Related
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
Hi guys! Yesterday I decided to unlock the bootloader, flash recovery (twrp 2.8.6) and the cyanogen 11 nightly. Everything went good until I tried to install the gapps, I noticed that the physical shortcut to enter in recovery (after the turning off, of course) didn't worked: the phone restarted or boot up the rom, but I was able to enter in recovery from the advanced restart menu from the rom. Going into the info of the phone where it says kernel there was written "unknown" and no way to overclock. So I decided to reinstall the kernel (the cyanogen11extended) from twrp, everything went good except that I couldn't restart into recovery, it stuck on rebooting until shutdown. So I tought let's use fastboot to erase ad flash the recovery partition and the kernel, but it didn't do anything even if on the cmd said okey and finished in something about a second, but when i tried to enter in recovery I always get stucked on rebooting. So I tought"well if I have the system image I could flash it with fastboot and restore the stock kernel", so I erased the system partition and tried to flash the system.img and I get the message that it is too big for the destination device. Now I don't have a system installed tye hotkeys don't work and I'm stuck on LG screen logo.
There is a solution or do you suggest to send the device in warranty, instead?
Pull the battery and try to enter download mode.
Hi vagelis! You mean without the battery? The hotkey is vol up+power, right?
Edit: i tried without the battery pressing the vol up + power (also tried with vol down + power) and it doesn't work, on the screen I have an image which says to put the battery in, and holding the keys has as only result to reboot the phone showing the image... I guess there's no hope right?
Edit2: I entered download mode using the g2 method, now I have to downoad the kdz rom and the lg flash tool to unbrick, right? But where I can download it since the lg site for the firmware is apparently down?
JasperHTC-Touch said:
Hi vagelis! You mean without the battery? The hotkey is vol up+power, right?
Edit: i tried without the battery pressing the vol up + power (also tried with vol down + power) and it doesn't work, on the screen I have an image which says to put the battery in, and holding the keys has as only result to reboot the phone showing the image... I guess there's no hope right?
Edit2: I entered download mode using the g2 method, now I have to downoad the kdz rom and the lg flash tool to unbrick, right? But where I can download it since the lg site for the firmware is apparently down?
Click to expand...
Click to collapse
http://lg-phone-firmware.com/mobile/index.php?id_mod=57
Ok guys, I was able to unbrick entering in emergency mode e doing the flash tool stuff. The strange thing is that when I start the flash tool putting the file kdz and going forward in the next window, when I click on read phone info the program stops working, if I click directly on stuff then the lg mobile support tool is opened. Now when it starts to write on the phone, the tool says that an error occurred (something like "the server is offline) but on the phone it says the port com and start to download the rom. If I say ok to the error of the lg mobile support tool it stops the firmware update and stops the program, if I don't click ok the firmware update end is work unbricking the phone.
Now I noticed that with the stock rom from the version v10h until the last one towelroot is not working, so I downloaded the v10g germany version (since the italy version was offline) and flashed with the same procedure as I have done with the unbrick, so I could run towelroot and flash the twrp and the cyanogenmod11. Thank you so much for your time!!
The topic is quite old, but I've just solved that problem. You should just do it:
1) hold power and vol down till you see LG logo -- immediately release these buttons and
2) immediately hold power and vol up button to enter into factory reset menu.
Then click "yes" and next "yes", too.
That's all.
I've found a way to boot directly into bootloader/fastboot mode.
Press simultaniously the Vol+ and the power button until the red light lit up. Then instantly leave the two buttons and press the Vol- button until you see the fastboot menu. You're done!!
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Boutchoo said:
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Click to expand...
Click to collapse
I see you don't get it. Up to now the only way to get into fastboot was via "adb reboot bootloader". Or from a successfully installed TWRP.
The "for years" known combinations will get you only into Recovery (Power + Vol up), FTM (Power + Vol down), or into EDL respective the useless DFU mode (Power + Vol up + Vol down). In case you've killed your recovery and your bootimg you now have a additional option to come back to a functional system. Especially for the A2017g with the useless DFU mode.
Can anyone with bricked A2017G confirm?
Controllerboy said:
Can anyone with bricked A2017G confirm?
Click to expand...
Click to collapse
Confirmed NOT WORKING .
It doesn't matter if it's working or not. Thanks for the info anyway.
Neither stock recovery nor fastboot will help if you're stuck in DFU mode for G model. You can't do anything to recover the device in neither mode. All what helps is previously had enabled "allow BL unlock" in developer options. This gives you the possibilty to flash a stock ROM from external SD card. It still needs to be aproved from a bricked "DFU" user!
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
Would you kindly tell us what is not working? Don't you see the menu? Or don't you know what to do with fastboot?
In case you managed it to get into fastboot the next step would be to get into edl by using this trick. -->
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
@tron1, all this does not work. I tried cause I had a bricked (DFU) device. I needed to send it in for repair. And gues: they changed the motherboard.
Even the fastboot_edl results in "remote unknown command". Nearly all commands in fastboot for Axon 7 are disabled bei ZTE.
I will try if it's possible to reboot to edl with the fastboot from the unlock procedure from drakenfx.
forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
ZTE crippled the loader in a bad ass way. But they left the flash command inside. So it should be possible to flash at least a working recovery to the system if you manage it to get into bootloader. As long as my phone is working I won't try it on it. So volunteers!!
Hint -->
fastboot flash <partition> [ <filename> ] write a file to a flash partition
fastboot erase <partition> erase a flash partition
I there a way recover such a bricked device?
I could only boot into bootloader. If i choose boot recovery the phone only shows a red light.
If i choose start its the same red light.
Or should i contact ZTE for a new phone?
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
I have bricked my Axon 7 several times this weekend, but new Qualcomm chipsets are unbrickable!!!!
1. There is a way to enter directly to EDL on most Qualcomm devices and works also in the Axon 7. Just ensure your phone is off, then press the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, otherwise the phone will turn on.
2. Plug your phone to your computer. Windows 10 should detect a new USB device QUSB_BULK without any warning message. Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TWRP).
After that, you will be able to enter into recovery, do a factory reset and then you will be able to restore de initial image from an SD formatted as FAT32 (no, exFAT is not supported by stock recovery) in case of stock recovery. Sideload will not work, always stop before finishing the transmission.
Oki, this is fine for you because you have the US version of the Axon the rest of the axon World is f..ed up with an useless so called DFU mode. Happy Birthday for your Axon.
Sent from my ZTE A2017G using XDA Free mobile app
Oki said:
... unbrickable!!!! ...
... ress the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, o ...
... Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TW ...
Click to expand...
Click to collapse
That did the trick. Thanks
Any idea on why when i tried to enter bootloader mode on my Axon 7 (that i received 1 week ago), it stays on ZTE logo and nothing else happens... What is weirder is that there's a red light and my computer detect it when i do "fastboot devices" but i can't unlock the bootloader...
I tried to downgrade on B02 firmware and nothing... i'm beyond going insane right now.... :-/ It's like ZTE blocked on purpose the access to the bootloader mode...
Hello dear all,
I have managed to brick my LG G5 like an Old Mill Brick.
My LG G5 (lg g5 h850 titan) does not boot. It comes with an error message as follows: Your device is corrupt. It cannot be trusted and will not boot.
What I already did to Unbrick:
Tried to unlock the OEM. No way from USB Debugging as I cannot go into OS.
Tried unlock the OEM from fastboot (remote: oem unlock is not allowed).
Tried to flash some things like (boot.img, system.img) even adb sideload stuff. Nothing works. I cannot flash anything because (flashing not allowed) because OEM is not unlocked, but cannot unlock the OEM because it is not allowed. WHAT in the brick do I have to do now?
Cause of the brick of the bricks:
The LG G5 was on LineageOS, all stable and solid. When a prompt appeared telling me that I have to update the OS. So I was like yeah ok whatever. BUT, it did from OTA. I also had a specific LineageOS APP for updating the OS. After some minutes (updating) I immediately panic and started worrying. BECAUSE, I knew what time it was (my device is dead). I wanted to turn my phone off but it was already in Recovery (TWRP). So I just hit cancel. BUT after booting up the LG G5 that corrupt device error appeared and I cannot manage to get rid of it.
Please I need your help! I also watched and tried (2+ hours) to manage to solve this via Google and different links and Unbrick guides but nothing happens. I cannot unlock the OEM because it is not allowed. I cannot flash anystuff because the OEM is not unlocked.
Update: So, there is no Recovery System present. No stock Recovery, No TWRP. And I think no OS either. So only thing that is present is the bootloader screen smh.
Can you still get to TWRP?
firenemesis7 said:
Can you still get to TWRP?
Click to expand...
Click to collapse
No If I hold the volume down button and Power and when the LG Logo appears I release the power off and press again nothing happens. It goes again into that error. I can go in bootloader but can't do anything with adb or fastboot.
I think TWRP is gone too :/
You should be able to get into download mode. Hold the volume up button with phone fully powered down. While you hold the volume up button insert the usb cable. Then you can flash the full system kdz with LGUP
https://www.youtube.com/watch?v=_V7Mtd3eKzk
firenemesis7 said:
You should be able to get into download mode. Hold the volume up button with phone fully powered down. While you hold the volume up button insert the usb cable. Then you can flash the full system kdz with LGUP
https://www.youtube.com/watch?v=_V7Mtd3eKzk
Click to expand...
Click to collapse
Thank you very much! I didn't know I could do it in anotherway. Will definitely try this! Thanks again!
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
shakirbaloch said:
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
Click to expand...
Click to collapse
Hold volume down and power at same time
shanman-2 said:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
Click to expand...
Click to collapse
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
shakirbaloch said:
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
Click to expand...
Click to collapse
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
phone not able to go to recovery and fastboot mode
:crying:
shakirbaloch said:
phone not able to go to recovery and fastboot mode
:crying:
Click to expand...
Click to collapse
Then try the second option. You will have to do a bit of reading but I am pretty sure you will be able to get it going again.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
shakirbaloch said:
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
Click to expand...
Click to collapse
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
shanman-2 said:
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
Click to expand...
Click to collapse
thanks but this is also sd card update file link no sp flash tool
It has instructions on how to install update.app firmware, have you tried it?
did you fix your problem .. i have same problem here
above
hello, this works for me everytime . This problem mostily occurs when you wipe or clean a catch memory in huawei TIT-u02 /A00 .
if you can not access the recovery then do the following
1. copy the dload file to you sd card
2.insert the sd card to your phone
3. Press simulitaniousury power+vol up + volume down at once
4.One the phone boots , release only power button while still holding vol up +vol down
5.release vol up +volume down at once when you see android log (installing system update )
Note : the phone will repeat the isntalling system update and errosing more that 6 time . then your phone will restart