I just flashed my xperia go to the Power JB 1.5 and followed all steps here http://forum.xda-developers.com/xperia-u/go-development/rom-powerjb-xgo-t2257768
After pressing reboot when I finished doing the installation via aroma, it wont turn on anymore. Tried pressing power+up button, phone vibrates but screen keeps black.
Help please!!!
Related
Hi I'm stuck on safe mode how to disable it??? I have xperia neo v.....please help....
sent from heaven.....
Before we begin, read this: http://www.toytowngermany.com/wiki/Forum_topic_titles
Second, what do you mean by safemode? How did you enter in it?
Turn off the device
Power on
During start up, hold down the menu button as soon as you feel the first vibrate
Continue to hold menu down until phone has completely booted
try to turn your phone off, then take out the battery, then press the power button and hold it for couple of seconds, put the battery back on and turn it on see if it works if it doesnt then
Turn off the device
Power on
During start up, hold down the menu button as soon as you feel the first vibrate
Continue to hold menu down until phone has completely booted
ameer1234567890 said:
Turn off the device
Power on
During start up, hold down the menu button as soon as you feel the first vibrate
Continue to hold menu down until phone has completely booted
try to turn your phone off, then take out the battery, then press the power button and hold it for couple of seconds, put the battery back on and turn it on see if it works if it doesnt then
Turn off the device
Power on
During start up, hold down the menu button as soon as you feel the first vibrate
Continue to hold menu down until phone has completely booted
Click to expand...
Click to collapse
It's not working it's still in safe mode.....I don't know how it goes to safe mode....when I restart my phone suddenly it gone in safe mode.....
sent from heaven.....
Anyone there who can help me??!!
sent from heaven.....
can get screenshot?take with other camera maybe...
never see safe mode...
Did u flash recoveryNeo.img
Sent from Xperia Neo using Xperia Pureness....
Madfysh said:
Before we begin, read this: http://www.toytowngermany.com/wiki/Forum_topic_titles
Second, what do you mean by safemode? How did you enter in it?
Click to expand...
Click to collapse
During the Xperia logo, if u keep pressing vol. Down button, u wil enter safe mode. I tried.. Happened once for me.. It ll show 'safe mode' at bottom left corner..with normal home screen
Sent from my Neo V using xda premium
[ stock 4.0.4, rooted, unlocked BL ]
Hit thanks if I helped you
I'm also facing the same problem. Phone is stuck with safe mode. The problem is vol down button. Sometimes it registers vol down button without me pressing it. I'm running Ice Cream Pureness ROM.
when phone is in safe mode, does the menu button (the one with lines over it) work?
i recently tried to flash hatka battery life after reading a guide, saying it was okay to flash the rom first now i am stuck with my droid dna not being able to turn off and only restarting. can someone please help me i am able to get to lockscreen and settings but the screen is black and i get android htcdialer has stopped when it opens. whenever i try to adb it says error
If your phone is frozen on a particular screen, keep holding down the power button, you will see your bottom 3 icons flash repeatedly, Keep holding the power button until it powers off (restarts), the hold time varies-sometimes you need to repeat this process. Once off (actually restarting), hold the volume down key in and it will re boot into fastboot/recovery, you can scroll to recovery and then restore (hope you have a backup)
Hi everyone. I'm wondering if you could help... I followed the instructions in "How to Manually Install Android 4.4 KitKat on Sony Xperia P Smartphone" (I can't post link to it on the forum, sorry).
and successfully finished step 10 without any problems.
9. Type the following commands: fastboot flash boot boot.img
10. Once the "finished" message appears, disconnect the phone from the computer then turn it on while pressing the "volume down" key continuously.
Now the phone starts, shows "Xperia STE" screen briefly and then goes blank. I can't enter fastboot by pressing power and volume down anymore. The pc doesn't recognise the phone anymore either. I also disconnected and reconnected the battery and that didn't work either. What can I do? Any ideas? Many thanks!
Solved - Xperia P stuck in startup after flashing CM1
Managed to enter TWRP recovery by turning off phone (take battery out), turning it back on, when Sony screen appears very quickly keep pressing the power on button several times - don't stop and do it quickly until you enter recovery mode.
Hi guys,
I was following various guides on here to install the cyanogenmod 11.0 ROM http://forum.xda-developers.com/xperia-u/p-development/rom-cyanogenmod-11-0-t2626639 and I have run into an issue.
I put the gapps zip and the ROM zip into the internal storage of the phone. I then typed "fastboot flash boot boot.img" into cmd and that went OK. When that was done, I did "fastboot reboot." The phone then showed the Sony logo screen (although it is different from the one I am used to seeing - it shows XPERIA STE at the bottom, but I assume this is normal?), then this screen turned off and on again repeatedly. I then mashed the volume up key and eventually it entered into the CWM recovery. I then selected to install the ROM zip, it did some loading and installing and stuff, as expected. The same Sony XPERIA STE screen came on again, and keeps turning on and off. This time however, I cannot get into CWM recovery mode.
If I hold the power button and volume up, it vibrates once, then the screen comes on and off again. If I hold the power button and volume up, wait for the single vibration and keep holding, it vibrates three times and is then completely off. If i plug it into the computer, the screen comes on and off. If I plug it into the computer and hold the volume up, it enters fastboot mode without trouble.
Thanks in advance for any advice.
hedgy03 said:
Hi guys,
I was following various guides on here to install the cyanogenmod 11.0 ROM http://forum.xda-developers.com/xperia-u/p-development/rom-cyanogenmod-11-0-t2626639 and I have run into an issue.
I put the gapps zip and the ROM zip into the internal storage of the phone. I then typed "fastboot flash boot boot.img" into cmd and that went OK. When that was done, I did "fastboot reboot." The phone then showed the Sony logo screen (although it is different from the one I am used to seeing - it shows XPERIA STE at the bottom, but I assume this is normal?), then this screen turned off and on again repeatedly. I then mashed the volume up key and eventually it entered into the CWM recovery. I then selected to install the ROM zip, it did some loading and installing and stuff, as expected. The same Sony XPERIA STE screen came on again, and keeps turning on and off. This time however, I cannot get into CWM recovery mode.
If I hold the power button and volume up, it vibrates once, then the screen comes on and off again. If I hold the power button and volume up, wait for the single vibration and keep holding, it vibrates three times and is then completely off. If i plug it into the computer, the screen comes on and off. If I plug it into the computer and hold the volume up, it enters fastboot mode without trouble.
Thanks in advance for any advice.
Click to expand...
Click to collapse
Press the power button repeatedly to enter TWRP recovery. Then, wipe everything except sd card/internal storage. Then, install the rom as usual.
So I flashed ElitekenalV3 today after unlocking the bootloader and now my phone is stuck. It is only flashing red light while charging. I can't even see the sony logo anymore. which charging if I press the power button it vibrates and if I press and hold the power and volume down button the logo pops up only for a second? please help me. SOLVED!!
@iXaidyiu can you help him?
si1233 said:
So I flashed ElitekenalV3 today after unlocking the bootloader and now my phone is stuck. It is only flashing red light while charging. I can't even see the sony logo anymore. which charging if I press the power button it vibrates and if I press and hold the power and volume down button the logo pops up only for a second? please help me
Click to expand...
Click to collapse
1.Flash stock firmware with flashtools
2.If you can use fastboot flash kernel again use your PC
But the first method recommended
si1233 said:
So I flashed ElitekenalV3 today after unlocking the bootloader and now my phone is stuck. It is only flashing red light while charging. I can't even see the sony logo anymore. which charging if I press the power button it vibrates and if I press and hold the power and volume down button the logo pops up only for a second? please help me
Click to expand...
Click to collapse
Well first of all be sure that your phone is unlocked, after try to recover it with flashtool