-mp-m0.mp1-V2.34_hexing6580.we.m_P15
There's probably 3 more I tried and deleted.
Click to expand...
Click to collapse
I see, wow. Good job trying anyway. Do you think it could have been an issue with lacking the radio bands to work with your carrier?
YrrchSebor said:
I see, wow. Good job trying anyway. Do you think it could have been an issue with lacking the radio bands to work with your carrier?
Click to expand...
Click to collapse
Actually no. I could hear the other person, but from thier side they could only hear static noise. I tested microphones and they worked so who know's what's the issue.
So after a lot of suffering I actually got further and I can now download stuff to the phone. One firmware in particular can be flashed but the "userdata" partition cannot I just get the "not enough space" error. I'm no expert but this partition may contain some crucial config files. So when I boot the phone I only see vertical lines. Right now I'm trying to modify the android scatter file but I feel like a child while doing this.
Flippy485 said:
So after a lot of suffering I actually got further and I can now download stuff to the phone. One firmware in particular can be flashed but the "userdata" partition cannot I just get the "not enough space" error. I'm no expert but this partition may contain some crucial config files. So when I boot the phone I only see vertical lines. Right now I'm trying to modify the android scatter file but I feel like a child while doing this.
Click to expand...
Click to collapse
Way to go! What is that phone flash tool you're using?
YrrchSebor said:
Way to go! What is that phone flash tool you're using?
Click to expand...
Click to collapse
SP Flash Tool for MTK devices.
Hello. I read your topic about the software, fake samsung s9 + clone. I have a very similar situation. My friend's parents gave it to me to do something and I tried flashtool to upload the same software and now the phone is dead. The computer detects this phone ... Do you have any suggestions on what you could do?
I had same problem and fixed it Just change the proloder
If u don't have prooader I have 10 prooader files for s9+ clone diffrent models
Just change proloaer
Then windows should show mtk proader vcom driver on device manager
I will uploads files when I go to work
mosirezaei said:
If u don't have prooader I have 10 prooader files for s9+ clone diffrent models
Just change proloaer
Then windows should show mtk proader vcom driver on device manager
I will uploads files when I go to work
Click to expand...
Click to collapse
hello I need those preloader files to save the phone
I suffer the same, if I can get information about it, how did it work?
Same problem with my same model of S9+ Clone
Dear
I have same model of Samsung Clone S9+ and also have same problem. I flashed my phone with wrong firmware and my phone has only white screen. i changed an other firmware then it totally dead and dont turn ON then I use an other then there are some vertical lines. Can you help me??
Do you find correct firmware for your phone?
Thanks
I know this is not going to help get your phones going.. But serious, if you do not want to experience these types of issue.. By all means do not a clone phone.. If you can not afford the real deal. Then buy something within your budget, or save up until you can purchase it...
cic108 said:
Same problem with my same model of S9+ Clone
Dear
I have same model of Samsung Clone S9+ and also have same problem. I flashed my phone with wrong firmware and my phone has only white screen. i changed an other firmware then it totally dead and dont turn ON then I use an other then there are some vertical lines. Can you help me??
Do you find correct firmware for your phone?
Thanks
Click to expand...
Click to collapse
MT6580_S9+ - Google Drive
drive.google.com
more than 12 firmwares
Try searching on needrom but most likely it will be paid firmware, good luck
kirichen said:
MT6580_S9+ - Google Drive
drive.google.com
more than 12 firmwares
Click to expand...
Click to collapse
here is the proloader files i uploaded on Gdrive