Hi guys,
I was looking for ROMs on the tablet 465. In the end I found. I install and everything is okay. I do reboot and I get the menu to select the language. I want to change, but in general I can not click because the screen did not respond to touch.
I read a little bit and someone wrote that you need to install the patch, after which everything will be fine and dandy.
I installed the patch, but again ... when I turned on the tablet it's me being shown. Just as if it were a little brighter screen, but nothing else (stupid I installed the patch for other versions ..). I tried to Phoenix Carda and LiveSuit'a, but it did not work.
I had just two smartphones and everything went without a problem, but Yarvikiem I have no idea what to do.
What should I do? : /
Sorry, but i don't perfect english. I speak Polish, and text is translated.
Ok, my last question : How to turn recovery mode?
I find the touch screen fix patch!!!
How to install .zip without pc?
How to convert .zip to .apk?
Hi guys, I want to ask for advice, I unlocked the bootloader, then tried to install the custom recovery but I did not succeed, stock recovery retired, in recent times I locked bootloader! Now I can not unlock the bootloader, because no recovery and can not install recovery locked bootloader
how to be where to start?
Thank you
Related
I followed a tutorial about flashing custom rom on my lww, but after I flashed it, I realized I flashed a Mini Pro rom. The touch only worked on the bottom of the screen. I thought the best thing I could do, was to flash back the stock rom. But when I did it and turned on my phone, the touch screen went dead. I can't unlock my bootloader(11w41), I can't boot up in recovery, I can't do anything. I only found tutorials for unlocked bootloader.
I'm really n00b at rooting and hacking android phones. Please help me!
Sorry for my bad english.
EDIT: I bought an OTG cable, and with mouse I installed CWM, so now I can boot up in recovery.
help me pls!
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hello everyone!
Need some help, I'm totally new to android hacking stuff and think messed up my phone, it's sure an old one but I loved it so much I don't want it to die.
So here's the point, yesterday I rooted it, worked fine, after that I unlocked the bootloader, always fine, but the problems began when I tried installing a custom recovery, didn't find a suitable one for the phone so I found RecoverX, and installed the CWM-Based Recovery 5.0.2.7 (ICS), after it done installing the phone was never able to boot anymore, I got stuck on a bootloop so I was searching for the original firmware, I found one and it worked after that, except the touchscreen was not working, so after reading some threads I realised that I installed a firmware who's not made for my phone version. Then I tried flashtool again and installed the built-in version or don't know what it is just for seing if it was able to restore the firmware since it said "X10". After that the phone turned off and wasn't able to boot anymore, the power button doesn't respond, no vibration, no backlight, no LED, and it isn't detected but the computer anymore, I tried flash mode and all other thing but nothing.
Is it dead? Can't I repair it anymore? Based on some reasearch I think it's hard bricked but can't find a solution.
Please help. Can I repair it by myself by doing some testpoint stuff or I don't know, I'm just too new about this, I just began yesterday.
PS: sorry for my bad english.
Thanks for you answer.
Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.