So, some people here are having no luck with the fingerprint scanner on CM13 roms. Does anyone know if there's going to be a fix coming? What would be required for it to be fixed?
DAZTR411 said:
So, some people here are having no luck with the fingerprint scanner on CM13 roms. Does anyone know if there's going to be a fix coming? What would be required for it to be fixed?
Click to expand...
Click to collapse
People are busy tinkering with ROMs/Kernels. Add this, remove that. And it seems no one care about the new batch of XRN3Pro with different FP/LCD hardware.
Those people need helps... CC: @TheStrix @Umang96 @ktomov @banmeifyouwant @warmachine_28 etc...
Sent from my Xiaomi Redmi Note 3 using XDA Labs
I'll see if I can contact Goodix and Xiaomi and get the firmware required. If I were, what should I ask for?
MOVZX said:
People are busy tinkering with ROMs/Kernels. Add this, remove that. And it seems no one care about the new batch of XRN3Pro with different FP/LCD hardware.
Those people need helps... CC: @TheStrix @Umang96 @ktomov @banmeifyouwant @warmachine_28 etc...
Sent from my Xiaomi Redmi Note 3 using XDA Labs
---------- Post added at 01:45 PM ---------- Previous post was at 01:44 PM ----------
People are busy tinkering with ROMs/Kernels. Add this, remove that. And it seems no one care about the new batch of XRN3Pro with different FP/LCD hardware.
Those people need helps... CC: @TheStrix @Umang96 @ktomov @banmeifyouwant @warmachine_28 etc...
Sent from my Xiaomi Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
DAZTR411 said:
I'll see if I can contact Goodix and Xiaomi and get the firmware required. If I were, what should I ask for?
Click to expand...
Click to collapse
Ask for kernel source/driver + proper documentation.
Sent from my Xiaomi Redmi Note 3 using XDA Labs
MOVZX said:
People are busy tinkering with ROMs/Kernels. Add this, remove that. And it seems no one care about the new batch of XRN3Pro with different FP/LCD hardware.
Those people need helps... CC: @TheStrix @Umang96 @ktomov @banmeifyouwant @warmachine_28 etc...
Sent from my Xiaomi Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
Not that I don't care, but this is complete arseholenes out of Xiaomi. They've made one device with thousand different parts. Different camera sensors, different fingerprint sensors, different touchscreen digitizers, different batteries.
It's their job to update their kernel source with appropriate drivers and documentation. What will happen in two months time, when they decide that they can get even cheaper parts? Fiasco once again. Furthermore I can't and I wont do any experiments on devices that I don't poses.
DAZTR411 said:
So, some people here are having no luck with the fingerprint scanner on CM13 roms. Does anyone know if there's going to be a fix coming? What would be required for it to be fixed?
Click to expand...
Click to collapse
ktomov said:
Not that I don't care, but this is complete arseholenes out of Xiaomi. They've made one device with thousand different parts. Different camera sensors, different fingerprint sensors, different touchscreen digitizers, different batteries.
It's their job to update their kernel source with appropriate drivers and documentation. What will happen in two months time, when they decide that they can get even cheaper parts? Fiasco once again. Furthermore I can't and I wont do any experiments on devices that I don't poses.
Click to expand...
Click to collapse
@DAZTR411 For that reason mate, there is still no clues for those XRN3Pro phones with new hardware since the kernel source Xiaomi gave to us is INCOMPLETE.
Luckily I have FPC on my phone.
It's kinda bad that xiaomi did this. Even though they gave us an incomplete source, they changed some hardware and didn't even update. Bad move, btw I am one of the goodix fp owner and that's the only different piece on my RN3P. (thank god)
It would be good if any dev tried to test with these different hardwares..
Well the phone continues to be a beast with or without fp, no regrets.
And thanks for the custom kernels ????
Is there any way to know what fp sensor I have on my device?
Hubaqu said:
It's kinda bad that xiaomi did this. Even though they gave us an incomplete source, they changed some hardware and didn't even update. Bad move, btw I am one of the goodix fp owner and that's the only different piece on my RN3P. (thank god)
It would be good if any dev tried to test with these different hardwares..
Well the phone continues to be a beast with or without fp, no regrets.
And thanks for the custom kernels ????
Click to expand...
Click to collapse
What other different components are there and what do they effect?
DAZTR411 said:
What other different components are there and what do they effect?
Click to expand...
Click to collapse
Fp, Touchscreen display and battery.
For some, me included, the fp doesn't appear in the settings. The touchscreen dt2w doesn't work in atmel one only on focaltech. And for the battery some report the battery stats get stuck at 50% or - 2%.
Hubaqu said:
Fp, Touchscreen display and battery.
For some, me included, the fp doesn't appear in the settings. The touchscreen dt2w doesn't work in atmel one only on focaltech. And for the battery some report the battery stats get stuck at 50% or - 2%.
Click to expand...
Click to collapse
Oh hey, I have the battery problem too (which I fixed thankfully), really wish I knew about this stuff, not like you can really test for it before you buy I guess.
DAZTR411 said:
Oh hey, I have the battery problem too (which I fixed thankfully), really wish I knew about this stuff, not like you can really test for it before you buy I guess.
Click to expand...
Click to collapse
Can I ask what you did to fix it? So far the only solutions I've found are to use Mokee or an older build of RR.
I just got a new RMN3P to replace my one with a broken screen and it has the goodix, I didn't even know it existed until now. The only rom I can get it working with is the very latest Global developer from a couple of days ago.
Can I swap the motherboard from my broken screen one to the new one? I'm really loving RR on my broken screen one and would love to get it going on the new one with fingerprint.
How to know the goodix fp is used in RN3SD
GNVM said:
How to know the goodix fp is used in RN3SD
Click to expand...
Click to collapse
Go to /data/ folder, if you see a folder called "goofix"...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado de meu Redmi Note 3 usando Tapatalk
In build.prop the persist.sys.fp.goodix=0
does that means goodix fp is not used?
felipegcoutinho said:
Go to /data/ folder, if you see a folder called "goofix"...
Enviado de meu Redmi Note 3 usando Tapatalk
Click to expand...
Click to collapse
In build.prop the persist.sys.fp.goodix=0
does that means goodix fp is not used?
Can you please tell, that if I've goodix, will i be able to make use of Finger Print sensor with cm13?
---------- Post added at 09:54 AM ---------- Previous post was at 09:54 AM ----------
felipegcoutinho said:
Go to /data/ folder, if you see a folder called "goofix"...
Enviado de meu Redmi Note 3 usando Tapatalk
Click to expand...
Click to collapse
Can you please tell, that if I've goodix, will i be able to make use of Finger Print sensor with cm13?
geekychandu said:
Can you please tell, that if I've goodix, will i be able to make use of Finger Print sensor with cm13?
---------- Post added at 09:54 AM ---------- Previous post was at 09:54 AM ----------
Can you please tell, that if I've goodix, will i be able to make use of Finger Print sensor with cm13?
Click to expand...
Click to collapse
With a patch, yes.
felipegcoutinho said:
With a patch, yes.
Click to expand...
Click to collapse
What is that patch?? Name please??
Related
Just wondering how many people actually use the fingerprint sensor on a daily basis...
I used it occasionally before I was unlocked and s-off, but since that happened, I dont care to bother getting it to work again, since, IMO, it was placed in a bad spot, and I always ended up smearing my camera lens when trying to use it. HTC should either move it or dump it, but thats food for another thread..
Post your feelings about it here!
I am using fingerprint in a daily basis.
I simply register 3 fingers, all of them to unlock screen.
When swiping those fingers (while registering), i place my palm 'not' inline vertically to the phone.
My palm is in casual position. Just like when casually holding the phone, which of fingers that are casually touch the scanner.
For me I swipe them a bit diagonally.
Once registered, It works flawlessly be it when phone in vertical or horizontal position.
Be it you swipe it upward or downward or even a bit right/left ward.
Sent from my HTC One max using xda app-developers app
I use to use it all the time however the fact the hardware is not used beyond the Security screen bothers me. I.E. password/Fingerprint authorizations change authorizations. It should be programmed to work outside of the security screen lock. I.E. buy something on Play Store it ask for a password you swipe. Like Apple did with touch ID.
I don't use it as I don't really like the position and the usability a lot. On my old phone, Atrix 4G I used it only in the beginning as well, never really had a need for it.
Sent from my HTC One max using Tapatalk
Use it everyhour.. thats my method of unlock.. quite better than typing a pin for me.
yes! I even removed my corporate exchange account in order to gain access to the scanner. part of the rules in using company exchange is they disable all of those options.
the chicks dig it too!!!! :highfive:
I love to use the Fingerprint. But i really don't like the position and when Finger lock security active. It alway disable the lockscreen pulldown nofitication. So.. .i disable this. Sadly
Wait... This thing has a fingerprint sensor???
Jiggity Janx said:
Wait... This thing has a fingerprint sensor???
Click to expand...
Click to collapse
Yes, yes, it has. Though quite a few people say it's not working that well.
Yea, I was using before unlock and root and thinking about stocking phone back up - not much support for this phone
what kind of support are you looking for that you cant find?
I was gonna say eho actually uses it and does it really protect your phone or is it a waste of space and a worthless feature
Sent from my Sprint Galaxy s3 , powered by Zerolemon 7000
i.love.my.galaxy said:
I was gonna say eho actually uses it and does it really protect your phone or is it a waste of space and a worthless feature
Sent from my Sprint Galaxy s3 , powered by Zerolemon 7000
Click to expand...
Click to collapse
come on guys, don't take it too hard... its just a very small component.
Thought of posting a pic of the sensor here .. lol..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
371 views but only 10 votes...
even so, looks like most folks don't use it for one reason or the other..
for me, if it was somewhere else, and actually could be used for some real security, I might be more inclined to use it, but, for what it is now, I see no need to bother with it..
wase4711 said:
371 views but only 10 votes...
even so, looks like most folks don't use it for one reason or the other..
for me, if it was somewhere else, and actually could be used for some real security, I might be more inclined to use it, but, for what it is now, I see no need to bother with it..
Click to expand...
Click to collapse
Lets hope the next phones of HTC put it at a better place...
---------- Post added at 10:11 PM ---------- Previous post was at 10:09 PM ----------
But what better place do you think would be possible? i am wondering how a phone which does not have a physical home button can use a sensor in the front?!
Looking at poll, most of the population not using the fingerprint sensor, i am guessing it is going to be acceptable if the devs port ROM's from the One to the MAX without the fingerprint sensor and i am sure that will be easy and could be achieved by a beginner dev
that would be fantastic; there are so many great roms for the one, and I agree, 95% of us could care less about a functional fingerprint sensor, if we could have several more roms to choose from..
Had no clue this has a poll. Must not be viewable mobile which likely most of us viewing this forum are.
wase4711 said:
that would be fantastic; there are so many great roms for the one, and I agree, 95% of us could care less about a functional fingerprint sensor, if we could have several more roms to choose from..
Click to expand...
Click to collapse
Jiggity Janx said:
Had no clue this has a poll. Must not be viewable mobile which likely most of us viewing this forum are.
Click to expand...
Click to collapse
@wase4711 you need to make a separate thread or change the thread title lol
pradeepvizz said:
@wase4711 you need to make a separate thread or change the thread title lol
Click to expand...
Click to collapse
changed the title; thanks for the suggestion!:good:
[SIZE=+3]Welcome to
Questions Answers & Troubleshooting[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[SIZE=+2]This thread has been created to assist owners of the Sony Xperia Z4 Tablet[/SIZE]
There are no questions that are deemed insignificant
Helpful information for your device:
Sony Xperia Tablet Z4
ᴥ Please feel free to Ask Away anything about your device ᴥ
What's the best way to clean the smudges off the matte back of the tablet? I tried using water but doesn't really do the job. Any good suggestions?
GarySan said:
What's the best way to clean the smudges off the matte back of the tablet? I tried using water but doesn't really do the job. Any good suggestions?
Click to expand...
Click to collapse
I use the same spray I use to clean my eyeglasses. Does not leave streaks. http://www.amazon.com/gp/product/B000W8OZE2
bump
Sent from my KFFOWI using Tapatalk
All right.
Rooters:
do FxP's AOSP builds support USB-OTG? The reason I ask is that Sony changed this in their official ROM by having to search for USB devices via a (Quick) Settings entry, because the port cannot be powered due tot the water resistance.
do FxP's AOSP builds have support for changing the display's white balance? This is also a custom Sony thing.
do Sony's ROMs running on an unlocked Z4T still have support for changing the display's white balance?
jelbo said:
All right.
Rooters:
do FxP's AOSP builds support USB-OTG? The reason I ask is that Sony changed this in their official ROM by having to search for USB devices via a (Quick) Settings entry, because the port cannot be powered due tot the water resistance.
do FxP's AOSP builds have support for changing the display's white balance? This is also a custom Sony thing.
do Sony's ROMs running on an unlocked Z4T still have support for changing the display's white balance?
Click to expand...
Click to collapse
1. No.. the port seems to always be off
2. No
3. No
A few other annoying things are that NFC and gyroscope, accelerometer and such (screen rotation) don't seem to work for me at least (after 4 reflashes it's the same) and there is no recovery as far as I know for it (the androplus one didn't work)... But hey USB and WiFi tethering/hotspot works! :laugh: (doesn't seem to be a option on the stock WiFi only firmware)
---------- Post added at 04:56 PM ---------- Previous post was at 04:50 PM ----------
And a question by me in case someone knows of it... Is there a way to get custom recovery on AOSP ROM?
I'm expecting a answer to be no but it can't hurt to ask
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
Oops 3. You said Sony ROMs.... Don't know about that... But the aosp one can't
ml11ML said:
1. No.. the port seems to always be off
2. No
3. Don't know
A few other annoying things are that NFC and gyroscope, accelerometer and such (screen rotation) don't seem to work for me at least (after 4 reflashes it's the same) and there is no recovery as far as I know for it (the androplus one didn't work)... But hey USB and WiFi tethering/hotspot works! :laugh: (doesn't seem to be a option on the stock WiFi only firmware)
Click to expand...
Click to collapse
Oh my. So on AOSP I don't have NFC, gyroscope, accelerometer, USB-OTG and white balance controls? Can anyone confirm?
I'm on the verge of unlocking the bootloader to run AOSP, but if this is the case with the current builds, that are based on the only Sony sources, I'm really let down. It's practically unusable.
jelbo said:
Oh my. So on AOSP I don't have NFC, gyroscope, accelerometer, USB-OTG and white balance controls? Can anyone confirm?
I'm on the verge of unlocking the bootloader to run AOSP, but if this is the case with the current builds, that are based on the only Sony sources, I'm really let down. It's practically unusable.
Click to expand...
Click to collapse
Well thats what i have seen so far on my device... AOSP is pretty useless for anything but using the 810 as a nice hand warmer Going to flash back the stock FW on my unlocked bootloader and see if the white balance still works
---------- Post added at 05:57 PM ---------- Previous post was at 05:26 PM ----------
ml11ML said:
Well thats what i have seen so far on my device... AOSP is pretty useless for anything but using the 810 as a nice hand warmer Going to flash back the stock FW on my unlocked bootloader and see if the white balance still works
Click to expand...
Click to collapse
white balance works www . dropbox . com/s/knt1i34317o6e30/Screenshot_2015-10-07-10-11-18.png?dl=0 (remove spaces in link)
pic of the menu open it doesnt look nearly as much diffrent on the screenshot as it does in person when you move the sliders so i say it works
Is there a way to fully Deodex the stock ROM?
How to network unlock SGP771
Hi everyone and sorry for linking below, at the time I posted in the link below I didnt know that this was the official thread.
My question here
http://forum.xda-developers.com/showpost.php?p=65161731&postcount=8
Thanks for reading and answers in advance
Does the unlocked LTE version support both voice and data on AT&T network? If so, which model is best to get?
In my stumblings through google I found this - https://www.google.com.au/url?sa=t&...Ngtuq-bHVKDh9IMHmsjqQg&bvm=bv.127178174,d.bGs
It promises root for the Axon 7 but I haven't had time to try it yet.
If you are brave enough to try & it's successful would be good to know....
Given that ZTE have suggested that they will provide the ability to unlock the boot-loader at some point after release and that the link you direct people to at sadroid.com (why the link obfuscation by the way?) looks fishy enough to make the dodgy customers at kingroot/kingoroot look like fine upstanding members of the community, I'd advise that people not touch this with a forty foot barge pole.
fake, just look at the "screenshots"
Nameless One said:
Given that ZTE have suggested that they will provide the ability to unlock the boot-loader at some point after release and that the link you direct people to at sadroid.com (why the link obfuscation by the way?) looks fishy enough to make the dodgy customers at kingroot/kingoroot look like fine upstanding members of the community, I'd advise that people not touch this with a forty foot barge pole.
Click to expand...
Click to collapse
Copied link from google, sorry if it looked like I was trying to obfuscate the link...
Tried it out but the poot.apk doesn't install, comes up with a parsing file error...
Nameless One said:
Given that ZTE have suggested that they will provide the ability to unlock the boot-loader at some point after release and that the link you direct people to at sadroid.com (why the link obfuscation by the way?) looks fishy enough to make the dodgy customers at kingroot/kingoroot look like fine upstanding members of the community, I'd advise that people not touch this with a forty foot barge pole.
Click to expand...
Click to collapse
Did someone from ZTE actually confirm this or was it just one of their community members?
aPexalpha said:
Did someone from ZTE actually confirm this or was it just one of their community members?
Click to expand...
Click to collapse
Confirm what? If you're asking about the bootloader, they said they are in talks with R&D about how to best do it, and that it's a more a question of "when" than "if". Of course, all details are unknown.
aPexalpha said:
Did someone from ZTE actually confirm this or was it just one of their community members?
Click to expand...
Click to collapse
I think that it came up briefly during the last webinar, they mentioned the large amount of support on the forums for an unlockable boot-loader and said that while it wouldn't be unlockable at release that the ability to unlock it at some stage was more "when" than "if". If they keep to the monthly update schedule they indicated that they would like to maintain then a month or two after release seems most likely.
ultramag69 said:
In my stumblings through google I found this - https://www.google.com.au/url?sa=t&...Ngtuq-bHVKDh9IMHmsjqQg&bvm=bv.127178174,d.bGs
It promises root for the Axon 7 but I haven't had time to try it yet.
If you are brave enough to try & it's successful would be good to know....
Click to expand...
Click to collapse
Does the screen shot look like its from a Axon 7 phone?
max1001 said:
Does the screen shot look like its from a Axon 7 phone?
Click to expand...
Click to collapse
That's not an axon 7 screenshot. Don't trust that link!! Here's an screenshot with my nova set up. Look at the status bar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ZTE A2017U using Tapatalk
Exactly my point. Can't believe OP is this naive.
I'll be getting one of these guys next week, `fastboot oem unlock` should be enough?
(dylanger) said:
I'll be getting one of these guys next week, `fastboot oem unlock` should be enough?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67343722&postcount=132
http://forum.xda-developers.com/showpost.php?p=67344748&postcount=136
https://community.zteusa.com/thread/11067
https://community.zteusa.com/thread/1546
https://community.zteusa.com/polls/1188
https://community.zteusa.com/polls/1325
https://community.zteusa.com/thread/11163
https://community.zteusa.com/thread/11200
https://community.zteusa.com/thread/11183
You're quite welcome to try
Nameless One said:
http://forum.xda-developers.com/showpost.php?p=67343722&postcount=132
http://forum.xda-developers.com/showpost.php?p=67344748&postcount=136
https://community.zteusa.com/thread/11067
https://community.zteusa.com/thread/1546
https://community.zteusa.com/polls/1188
https://community.zteusa.com/polls/1325
https://community.zteusa.com/thread/11163
https://community.zteusa.com/thread/11200
https://community.zteusa.com/thread/11183
You're quite welcome to try
Click to expand...
Click to collapse
Very keen to rip open ABOOT/Little Kernel, does anyone have the firmware? I can't see anything under 'Support'
(dylanger) said:
Very keen to rip open ABOOT/Little Kernel, does anyone have the firmware? I can't see anything under 'Support'
Click to expand...
Click to collapse
http://www.myzte.cn/resource.php?mod=category&catid=196&netid=0&softid=0
Last three versions for the Chinese version of the phone, the leftmost blue button is to download the full image (middle is update)
you will need to sign up to the site in order to download anything.
Nameless One said:
http://www.myzte.cn/resource.php?mod=category&catid=196&netid=0&softid=0
Last three versions for the Chinese version of the phone, the leftmost blue button is to download the full image (middle is update)
you will need to sign up to the site in order to download anything.
Click to expand...
Click to collapse
Wholy ****, pan is the worst thing I've ever had to deal with 'curl: (18) transfer closed with 2503068826 bytes remaining to read' do you have a copy on you? I'm only interested in emmc_appsboot.mbn
---------- Post added at 01:04 PM ---------- Previous post was at 01:02 PM ----------
(dylanger) said:
Wholy ****, pan is the worst thing I've ever had to deal with 'curl: (18) transfer closed with 2503068826 bytes remaining to read' do you have a copy on you? I'm only interested in emmc_appsboot.mbn
Click to expand...
Click to collapse
Actually don't worry, I found a direct download
osmosizzz said:
That's not an axon 7 screenshot. Don't trust that link!! Here's an screenshot with my nova set up. Look at the status bar.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Off topic here, but what icons are you using? Those look really nice!
I still don't know why we can't get untethered twrp?
The Asus zenfone did this, it just booted into twrp and you could root your device... You couldn't install custom roms or keep twrp for any longer than when you rebooted but it did indeed allow us to root the Zenfone 2 (ZE551ML) pretty neatly.
No bootloader unlock required...
ultramag69 said:
I still don't know why we can't get untethered twrp?
Click to expand...
Click to collapse
Can you please provide it to us?
XblackdemonX said:
Can you please provide it to us?
Click to expand...
Click to collapse
You can download from the Zenfone forums - http://forum.xda-developers.com/zenfone2/development/alpha-tethered-twrp-asus-zenfone-2-t3123532
However I don't know if it will brick the Axon 7 as it was made for the zenfone 2 and that may be different to the Axon 7 with partition setups and so on...
Not willing to try with my phone as I need it working when I want to call someone, not when I want to keep a piece of paper from blowing off my desk ...
Nameless One said:
http://www.myzte.cn/resource.php?mod=category&catid=196&netid=0&softid=0
Last three versions for the Chinese version of the phone, the leftmost blue button is to download the full image (middle is update)
you will need to sign up to the site in order to download anything.
Click to expand...
Click to collapse
If you click the third button and go to the forum post about the update, you can just get the direct Baidu link without having to login.
Slim Roms has released a their rom for the G4.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://slimroms.org/#/device/athene
Know issues:
(known xt1625 issues)
Most sensors inop causing lack of GPS positioning, screen rotation etc.
Works great on verizon but flashing xposed causes a bootloop
---------- Post added at 05:34 PM ---------- Previous post was at 05:33 PM ----------
^^that's on last week's update from 11/11
hooks024 said:
Works great on verizon but flashing xposed causes a bootloop
---------- Post added at 05:34 PM ---------- Previous post was at 05:33 PM ----------
^^that's on last week's update from 11/11
Click to expand...
Click to collapse
What model of G4 do you have?
MadGoat said:
What model of G4 do you have?
Click to expand...
Click to collapse
Xt1625
hooks024 said:
Works great on verizon but flashing xposed causes a bootloop
---------- Post added at 05:34 PM ---------- Previous post was at 05:33 PM ----------
^^that's on last week's update from 11/11
Click to expand...
Click to collapse
hooks024 said:
Xt1625
Click to expand...
Click to collapse
Awesome, thank you. Are you daily driving this rom? What are your impressions?
MadGoat said:
Awesome, thank you. Are you daily driving this rom? What are your impressions?
Click to expand...
Click to collapse
Only been using it since yesterday, but everything seems to be working fine. I'm sure I'll encounter some bugs, but it appears they release updates on Fridays, and the current one is from last week, so I assume there'll be another one available in the next few hours.
6.0.1.build.1.12
Everything working good on 1625 with t-mobile except for rotation. Its seems auto-rotate is inop.
Looking into it further, it looks like more sensors are inop:
I just tried using the Android auto app for navigation, and it wouldn't give me voice navigation. The directions were correct though. I also tried just Google maps with the same problem. Next time I go out I'll try waze and see how that goes.
If you're OK with an unofficial version there is a slim6 build in the g4+ forums that works great on the xt1625
Flashing this week's build now. @MadGoat- how did you get to that sensor screen? I couldn't find it.
hooks024 said:
Flashing this week's build now. @MadGoat- how did you get to that sensor screen? I couldn't find it.
Click to expand...
Click to collapse
That is actually the diag sensor screen in the app "GPS status and toolbox".
Let me know if your sensors are inop when you install. I found it odd myself and feel that maybe it could have been a bad flash maybe?
1.13 build doesnt show any device changes for athene, but I will test it today and report back.
:good:
MadGoat said:
That is actually the diag sensor screen in the app "GPS status and toolbox".
Let me know if your sensors are inop when you install. I found it odd myself and feel that maybe it could have been a bad flash maybe?
:good:
Click to expand...
Click to collapse
Sensors were still not working. I flashed AOKP 7.1 rom from the G4 plus page. It's pretty smooth, and really quick. Worth giving up xposed for a few weeks until the nouget release.
You could always use one of the marshmallow ROMs in the g4+ forums if xposed is a must
[Deleted]
hooks024 said:
Sensors were still not working. I flashed AOKP 7.1 rom from the G4 plus page. It's pretty smooth, and really quick. Worth giving up xposed for a few weeks until the nouget release.
Click to expand...
Click to collapse
Yeah, this rom is half baked... Honestly really not worth the time considering there are so many other 6 roms that work fine with our devices (official or not). Furthered by the fact that 7 release is incoming and I'm sure almost all 6 rom dev will halt once we can sink our fingers into some source...
hooks024 said:
Sensors were still not working. I flashed AOKP 7.1 rom from the G4 plus page. It's pretty smooth, and really quick. Worth giving up xposed for a few weeks until the nouget release.
Click to expand...
Click to collapse
Curious about this rom and if you can aswer some questions....
Did you flash N Soak test first?
and
How does it stack up to (what is now) the CyanMod rom?
Thanks ahead of time :good:
MadGoat said:
Curious about this rom and if you can aswer some questions....
Did you flash N Soak test first?
and
How does it stack up to (what is now) the CyanMod rom?
Thanks ahead of time :good:
Click to expand...
Click to collapse
I did not flash the soak test first, and it's working just fine. I didn't try CM first, but it's a CM based rom. The only problems I've had were my adaway app not being able to install the necessary host files, and you can't assign custom ringtones. The developer is working on the ringtone issue, and I changed ad blocker software, so no big deal. I do like some of the new features, like being able to respond to texts right in the notification, and being able to delete multiple emails from the notifications. They're on to nightly builds, and the dev is quick to respond to issues.
Just installed latest build on xt1625 looks great so far, love slim ROMs.
Will try out navigation (maps)tommorow. Thanks
Sent from my Amazon Tate using XDA-Developers mobile app
---------- Post added at 04:13 AM ---------- Previous post was at 04:00 AM ----------
khaoticking said:
If you're OK with an unofficial version there is a slim6 build in the g4+ forums that works great on the xt1625
Click to expand...
Click to collapse
Would u mind sharing the link? I searched the g4 plus forums and don't see slim. Thanks
Sent from my Amazon Tate using XDA-Developers mobile app
Has this been tested for Athene UK XT1622 also?
What are prefered gapps???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lost Kernel for Poco F1
Features:
Compiled using GCC 9.1.0
Latest Linux-stable version (4.9.181)
Latest CAF tag (LA.UM.7.3.r1-07800-sdm845.0)
Touchscreen firmware from 9.1.24
Simple low memory killer
Dynamic stune boost
Dsboost
Tick rate of 100Hz
Anxiety IO Scheduler
Optimzied Beryllium EAS profile
Disabled Debugging features
Disabled Audit
Disabled ZRAM
Disabled CRC check
Disabled Gentle Fair Sleepers
Disabled Useless governors (powersave,ondemand..)
Klapse V5.0
Vibration control
KCAL color control
Backlight min option
Sound control
Boeffla wakelock blocker
F2fs support
Fsync on/off support
Use sync pulses for panels
TCP improvements
Bunch of Peformance and Battery improvements
Saturation set by default to 270 (Keep Colors Vibrant and Accurate!)
Enabled RCU boost for better RT performance
Enabled third party controllers support..like xbox
AnyKernel3 flashable zip
Compatibility
Custom roms
MIUI Pie
Download
https://github.com/LogicLost/beryllium/releases
Telegram group
t.me/lostkernelberyllium
Support
If you apperciate my work and want to help me stay awake click here to buy me a coffee
Credits
The Linux Foundation, CodeAurora.
All beryllium developers.
All others who have their commits or contributions picked.
Source Code:
https://github.com/LogicLost/beryllium
Reserved Post
Good To See Another Developer Keep It Up Bro We Will Support You as You are Spending your Valuable Time For Us.
Olystem said:
Good To See Another Developer Keep It Up Bro We Will Support You as You are Spending your Valuable Time For Us.
Click to expand...
Click to collapse
Thanks[emoji38]
Sent from Lost Coast using Tapatalk
Wow thanks you very much for this! Let's try! ?
thanks for the hard work ...
is there controller support? specifically dualshock 4...
AliNT77 said:
thanks for the hard work ...
is there controller support? specifically dualshock 4...
Click to expand...
Click to collapse
Will add support in the next release.
Sent from Lost Coast using Tapatalk
awesome...
Good job thanks a lot for the new kernel
Some of you reported me random freeze issue,i will work on rebase over ALS base with minimal import of xiaomi changes
Sent from Lost Coast using Tapatalk
LogicLost said:
Some of you reported me random freeze issue,i will work on rebase over ALS base with minimal import of xiaomi changes
Sent from Lost Coast using Tapatalk
Click to expand...
Click to collapse
Bro most of Fts_ts touch panel users have been suffering since day one from this God damn issue which seems to miui team as some sort of a rocket science, i have been suffering from ghost touches / touch freezes, flashed all vendor/firmware versions, No go, flashed most kernels also a no go, flashed different ROMs still no working out , using global kernel from miui minimizes this trash but doesnt radically solve it, tried some codes on the build prop still not working, am just gonna forget that I own a stupid poco cuz it turned onto a flashing mess rather than a functioning phone, oh well a functioning phone when it comes down to touch screen at least.
droidjunky90 said:
Bro most of Fts_ts touch panel users have been suffering since day one from this God damn issue which seems to miui team as some sort of a rocket science, i have been suffering from ghost touches / touch freezes, flashed all vendor/firmware versions, No go, flashed most kernels also a no go, flashed different ROMs still no working out , using global kernel from miui minimizes this trash but doesnt radically solve it, tried some codes on the build prop still not working, am just gonna forget that I own a stupid poco cuz it turned onto a flashing mess rather than a functioning phone, oh well a functioning phone when it comes down to touch screen at least.
Click to expand...
Click to collapse
If modifying software clearly doesn't help, why not send the device to Xiaomi to have them fix it?
TheReduxPL said:
If modifying software clearly doesn't help, why not send the device to Xiaomi to have them fix it?
Click to expand...
Click to collapse
This is ongoing for many users bro, the fix should be in a software as to them it isn't hardware related matter.
droidjunky90 said:
This is ongoing for many users bro, the fix should be in a software as to them it isn't hardware related matter.
Click to expand...
Click to collapse
If it's related to software, then why some users (like you) experience issues regardless of vendor, ROM and kernel, while other users with the same touch screen (like me) do not experience any?
My Poco F1 also has a Fts_ts touch screen and I'm yet to notice any issues at all regardless of software, as the issues were not present on factory ROM+vendor, updated MIUI and vendor, and any other custom ROM I've tried so far.
To me it's clearly not a software issue, so if it's not a hardware issue, then what is it?
TheReduxPL said:
If it's related to software, then why some users (like you) experience issues regardless of vendor, ROM and kernel, while other users with the same touch screen (like me) do not experience any?
My Poco F1 also has a Fts_ts touch screen and I'm yet to notice any issues at all regardless of software, as the issues were not present on factory ROM+vendor, updated MIUI and vendor, and any other custom ROM I've tried so far.
To me it's clearly not a software issue, so if it's not a hardware issue, then what is it?
Click to expand...
Click to collapse
Exactly it must be hardware issue, but xiaomi isn't admitting that and they are saying the fix will be pushed soon and we have been hearing this pushed soon BS since stone age, your Fts_ts must be from a new batch bro.
droidjunky90 said:
Exactly it must be hardware issue, but xiaomi isn't admitting that and they are saying the fix will be pushed soon and we have been hearing this pushed soon BS since stone age, your Fts_ts must be from a new batch bro.
Click to expand...
Click to collapse
Mine is from December 2018 according to the box. Doesn't sound like the latest batch to me, or is it?
TheReduxPL said:
Mine is from December 2018 according to the box. Doesn't sound like the latest batch to me, or is it?
Click to expand...
Click to collapse
Mine is dated October 2018 and is FTS.
But it may be dependent on region too or other factors?
Edit: sorry meant NVT not FTS!
dalyer said:
Mine is dated October 2018 and is FTS.
But it may be dependent on region too or other factors?
Click to expand...
Click to collapse
Yes that's highly possible, I got mine from Canada since am Canadian lol, and that's too unfortunate for me.
---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------
TheReduxPL said:
Mine is from December 2018 according to the box. Doesn't sound like the latest batch to me, or is it?
Click to expand...
Click to collapse
+1 I think Dalyer is right that its region related.
droidjunky90 said:
Yes that's highly possible, I got mine from Canada since am Canadian lol, and that's too unfortunate for me.
Click to expand...
Click to collapse
I'm in Ireland but bought from Ali Express/China.
Note that I made a mistake in my original post and said FTS when I meant NVT! :silly:
dalyer said:
I'm in Ireland but bought from Ali Express/China.
Click to expand...
Click to collapse
Wise move mate, don't they sell it at local stores in Ireland?
---------- Post added at 04:23 PM ---------- Previous post was at 04:20 PM ----------
dalyer said:
I'm in Ireland but bought from Ali Express/China.
Note that I made a mistake in my original post and said FTS when I meant NVT! :silly:
Click to expand...
Click to collapse
Ohh then u r one of the lucky ones bro, but even if you had an Fts_ts rubbish, u can always tell Thomas Shelby about it and he will get your device replaced by order of the peaky blinders ay? Lol