TWRP Problem - Android Q&A, Help & Troubleshooting

my phone is fully stock currently. Im trying to install TWRP Recorvery into my phone, but there is some problem. i enter download mode, then open up odin and install the recorvery into my phone, odin says pass but still my phone has stock recorvery. ive tried factory reset, cache reset. etc. the TWRP version for my phone is CORRECT. im sure about it.
Phone model is Samsung Galaxy Tab S 10.5
What is causing this problem?

Had a similar problem with another samsung phone, which I fixed by unlocking the bootloader first, then trying the custom recovery install again.
Haven't looked at your particular model, but perhaps you need to do that first before recovery goes through?

Related

[Q] Samsung Galaxy Tab 10.1 bricked?

Hi I hope someone can help me. I have searched this forum but could not find a similar situation to what I ended up in...
I tried to install a custom ROM on my Galaxy Tab 10.1 using the CWM/Odin.
This seemed succesful but was not, it did not start but was stuck in the Samsung logo.
So I tried entering the CWM and download and install an original Samsung ROM. I can get it into CWM, but CWM cannot enter the download mode only the other mode.
In this mode all options are available:
- reboot
- apply update from SD card
- wipe data/factory reset
- wipe cache partition
All options have been tried without any luck. In the update from SD card it only shows ...
or Error opening /data/media: no such file or directory
Any ideas how I could get this directory back or put a ROM on the Samsung in this situation.
Odin does see the Galaxy but as I cannot get it into Download mode I am unable to download anything to it.
All or any suggestions are very welcome!
1. CWM (Clockworkmod) =! Odin.
In the beginning, you don't have CWM installed. You install CWM, by flashing CWM on your Phone with odin.
Odin is the Windows Programm, that is used to flash Recoveries/ROM's/Kernels onto your device.
2. it seems, that you still have the default Samsung recovery installed, that meand CWM is not yet flashed on your device.
If the flashing process was succesful (I suppose it was done with odin), but you can't get past the Samsung logo, that means, you probably flashed a rom, that isn't made for your device(ex. a GTab 10.1v Rom).
If you DID flash a wrong rom, then you probably ****ed up the partition table and removed the Download Mode(Odin Mode). Strange thing is, that you still have the Stock recovery.
Could you please redirect us to the rom you downloaded?
Also, did you flash with a repartition on and/or a .pit file?
hi Kaukassus,
thanks for the reply.
OK I checked the files and what I did.
I think I totaly screwed this up. It was a theme I tried to install the AOSP_HC_v1.3_3G+KI1.
I rooted the Tab. So first when the Tab was still functioning installed it on the TAB via USB.
Than tried to install this via update from SD card.
This appeared to work initially. But hung at the start.
After that I tried (via Power Volume Up) wipe data/factory reset.
No luck.
After that I tried wipe cache partition followed by wipe data/factory reset.
And this is what I got now..
Bad news is the Tab was/is a X-mas present and I managed to screw it up even before I officially got it !-(
The valuable lesson you're learning is that you need to be aware exactly what things you're flashing and their compatibility with your device and the software it's running.
You haven't mentioned what specific device you're using or the specific things you've tried to flash (as kaukassus pointed out, direct links to threads where you got the files you tried to flash are best). Not sure if you're aware but not all GT 10.1's are equal; there are several models out there and each and every ROM is specific to a particular device. Verizon LTE GT 10.1's like mine can't take ROMs from any other device for example, it's likely that the new T-Mobile 4G one's wont be able to trade ROMs with Verizon ones . . you get the point.
When you say you installed via USB what exactly did you mean? If you simply copied a zip file via USB to the tab to flash in recovery mode that's not installing; the flashing from recovery may be but the file copy operation is not. If on the other hand you pushed things via ADB or you flash using Odin software then that's a different story.
Best thing to do at this point is to properly identify your device, look for a stock recovery image for Odin and flash that via Odin to your device. At that point you can start from scratch again to build what you want.
Thanks Muzzy996.
You are right. I was in a rush and should have taken more time.
However I am getting somewhere. Managed to get in download mode twice today, don't ask me how. This Tab just will not go into download mode!
However I did not have the stock ROM ready to be installed.
Will keep you updated.
i have the same problem. i just rooted my device was going to overclock. decided to save my rom with rom manager. saved it device went to reboot now the samsung galaxy 10.1 shows up screen goes dim then shuts off, and will cont. do this. i can get into download mode but recovery will not work. is there anyway to download my stock rom. im using verizion 4g 10.1 any help would be great, btw sorry to thread jack
Problem solved.
Managed to get it in download mode again and install stock rom via Odin.
Appeared to work fine. But kep switching off, even after full night of charging.
This morning Tab was dead after recharging whole night..
Got it back on by holding volume down and power button down.
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
I crashed both my I9000 (galaxy s) flashing custom roms and my tab 10.1 (editing some system files) both ended up just looping but managed to get both back. I purchased a small connector of ebay £1.59 that has just a resistor accross pins 4&5 331k I think anyway plugging this into most samsung devices boots them into download mode. Even before getting my resistor I managed to get things working I think that you'd have to be properly unlucky to really brick a samsung I've flashed both my devices with all sorts of crap with my little resistor I just reset them with ease.
Brian
h2bmess said:
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
Click to expand...
Click to collapse
did you ever resolve this issue? i am currently faced with the same issue.

[Q] TWRP bootloop

While I did find a similar posts, they were for different devices. I also tryed to search o different sites for similar problems to no avial.
What Happened: After backing up system data and app data then removing Foxhound ROM with factory reset, and installing UltimaROM i came to find that the modem did not install correctly result in no connection to my cell network. I booted into TWRP recovery to try and do a re-install of the ROM only to find that TWRP was restarting itself every 3 seconds or so. I attempted to restart the device which i found to result in a TWRP bootloop that i cannot get out of, it constantly is booting into recovery mode and i cannot get it restart the OS.
What I've tried: Since i can get into download mode i decided to attempt to re-install TWRP using Samsung Galaxy S3 Toolkit but since i do not have USB debugging on i cannot do that. I'm mainly looking for a fix before i go and claim it on the warranty saying update went bad or something. If people need more information I will try to provide it as best i can.
Summery if i confused people is that TWRP is in a bootloop, i am unable to get to the OS, but i still have download mode available.
I fixed it but not how I would have liked to. I ended up losing all data due to flashing stock ROM using ODIN. I would still much appreciate a alternative method that does not involve loss of data though just for future reference, that is if anyone knows a alternative method.
Sent from my GT-I9300 using xda app-developers app
could've tried reflashing TWRP or any other recovery through odin
I have an LG Optimus Q (LGL55c) with twrp loop. I was trying to go back to stock rom, instead I deleted all the system files in twrp when it was working...Then I rebooted back into recovery and get the loop. Does this mean I completely bricked my phone? I tried using adb, adb shell doesn't work. It does find the device. Even tried the LG update with no sucess Any ideas or suggestions?
I just read the forum title, I thought this was for the Optimus Q not the Samsung S3. Sorry mods
Temasek unofficial cm12 5.02
I was running this rom when my power button shorted and I got it replaced but then I tried to do a complete wipe and clean flash but since then it has been twrp bootlooping, tried to flash the latest recovery through Odin but still doesn't work also tried stock firmware flash but says binary not available.
This is my secondary device and I've not been in touch with Odin for a while. Any help will be appreciated.
Thanks
Download latest firnware from sammobile.com and flash it with Odin, as described on sammobile: does Odin finish with '1 succeeded'?
I'm in a very similar situation, but with my Samsung Galaxy Note 2 (N7105). It's rooted, and I am, or was using TWRP 2.7.0.2. ROM is CyanogenMod 12, 5.0.2 Lollipop.
I did a factory reset from INSIDE Android, and chose to wipe internal memory. Phone did the reset and wipe, rebooted into TWRP instead of Android, and now I have TWRP boot loop.
I posted more about it here: http://forum.xda-developers.com/showpost.php?p=60247503&postcount=3671
I have the Problem toooo!
What must i do Now!
with my S3 is the same!!!
For posterity:
With an old (2014?) version of TWRP and a custom ROM, I tried reverting to factory settings. That caused the phone to reboot TWRP, and the screen would flash every couple of seconds. I flashed a stock recovery image I found on Google, and when it restarted again, the wipe was completed successfully. My intention was to wipe all user data anyways so I can't say if this method might save it.

[Q] I9300 stuck at samsung logo, even after installing stock rom

Hello everyone,
I had CM11 installed on my Samsung galaxy S3 I9300. But I wanted to trade my phone with my dads and he wanted the simple stock rom (Android 4.3). I tried flashing the stock rom on it which went good until the last step when it should reboot itself. But i'm stuck at the samsung logo, I tried everything (pulling out battery, rebooting it, install stock rom again,...).
And I even can't get in recovery mode. The only possible mode in can get in is download mode. What can the problem be? Have I done something wrong? Should I try to install another stock rom from another country? Is there another way to get in recovery mode? I am from Belgium and I can't find the "Belgian stock rom", so I tried installing it from the Netherlands, is that the problem?
Thanks already.
What is the filename of the stock ROM you flashed and which options did you select in Odin?
hamzah.bhatti34 said:
Hello everyone,
I had CM11 installed on my Samsung galaxy S3 I9300. But I wanted to trade my phone with my dads and he wanted the simple stock rom (Android 4.3). I tried flashing the stock rom on it which went good until the last step when it should reboot itself. But i'm stuck at the samsung logo, I tried everything (pulling out battery, rebooting it, install stock rom again,...).
And I even can't get in recovery mode. The only possible mode in can get in is download mode. What can the problem be? Have I done something wrong? Should I try to install another stock rom from another country? Is there another way to get in recovery mode? I am from Belgium and I can't find the "Belgian stock rom", so I tried installing it from the Netherlands, is that the problem?
Thanks already.
Click to expand...
Click to collapse
First thing you should always do after flashing stock rom or any rom that causes a boot loop is to boot into recovery and factory reset then wipe cache this solves 90% of bootloops. Now I know you said you can't get into recovery so try flashing a custom recovery with odin then try booting into that and then factory reset.

[Q] Unable to enter recovery, Odin won't install custom recovery

Hello. I have a Galaxy Mini 2 (GT-5600d) more specific, and I installed a custom OS which the phone couldn't support well, so I wanted to turn back to my stock ROM. I found the ROM and installed it using ODIN 3.09 and the only problem I have is that I have to do a data wipe from the recovery menu. Problem is, the recovery menu is jammed for some time now. I didn't need it much before and never taught it could screw up. Seems that now I am stuck with the phone in a continuous boot loop. Any suggestions?

Unknown path to /sdcard

Hey guys! I had recently installed an Android 4.5 rom on my Samsung Galaxy S i9000, but I didn't really like it, so I went back to clockwork mode and restored the backup (which I am pretty sure I had saved prior to installing the rom). What happened then was that I couldn't power on my device. It literally gets stuck on the Samsung Galaxy I9000 startup screen. I can however access download mode and I can access clockword mode recovery. BUT, when I try to install another update with clockword mode recovery or trying anything on cwmr for that matter (factory reset, cache reset, anything...), I get the error message: Unknown path to /sdcard and I am stuck at this. Can anyone tell me how to fix this issue? Please, I need help quickly!
I would just restore with official firmware via Odin and restart the process. This will set everything back right so you can have a fresh start. http://forum.xda-developers.com/showthread.php?t=1102881

Categories

Resources