I bought my Honor 7 16GB (Space Grey) from Merrimobiles in China. It came with Chinese apps installed and says PLK-UL00 for model. I cannot find any updates for that and I cannot find a booloader unlock key for that model either. I am running build B190 5.0.2. I haven't gotten an OTA update in a long time.
Any ideas?
As a side note, I get no 4G coverage with AT&T in the US (probably my fault for not getting one with the right bands). In the past few weeks I get really awful service and I think the antenna is having issues. The device has also gotten buggy and slower.
@phillyd32: What's your build number buddy?
I'm having the same problem as phillyd32. I also bought my phone direct from China and didn't realize all the complications involved with that.
My build number is PLK-UL00C17B190.
I've been searching all over for information on this but I'm mostly finding information on the Indian version of th ephone that sharkes the model number PLK-UL00.
Thanks so much in advance if you have any advice.
@phillyd32 @rowdyhowdy here it is, you can upgrade it manually.
LINK
DigiGoon said:
@phillyd32 @rowdyhowdy here it is, you can upgrade it manually.
LINK
Click to expand...
Click to collapse
I didn't check back on this because I decided on buying an Honor 8, but I'll be doing this upgrade before I sell/give the Honor 7. Thanks a million!
phillyd32 said:
I didn't check back on this because I decided on buying an Honor 8, but I'll be doing this upgrade before I sell/give the Honor 7. Thanks a million!
Click to expand...
Click to collapse
You're welcome.
Always here to help.
DigiGoon said:
You're welcome.
Always here to help.
Click to expand...
Click to collapse
I have no idea what to do with this zip, is there a guide or basic instructions?
phillyd32 said:
I have no idea what to do with this zip, is there a guide or basic instructions?
Click to expand...
Click to collapse
Here it is:
Download that zip file.
Extract and get UPDATE.APP from that zip file.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
After doing this put that very UPDATE.APP in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
@phillyd32 I hope you have your build number starting like this PLK-UL00C17
@DigiGoon You are da man. Thanxx a lot
Related
I decided to root my phone. Then after following instructions to upgrade to ICS from a website I realized that I downloaded the wrong version (I have the international version, I think. It is was like "I9100X...something" sorry guise) once I noticed that after using Odin it got stuck at "data.img" I was rooting at school, and unfortunately, I had to leave and disconnect the phone from my laptop and was forced to take out the battery. Did I brick my SGS2?:crying: And if no (hopefully), is there an easier way to install an OS? Thank youu
MrFdhigsKp said:
I decided to root my phone. Then after following instructions to upgrade to ICS from a website I realized that I downloaded the wrong version (I have the international version, I think. It is was like "I9100X...something" sorry guise) once I noticed that after using Odin it got stuck at "data.img" I was rooting at school, and unfortunately, I had to leave and disconnect the phone from my laptop and was forced to take out the battery. Did I brick my SGS2?:crying: And if no (hopefully), is there an easier way to install an OS? Thank youu
Click to expand...
Click to collapse
1. Can you still get to download mode/recovery mode or both?
2. Remove your battery and check for your phone model no.
Jokesy said:
1. Can you still get to download mode/recovery mode or both?
2. Remove your battery and check for your phone model no.
Click to expand...
Click to collapse
I9100XWLPD something?
I dont remember any i9100X there is S II X with 1.5 Ghz but its model name is different.. I think problem is something else not I9100X****
Cable problem maybe..
Now try holding Vol down + home + power button
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
I have buy LG V10 H960A some days. I have flashed Android 6.0.1 and power goes down in my home. Now my phone has Died. I have SD Card , but have no unbrick image file. If anyone has the file, I can 5 - 10 USD pay.
I like this Phone, and will unbrick. Boot from sd card. Please help for me.
Ur going to have to use LG UP to flash a stock image from the bootloader. Should either be volume down or volume up that needs to be held while the device is off and you plug it into your computer. Just a matter of finding the correct image to flash.
bantzt said:
Ur going to have to use LG UP to flash a stock image from the bootloader. Should either be volume down or volume up that needs to be held while the device is off and you plug it into your computer. Just a matter of finding the correct image to flash.
Click to expand...
Click to collapse
LG UP can not flash, device is off. Only (last) hope Windows 7 can see unbekannte Usb device. LGH960A20a_00_03_16.kdz (or Switzerland LGH960A10c_00_1224) is a stock image. I living in Zürich.
So you can't enter "download mode" for ur phone at all?
bantzt said:
So you can't enter "download mode" for ur phone at all?
Click to expand...
Click to collapse
No. Can not. I search a debrick image. I have see in Youtube thats can help. If anyone has LGH960A (European) can make the file. After send me and after I can flash to my 64Gb SD card. LG support has no debrick files. Intersting Samsung has debrick files online.
I give back to Service , maybe is better, and maybe has no more Problem.
MarkusDevil said:
No. Can not. I search a debrick image. I have see in Youtube thats can help. If anyone has LGH960A (European) can make the file. After send me and after I can flash to my 64Gb SD card. LG support has no debrick files. Intersting Samsung has debrick files online.
I give back to Service , maybe is better, and maybe has no more Problem.
Click to expand...
Click to collapse
You might try the LG V10 forums. This is the Verizon Wireless variant forum. The main LG V10 forums covers all models and has a lot more active people following it.
Haxcid said:
You might try the LG V10 forums. This is the Verizon Wireless variant forum. The main LG V10 forums covers all models and has a lot more active people following it.
Click to expand...
Click to collapse
Thank you.
Hello.
I was trying to install a treble rom on my p20 lite and suddenly after flashing i needed to flash stock recovery to make the stock wipes.
I did.
The rom started but with no keyboard. I couldnt pass google part to get to the rom menu.
Ok.
I decided to flash it again.
I did. But this time, the rom never started and i was with stock erecovery, so couldnt flash again.
I went to flash twrp but FRP is LOCKed. Bootloader unlocked, obviously. And bc of that i cant flash ANYTHING.
Tried to flash system, twrp, anything. I cant. Says FRP lock.
Tried to lock bootloader and relock again: I cant. It says it needs to unlock FRP before.
Tried DC PHOENIX, didn't work on my p20.
Scrolled all google and xda for help, nothing.
Tried erecovery stock rom installation. It downloads the files but never installs, i've spent 5 hours waiting for it to go off the 0%. Nothing happens.
Already made erecovery wipe data/cache. Nothing.
Can someone please help me?
Hi there
Can you tell what's your build number if you already knew before this happened?
Also, right now your only hope is your Stock Recovery so let's focus on that:
Please try to download and install the official ROM via the eRecovery a couple of times and connect it to the best Wifi you have.
Do you have bootloader "unlocked" or "locked" right now?
FRP is locked so no changes possible yup.
If you have your bootloader "locked" not "relocked" you have warranty and you can send it to a customer repair center and they can solve it for you.
With the methods we know it's pretty much impossible, altough try this via fastboot command line:
fastboot erase config
then
fastboot reboot
If this does not do it then try with DC-Unlocker software via this link https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry for insisting,
Best of hopes,
AS
ars_chelsea said:
Hi there
Can you tell what's your build number if you already knew before this happened?
Also, right now your only hope is your Stock Recovery so let's focus on that:
Please try to download and install the official ROM via the eRecovery a couple of times and connect it to the best Wifi you have.
Do you have bootloader "unlocked" or "locked" right now?
FRP is locked so no changes possible yup.
If you have your bootloader "locked" not "relocked" you have warranty and you can send it to a customer repair center and they can solve it for you.
With the methods we know it's pretty much impossible, altough try this via fastboot command line:
fastboot erase config
then
fastboot reboot
If this does not do it then try with DC-Unlocker software via this link https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry for insisting,
Best of hopes,
AS
Click to expand...
Click to collapse
Hey, thanks for the answer.
My build number (ane-lx3 c605 b149)
I tried for like 10 times already to install the firmware from erecovery but it refuses to leave the 0% when installing... Ive waited more than 5 hours already.
When trying these fastboot command lines, i got this: https://imgur.com/a/hrSB8iK
Dc also didnt worked for me, i think it doesnt support my phone model?
Bc i can't find it in the list of phone model in the software also tried with similar and doesnt work.
My bootloader is unlocked, i guess warranty wont solve my problem bc of that :crying:
Thanks again for tryna help!
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Arnys said:
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Click to expand...
Click to collapse
He/She does need a micro sd card adapter for that to connect to the pc or use it on another phone and then copy the files.
Yeah I forgot about that I guess XD
Cheers,
AS
ars_chelsea said:
He/She does need a micro sd card adapter for that to connect to the pc or use it on another phone and then copy the files.
Yeah I forgot about that I guess XD
Cheers,
AS
Click to expand...
Click to collapse
Arnys said:
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Click to expand...
Click to collapse
Thank you, guys.
I tried this method just now but after a time with EMUI logo in the screen it said software install failed!
I guess im really lost. :crying:
fcknumb said:
Thank you, guys.
I tried this method just now but after a time with EMUI logo in the screen it said software install failed!
I guess im really lost. :crying:
Click to expand...
Click to collapse
Hey
Did you try the official guide of @Merlin_99?
If not check his thread here: https://forum.xda-developers.com/huawei-p20-lite/how-to/root-how-to-install-update-t3841557
That's the official way to do it
Cheers,
AS
ars_chelsea said:
Hey
Did you try the official guide of @Merlin_99?
If not check his thread here: https://forum.xda-developers.com/huawei-p20-lite/how-to/root-how-to-install-update-t3841557
That's the official way to do it
Cheers,
AS
Click to expand...
Click to collapse
Thanks for your reply and still tryna help me.
As i see, the only thing i didnt do from the official guide is this part:
"Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade."
That i cant do cause my phone is systemless and i cant turn it on to use dialer :crying:
fcknumb said:
Thanks for your reply and still tryna help me.
As i see, the only thing i didnt do from the official guide is this part:
"Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade."
That i cant do cause my phone is systemless and i cant turn it on to use dialer :crying:
Click to expand...
Click to collapse
Okay then.
It should work though did you put the dload folder into the root your sd card and then power on button + Volume buttons at the same time while powering on?
Cheers,
AS
ars_chelsea said:
Okay then.
It should work though did you put the dload folder into the root your sd card and then power on button + Volume buttons at the same time while powering on?
Cheers,
AS
Click to expand...
Click to collapse
Right bae, its like that into my sdcard: 1. http://prntscr.com/lx74xt 2. http://prntscr.com/lx7im7
And yes, i did pressed power and + - volume buttons at same time!
Thank you for not giving up.
fcknumb said:
Right bae, its like that into my sdcard: 1. http://prntscr.com/lx74xt 2. http://prntscr.com/lx7im7
And yes, i did pressed power and + - volume buttons at same time!
Thank you for not giving up.
Click to expand...
Click to collapse
Hi again
This is really weird... This one should work... Did you download the right version of your build? example: 8.0.0.162(C432)
And try to find the latest version of your build and via your model example: ANE-LX1 which is on the back of the phone with small letters or on the box
Cheers,
AS
ars_chelsea said:
Hi again
This is really weird... This one should work... Did you download the right version of your build? example: 8.0.0.162(C432)
And try to find the latest version of your build and via your model example: ANE-LX1 which is on the back of the phone with small letters or on the box
Cheers,
AS
Click to expand...
Click to collapse
Yeah, i did it all right.
So sad...
fcknumb said:
Yeah, i did it all right.
So sad...
Click to expand...
Click to collapse
Remote instructions are not the best for these problems, so try to get a person on your country which knows some stuff and can help you out there
Hi All. I'm afraid my Honor 10 is permanently dead but I'm looking for a solution to "exhume" it.
I had latest firmware installed, 9.0.0.219 (C636), but after I installed it, I observed some ghost touches and application lags so I wanted to install the Pixel Experience custom rom. To install this rom it needs not to be on Emui 9, so I used beta-downy_04 to rollback to latest oreo 8.1 fimware (COL-L29C636B153 8.1.0.153). All good until an error appears while flashing the firmware, "Software fimware failed"..Then a message appeared that suggested me to reboot or select eRecovery. I chose eRecovery but nothing. It won't to turn on. I tried to force reboot with Vol-Up and powe for more than 30 seconds, no responses. I tried to use Multi-tool because if I connect Honor 10 to pc it is recognised as fastboot device, so I tried to unbrick it flashing system, cust, kernel and recovery_ramdisk images, but nothing. So Am I finished? Can someone help me? Thanks :crying:
Sorry to hear that man. I noticed that after .219 update HiSuite doesn't get rollback firmwares from HiCloud anymore. Is that the reason why you tried the method above?
I tested rollback request with .212 in HiSuite and it successfully sent me the rollback data which is 219870 ID (not 206629 or 186881). Since Huawei device names change it's kinda tricky to force stuff into the phone.
{"status":"0","versionPackageCheckResults":[{"status":"0","autoPollingCycle":"1","components":[{"componentID":1,"createTime":"2019-04-25T07:08:45+0000","description":"219 - 153 fullback","name":"COL-L29 8.1.0.153(C636)","pointVersion":"1","reserveUrl":"updatessl.dbankcdn.com","ruleAttr":"","url":"http://update.dbankcdn.com/TDS/data/files/p3/s15/G3015/g1642/v219870/f1/","version":"COL-L29 8.1.0.153(C636)","versionID":"219870"}],"versionPackageType":1,"checkEnd":"1"}]}
If you didn't try the id 219870, can you try to flash it?
MagnoT said:
Sorry to hear that man. I noticed that after .219 update HiSuite doesn't get rollback firmwares from HiCloud anymore. Is that the reason why you tried the method above?
I tested rollback request with .212 in HiSuite and it successfully sent me the rollback data which is 219870 ID (not 206629 or 186881). Since Huawei device names change it's kinda tricky to force stuff into the phone.
{"status":"0","versionPackageCheckResults":[{"status":"0","autoPollingCycle":"1","components":[{"componentID":1,"createTime":"2019-04-25T07:08:45+0000","description":"219 - 153 fullback","name":"COL-L29 8.1.0.153(C636)","pointVersion":"1","reserveUrl":"updatessl.dbankcdn.com","ruleAttr":"","url":"http://update.dbankcdn.com/TDS/data/files/p3/s15/G3015/g1642/v219870/f1/","version":"COL-L29 8.1.0.153(C636)","versionID":"219870"}],"versionPackageType":1,"checkEnd":"1"}]}
If you didn't try the id 219870, can you try to flash it?
Click to expand...
Click to collapse
Hi. Thanks for your answer. Yes, I tried to rollback with beta-downy program because I wanted to flash a custom rom and I needed android 8.1 to do that.
Unfortunately I flashed a firmware COL-L29 8.1.0.153(C636) with ID 186881 because it has three files and beta-downy program works only if update.zip, update_all_hw.zip and update_data_public.zip files are present in ZIP-HERE folder and firmware with ID 219870 has only two files...
At this moment Honor 10 is fully dead. I can't access to bootloader mode but if I connect it to pc and I use adb, I seem to be able to use fastboot but I don't know if It really flashed something. So I can only use fastboot ( and I flashed all needed files of latest firmware installed, version .219) but it is useless at this time because Honor 10 appears dead, it won't charge. Sometimes seven red blinding appear when I try to force reboot pressing and holding power on and Vol-up buttons.... I tried to remove battery also, then to plugin the charge and holding power button for 30 seconds and then to insert the battery again but nothing. No charge and no power on... I have no idea what I must to do...
Someone alive???
Why you can't access bootloader?
Did you try to plug in charger while pressing vol down button?
empedocle86 said:
Hi All. I'm afraid my Honor 10 is permanently dead but I'm looking for a solution to "exhume" it.
I had latest firmware installed, 9.0.0.219 (C636), but after I installed it, I observed some ghost touches and application lags so I wanted to install the Pixel Experience custom rom. To install this rom it needs not to be on Emui 9, so I used beta-downy_04 to rollback to latest oreo 8.1 fimware (COL-L29C636B153 8.1.0.153). All good until an error appears while flashing the firmware, "Software fimware failed"..Then a message appeared that suggested me to reboot or select eRecovery. I chose eRecovery but nothing. It won't to turn on. I tried to force reboot with Vol-Up and powe for more than 30 seconds, no responses. I tried to use Multi-tool because if I connect Honor 10 to pc it is recognised as fastboot device, so I tried to unbrick it flashing system, cust, kernel and recovery_ramdisk images, but nothing. So Am I finished? Can someone help me? Thanks :crying:
Click to expand...
Click to collapse
Same happened to me so i bought new phone, luuckly i bought phone that broke with "found" money. Go to nearest repair center and say you left phone plugged overnight to update, tomorrow you came and it was dead. They will repair it for free if it had guarantee.
bestenderowner said:
Same happened to me so i bought new phone, luuckly i bought phone that broke with "found" money. Go to nearest repair center and say you left phone plugged overnight to update, tomorrow you came and it was dead. They will repair it for free if it had guarantee.
Click to expand...
Click to collapse
Same problem here...but i don't know if DC-Unlocker is compatible with this device. My concern is pay for service and not works. My device is in testpoint mode, but i can't find flash tool and board firmware for this version (COL-L29), variant C636 (spcseas) and bootloader lock for more help...
I appreciated any helps....
Thanks a lot
For all of you if you are willing to open back panel of your phone I can help you.
miststudent2011 said:
For all of you if you are willing to open back panel of your phone I can help you.
Click to expand...
Click to collapse
Panel back open....and now??
darks0ldier said:
Panel back open....and now??
Click to expand...
Click to collapse
There is a method known as test point method where you short two ports and flash service firmware. And later you flash full firmware.
Search Huawei p20 forums for details. Try to find them and share the links you got then I will guide you what next.
darks0ldier said:
Same problem here...but i don't know if DC-Unlocker is compatible with this device. My concern is pay for service and not works. My device is in testpoint mode, but i can't find flash tool and board firmware for this version (COL-L29), variant C636 (spcseas) and bootloader lock for more help...
I appreciated any helps....
Thanks a lot
Click to expand...
Click to collapse
I bought Chinese ****, i tried everything, i paid 30 bucks for code from one asshole, than i thought i hardbricked my device, i went to service, they said the motherboard was burnt, i lied that i left device update overnight xD, because bricking voids warranty. They said they dont support chineese guarante because we are Eu, so i sent my **** back to bang**** banggood. Com scammers. Than year i waited and they sent me refund 100 dolars, i paid 450 bucks, luckly i bought it with my grampa credit card so lol i got 100 bucks free xD ans i bought iFix it kit. So i recommend you to buy unlock code, and if you know what you are doing, you can successfully rebrand it, il send you one link, that helped me a lot. But it was t9o late, and i was stupid. I was curious and i flashed my phone with upgrade file, i didnt flash it with full ota., so basically idfk what did i do xD. So i probably wiped end to end and it removed power supply unit settings and full power from battery destroyed my cpu. Sooooo good luck and find something cheap or just try to get free code from funky huawei, they can help you rebrand, better pay 50bucks than loose 400 bucks
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
darks0ldier said:
Same problem here...but i don't know if DC-Unlocker is compatible with this device. My concern is pay for service and not works. My device is in testpoint mode, but i can't find flash tool and board firmware for this version (COL-L29), variant C636 (spcseas) and bootloader lock for more help...
I appreciated any helps....
Thanks a lot
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-10/how-to/successfully-rebranding-chinese-col-t3823782
And i just noticed your device is dead. Okay idk are u familiar with those processes.
Extract boot.img file from firmware, (firmware extractor) by huawei. Than open adb, and do flash boot boot. Img, flash recovery recovery.img and thst
Hi guys ,
i'm trying to root my samsung A10 but i didn't found a efficient method to do it.
i've tried to root with a tutoriel of A30 but it's not the same thing.
please help !!
thank you :fingers-crossed:
Just came here to find a root method for the SM-A105M. Seems like not a lot of love for the A10 here.. Lol Anyways, I will be testing this method I came across out tonight. I will post the link but can't confirm it's working. I'll post my results tomorrow.
https://rootmydevice.com/root-samsung-galaxy-a10/
So... Did it work?
Sassiest said:
Just came here to find a root method for the SM-A105M. Seems like not a lot of love for the A10 here.. Lol Anyways, I will be testing this method I came across out tonight. I will post the link but can't confirm it's working. I'll post my results tomorrow.
https://rootmydevice.com/root-samsung-galaxy-a10/
Click to expand...
Click to collapse
Because a10 is a crap device and laggy as hell that's why ppl do not buy it.
andrei1412 said:
Because a10 is a crap device and laggy as hell that's why ppl do not buy it.
Click to expand...
Click to collapse
Is not a crappy and laggy device. Your answer is so poor..
Nope.. tried 3 different methods now and so far nothing has worked.. ??
Still nobody found a solution to this problem?
We need the correct Twrp for A10.. anyone can develop it?
help please need root this phone
Do you guys have an OEM unlock toggle available in dev options? If the answer to this is yes, then give me a link to your firmware and I'll try to root it.
I have the OEM unlock button but whenever I tried to Odin Flash it, it says Locked by OEM.
My model is SM-A105G
w.w.w.sammobile.com/samsung/firmware/SM-A105G/
Appreciate if you can help.
Thank you
Spaceminer said:
Do you guys have an OEM unlock toggle available in dev options? If the answer to this is yes, then give me a link to your firmware and I'll try to root it.
Click to expand...
Click to collapse
s_ryan said:
I have the OEM unlock button but whenever I tried to Odin Flash it, it says Locked by OEM.
My model is SM-A105G
w.w.w.sammobile.com/samsung/firmware/SM-A105G/
Appreciate if you can help.
Thank you
Click to expand...
Click to collapse
Make sure usb debugging is enabled, connect your phone to your pc, then check the box that pops up on your phone to let it always allow access from your computer. Also make sure you're using the latest patched Odin. What country is your device from?
I have done all that but still the same. My device is from Singapore.
Spaceminer said:
Make sure usb debugging is enabled, connect your phone to your pc, then check the box that pops up on your phone to let it always allow access from your computer. Also make sure you're using the latest patched Odin. What country is your device from?
Click to expand...
Click to collapse
I read on xda is it possible to root samsung galaxy M20! So, why is not possible to root A10?
s_ryan said:
I have done all that but still the same. My device is from Singapore.
Click to expand...
Click to collapse
Have you had it for at least 7 days? Sometimes there's a temp lock. You might also have a hardware key combo that'll unlock the bootloader. With the device powered off, hold Vol ↑ + Vol ↓ and plug it into your pc. When download mode shows up, hold Vol ↑ for about 30sec to 1min. If it works it'll wipe your data, then automatically reboot and you'll be unlocked for flashing. If this doesn't work, I'll have to look at your bootloader.img and see if there's a different combo in there. (It's possible that there's none.)
Andreas197 said:
I read on xda is it possible to root samsung galaxy M20! So, why is not possible to root A10?
Click to expand...
Click to collapse
If we can get Odin to flash anything that isn't signed by Samsung, then yeah it should be possible.
I own SM-A105FN from italy.
I got this phone from someone else and he had it for more then 2 months now. I understand that for Xiaomi, u need to wait for certain period of time before you could flash it, does Samsung have it too? I tried the powered off, hold down Vol up and down + power button, but nothing happened for me. Is there a way to extract the bootloader.img for you to inspect?
Thanks dude for checking out!
Spaceminer said:
Have you had it for at least 7 days? Sometimes there's a temp lock. You might also have a hardware key combo that'll unlock the bootloader. With the device powered off, hold Vol ↑ + Vol ↓ and plug it into your pc. When download mode shows up, hold Vol ↑ for about 30sec to 1min. If it works it'll wipe your data, then automatically reboot and you'll be unlocked for flashing. If this doesn't work, I'll have to look at your bootloader.img and see if there's a different combo in there. (It's possible that there's none.)
If we can get Odin to flash anything that isn't signed by Samsung, then yeah it should be possible.
Click to expand...
Click to collapse
Spaceminer said:
Do you guys have an OEM unlock toggle available in dev options? If the answer to this is yes, then give me a link to your firmware and I'll try to root it.
Click to expand...
Click to collapse
Hi, did you manage to root SM-A105F device ?
Someone tryed this bootloader unlock procedure?
Wow.. thanks for the video, I will try to flash it with Odin later.. I tried with the power previously hence why It did not work.
Andreas197 said:
Someone tryed this bootloader unlock procedure?
Click to expand...
Click to collapse