Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser or SuperSU at least 2.16, no less.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip or SuperSU on your SDCARD. Remember: only one is good. DO NOT FLASH BOTH. Flash the one you like.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 or the newest one TWRP 2.8.4.0 rev 2 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119 or SP_Flash_Tool_v5.1352.01. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum in SP Flash Tool v3. In SP Flash Tool v 5 dont need. They are allready selected. Recovery.img should appear checked.
10.1. I have updated the post with some custom scatter files for 4GB and 8GB Firmware. Iff you get diferent errors when you flash the recovery file use this custom scatter files.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Then boot directly to recovery your phone by pressing power with vol + and vol - butons together. Not Optional!
15. From TWRP flash Superuser.zip or SuperSU 2.xx. SuperSU is fixed. Works fine now.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Update:
I have uploaded TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 226 and 227 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780
SP Flash Tool_v.3 and v.5
stympy said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have the latest FlashTool.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Click to expand...
Click to collapse
This method did not work i got this error
"pmt changed for the rom it must be downloaded"
astrokid1993 said:
This method did not work i got this error
"pmt changed for the rom it must be downloaded"
Click to expand...
Click to collapse
Try to use Firmware Upgrade buton.
Or: You need to edit the file MT6589_Android_scatter_emmc.txt section USRDATA 0x48d80000 on USRDATA 0x58980000.
Waiting for feedback.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Point no 12 doesn't work with me, Anything I should know?
asambe2dumb said:
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Point no 12 doesn't work with me, Anything I should know?
Click to expand...
Click to collapse
If the 12 point doesn't work it means that you don't have the driver installed or installed correctly. Check the drivers.
Sent from my Lenovo P780 using XDA Free mobile app
all steps are done but not succsses
Hallo... IN my lenovo p780 with officaly updated android 4.4.2 and not rooted phone .I fallow all steps carrectly as u discribed after press download button when I connect my switched off phone I got mtp error than I edit scatter file user data as describe in comment section after that I press download and connect my p780 switched of all process done smuthaly I got green circles that's mean I am done after that I switched on phone and switched off phone for boot in recovery I press vol+ vol- and power buttons but their is not twrp recovery option ..only stock recovery option .
Pls help bro ...what I am doing wrong?. Or any other way to do this ?
Thanks for this wonderful tutorial.
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder  )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback. 
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Sent from my Lenovo P780 using XDA Free mobile app
I have not rooted lenovo p780 official updated to android 4.4.2 s221 OK I want root my phone I try every thing like pharma root. One click root ;rescue root;vroot ;kingoroot;and many other which I don't remember but not success ..OK than I try to follow your method ...first when I connect my switched off phone downloading process start after red bar complete I got mtp error
Then I edit scatter file user data section as u mansion in comments sections after that download has done withouts error I got green circle that's mean I am done ... OK I disconnect phone from computer and power on than switched off for boot in recovery ... I press power button + vol up and down together but their is ...
NOT TWRP RECOVERY .. only stock android recovery huuh what I do now ..where I am wrong any suggestion plz help
And thanks for this wonder full tutorial.
pu04 said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder  )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback. 
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Sent from my Lenovo P780 using XDA Free mobile app
I have not rooted lenovo p780 official updated to android 4.4.2 s221 OK I want root my phone I try every thing like pharma root. One click root ;rescue root;vroot ;kingoroot;and many other which I don't remember but not success ..OK than I try to follow your method ...first when I connect my switched off phone downloading process start after red bar complete I got mtp error
Then I edit scatter file user data section as u mansion in comments sections after that download has done withouts error I got green circle that's mean I am done ... OK I disconnect phone from computer and power on than switched off for boot in recovery ... I press power button + vol up and down together but their is ...
NOT TWRP RECOVERY .. only stock android recovery huuh what I do now ..where I am wrong any suggestion plz help
And thanks for this wonder full tutorial.
Click to expand...
Click to collapse
By any chance is your phone made in 2014 ?
Then if it is use preloader. Check preloader and try this one.
Its one year old phone ..with jelly bin 4.2.2 now I updated to 4.4.4 originally by ota ..I want to root it actually in mtk toot its show this massage `` ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
I don't know but I think its affect ..can u pls explain it what's this mean.
Thanks for reply ...I try with bootloder next day
Sent from my Lenovo P780 using XDA Free mobile app
Will it work on S214 also or should i instal S221 for my phone
astrokid1993 said:
Will it work on S214 also or should i instal S221 for my phone
Click to expand...
Click to collapse
For me worked on both.
Sent from my Lenovo P780
Thanksgiving
OK....FIRST I HEARTILY THANKS TO U ..NOW I AM SUCCESS ..finally rooted my lenovo p780 4.4.2 KitKat updated phone ..without any error or bricking my phone .. Thanks for this wonder full tutorial ..
As I mentioned previous reply that I got error from Sp flash tool ..something pmt error ..than as u sugest i edit user data section in scatter data section and flash it ..but nothing happen their is only stock recovery .. Today i retry process ..
1- follow all steps as it is
2 - for pmt error change user data section 3- at last u advise that power on phone then reboot in recovery by pressing volume+'- +power button at this stage ..what I have done ..is
I don't on my phone ..after flashing recovery I direct go to recovery using power + volume up+ volume down ..and waaaala here is done I got twrp custom recovery .. But don't flase superuser .zip just shutdown phone and on go to normal mode and check every thing is fine ..now power off go to recovery ...there is twrp present ..in recovery install super user ..just unchake verify check mark its install without any error ..and ..GOT ROOTED ..
Conclusion - why I unsuccessful in first time I don't know but think..I have this type of file .. File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found! I think its prevent twrp when I normally switch on phone ..so this time I don't on phone go to direct recovery and all is done .. I got custom recovery..
AT last I thank you again for this great tut. Its worked for me finally .
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Click to expand...
Click to collapse
Friend, first time I follow all your steps to install TWRP , but it failed . And I see your reply in this thread and change the USR DATA . But it failed again , MY PHONE WAS BRICKED !!!!! IT DONT DO ANY RESPONSE , CANT POWER ON , CANT CONNECT TO COMPUTER , CANT GO TO RECOVERY . IT ONLY SHOW A RED LIGHT WHEN CHARGING . HOW TO SOLVE THIS PROBLEM ??? PLEASE HELP ME ...
stympy said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Click to expand...
Click to collapse
Not working at all for me i did everything correctly till point 11 when i connect my phone as in point 12 my phone starts charging and nothing is getting detected in the sp flash tool.
Any one please help me with my problem
tngultimate said:
Friend, first time I follow all your steps to install TWRP , but it failed . And I see your reply in this thread and change the USR DATA . But it failed again , MY PHONE WAS BRICKED !!!!! IT DONT DO ANY RESPONSE , CANT POWER ON , CANT CONNECT TO COMPUTER , CANT GO TO RECOVERY . IT ONLY SHOW A RED LIGHT WHEN CHARGING . HOW TO SOLVE THIS PROBLEM ??? PLEASE HELP ME ...
Click to expand...
Click to collapse
Your phone seems to be produced in 2014. For this phones must do this:
1. Must flash with another preloader.
Look for this ROM : P780_S136_140306_Lang.7z
Flash this Rom then OTA update.
Then tell me if it works.
Sent from my Lenovo P780
astrokid1993 said:
Not working at all for me i did everything correctly till point 11 when i connect my phone as in point 12 my phone starts charging and nothing is getting detected in the sp flash tool.
Any one please help me with my problem
Click to expand...
Click to collapse
Did you installed the drivers?
Did you presed the firmware upgrade first and then plugged the phone?
Update
Try this:
Press Download and open the case of your phone and press the little red buton for 2 seconds.
Sent from my Lenovo P780
stympy said:
Did you installed the drivers?
Did you presed the firmware upgrade first and them plugged the phone?
Sent from my Lenovo P780
Click to expand...
Click to collapse
I installed driver already... My phone now cant do anything... Help me please ...
tngultimate said:
I installed driver already... My phone now cant do anything... Help me please ...
Click to expand...
Click to collapse
Hi.
Do not panic. Your phone is just soft bricked.
Here is the link to download what you must flash first:
https://drive.google.com/folderview?id=0B2ORIgaV4iacT01mTm5JVzFuRGs&usp=sharing
And now here's a little tutorial how to save your phone. You should respectit exactly.
Step by step you will do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
-Lets consider that you have downloadet the firmware
1. Unpack ROM, and Click on Flash_tool.exe
2. Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
3. Wait file to be added into Flash Tool
4. Choose Options->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
5. Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
6. Check box with DA DL All With Check Sum
7. Turn off your phone - skip this step is allready powered off
8. "Press Firmware->Upgrade "
9. And ONLY NOW connect your phone into the computer via USB data cable.
10. The process will start and a red progress bar will appear after color purple, yellow.
OR
11. If the step 9 dont work open the case of your phone and you will find a red small buton and press it 2 seconds.
12. The process will start and a red progress bar will appear after color purple, yellow.
13. And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
stympy said:
Hi.
Do not panic. Your phone is just soft bricked.
Here is the link to download what you must flash first:
https://drive.google.com/folderview?id=0B2ORIgaV4iacT01mTm5JVzFuRGs&usp=sharing
And now here's a little tutorial how to save your phone. You should respectit exactly.
Step by step you will do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
-Lets consider that you have downloadet the firmware
1. Unpack ROM, and Click on Flash_tool.exe
2. Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
3. Wait file to be added into Flash Tool
4. Choose Options->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
5. Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
6. Check box with DA DL All With Check Sum
7. Turn off your phone - skip this step is allready powered off
8. "Press Firmware->Upgrade "
9. And ONLY NOW connect your phone into the computer via USB data cable.
10. The process will start and a red progress bar will appear after color purple, yellow.
OR
11. If the step 9 dont work open the case of your phone and you will find a red small buton and press it 2 seconds.
12. The process will start and a red progress bar will appear after color purple, yellow.
13. And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
Click to expand...
Click to collapse
Thanks for replying But my phone cant connect to computer... My computer keep saying my phone is malfunction...
tngultimate said:
Thanks for replying But my phone cant connect to computer... My computer keep saying my phone is malfunction...
Click to expand...
Click to collapse
Can you tel me what your computer says more exacly ?
Hi all ,
i'm new.
I have a rooted p4502 (op3ndott)
specs
mtk 6582
1 gb ram
I accidentally deleted the folder "framework" in system partition. The phone crash and when i start it go in boot loop.
i can go in recovery and also i do a data/factory reset, and always boot loop.
i havent did a backup of rom and now i can find the original rom on the web.
What i can do ? it's recuperable ?
(sorry for my english but i'm italian )
please answer
i have same problem :crying:
You must install CWM or TWRP with spflashtool. I install twrp in terminal, I don't now method install it with spflashtool, you must looking in network. I can upload twrp and backup firmware ver 208 and ver 213.
------
1. Install MediaTek DA USB VCOM drivers
2. Download and run SPFlashTool
3. Click Scatter-loading button to load the correct scatter file
4. Deselect all parts except recovery.img, set path to recovery.img
5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
6. Press Download and connect your phone into the computer via USB data cable.
7. The process will start and a red progress bar will appear.After the red progress bar is complete, there will appear a purple progress bar.When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
If you have installed recovery you can install backup. I can upload my backup.
shanti77 said:
You must install CWM or TWRP with spflashtool. I install twrp in terminal, I don't now method install it with spflashtool, you must looking in network. I can upload twrp and backup firmware ver 208 and ver 213.
------
1. Install MediaTek DA USB VCOM drivers
2. Download and run SPFlashTool
3. Click Scatter-loading button to load the correct scatter file
4. Deselect all parts except recovery.img, set path to recovery.img
5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
6. Press Download and connect your phone into the computer via USB data cable.
7. The process will start and a red progress bar will appear.After the red progress bar is complete, there will appear a purple progress bar.When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
If you have installed recovery you can install backup. I can upload my backup.
Click to expand...
Click to collapse
Hi.
I have the original software on my phone without root, i can make this operation ?
thankyou
Good evening,
I installed TWRP with flash tool, it works but missing the OS.
With flash tool i used those files:
logo.bin, lk.bin, MBR, preloader.bin, secro.img, MT6582_Android_scatter.txt, boot.img, recovery.img, system.img
But i don't have any files for:
ebr1, ebr2, cache, usrdata
If someone has got the files or can help me...
Thx you.
Firmware backups(TWRP)
ver208
ver213
Files must be in internal memory(you can copy it from external sd in TWRP)
Path:
/TWRP/BACKUPS/P4502/ver_or_date/files(boot.mmc.win,system.ext4.win ...)
I mean totally dead as in, only the charging light is showing, no android logo, no recovery mode
Files you need
1.ALCATEL OT 918 )ROM BACKUP FROM A WORKING PHONE( MOST IMPORTANT)
https://docs.google.com/uc?id=0B_XoEkOh-LzYM1A2dnZyNko5ajA&export=download
2.MTK USB DRIVER FOR YOUR PHONE
3.SP_Flash Tool v3.1224.00
https://disk.yandex.com/public/?hash=%2BFgTiMPQgqQjcFeH30tIoZnLBEVANGQz3%2BeBBWub5m0%3D
PROCEDURE
2. Install usb drivers and make sure your it works well (by using another identical phone)
3. Run Sp falsh tool and select the alcatel scatter file.
4. Copy all the downloaded files in one folder for easy access.
5.Select and check every item from the ROM BACKUP starting from the preloader,ds pl.....etc.
6. Connect your phone to the computer using the usb cable .PRESS VOLUME + continuously then click download in the sp fash tool.
NOW YOU WILL BE ABLE TO FLASH YOUR ALCATEL.
NB.
After flashing your dead alcatel will boot up .
IF IT HANGS IN THE BOOTLOOP.
1.Flash the CWM BY MARK by running sp flashtool and check recovery only (this allows you to flash clock work mode that will allow you to flash a working OS to your phone.)
2.After a complete flash. Copy ORIGINAL ROM.RAR to sd and Start your phone in recovery (power + volume up)
3.Go to install rom from sd and select ORIGINAL ROM or flash new working rom.
Thank me later
Hi all,
after almost a 3 weeks of tring to update mine K3w lemon to the latest lollipop(052 version) and lot of unbootable roms and lot of error status in all recoveries i finally menaged to update mine phone.
i did it flashing over mine PC.
1. download rom from this link: http://lenovo-forums.ru/topic/14381-lenovo-a6000-a6000-l-s054-150915-8g-row/
2. extract it to desktop
3.download SQL server from Microsoft page and install it
4.in extracted files install Quallcom drivers and restart your PC
5.after reboot in folder sw_tool start QcomDLoader
6. in left cornet select icon load rom from package and select SW folder of extracted page
7.turn off your phone
8.hold vol up button and power button it will start bootloader
9.choose download option on phone screen
10.now conect your phone to pc
11.flashin will start and you will see progress it will stuck couple times but all proces will take abou 400 sec (it will be displayed on pc screen)
12.your phone will reboot and first boot takes about 5 minutus on lenovo logo then will go splash screeen wit lenovo again it will take about 7 more minuts
13.and now your phone is ready to go
I menaged to upadete mine phone this way after tring to flash all version of new roms for A6000(028 and 052) with all recveries (Phils,TWRP,stock) lot of flashin original rom(vibe 025) from mine pc becouse phone didnt boot (that was througt fastboot) i thinked lot of times that it bricked but i DID IT ON this way.
Afere flashing this rom there is stock Lenovo recovery thats working ok .
i had try to find the twrp file for lyf water 7s but i did'nt get i search ..unable to find can anyine tell me plzz how to root lyf water 7s without pc its too hard i use all app or tell root through pc but safe way
Hey Guys,There is a Good News for you all After a long time i have found The way on how to root our phone LYF Water 7s Ls5507{yup you read it right} ? I have ported a TWRP Custom recovery for it [ I know its very long time since no development has been done for our very own device but wait is over now ! ]
Procedure to flash TWRP Recovery and Root
------------------------------------------------------------------------
Follow These Steps:-
1>Download The required Tools pack for flashing the recovery From here-https://drive.google.com/file/d/1Dnq6DwJdLI3lYyLQzgUG3Y_u024EiWEd/view?usp=drivesdk And Super Su v2.82 From here-https://drive.google.com/file/d/1jMjCziMaafiyo3_b0GVlaDZEy1RB1fbb/view?usp=drivesdk
2>Install the MTK drivers for your phone in your Computer (search the Google)
3>Extract the tools pack on your computer and copy the Super Su v2.82.zip to your phone's SD Card
4>And After Extracting tools pack you will get 2 folders Twrp Recovery pack and SP Flash Tool
5>Open SP Flash Tool Folder,Double click Flash Tool.exe
6>Now in SP Flash Tool Click on Scatter Loading Button
7>Now Locate the folder where you have extracted the "Twrp Flashing Pack" Folder open it and select Mtk6753 Android Scatter.txt and click open
8>From the List Choose Recovery and hot the Download Button Above
9>After Clicking "Download" Completely Power off your phone and Connect your phone to Computer using USB Cable and the Tool will start flashing the Recovery image in it
10>After the Flashing Process Completes You will be able to see a green ring,now disconnect the cable and press and hold volume up(+) and power button ,you will see very small words according to them locate recovery option using volume up(+)key and select it using volume down(-)key then after some time the recovery will open.
11>In the recovery draw your pattern or enter your password(if asked)and swipe the bar ,then go to Your sdcard location where you have placed the Super Su v2.82.zip then flash it and reboot your phone(at first boot it may restart 2 times but dont worry its preparing the phone)and when your phone boots up........ Congratulations you have rooted your device successfully !
-------------------------------------------------------------------------
If you liked my work please let me know
Thank you !
Also i will keep updating you all about the latest mods and hacks for the device and for now i m trying to port miui 9 for the device !
So stay tuned !