Aplus GV18 MTK6261 ( i think) 32 Mb Ram Need help. - Android Q&A, Help & Troubleshooting

Hello , I`m a sad buyer of Aplus GV18 MTK6261 , as the seller said 64 Ram 32 Rom, but I think it is 32 Ram 32 Rom, whatever...
I tried to flash other firmwares to get possibility to change watchfaces but no luck, the firmwares gave me an useless Touchscreen( not working with other fw). I went back to original fw but I'am unable to chage watchfaces, could someone help me changing watchfaces?
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[GigaDevice] GD25LQ32" (236)
Size = 0x00400000 (4MB/32Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21]
OK!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!
Increment/Decrement Test :
Writing ...
OK!
Click to expand...
Click to collapse
Attached you will find original Fw.
Thanks.

Please delete post. recreated in smartwatch section

Related

Hapai X710d dead

youtube.com/watch?v=P3hIVfJKYRM
my haipai x710d dead
formated it by flash tool
is dead phone no power ((((
sorry english
flash_tool memory test message
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x00100000(1MB)
EMMC_PART_BOOT2 Size = 0x00100000(1MB)
EMMC_PART_RPMB Size = 0x00020000(0MB)
EMMC_PART_GP1 Size = 0x00000000(0MB)
EMMC_PART_GP2 Size = 0x00000000(0MB)
EMMC_PART_GP3 Size = 0x00000000(0MB)
EMMC_PART_GP4 Size = 0x00000000(0MB)
EMMC_PART_USER Size = 0xE9000000(0MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28]
OK!!
Try plugging in with USB, going into recovery, and flashing the stock android ROM bundled with the device.
cyr0s said:
Try plugging in with USB, going into recovery, and flashing the stock android ROM bundled with the device.
Click to expand...
Click to collapse
print
phone is dead...
no power
??????

[Q] ROM for MT6575

Hello:
I bought a Lenovo A820T in Aliexpress is absolutely false
Anyway, upon arrival I see that it has nothing to do with the order, but I guess, at least, will have the same characteristics.
No way, attempting to charge a ROM in Spanish (The phone only had the Chinese and English ROM and loaded up all those Chinese applications absolutely useless, at least here) the phone dies.
When you look at the mistakes that returns Flash Tools is that instead of a brings MT6589 MT6575 (Among other many differences in RAM, camera, etc ...).
Well, let's see how we fix it ....
Nothing to do, every time I try to flash a ROM (not all dead because drivers can recognize and reformat) returns a typing error:
S_DA_DRAM_NOT_SUPPRT (3004)
Memory by passing the test with Flash Tools returns:
Re =============== "> Memory Detection Reportre"> ===============
Internal RAM:
re "> Size = 0x00020000 (128KB)
External RAM:
re "> ERROR: External RAM was not detected!
NAND Flash:
re "> ERROR: NAND Flash was not detected!
EMMC:
re "> EMMC_PART_BOOT1 re"> Size = 0x0000000000200000 (2MB)
re "> EMMC_PART_BOOT2 re"> Size = 0x0000000000200000 (2MB)
re "> EMMC_PART_RPMB re"> Size = 0x0000000000020000 (0MB)
re "> EMMC_PART_GP1 re"> Size = 0x0000000000000000 (0MB)
re "> EMMC_PART_GP2 re"> Size = 0x0000000000000000 (0MB)
re "> EMMC_PART_GP3 re"> Size = 0x0000000000000000 (0MB)
re "> EMMC_PART_GP4 re"> Size = 0x0000000000000000 (0MB)
re "> EMMC_PART_USER re"> Size = 0x00000000E2C00000 (3628MB)
Re ============ "> RAM Testre"> ============
SKIP! External RAM was not detected!
But the screen is black and no signs of life.
Do not know how to load the preloader can then record a TWRP recovery and from there restore the backup made with TWRP that I have saved.
Apparently the ROM to load the Flash Tools are not able to write to the correct memory address.
I try to load only the image of preloader.bin and no way.
If someone could help me out, I would be eternally grateful.

[Q] Bricked or broken Jiayu G3

Hello,
First of all I would like to apologize for creating a new thread for this question. I asked the same question at [HELP THREAD] Ask ANY Question. Noob Friendly. in September last year.
I own a Jiayu G3 and one day it suddenly stopped working.
It's possible to access the META mode and therefore I can flash it with a new firmware (for example: G3-20130116-221844 stock rom) with SP Flash Tool. However the phone won't power up. I don't know if I'm doing anything wrong. The flashing seem to be OK, but when I perform a memory test with the same software it gives me an "ERROR: Nand flash was not detected"
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000100000(1MB)
EMMC_PART_BOOT2 Size = 0x0000000000100000(1MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E9000000(3728MB)
I guess there's a chance the problem being a physical one. Although the error message makes me a bit more optimistic and make me think there's an easier "do it yourself" solution.
I really appreciate any help you can provide.
Hello again,
I just managed to start my phone. However it went black after the Jiayu bootscreen.
Still trying to be optimistic, so I wonder if there are anything else I can do to be sure what kind of problem I have.
Thank you for any help you can provide in this situation.

Lenovo P780 COMPLETE WIPE OUT!

Hi,
There is something wrong with my phone because of which it keeps restarting and even the battery symbol after putting the phone on charger comes distorted on the screen. The screen was working fine before and I was using the Marshmellow ROM and it was working fine.
Another problem which haunts my phone is the absence of phone memory. My phone's memory (NOT THE INTERNAL MEMORY) is not mounted. Neither during the recovery mode and nor during the normal functioning mode. During recovery, it says that it is not about to mount "preload".
Also, having an 8 GB phone, the internal memory that is available is only 0.98 GB. The phone memory is completely absent.
I want to completely wipe out everything from the phone and install a fresh ROM.
Can you please advice?
I have the flash tool but it and official rooted ROM but it does not recover the lost memory.
Please help!
What was your original firmware?
Did you backup your original firmware?
What you have now is an custom made firmware. This firmware makes your sd card as default internal memory.
You can try your default ROW KITKAT firmware. Look for it in development area.
Flash with SP Flash Tool. Take a good look on what SDP Flash Tool do you use. If you use an wrong SP Flash Tool you can loose IMEI.
Original firmware was Stock Firmware.
This screenshot if of the time when I installed MIUI ROM.
I was using Google M firmware before this.
I did a Memory Test on my device. And this is what the result said:-
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001D2000000(7456MB)
Thank you for the guidance. This was because I installed the Custom ROM over 2.3 Jellybean. I got back 6 GB of memory!
You are wellcome.

QTab v7 Completely dead

Hi experts!
Few days ago i rooted my QTab v7 MT6580 using kingroot, then i tried to replace it using super sume. After that my tab stuck on boot loop. I flashed it using sp flash tools but problem was still. Then i used "Format all + download" method after that it didnt get on.. No vibration no charging animation nothing else.. But it still connects with my system and i can flash it again but all invain plz help plzz em not an expert plz help me
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
Device Id = "Unnamed Flash" (83)
Size = 0x200000000 (8192MB/65536Mb)
EMMC:
ERROR: EMMC was not detected!
UFS:
ERROR: UFS was not detected!

Categories

Resources