Hello XDA Developers!
tl;dr I need either a solid, light OS replacement for Android 2.3 on my Atrix, or I need a video streaming and virtualization app with no lag that works between android devices and either windows or linux desktop.
First I'd like to say how impressed I am with you folks. Massive amounts of work most be done on a regular basis, and so I tip my hat to you in thanks for looking at my potential problem/question.
I've got two devices that I'd like to make some serious software changes to, one of them my Atrix (the other is a Flytouch Tablet ARM11 with Android 2.3, but that's for a different forum). Let me start by saying that I like to think of myself as very technically literate, but when it comes to linux I just don't have nearly as much experience as I do with windows/mac, and it is about to really show.
What I want to do is load a light Linux OS on these devices. Normally, if I was going to install a new windows kernel on a machine I would copy an ISO to a USB thumb drive and make the drive bootable (using the MS program Windows 7 USB/DVD maker), then startup the PC and either through the BIOS or by hitting the proper button during the startup sequence I would ask the PC to boot into the drive and begin the installation.
Questions:
What is the image file type for mobile OS's?
How would one choose the right type of linux OS for an Atrix?
What is the difference between flashing a ROM and installing and OS?
Why is it when I updated my phone recently that it became unrooted?
(and) Is there any way to revert this process to make rooting easier?
Is there any way to capture a video output (like a stream) and broadcast it to these mobile devices so I can avoid changing their software alltogether?
(and) Could I just remotely control another PC from the mobile device, letting it do all the actual computing?
Can I use the Webtop Dock as a monitor for my desktop if I can find the proper HDMI cable to connect it to the HDMI output on my desktop video card?
(and) Can I also connect the Micro USB and use the keyboard/mouse (hooked into my desktop motherboard) on it as well?
(and finally) Can I use my Atrix as a prototype omni-tool by docking it in a docking station, attaching various tools that work with a linux operating system (wide-spectrum ultrasound imaging, temperature monitors, vital monitors, electronic laser saw (USB) (with separate power attachment of course) and extendable, movable USB cameras?) and then strapping it onto my wrist with a cool leather bracer design?
My end-goal is to have all three of these devices on the same network, with the ability to seamlessly access my data between them. For example, if I'm working on a document, I'd like to be able to access the document in a document editing program across all the platforms (imagine google docs with multiple users) however with one MAJOR stipulation: I'll be on a local network with NO INTERNET ACCESS!
Briefly (to better help you understand just what I'm trying to do) I am a freelance archaeologist/deep sea explorer/ROV tinkerer about to do a series of surveys mostly by myself in some VERY remote locations. I'll have a Wi-Fi network to link all of my devices together running out of my boat, but it's only for data sharing between each other, and since Satellite Internet is a joke, I can't think of any way to get data out there, and I've decided to live without it while I'm away.
I have a webtop dock for my Atrix, and the environment developed by Motorola is far too restrictive. I've tried countless fixes to try and get the webtop2SD to work, but I must be doing something wrong (Maybe the latest update screwed it?). I think since I'd like to use some linux applications while on the mobile devices, I would rather install a custom OS for both.
OR (preffered)
Even more simply, I'd like to stream the video feed and remotely control my desktop PC (located on the boat) on the mobile devices, but with yet another stipulation: I can't have FPS lag (I usually get 1-2 FPS with all the virtualization and remote control apps I've tried). This would in some senses be the preferred option, since I really don't want to spend oodles of hours trying to get some program to work in a difficult, restricted environment like these mobile device's current OS's. Is there a good, non-lagging version of desktop virtualization for Android OS?
About that webdock: I can't seem to find a female-to-female micro HDMI cable anywhere on the internet, thought I did find one Micro HDMI extension cable, and bought it promptly. I could buy another, but cut the male ends off and splice the female parts together (**** just got kinky). But if I could, would this work?
Phew that was a lot! Again thanks so much for thinking for me!
I've personally never found any kind of remote desktop software that works without lag, but it might be possible to find some. Someone else might know what to tell you there.
After doing some basic searching, the only collaborative document solution that I've found has been Etherpad Lite. You could set up a desktop or laptop running linux as the server, and all the other devices on your small network could (theoretically) run a browser based client similar (but far less advanced) than Google Docs. This way, everything on your LAN/WLAN could access the application, if it's stout enough to support your needs.
https://github.com/Pita/etherpad-lite
http://en.wikipedia.org/wiki/Collab...Real-time_collaborative_text_editing_software
Everything you're looking for just seems to be limited for Android, I wish you the best of luck.
I have always found Teamviewer great for remote PC control from my Atrix. They have a nice app and free license for home/personal use. I get minimal lag controlling my PC at home when at work, but that's over WiFi. Not very fast and pretty laggy if I am on data with my Atrix.
BTW............I can work on documents, transfer files to and from PC's and laptops, print documents on my wireless printer, etc. across my home network from my Atrix, all routed through a Netgear WNR3500L running stock firmware (dd-wrt actually slowed my network down and reduced WiFi range considerably, so I reverted to stock).
First, there is no "magic" within the lapdock device. It is a nice HDMI screen, a couple crappy input devices on the USB side, and a battery. The standard Moto software does recognise the usb device and do some software magic, but certainly you could use the dock on it's own w/o the phone.
As to completely replacing the /osh webtop OS that Motorola provides, that is challanging.
There are 2 basic ways to open it up though. Go to the developers subforum and look for webtop2sd and "full Debian".
Somebody did post recently with an attempt to fully replace the webtop OS. he was using gentoo, so look for that and you should find it. But I suspect it is early, and likely to be a significant WP.
As to learning all this ****. If you do some Linux developement or heavy hacking (which it kind of sounds like) you should set up a full full blown 'droid dev platform and start playing. It is big and bulky, but you will learn faster that way than just searbhing around.
EDIT: just reread your post that you are light on Linux. if you want to do anything more than just follow along, it might be a good idea to setup something like an Ubuntu and get familiar there. 'Droid is way different looking (it really basterdises things around) but yoiu need to know both if you want to play with webtop hacks.
Thanks all. I'll look around again to see if I can find the threads you mentioned. I've tried Webtop2SD but to no success so far.
Thanks again.
Hi all,
Hope I'm posting this in the right place. If not, please move.
I have Remix_OS_for_PC_Android_M_64bit_B2016072603 installed as a virtual guest in Virtualbox 5.0.24_Ubuntu r1083 with Xubuntu-core 16.04 as the host machine. Using a Toshiba Satellite Pro L510. Took me four days to nut out how to get to this point, but installed and booting and stable now.
My issues:
1/ Location: When I try to run an app from Play Store it thinks I'm outside of Australia/New Zealand (the app I'm trying to run is specific to those regions). I'm in Australia, the app works fine on my phone (am logging in exactly the same way).
(* Update: I installed GPS Status and it tells me GPS is not switched on. Was hoping to then change the location with Fake GPS, which I also installed. It won't do anything with same message: GPS not enabled or similar.)
2/ Resolution: The screen defaults to portrait, as expected I suppose, but I have a 1366x768 monitor and it doesn't fit in the screen. Consequently, I have a scroll bar because as Virtualbox Guest Additions is not compatible with Remix OS at this point there is no mouse integration (I need to hit Right Control to use mouse in host and same to use in guest again). I need to press a bunch of keys to just scroll the screen up and get back to where I was going. :|
Other than that, all working great, Remix OS is great, thanks to the team that created it. The main reason I was wanting to use it is to use this one app on my computer (AFL Live) and plug my computer into the TV. I don't use my phone for anything other than that one app, SMS and the occasional call so I am by no means an Android junky. In fact, before this, I knew very little about it (but a lot about Linux/Ubuntu).
This install has been a quest, a learning curve, and these are my last two hurdles so I'm calling for help if it's out there. Trawled the net, tried some things, but have hit a brick wall with these two problems.
My first post so not sure of the protocol. If these two issues should be the subject of two separate threads, mods please advise and I will edit accordingly and create a new thread.
Tnx in advance.
(* Further update: Just having a read of this: http://forum.xda-developers.com/remix/remix-os/remix-os-installation-rooting-t3293769
Wondering if rooting the device would allow me to change any of these, in particularly, the location to Australia where it should be, or switch on GPS so my app can see where I actually am. I'm presuming it thinks I am in the Cocos Islands or somewhere else!)
(* And further update: The screen resolution was as easy as typing Alt+F1 to launch a terminal then 'wm size 1366x768'. That looked terrible, though, so changed it to 1048x768 (from memory) and it is good enough, though not perfect. I may be able to get closer with further tweaking. Now the last, and most important, hurdle to leap: How do I get Remix OS, and more specifically my AFL app, to know I'm in Australia. Frustration. It's taken about ten days, on and off, to get here and still not quite where I want to be, but hopefully my travails can help someone else along the way ...)
Gave up on it. If anyone comes up with a way of running Remix OS in Virtualbox and setting the location, please post. Guestadditions would probably fix it and maybe one day ROS will be compatible with it.
On the other hand, I did learn a lot more about Android than I cared to know, but am now thinking about buying my first ever Android tablet to do the job with a USB/HDMI adapter.
[FONT="<font><font>Lucida Sans Unicode</font></font>"]Hi all users remix I will present to you today as I was using for two days in his last remix version on my laptop with the following characteristics:
TOSHIBA NB250-108
Intel® Atom ™ N455 processor
ddr3 ram 2gb
Intel® Graphics Media Accelerator 3150 (256mb)
open gl 2.0
I say this after beginning...
I use windows 7 without any problem from there 3.0.102 remix install the hard disk on another partition, was fast, start well, I gave me choose my WiFi connection but not detect anything even though it was activated.
okay
no problem, sure to restart may recognize my wifi and so was ... well it works well, not as fast as its main competitor, phoenix you, but not as fluid goes well, native apps are good, your file manager does not have option to extract compressed files, but only touches download an app for that ... ok let's start with the good things about this version:
It works faster than version 2.0 ...
store and play alternative app store
It is rooted
all applications work smoothly
detects all partitions
we now for the things that must be corrected:
problems with the WiFi that spend an hour or a little more begins to fail, disconnect and try to connect again and does not, after several attempts just says error wifi connection and no problem with my wifi in my phone does not happen and is the same wifi I have in my house.
the file browser is missing extract compressed files.
many crashes, when using the system and do many things like download any app, play games, listen to music or do something in Word hangs and returns to CRGAR the system.
also freezes playing restart the computer.
when the computer is asleep after resume does not react more, it turns but is completely frozen.
besides that he needs more fluidity.
mapping the full screen key does not fit well because of the lower task bar.
but that is only corrected manually adjusting the size of the games.
You can not be installed launchers and assume that android is customizable.
change those icons so ugly: P
some games run smoothly but many do not work.
examples:
baseball superstar 2013
Zenonia 5
ZENONIA S
candy crush and all games dl same developer
battle camp
demon souls ... the list is longer but are just a few examples.
I hope to do more compatible with those games.
jetpack joyride also runs slow and that in phoennix will operate normally.
I do this because I work with system installation and I would like to install this system to my clients and do not have many problems and they can do their jobs, watch videos, play and do everything smoothly.
so users expand this excellent system. jide thank for this, I hope I read and take into account.
and the laptop that I use is very, very common where I live.[/FONT]
Why I'm getting stuck on setup wizard in RemixOS 3.0 ??
Sent from my ONE E1003 using XDA-Developers mobile app
I also installed the new marshmallow update on my 2015 Dell Xps 13 with the touch screen. Wifi is non existent. The system looks promising, but without wifi I'm not going to even give it a try.
You know...I am getting tired of this stupid linux/open source/remixos driver situation. I mean...it's 2016. Are we still having trouble with a god damn wifi? The wifi dongle is such a ubiquitous tool. We have wifi everywhere - but no, we don't have drivers for them. Seriously? Do we even *need* drivers for such a simple device? And then graphics. Of course, graphics. NVidia launches the Pascal architecture, AMD launches the 400 series - but wait, we are on linux or a futile linux hack called remixos. We don't get access to all that. We need opensource drivers.
What in the name of sweet baby jezus is all this crap? We have PCs for over 60 years folks. 60 god damn years. And we still lack basic boilerplate drivers like graphics and wifi? See? This is exactly why I don't bother with hacks like remix os or linux. Yes, I am including linux here because no hardware vendor supports it properly. Hell, I could extend this to the whole open source ecosystem. I don't use that. I don't want that. I want supported devices.
I am tired of browsing forums to help me get my god damn wifi or printer working. It's been 60 years of personal computing folks, we deserve better. That's exactly why I am ranting and will always rant about this. And for sure I will get a chromebox when android play store comes to chrome os and will say goodbye to PCs forever. Remix OS for PC - what a god damn joke. If it's for PCs, make it actually run on PCs.
.....
Jide moderator????????????
Update fix estable version
i need help
Hello, everyone!
So as we all know, any developments to do with the Yoga Book seem to be very slow.
Considering a decent number of us have experimented with the Yoga Book, I thought it'd be a good idea to make a centralised place for methods that have worked for people, so we can all have a go and hopefully obtain similar results.
So the idea would hopefully end up being something along the lines of my Megathread (which is now in General).
I guess this is where I get the ball rolling...
Most Promising Leads for Installing Android (1/12/17)
I have tried to install Bliss OS, but with not much luck. Once you get passed the GRUB screen it says there was an emergency error of some kind and reboots the device.
https://forum.xda-developers.com/android/software/x86-bliss-x86-pc-s-t3534657
I found that his updated installer (v25.0004) doesn't work at all, but the latest version from the original developer worked fine, linked below:
https://forum.xda-developers.com/android/software/winapp-android-x86-installer-uefi-t3222483
I followed the following methods, all which resulted in a failed attempt, but the one with the most success was the first one:
- Easy install for Bliss-x86 UEFI/ESP
- For Bliss-x86 USB based installs
- Custom install for Bliss-x86 UEFI/ESP
My next attempt will be with Phoenix OS.
OLD INFO (as of 1/12/17)
Edit: I managed to replicate my situation twice. So I now have a method. Will post more info soon.
Okay... so if you want to get into Remix OS (knowing it's only temporary), here's how to replicate what I did. But make sure you have the following tools:
- USB keyboard & microUSB to USB adaptor (for the keyboard)
- Remix OS (I'm using the 64-bit version)
- A bit of time
What I did:
- Install Remix OS (doesn't matter what size you choose; 8, 16 or 32) on your C: Drive (main Local Disk) with the bundled installer
- Reboot when it finishes (via the dialog box, don't reboot any other way... it won't work properly)
- Give it about 10-15 minutes on the first boot. It'll be "stuck" at this Android-looking thing (mine's all glitched up and stuff)
- When it's done it'll show a black screen, and the Pencil icon to switch the Halo Keyboard on/off will stop turning on&off, it'll instead just stay on 100% of the time
- Reboot again, again choosing to boot into Remix OS
- As soon as you choose Remix OS, you NEED to hold the escape (ESC) key!!! If you don't do this, you'll have to start from scratch
- If you did it right, it'll come up with a couple lines of code, and then after a couple second it'll say "ANDROID" underneath the code, and everything will load up
- Everything should be in portrait-mode, but you should have no graphical glitches now, and should see the setup screen
- The touch-screen still shouldn't work here, you need to use the keyboard to navigate through the setup. If the Wi-Fi bit isn't connecting properly, do that later (just skip that step, up the top right). I left Google Play Services enabled, it doesn't matter, it won't ask for your information unless you open a Google App.
- When you finish the installation, everything should work (except the Halo Keyboard of course)
- To make Remix OS take up the whole screen instead of just the middle... go to the Settings App -> Remix OS Settings (whatever the top one is) -> Always show landscape thingo, toggling this off will make it use the whole screen instead of that little square in the middle.
This is far as I've gotten. I've tried getting USB Debugging to work, but it doesn't want to work. Bluetooth doesn't work for me, nor does changing the brightness. I wouldn't lock the tablet either, sometimes that doesn't work. Also don't try use the Google Play Store, because when you finish entering your information, it'll likely crash and you'll have to start over again. Rebooting will reset everything.
OLD INFO (as of 30/03/17)
I've had some random luck (as told in my recent post, I'll quote it here) with Remix OS.
I had a minor breakthrough last night. I don't know how I managed it though.
So Remix OS has an installer application you can run from within Windows. I used that, then rebooted into Remix OS. The first boot was met with just lots of graphical errors, but when I rebooted again into Remix OS, it booted perfectly. Android was running smoothly, everything worked (the touch screen, Wi-Fi, etc. - but not the Halo Keyboard). However, when I rebooted again, it stopped working. I was not able to successfully replicate that again - even with many re-installations of Remix OS.
I'll continue to mess with it, but if anyone has Windows and wants to attempt getting Android on it, this may be a viable method they can try. But of course, it's not perfect so don't do anything you don't know how to do just yet.
Click to expand...
Click to collapse
Somehow I managed to get it working, but only temporarily.
If I'm able to replicate this situation again, I may be able to install the Stock ROM alongside Windows 10. However, I don't have all the time in the world, so this may take a long while.
General Yoga Book Information:
To my knowledge, there are two versions of the Yoga Book, each with two sub-versions for the OS:
1.) YB1-X9aF - this is the Wi-Fi version
2.) YB1-X9aL - this is the LTE/4G version
Where the "a" between the 9 and the F/L is either a zero or a one, depending on the installed OS (Android: 0, Windows 10: 1)
The SIM card is a Nano-SIM with 3G capability.
Other than that, all Yoga Book devices share the following specifications:
- 10.1 inch IPS display, of resolution 1920x1200
- Intel Atom x5-Z8550 processor, which:
----+ Has an architecture of x86_64 (ie. 64-bit)
----+ Core base clock of 1.44 gigahertz
----+ Core boost clock of 2.4 gigahertz
----+ 4 cores and 4 threads
- Battery capacity of 8500 milliampere hours
- On-board storage of 64 gigabytes of solid-state storage (SSD)
- 4 gigabytes of random-access memory (RAM)
- A microSD card slot capable of up to 128 gigabytes of storage
- Two camera's, one above the display and one on the keyboard
- Wi-Fi (802.11 ac) and Bluetooth (v4)
- 3.5 millimetre headphone jack
- Micro-USB 2.0 OTG port
- Micro-HDMI port
Any information I put about my experience will be with the YB1-X91F version (aka Windows 10 Wi-Fi)
Dual OS or Switching the pre-installed one:
I have attempted getting Android on my Yoga Book, and completely deleting everything Windows. This has obviously not gone very well for me.
Version's I've tried:
- Android x86 6.0-r1
- Android x86_64 6.0-r1
- Android x86 6.0 20160129
- Android Nougat x86 20160902
- Android 4.2.2-r1 "ia3-core mesa-userdebug"
- Remix OS (32 & 64-bit)
The one I personally have had the most success with (by that I mean I've gotten it to display the Android set-up screen with no touch-input) is the 32-bit version of 6.0-r1 (so the first one on my list above).
Other OS's that I've tried/succeeded in running:
- GParted Live 0.28.1-2 i686 (although, the whole screen is in portrait mode)
- Ubuntu 16.10 Desktop (amd64 - so it obviously didn't work)
- Windows 10 with AMIDuOS on-top (honestly wasn't that great)
Currently testing:
- Windows 10 with BlueStacks on-top
TLDR:
If you're on the Windows 10 version of the Yoga Book, I cannot recommend attempting to install Android on it (even with a dual-boot) at this current time. This will probably change if x86 Android update their ROM/Image, though.
I'm currently testing the practicality of putting BlueStacks on-top of Windows 10, which is a player that allows you to run Android apps. The only thing I'm keeping an eye on is battery life (since it'll be doing background tasks for Windows AND Android). However, you will at least have full functionality - especially with the Halo Keyboard.
Ehh... BlueStacks isn't that great after all. Personally I'd stick with Windows apps if you need something like that.
I will add more info and links later on, I just wanted to get this out before hitting the hay. Australia's time difference sucks.
AmiDuOS works for me but the keyboard language cannot be changed somehow.
nan0s7 said:
Hello, everyone!
So as we all know, any developments to do with the Yoga Book seem to be very slow.
Considering a decent number of us have experimented with the Yoga Book, I thought it'd be a good idea to make a centralised place for methods that have worked for people, so we can all have a go and hopefully obtain similar results.
So the idea would hopefully end up being something along the lines of my Megathread (which is now in General).
I guess this is where I get the ball rolling...
General Yoga Book Information:
To my knowledge, there are two versions of the Yoga Book, each with two sub-versions for the OS:
1.) YB1-X9aF - this is the Wi-Fi version
2.) YB1-X9aL - this is the LTE/4G version
Where the "a" between the 9 and the F/L is either a zero or a one, depending on the installed OS (Android: 0, Windows 10: 1)
Any information I put about my experience will be with the YB1-X91F version (aka Windows 10 Wi-Fi)
Dual OS or Switching the pre-installed one:
I have attempted getting Android on my Yoga Book, and completely deleting everything Windows. This has obviously not gone very well for me.
Version's I've tried:
- Android x86 6.0-r1
- Android x86_64 6.0-r1
- Android x86 6.0 20160129
- Android Nougat x86 20160902
- Android 4.2.2-r1 "ia3-core mesa-userdebug"
- Remix OS (32 & 64-bit)
The one I personally have had the most success with (by that I mean I've gotten it to display the Android set-up screen with no touch-input) is the 32-bit version of 6.0-r1 (so the first one on my list above).
Other OS's that I've tried/succeeded in running:
- GParted Live 0.28.1-2 i686 (although, the whole screen is in portrait mode)
- Ubuntu 16.10 Desktop (amd64 - so it obviously didn't work)
Currently testing:
- Windows 10 with AMIDuOS on-top
TLDR:
If you're on the Windows 10 version of the Yoga Book, I cannot recommend attempting to install Android on it (even with a dual-boot) at this current time. This will probably change if x86 Android update their ROM/Image, though.
I'm currently testing the practicality of putting AMIDuOS on-top of Windows 10, which will be like having an app that just runs Android. The only thing I'm keeping an eye on is battery life (since it'll be doing background tasks for Windows AND Android). However, you will at least have full functionality - especially with the Halo Keyboard.
I will add more info and links later on, I just wanted to get this out before hitting the hay. Australia's time difference sucks.
Click to expand...
Click to collapse
deepsync said:
AmiDuOS works for me but the keyboard language cannot be changed somehow.
Click to expand...
Click to collapse
Have you tried different keyboard apps?
Well on screen keyboard works fine. I just can't change the key mappings of the Halo keyboard to my German keyboard. English may work as that seems to be the default.
deepsync said:
Well on screen keyboard works fine. I just can't change the key mappings of the Halo keyboard to my German keyboard. English may work as that seems to be the default.
Click to expand...
Click to collapse
Hmm you're right. I've tried switching to a Polish keyboard in AMIDuOS, and it doesn't work at all. Although I didn't try switching the keyboard language in Windows, and then using AMIDuOS. I'm kind of optimistic that that method may work, so possibly give that a try if you haven't yet?
Are you gonna try again if you can get your hands on Lenovo's stock Yoga Book ROM?
sawyerbenjamin said:
Are you gonna try again if you can get your hands on Lenovo's stock Yoga Book ROM?
Click to expand...
Click to collapse
I do actually have a copy of the stock ROM, but not in a format I can put on the Yoga Book without the Android bootloader installed. The versions of Android I tested were ones that include the files for the bootloader and such, but they didn't want to work properly.
If something new comes up, or I get another idea, I will for sure try again. I prefer to use Android over Windows, any day.
I had a minor breakthrough last night. I don't know how I managed it though.
So Remix OS has an installer application you can run from within Windows. I used that, then rebooted into Remix OS. The first boot was met with just lots of graphical errors, but when I rebooted again into Remix OS, it booted perfectly. Android was running smoothly, everything worked (the touch screen, Wi-Fi, etc. - but not the Halo Keyboard). However, when I rebooted again, it stopped working. I was not able to successfully replicate that again - even with many re-installations of Remix OS.
I'll continue to mess with it, but if anyone has Windows and wants to attempt getting Android on it, this may be a viable method they can try. But of course, it's not perfect so don't do anything you don't know how to do just yet.
nan0s7 said:
However, when I rebooted again, it stopped working. I was not able to successfully replicate that again - even with many re-installations of Remix OS.
Click to expand...
Click to collapse
Why so much headache? If you are having the Windows Version how often do you really miss Android? What Apps are not present under Windows? I am absolutely not a gamer, that's probably why I don't really have the need for Android... Anyhow, why installing Remix OS and risking to mess up with the Bootloader? I tried NOX Player and KO Player. The last one works very smooth on an Atom Processor. KO Player even let you go Fullscreen. Everything works out off the box as it's just a layer, Halo Keyboard, Pen, just all works and pretty decent. Many low equipped Android Tablets perform slower...
jamespmi said:
Why so much headache? If you are having the Windows Version how often do you really miss Android? What Apps are not present under Windows? I am absolutely not a gamer, that's probably why I don't really have the need for Android... Anyhow, why installing Remix OS and risking to mess up with the Bootloader? I tried NOX Player and KO Player. The last one works very smooth on an Atom Processor. KO Player even let you go Fullscreen. Everything works out off the box as it's just a layer, Halo Keyboard, Pen, just all works and pretty decent. Many low equipped Android Tablets perform slower...
Click to expand...
Click to collapse
I've got Windows machines all around me. Which is... tolerable. But it's more that I just enjoy having Android on my device, and I do really enjoy messing with tech. I've gotten so close to getting Android on my tablet, it's just a project to really satisfy my time with. Plus, with Android I have more control over everything
nan0s7 said:
I've gotten so close to getting Android on my tablet, it's just a project to really satisfy my time with. Plus, with Android I have more control over everything
Click to expand...
Click to collapse
As a techie achievement I totally understand. But I doubt you will get all the drivers working properly. Halo Keyboard, Wacom & AnyPen for example. But good luck... On the other hand I have to insist: Windows gives you more control over everything... lol...
jamespmi said:
As a techie achievement I totally understand. But I doubt you will get all the drivers working properly. Halo Keyboard, Wacom & AnyPen for example. But good luck... On the other hand I have to insist: Windows gives you more control over everything... lol...
Click to expand...
Click to collapse
Once I get some sort of Android on it, that will allow me to flash a ROM that has all the drivers in it. And it depends what you define control as...
nan0s7 said:
Once I get some sort of Android on it, that will allow me to flash a ROM that has all the drivers in it. And it depends what you define control as...
Click to expand...
Click to collapse
Hey dude,
It looks like this thread hasn't had a great deal of attention lately, which is kinda sad. I figured it would be a really tricky endeavour anyway.
Anywho, just letting you know that if you do ever figure this out, there's one chick in Australia whom will owe you her eternal thanks.
Seriously, I tried to Remix, I tried to x86, but all it got me was a trip to Harvey Norman and a 2-5 week waiting period to get my book back. If you get a flashable Android ROM for this thing you will be my favourite person in the whole world ever. :laugh:
Melliejoy said:
Hey dude,
It looks like this thread hasn't had a great deal of attention lately, which is kinda sad. I figured it would be a really tricky endeavour anyway.
Anywho, just letting you know that if you do ever figure this out, there's one chick in Australia whom will owe you her eternal thanks.
Seriously, I tried to Remix, I tried to x86, but all it got me was a trip to Harvey Norman and a 2-5 week waiting period to get my book back. If you get a flashable Android ROM for this thing you will be my favourite person in the whole world ever. :laugh:
Click to expand...
Click to collapse
Haha damn sounds like a.... fun time
But yeah, there hasn't been much progress. I mean you could always run an emulator on-top of Windows if you NEED an Android tablet.
nan0s7 said:
Haha damn sounds like a.... fun time
But yeah, there hasn't been much progress. I mean you could always run an emulator on-top of Windows if you NEED an Android tablet.
Click to expand...
Click to collapse
I didn't NEED Android until I discovered Freeview FV, so I could watch Highway Patrol without taking the TV from my hubby. Between that and the few apps I use for D&D, I'm sort of regretting going with the Windows version.
I can't really do anything until I get it back, anyway. The furthest I got was successfully installing Remix, but it wouldn't accept any external input when trying to select it from the boot menu. I guess I could use an emu, but it's not as good as the real thing.
Melliejoy said:
I didn't NEED Android until I discovered Freeview FV, so I could watch Highway Patrol without taking the TV from my hubby. Between that and the few apps I use for D&D, I'm sort of regretting going with the Windows version.
I can't really do anything until I get it back, anyway. The furthest I got was successfully installing Remix, but it wouldn't accept any external input when trying to select it from the boot menu. I guess I could use an emu, but it's not as good as the real thing.
Click to expand...
Click to collapse
Yeah I wish I had gotten the Android version, but I got mine for a reduced price... so I can't complain too much ;P
Yeah... none of the emus are perfect anyway. I'm hoping that a new version of x86 Android or Remix OS will allow me to get ADB to work, so I can then flash Android. But I'm not holding my breath for that.
Any recent experimenting with Remix? Im about to download it and see what I can gather. Too bad there's about zero android devs on this thing. Im sure a custom Kernel under RemixOS would be fix most of its problems.
sawyerbenjamin said:
Any recent experimenting with Remix? Im about to download it and see what I can gather. Too bad there's about zero android devs on this thing. Im sure a custom Kernel under RemixOS would be fix most of its problems.
Click to expand...
Click to collapse
Nah I haven't done anything recently. But if you're having trouble getting things booted use my method (assuming it still works now) and I guess see what you can do
nan0s7 said:
I do actually have a copy of the stock ROM, but not in a format I can put on the Yoga Book without the Android bootloader installed. The versions of Android I tested were ones that include the files for the bootloader and such, but they didn't want to work properly.
If something new comes up, or I get another idea, I will for sure try again. I prefer to use Android over Windows, any day.
Click to expand...
Click to collapse
Is your stock ROM for YB1-X90F or YB1-X90L?
ljbha007 said:
Is your stock ROM for YB1-X90F or YB1-X90L?
Click to expand...
Click to collapse
I have both. Got them from easy-firmware (had to pay for the X90F version).
They're not "ROMS" so much as they are just a way to replace Android with this particular version. So it comes with all the .img files for each partition you'd normally see (system, boot, etc.) and some scripts to use with the Intel flasher program thingo.