Hello all
Ok, so, i tested the method for unlock bootloader.
http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
I have backup file, ad use directly the aboot.img in attached post...
It's a stupid idea.. beacause the backup and the file attached is not identically...
So i search a solution,
http://forum.xda-developers.com/g2-mini/help/wrong-aboot-img-black-screen-response-t3366683
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
http://forum.xda-developers.com/showpost.php?p=55753338&postcount=5
And more other posts
But i have one problem :
The phone dont boot, dont start the donwload mode, just after remove a battery, i have a symbol to explain the barttery is out.
So, i think my phone is not out.. i hope.....
Please help me...
Thanks
aboot.img is my original file.
abootattachedposts.img is a aboot.img to
http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Thanks in advance
Ok i find a solution
This is really very boring ...
Here is how I did.
Having some idea in electronics and batteries, I remember that there are certain specific management with working with batteries, a friend, I lost contact since my affimé ago lontemps that 4 battery connectors had the specifications on the telephone, and to repair Phones in technical centers it change the battery with a special, with just 2 pins, the positive and the negative.
I put paper between the positive and the negative of my battery and miracle, I manage to detect the phone ..
I tested this on my samsung s6, HTC OneX and a Galaxy S3 + lg windows phone ... under whose IMEI is cleared) ... Is work perfectly.
So i create after-a tutorial for D620 / D620FR / D620R
I love that
Ok it's a luck, and now, is impossible to renew a experience...
OOooo Yes, ok i understand now..
It's not 2 pins, but 3pins...
I have a screenshot
Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
Hello again
Sometimes we can brick our devices by a bad unlock, flashing process, or simply bad luck.
The phone doesn't turn on and there is a Red Led Of Death when pressing power button. Even with a GREEN led when we plug the phone with back key pressed the computer detect the phone as "unknown device" so there is no chance to get fixed by Flashtool or SEUS/PC Companion.
Well this problem normally means that the bootloader is broken or damaged. So, in order to fix it we need to write a new SEMCboot and after this we were able to flash a full and fresh firmware with flashtool and unbrick our Xperia.
This process like unlocking process requires SETool dongle/box and a paperclip to make a testpoint to put the phone in flash mode and be able to write the SEMCBoot.
I can help to anyone with a bricked Xperia Arc/Play/Neo/Pro just make send me a PM.
Like unlocking process you will need this 3 programs:
SETool software for unlocking
USB Over network client for remote dongle
Teamviewer client for remote support and guide
anyway if you want me to buy a Dr. Pepper just
Sometimes even after fix the bootloader the phone doesn't want to boot. In most cases this is by a damaged TRIM AREA (TA).
The trim area is a part of softwere stored in eeprom so it can be read and write with the proper software like SETool.
Read and Write trim area is very easy but you should know that some sectors of the TA are unique for you phone, lets call it Security Units.
The process for repair trim area is indeed very easy.
For sure we need Testpoint like in unlocking or bootloader repair process.
1. Backup Security Units with this script:
Code:
taread:00020851
taread:000207D3
taread:000207Da
2. Write a Working TA backup from another phone (same model)
3. Restore Security Units.
Thats all, now your phone should boot well but is 90% possible that you dont get Signal so for fix that we need to unlocking.
If this last thing is needed you can refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1232033
huh u
huh u again . plz mention it is not a free tool so everybody can understand what is going on......????!!! you said it is free ?? free as 20 dollars or what i sent u a pm and you said pay . how could it be lol
taliani2 said:
huh u again . plz mention it is not a free tool so everybody can understand what is going on
Click to expand...
Click to collapse
need fix bug 0%batery .....
anikill3010 said:
need fix bug 0%batery .....
Click to expand...
Click to collapse
There is no fix as of yet for this problem. unfortunately, the devs are still trying to find a solution.
Trim area repair process is now tested and working for NEO PLAY and ARC
Alejandrissimo said:
Trim area repair process is now tested and working for NEO PLAY and ARC
Click to expand...
Click to collapse
Hi.
Is repairing the "Trim area" a solution for the 0 % Problem?
greets,
Marco
waiting....
gork1975 said:
Hi.
Is repairing the "Trim area" a solution for the 0 % Problem?
greets,
Marco
Click to expand...
Click to collapse
Nup is not
Then... how can it be fixed?
Nobody knows yet.
Thanks Alejandrissimo!!
Alejandrissimo is the best!!
Two weeks ago, I tried to flash cyanogenmod7, but I'm a n00b, so ofcourse it went wrong. My device(Arc) wouldn't boot anymore, I tried some things and suddenly it even wouldn't connect with fastboot..
So I saw this topic and some other ones from Alejandrissimo, Many comments praising him for his patience and help, that's why I contacted him, and that evening he helped me getting my phone working! He really Knowles where he is talking about!
Only problem I had left was NO SIGNAL, I asked Alejandrissimo if he could help me with that and yes he said he could. For almost a whole week, oh well. Much time difference, so it was hard to catch eachother we tried flashing it again and again in different ways. Yesterday he thought he had the answer, we tried it, and it worked!! I'm so happy he helped me getting my phone back! So so many thanks again Alejandrissimo!!
In order to unlock my trim area for my SIM I had to pay 24USD, cause Alejandrissimo had to buy credits at Sony Ericsson, but it was totally worth it!
Sent from my WORKING LT15i using xda premium
happened to me this morning but with a lot of luck i managed to get the phone in the flashboot mode (with a lot of tries connecting to PC) and install the stock FW (as i read FW is light on the boot loader)and tried to boot (with a lot of tries) i got it boot once but stops after Xperia screen i tried and tried until it booted normally i want to get back to the custom ROM but afraid that problem accrued again.
NOTE:last night tried to install True licensed market to get paid apps for free the phone heated and heated i uninstalled it and connected the phone to the laptop to charge overnight.
check your gtalk @Alejandrissimo. i've just send you invitation
i need your help for giving my mini pro back,now its on the dead of red led :crying:
Hi people. Because of work and children I have no much time to visit every thread on xda or check all PM, but you can always can contact me to gmail or hangouts.
First of all, I wanted to say hi to everyone here and thanks for the great forums
Secondly, as to the first question that pops up in mind, yes I did read the forums and I did google the problem and as a last resort, I need help!
I was trying to flash the original firmware from sammobile with odin 3.07, I wiped data/factory reset,formatted system and did everything and I went to the download screen, started odin and everything was just fine...only problem is that the flashing on odin took about an hour:
first it went fast but then it got stuck where Kernel was written above and it got stuck for about an hour and I just left it there and went doing my things...but I came back and a big red Failed was written on Odin...I checked it out and it turned out the phone was disconnected from PC...so I freaked out and turned off the phone...I thought I could go again or flash another ROM or something...but my phone won't start...it doesnt respond to any key or combination I try...I cant get into download mode or recovery mode and the phone doesn't start at all.
so my question is, did I hard brick my phone ? if so, then what do I do ?
if not, then also what do I do...
NOTE: before I started flashing the battery was 100% charged.
EDIT: I have Samsung Galaxy S II I9100
was trying to flash this firmware: (sorry i cant post links)
*************************************
Model: GT-I9100
Country: Israel (Orange/Partner)
Version: Android 4.1.2
Changelist: 1211311
Build date: Thu, 04 Jul 2013 12:15:40 +0000
Product Code: PTR
PDA: I9100JHLS7
CSC: I9100PTRLS4
MODEM: I9100JHLS2
************************************
also, [Q] Can I replace Galaxy S II GT-I9100T motherboard with another's S2 model ?
any help is much appreciated and thanks in advance!!
*****************SOLUTION******************************
this is for future referrence:
you can read about the problem above.
What's there to try ? thats ALL I could find:
I tried kingrats hotboot method, didn't work.
I tried a jig, didn't work.
I tried something called RIFF Box, my friend had one, and IT DID WORK...I got my phone back.
I DIDN'T try replacing motherboard, but I'm sure it would have worked as well.
***********************************************************
You couldnt have looked very hard,as my pal Mistahbungle posts chapter and verse about your problem every 2 days.
Maybe post your model and what you were trying to flash,and he can break the news to you gently when he replies to your thread.
theunderling said:
You couldnt have looked very hard,as my pal Mistahbungle posts chapter and verse about your problem every 2 days.
Maybe post your model and what you were trying to flash,and he can break the news to you gently when he replies to your thread.
Click to expand...
Click to collapse
thanks for the reply! I edited the post.
Ok its probably bricked.You need to try king rats hotboot method,or see if a jig will work.
Failing that its jtag or even new motherboard.
theunderling said:
Ok its probably bricked.You need to try king rats hotboot method,or see if a jig will work.
Failing that its jtag or even new motherboard.
Click to expand...
Click to collapse
okay I tried kingrats hotboot and it didnt work.
I dont have a jig and I know I can get one from ebay but I wanted to ask, whats the probability that it would work in my situation ?
I had the CyanFox 4.4 before I tried to flash the new firmware but it I wiped all data out before flashing on odin so I'm guessing that info doesn't help at all.
What's the chance of a jig working ? About 0.0000001%. But try one anyways, won't cost you anything other than a few bucks. It's either a JTAG (though again a fair chance that isn't possible) or more likely a motherboard replacement.
okay then another question, if I connect 3 x 100 ohm resistors with a micro usb can it replace the jig ?
like in this video: search "Revive bricked Galaxy S2 I9100 using USB Jig [HD].mp4" in youtube first result.
Yes. Any of those tutorials should enable you to make a functioning jig if you do it properly. Can't speak as to whether they work or not myself given I bought one though.
ok ill give it a try.
also, a friend said there's something called a "special box" that runs a "simulator" on your phone and copies the firmware installed data on the phone's sd card...and once its done you can start your phone as if you had flashed the rom with odin. is such a thing possible ?
Never heard of it, unless he's referring to a 'RIFF box' which is used to JTAG a phone. If you can find someone who will try a JTAG on the basis of 'no pay if it's not JTAG'able', you might as well, even though it probably won't work. A motherboard replacement is almost certainly the only fix in your situation.
I wouldn't be forking out money for a RIFF box if I were in your situation given that it won't work anyways, it costs a lot more than paying someone else who already has one/knows how to use it, and you'll likely never use it again.
MistahBungle said:
Never heard of it, unless he's referring to a 'RIFF box' which is used to JTAG a phone. If you can find someone who will try a JTAG on the basis of 'no pay if it's not JTAG'able', you might as well, even though it probably won't work. A motherboard replacement is almost certainly the only fix in your situation.
I wouldn't be forking out money for a RIFF box if I were in your situation given that it won't work anyways, it costs a lot more than paying someone else who already has one/knows how to use it, and you'll likely never use it again.
Click to expand...
Click to collapse
he was referring to the RIFF box. I'll try with a jig and see if it works if not motherboard it is then.
thank you for your help
Good luck. You're welcome
how much does a motherboard cost, by the way ?
Variable. A service centre won't sell you a new one without them replacing it for you, so you're at their mercy with regard to how much they want to charge you for labour. Or you can source 2nd hand one from a 'donor' phone (say a phone with a broken screen) and either swap the boards yourself or pay a local mobile repair shop (who isn't a Samsung service centre) to do it which will still probably be much cheaper than the new board/service centre option.
Search online for 2nd hand boards (the usual places; eBay/Swappa/Google search).
and does changing the motherboard change the imei ?
If you put a 2nd hand board in, yes. If a Samsung service centre gives you a new board, in most countries the device will keep the current IMEI. Either way, it makes no difference in your ability to use the phone I.E it will work normally in either case.
can I replace the motherboard with other galaxy s2 models or does it have to be the exact same model ?
mine is Galaxy S II GT-I9100T
The I9100 & I9100T are exactly the same phone except for slight difference in radio output, I'm not aware of anything on the motherboard that's different in either model. Everything I've ever seen on here over the past two years says on many networks you'll need to use specific modems with an I9100T (I.E the modems which were bundled with stock roms released by carriers who specifically sold the I9100T) in order to get the best connectivity, which has suggested the difference is in the modem firmware only.
So, to the best of my knowledge, you should be able to use a motherboard from an I9100 in a I9100T. That may or may not be the case though.
Edit - OP - Edit the title of your thread to that of the duplicate thread which was closed by mods & make another post to this thread along the lines of your OP in that closed thread.
I posted what I tried for future reference.
can anybody help me here with this as this rooting stuff is all new too me.. i managed too successfully root the device via odin. so somewhere along the line ive pressed something i wasn't meant too and have ended up from what i have read online bout bricking and bricked devices i am sure this is what has happened to me.. so what i would like too know if any1 could help is by telling me what my next best steps are for unbricking my device that's if it will be possible :good:
my device will not switch on at all!! not even to download by doing volume/power buttons
and the only time anything changes to tablet is when plugged into charge by mains an empty gray battry bar appears asif it where about to start charging but it never actually does anything part from have a small loading type circle again no movement [/CODE]
You have 2 options at this point, if you are unable to get into Download Mode:
Debrick img
or
JTag service
For the debrick img, you might reach out to this guy http://forum.xda-developers.com/gal...rick-image-t3222270/post63445086#post63445086 to see if he can point you in the right direction. Do NOT try that file unless you also have the i705 variant.
For the the JTAG service, I recommend these guys: http://www.mobiletechvideos.com/samsung-galaxy-tab-2-7-0-jtag-brick-repair/
I've tried looking online for the stock rom but there is not alot of support for this device. It is a kinda cheap smartphone. I can access the revocery mode to install roms from my sd card but I can't find a working rom. I've searched the internet for 2 hours straight looking but I can't find anything. I really need help finding a compatible rom. My friend recommended my to you guy because he said you were very reliable. I love you. Please help me fix my phone I am very depressed. It's the first phone I've ever gotten. I bricked it by editing the build.prop file and the generic.kl file to disable the physical keys on my phone and enable the on screen keys if that makes sense. if you have any questions AT ALL feel free to ask. I love you guys, so please don't give up on me. I just want my phone back.
(I have a laptop, my phone, a USB cable and a micro sd card)
Again, it's an Alcatel One Touch Model: 5020n
The One Touch can also be appreviated to OT. My phone is also called an M'POP on the manufacturers site.
My phone looks exactly like this: http://i-cdn.phonearena.com/images/p...Touch-MPop.jpg
My phone carrier metro pcs
Ares30 said:
How do I fix it?
Click to expand...
Click to collapse
There's hardly any information to go on here. Please state your phone name and model number and then we will be able to help.
kirito9 said:
There's hardly any information to go on here. Please state your phone name and model number and then we will be able to help.
Click to expand...
Click to collapse
ALCATEL onetouch
Model: 5020N
I have a friend who can put new roms on the phone he has all the necessary materials and he is quite knowledgeable.
What rom can I put on my phone please. I'm really depressed because of all this. This was the first phone i've ever gotten.