Hello, I've unlocked the bootloader of my HTC one x+ and flashed CWM recovery. After that I downloaded cyanogenmod 11, 12.1, carbon 5.1.1 ROM. After flashing the zip file of the ROM and installing Gapps and wiping of cache, user data and dalvik cache I reboot the phone, and now the phone is stuck at the boot animation of the respective ROM. Tried flashing multiple times but to no avail.
Please help.
After flashing the zip file of the ROM and installing Gapps and wiping of cache, user data and dalvik cache Flash kernel (boot.img)
eduardoviseu said:
After flashing the zip file of the ROM and installing Gapps and wiping of cache, user data and dalvik cache Flash kernel (boot.img)
Click to expand...
Click to collapse
I downloaded the kernel source files but can't make out how to build boot.img. How do I get that?
eduardoviseu said:
After flashing the zip file of the ROM and installing Gapps and wiping of cache, user data and dalvik cache Flash kernel (boot.img)
Click to expand...
Click to collapse
I found it in the ROM.zip It's successfully booted into cyanogenmod. Thanks.
Related
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
hi,
so i have htc flyer, unlocked bootloader, have CWM recovery, S-ON and trying to install custom rom
have tried installing through CWM and flash boot boot.img, nothing
wiped cache and data and dalvik... pls help
thnx in advance
did you found out how to resolve it?
noob403 said:
did you found out how to resolve it?
Click to expand...
Click to collapse
not yet
techknewz1 said:
hi,
so i have htc flyer, unlocked bootloader, have CWM recovery, S-ON and trying to install custom rom
have tried installing through CWM and flash boot boot.img, nothing
wiped cache and data and dalvik... pls help
thnx in advance
Click to expand...
Click to collapse
Flash the boot.img first. Stay in bootloader then go to recovery, full wipe, i.e factory data reset, cache, dalvik cache, then format system. After this install yr rom when finish installing wipe cache and dalvik cache again, reboot.
ndmuni said:
Flash the boot.img first.
Click to expand...
Click to collapse
You have to flash boot.img using fastboot, to clarify.
I've tried to flash many roms but it always gets stuck on boot I have been waitingssince 3hours and it is not starting what should I do? I have performed the following Steps
1)wipe data, cache and delvik cache
2)flashed cm11
3)flashed gapps
4)reeboted system.
I am using cwm recovery plsss help ?
Rishi27100 said:
I've tried to flash many roms but it always gets stuck on boot I have been waitingssince 3hours and it is not starting what should I do? I have performed the following Steps
1)wipe data, cache and delvik cache
2)flashed cm11
3)flashed gapps
4)reeboted system.
I am using cwm recovery plsss help ?
Click to expand...
Click to collapse
FLASH THE FCUING KERNEL!!!!!! DO YOU PEOPLE NOT READ?!?!
i have a nandroid backup of boot,system,data on my sd card,by mistake i formatted my internal storage now when i restored my backup i am getting boot loops plz help
Wipe system, data, cache & dalvik cache then restore the backup.
Joshwin Aranha said:
Wipe system, data, cache & dalvik cache then restore the backup.
Click to expand...
Click to collapse
I did that
after restoring it boots than a black screen appears where only power button works.
i can boot into my twrp from there if i flash stock rom will it work ?
or will i have to flash stock recovery before flashing stock rom ?
W!ld said:
i can boot into my twrp from there if i flash stock rom will it work ?
or will i have to flash stock recovery before flashing stock rom ?
Click to expand...
Click to collapse
Stock Recovery - Download
Stock ROM - Download
Source - Here
Instructions:
1. Download both the ROM & Recovery
2. Flash the OnePlus Recovery by fastboot
3. Copy the ROM to your Device
4. Boot into OnePlus Recovery
5. Selct English Language, then Install from Local, Find the ROMs zip file, and select it.
6. Flashing will begin, after it completes, reboot the device if it does not automatically reboot.
7. Profit
Edit - After this, you can flash back TWRP again.
Joshwin Aranha said:
Stock Recovery - Download
Stock ROM - Download
Source - Here
Instructions:
1. Download both the ROM & Recovery
2. Flash the OnePlus Recovery by fastboot
3. Copy the ROM to your Device
4. Boot into OnePlus Recovery
5. Selct English Language, then Install from Local, Find the ROMs zip file, and select it.
6. Flashing will begin, after it completes, reboot the device if it does not automatically reboot.
7. Profit
Edit - After this, you can flash back TWRP again.
Click to expand...
Click to collapse
thanks a lot!
can't i directly flash stock rom from twrp instead of flashing stock recovery?
W!ld said:
thanks a lot!
can't i directly flash stock rom from twrp instead of flashing stock recovery?
Click to expand...
Click to collapse
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Joshwin Aranha said:
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Click to expand...
Click to collapse
Thanks a lot !!
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
Joshwin Aranha said:
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Click to expand...
Click to collapse
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
W!ld said:
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
Click to expand...
Click to collapse
Thats strange, did you flash anything else with the ROM ? Any mods etc ?
Are you sure your data, cache & system partitions are in ext4 filesystems ?
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
Joshwin Aranha said:
Thats strange, did you flash anything else with the ROM ? Any mods etc ?
Are you sure your data, cache & system partitions are in ext4 filesystems ?
Click to expand...
Click to collapse
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
W!ld said:
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
Click to expand...
Click to collapse
Thats the problem LoL, convert /data & /cache to ext4 again, then do a full wipe again, then flash the ROM, then when it completes, wipe cache & dalvik & reboot.
Joshwin Aranha said:
Thats the problem LoL, convert /data & /cache to ext4 again, then do a full wipe again, then flash the ROM, then when it completes, wipe cache & dalvik & reboot.
Click to expand...
Click to collapse
i have checked data system cache all are ext4.
flashed once again still in boot loop.
this is scary now please help.
W!ld said:
i have checked data system cache all are ext4.
flashed once again still in boot loop.
this is scary now please help.
Click to expand...
Click to collapse
Can you post screenshots of your data, system & cache being ext4 ?
Also, when you're flashing this ROM, dont flash anything else, Nothing at all, only this 800MB zip package.
Edit - Use TWRP for all this.
Joshwin Aranha said:
Can you post screenshots of your data, system & cache being ext4 ?
Also, when you're flashing this ROM, dont flash anything else, Nothing at all, only this 800MB zip package.
Edit - Use TWRP for all this.
Click to expand...
Click to collapse
could it be due to boot.img or something..
ya psoting screenshots 1 min
W!ld said:
could it be due to boot.img or something..
ya psoting screenshots 1 min
Click to expand...
Click to collapse
Are there any errors during the Flashing of ROM package ?
Joshwin Aranha said:
Are there any errors during the Flashing of ROM package ?
Click to expand...
Click to collapse
no errors
Joshwin Aranha said:
Are there any errors during the Flashing of ROM package ?
Click to expand...
Click to collapse
2 of above screenshot is of internal storage state
I wiped dalvik cache, cache, data, vendor & data.
then i flashed rom & pico gapps
what did i do wrong ? or what should i do now ?
You shouldn't have wiped the vendor
Now to solve that you must flash the stock ROM which will restore the vendor and then flash the twrp image
and then wipe dalvik cache, cache, and data but not vendor
then flash the boot img and the rom
but after all this the phone will still won't start
so after flashing the boot img and rom and other files with the rom ,
clear the data,dalvik cache, cache and internal storage
after all this your realme 3 pro will start
I had faced same problem and all the steps are tried and tested by me personally