Ported to the Galaxy A5 2016 Duos SM-A5100 - Qualcomm MSM8939
Hong-Kong and Chinese models.
Prerequisites:
Bootloader must be unlocked with CROM SERVICE apk and OEM UNLOCK enabled in developer settings.
INSTALL:
Flash with ODIN 3.10.7 in the AP slot.
Device may reboot several times.
CF-Auto-Root-a5xltechn
Disclaimer: rooting trips your knox counter and may void your warranty.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Thank you very much you are the BEST
45 downloads, not one like clicked or acknowledgement posted aside from the one above. Cheers guys. [emoji53]
ashyx said:
45 downloads, not one like clicked or acknowledgement posted aside from the one above. Cheers guys. [emoji53]
Click to expand...
Click to collapse
Any elaboration on the crom service? and how to use them for galaxy a5100.thanks
Tried but Failed
Hello. Thanks for your Rooting Kit, I had downloaded them, and tried to my unit A5100,here's what I did:
1. First, at phone Developers Options, I had the " OEM unlock" ON.
2. Second, I had downloaded the CROM Service apk at the "Galaxy Apps" on my phone.
3. Then, I've switched off my phone, put it at download mode, and connected to my pc via cable.
4. I downloaded the attached file in your post, extracted them using 7zip. and put them at my desktop to easily navigate.
5.. I open the Odin app, then at PDA space, Ive searched for the MD5 file at my desktop.
6. Then i clicked start, The bar at the upper left turns green up to 25%, and suddenly it turns red,with a "FAIL" sign, and I've seen a red message on my phone saying," Binary too large"
What went wrong?thanks..
gensomaedenx said:
Hello. Thanks for your Rooting Kit, I had downloaded them, and tried to my unit A5100,here's what I did:
1. First, at phone Developers Options, I had the " OEM unlock" ON.
2. Second, I had downloaded the CROM Service apk at the "Galaxy Apps" on my phone.
3. Then, I've switched off my phone, put it at download mode, and connected to my pc via cable.
4. I downloaded the attached file in your post, extracted them using 7zip. and put them at my desktop to easily navigate.
5.. I open the Odin app, then at PDA space, Ive searched for the MD5 file at my desktop.
6. Then i clicked start, The bar at the upper left turns green up to 25%, and suddenly it turns red,with a "FAIL" sign, and I've seen a red message on my phone saying," Binary too large"
What went wrong?thanks..
Click to expand...
Click to collapse
Well for a start I'm not sure what you have extracted?
Just put the .tar in the AP slot and flash.
ashyx said:
Well for a start I'm not sure what you have extracted?
Just put the .tar in the AP slot and flash.
Click to expand...
Click to collapse
Thank you very much. It worked sir, I just reflashed after mistakingly put wrong md5 file at AP slot...it was a wrong file, i need not to extract the tar file, you mentioned above...
ashyx said:
45 downloads, not one like clicked or acknowledgement posted aside from the one above. Cheers guys. [emoji53]
Click to expand...
Click to collapse
Hi, ashyx. The fact is not what you think.
Users from China were blocked to view this page( require VPN) and some of them have poor English, So it's no so easy to Download and use your posted flies.
In fact, there are number of Chinese users need your help.
I'm a A5108(China model with Exnoy CPU) user, and Ihave tried your TWRP recovery and Root package.
It works perfect.I'm grateful to your working.
I Will also bring you Root package to my friends And mark out the original page.
So keep going.[emoji2] You are the best and acknowledged.
Sent from my SM-A5108 using Tapatalk
Gogentle97 said:
Hi, ashyx. The fact is not what you think.
Users from China were blocked to view this page( require VPN) and some of them have poor English, So it's no so easy to Download and use your posted flies.
In fact, there are number of Chinese users need your help.
I'm a A5108(China model with Exnoy CPU) user, and Ihave tried your TWRP recovery and Root package.
It works perfect.I'm grateful to your working.
I Will also bring you Root package to my friends And mark out the original page.
So keep going.[emoji2] You are the best and acknowledged.
Sent from my SM-A5108 using Tapatalk
Click to expand...
Click to collapse
Thanks for the explanation.
help please
hi. bought a phone from china. samsung galaxy a5108. need to root it so that i can download playstore etc. i did the steps but ended uup with the logs below. please i need help. thanks
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cache.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
fdvzvfzv said:
hi. bought a phone from china. samsung galaxy a5108. need to root it so that i can download playstore etc. i did the steps but ended uup with the logs below. please i need help. thanks
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cache.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you unlock the bootloader first?
ashyx said:
Did you unlock the bootloader first?
Click to expand...
Click to collapse
yes i did unlock it with the chrom apk
fdvzvfzv said:
yes i did unlock it with the chrom apk
Click to expand...
Click to collapse
And you enabled oem unlock in developer settings?
ashyx said:
And you enabled oem unlock in developer settings?
Click to expand...
Click to collapse
yes i did.
my goal is to install playstore and google account on it. another problem is that i cant find any custom rom for this samsung galaxy a5108. only the china mobile rom available.
fdvzvfzv said:
yes i did.
my goal is to install playstore and google account on it. another problem is that i cant find any custom rom for this samsung galaxy a5108. only the china mobile rom available.
Click to expand...
Click to collapse
What is the output on your device when this happens?
ashyx said:
What is the output on your device when this happens?
Click to expand...
Click to collapse
ODIN MODE
DOWNLOAD SPEED:FAST
PRODUCT NAME:SM-5108
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
CROM SERVICE: UNLOCK
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID:0 (0X0000)
RP SWREV: B:1 k:0 S:0
it stays the same as above. download mode.
do i have to extract the file? i clicked on AP and selected the .tar file and start. but then i get the fail log i posted preiously.
THANKS a lot for helping me out on this mate.
fdvzvfzv said:
ODIN MODE
DOWNLOAD SPEED:FAST
PRODUCT NAME:SM-5108
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
CROM SERVICE: UNLOCK
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID:0 (0X0000)
RP SWREV: B:1 k:0 S:0
it stays the same as above. download mode.
do i have to extract the file? i clicked on AP and selected the .tar file and start. but then i get the fail log i posted preiously.
THANKS a lot for helping me out on this mate.
Click to expand...
Click to collapse
Is your device Exynos or Snapdragon?
ashyx said:
Is your device Exynos or Snapdragon?
Click to expand...
Click to collapse
samsung exynos octa 7580
fdvzvfzv said:
samsung exynos octa 7580
Click to expand...
Click to collapse
Then i know why its not working. This is for the snapdragon version not Exynos.
No idea why the other guy said it was compatible.
I'll see what i can do. Im on holiday now until Monday.
ashyx said:
Then i know why its not working. This is for the snapdragon version not Exynos.
No idea why the other guy said it was compatible.
I'll see what i can do. Im on holiday now until Monday.
Click to expand...
Click to collapse
OK! yep he said it was compatible, haha. thanks a lot pal.
Have a good one. cheers!
Related
Hello,
I've bricked my phone. I've seeking tutorials ..etc and figured out everything exept spliting firmware, could someone please split firmware for me and upload?
sammobile.com/firmwares/3/?download=15840
I've GT-5830i
THanks in advance!
iznogouda said:
Hello,
I've bricked my phone. I've seeking tutorials ..etc and figured out everything exept spliting firmware, could someone please split firmware for me and upload?
sammobile.com/firmwares/3/?download=15840
I've GT-5830i
THanks in advance!
Click to expand...
Click to collapse
What do you mean splitting the firmware? Are you talking about decompiling it and breaking it into system.img, boot.img, etc?
timmytim said:
What do you mean splitting the firmware? Are you talking about decompiling it and breaking it into system.img, boot.img, etc?
Click to expand...
Click to collapse
Splitting so i could have PDA Phone CSC files to flash with ODIN.
btw sorry wrong fiarmware link sammobile.com/firmwares/3/?download=22788
iznogouda said:
Splitting so i could have PDA Phone CSC files to flash with ODIN.
btw sorry wrong fiarmware link sammobile.com/firmwares/3/?download=22788
Click to expand...
Click to collapse
Are you trying to flash the entire firmware or are you trying to install those separately? I ask because it is already in tar.md5 format to flash the entire thing with Odin.
In fact the instructions to flash the entire firmware are on the page if you scroll down.
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
If you still want to break it apart I can probably help you
timmytim said:
Are you trying to flash the entire firmware or are you trying to install those separately? I ask because it is already in tar.md5 format to flash the entire thing with Odin.
In fact the instructions to flash the entire firmware are on the page if you scroll down.
If you still want to break it apart I can probably help you
Click to expand...
Click to collapse
youtube.com/watch?v=3d7AS3Is4bk
My phone is stuck on Samsung logo, so im going to completely reinstall firmware. (+ it was constantly having some process problems everytime not responding pop-up was showing..
I would appreciate if you could help me.
https://www.youtube.com/watch?v=3d7AS3Is4bk
In this video tutorial that guy has splitted firmware, that's why i asked it.
iznogouda said:
youtube.com/watch?v=3d7AS3Is4bk
My phone is stuck on Samsung logo, so im going to completely reinstall firmware. (+ it was constantly having some process problems everytime not responding pop-up was showing..
I would appreciate if you could help me.
https://www.youtube.com/watch?v=3d7AS3Is4bk
In this video tutorial that guy has splitted firmware, that's why i asked it.
Click to expand...
Click to collapse
To completely reinstall the firmware use the directions on the Sammobile download page.... the ones I posted above. You only need the one file. Besides, I am splitting the tar.md5 apart now and there is only boot.img, system.img, etc.... they are not Odin files like in the video
timmytim said:
To completely reinstall the firmware use the directions on the Sammobile download page.... the ones I posted above. You only need the one file. Besides, I am splitting the tar.md5 apart now and there is only boot.img, system.img, etc.... they are not Odin files like in the video
Click to expand...
Click to collapse
All right, if it's so do't bother yourself continuing to split.. Now i got it, i have to point only PDA and flash..aa
Thank you...
iznogouda said:
All right, if it's so do't bother yourself continuing to split.. Now i got it, i have to point only PDA and flash..aa
Thank you...
Click to expand...
Click to collapse
No rpboelm, let me know how it goes and please click that Thanks button for me if I've helped you
timmytim said:
No rpboelm, let me know how it goes and please click that Thanks button for me if I've helped you
Click to expand...
Click to collapse
Did it!. Ps i followed sammobile instruction but i got error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXMJ2_S5830iITVMK1_S5830iXXMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
P.S fails when reach MODEM
Could I get some help with my Samsung Ace? I am at a loss as to what to do next.
Early last year, I got a Samsung Galaxy Ace S5839i from Three in the UK. Like everyone with this model, I had problems with the limited storage space and bloatware, even after moving apps to the SD card. After some research, I downloaded Titanium and used it to remove the bloatware. Unfortunately, I wasn't careful enough and I must have deleted one or more core files, because now I get the 'android.process.acore' error message very frequently and I am unable to receive/make calls or receive/send text messages.
I have been looking on several android forums, but I have to say I find all the terminology confusing: ROMS, kernels, Odin, SplitFus, flashing – help!
After trying many things suggested on various threads in the forums (all unsuccessfully), I really just want to go back to the way the phone was originally, and then try again with Titanium (more carefully this time!). Is that even possible?
One potentially useful thing that I have learned from the forums is that I could use firmware for the 5830i, even though my phone is the 5839i. The Three firmware for the model 5839i is available on Sammobile, so I would prefer to use that.
However, when I tried to load the 5839i firmware file using Odin 3.09, this happened:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone guide me through this? I just want to get back to how my phone was before I started using Titanium (so I can try Titanium again, but more carefully this time!). NB For some reason, I cannot use KIES.
What should I do?
OhHowWeLaughed said:
Could I get some help with my Samsung Ace? I am at a loss as to what to do next.
Early last year, I got a Samsung Galaxy Ace S5839i from Three in the UK. Like everyone with this model, I had problems with the limited storage space and bloatware, even after moving apps to the SD card. After some research, I downloaded Titanium and used it to remove the bloatware. Unfortunately, I wasn't careful enough and I must have deleted one or more core files, because now I get the 'android.process.acore' error message very frequently and I am unable to receive/receive calls or receive/send text messages.
I have been looking on several android forums, but I have to say I find all the terminology confusing: ROMS, kernels, Odin, SplitFus, flashing – help!
After trying many things suggested on various threads in the forums (all unsuccessfully), I really just want to go back to the way the phone was originally, and then try again with Titanium (more carefully this time!). Is that even possible?
One potentially useful thing that I have learned from the forums is that I could use firmware for the 5830i, even though my phone is the 5839i. The Three firmware for the model 5839i is available on Sammobile, so I would prefer to use that.
However, when I tried to load the 5839i firmware file using Odin 3.09, this happened:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone guide me through this? I just want to get back to how my phone was before I started using Titanium (so I can try Titanium again, but more carefully this time!). NB For some reason, I cannot use KIES.
What should I do?
Click to expand...
Click to collapse
go search your odin problem on google.
after successful went into the originally rom i recommend you to flash simplicity v4 as it only take 4 MB on Internal Memory and you will have a lot of free memory and you will not need to risk with that titanium
go here for unbrick your device .
http://forum.xda-developers.com/showthread.php?t=2283926
ѕєηт ƒяσм αcє-ι-cσσρєяνє
amolgosavi said:
go here for unbrick your device .
http://forum.xda-developers.com/showthread.php?t=2283926
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Click to expand...
Click to collapse
I followed all of the instructions in that thread, but no luck. I used firmware for both the S5839i (single file) and the S5830i (multi files) in each of Odin 1.85, 3.07, and 3.09 (so, six attempts in total) but each combination either failed or, in the case of Odin 1.85, did not move out of Setup Connection.
What is going wrong? Is there something really obvious that I am failing to do? I have the USB Debugging mode enabled on my phone. What else am I doing wrong?
OhHowWeLaughed said:
I followed all of the instructions in that thread, but no luck. I used firmware for both the S5839i I(single file) and the 5830i (multi files) in each of Odin 1.85, 3.07, and 3.09 (so, six attempts in total) but each combination either failed or, in the case of Odin 1.85, did not move out of Setup Connection.
What is going wrong? Is there something really obvious that I am failing to do? I have the USB Debugging mode enabled on my phone. What else am I doing wrong?
Click to expand...
Click to collapse
Follow this.
http://forum.xda-developers.com/showthread.php?t=1840645
Watch the video, do it exactly as he does but use open Australia.
OhHowWeLaughed said:
I followed all of the instructions in that thread, but no luck. I used firmware for both the S5839i (single file) and the S5830i (multi files) in each of Odin 1.85, 3.07, and 3.09 (so, six attempts in total) but each combination either failed or, in the case of Odin 1.85, did not move out of Setup Connection.
What is going wrong? Is there something really obvious that I am failing to do? I have the USB Debugging mode enabled on my phone. What else am I doing wrong?
Click to expand...
Click to collapse
i think you dont understand correctly..just go to this link and follow the instruction..i think this time it will work..
www.firealby.blogspot.in/2013/05/how-to-flash-stock-rom-on-samsung.html?m=1
ѕєηт ƒяσм αcє-ι-cσσρєяνє
amolgosavi said:
i think you dont understand correctly..just go to this link and follow the instruction..i think this time it will work..
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Click to expand...
Click to collapse
I followed your instructions completely, and it worked! THANK YOU VERY MUCH!
Of all the times I have done this, this was the first time I used a bootloader file. Is that what made the difference? Or perhaps it was something else. Right now, I don't care, because I can finally use my phone again! )
Thank you very much for your help on this thread, and for your easy-to-follow videos.
OhHowWeLaughed said:
I followed your instructions completely, and it worked! THANK YOU VERY MUCH!
Of all the times I have done this, this was the first time I used a bootloader file. Is that what made the difference? Or perhaps it was something else. Right now, I don't care, because I can finally use my phone again! )
Thank you very much for your help on this thread, and for your easy-to-follow videos.
Click to expand...
Click to collapse
sooo finally you unbricked your device.. :thumbup:
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Envy-X said:
Follow this.
Watch the video, do it exactly as he does but use open Australia.
Click to expand...
Click to collapse
I did, and it worked! Thank you!
amolgosavi said:
sooo finally you unbricked your device.. :thumbup:
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Click to expand...
Click to collapse
Aaaaaaaand, the S5830i firmware seems to have a lot less of the ridiculous bloatware that came with the original S5839i firmware, so I'm even more happy...
OhHowWeLaughed said:
Aaaaaaaand, the S5830i firmware seems to have a lot less of the ridiculous bloatware that came with the original S5839i firmware, so I'm even more happy...
Click to expand...
Click to collapse
you can flash custom roms also of s5830i
ѕєηт ƒяσм αcє-ι-cσσρєяνє
I was asked to make this one-click to help simplify the process of restoring a stock factory build for our Note 8.0 users. At this time neither myself or @garwynn are planning on releasing a rooted One-Click.
This Odin One-Click.exe contains the Stock GT-N5110 XXDNE1 Bootloader, Kernel, Modem and ROM for the Samsung Galaxy Note 8 16GB Wi-Fi edition (GT-N5110). Yes, that means this comes with the full Knox Bootloader.
There has been no change to the ROM from the initial build released by Samsung.
This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.
This one-click resets your whole device to the stock XXDNE1 experience, similar to a factory restore and it may wipe all data. It also contains the full bootloader and Knox.
Instructions:
1: Backup anything important and Disable any PINs.
During this process your device's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your device, ie on your PC or Dropbox.
2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link
3: Download the XXDNE1 Stock ROM One-Click.
GT-N5110 XXDNE1 Full Restore Unrooted (Compressed Archive).exe (Resets user data)
4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5: Start the Odin One-Click.
Navigate to the location where the "GT-N5110 XXDNE1 Full Restore Unrooted.exe" was saved upon extract from the 7Zip archive.
Double-click on "GT-N5110 XXDNE1 Full Restore Unrooted.exe". *On Vista or newer, you may need to right-click on the file and Run as Administrator.
6: Place device in Download Mode.
- Power device completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.
7: Connect USB cable to PC and device.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.
8: Start Odin flash process.
Press [Start].
9: Complete - PASS!
Status should change to green PASS! At this point your device should automatically reboot.
The boot process will take slightly longer than usual during which time you'll see the Samsung logo screen.
Congratulations! You've flashed the Factory Restore XXDNE1 build!
XDA:DevDB Information
[ROM][ODIN] GT-N5110 XXDNE1 (Modem/Kernel/Bootloader/ROM - Full Restore - Unrooted), ROM for the Samsung Galaxy Note 8.0
Contributors
rwilco12
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-02-09
Last Updated 2015-02-09
Download Link: rwilco12.com/forum/showthread.php?tid=762
n5100
Having trouble loading 4.4.2 bootlader through odin onto my n5100 would it be ok to flash this, then root it and then install the custom n5100 rom of my choice or would I be on tne wrong bootlader and mess my tab up TIA
johnnyk75 said:
Having trouble loading 4.4.2 bootlader through odin onto my n5100 would it be ok to flash this, then root it and then install the custom n5100 rom of my choice or would I be on tne wrong bootlader and mess my tab up TIA
Click to expand...
Click to collapse
I believe it would mess up your bootloader but I don't have a way to verify as I don't have the n5100. Sorry!
Sent from my SPH-L900 using Tapatalk
triangle away
Will this reset the flash counter and allow ota updates? Or do you need to reset flash counter before you do this?
capitoldach said:
Will this reset the flash counter and allow ota updates? Or do you need to reset flash counter before you do this?
Click to expand...
Click to collapse
This won't reset the counter but it won't increment it either. This is a 100% stock unrooted ROM so you'll be able to take OTA's again after flashing.
Can I side load this with ADB? I am currently bricked and looking to start over if I can get my N5110 to install another ROM.
Sent from my SGH-I317 using XDA Premium 4 mobile app
addison892 said:
Can I side load this with ADB? I am currently bricked and looking to start over if I can get my N5110 to install another ROM.
Sent from my SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you're bricked, how do you intend to use ADB?
styles420 said:
If you're bricked, how do you intend to use ADB?
Click to expand...
Click to collapse
I have full access to recovery and download modes.
I am unable to Odin and flash because of partition errors. I plan on using TWRP and the ADB option with Android SDk. Do you think this will work?
I have not been able to Odin . Pit files successfully and re-partition. I am hoping ADB will allow me to put the rom inside the current partitions and use TWRP to flash.
Just a thought. I really don't know what I am doing or how to fix it. But if I have download mode and recovery, I should be able to find a way.
I am currently in a bootloop to recovery.
Thanks for your response and any suggestions you may have.
Sent from my SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:57 PM ---------- Previous post was at 09:48 PM ----------
I have followed the instructions posted here to the letter, but keep getting a FAIL! at the sboot.bin point shortly after starting one-click.
Sent from my SGH-I317 using XDA Premium 4 mobile app
addison892 said:
I have full access to recovery and download modes.
I am unable to Odin and flash because of partition errors. I plan on using TWRP and the ADB option with Android SDk. Do you think this will work?
I have not been able to Odin . Pit files successfully and re-partition. I am hoping ADB will allow me to put the rom inside the current partitions and use TWRP to flash.
Just a thought. I really don't know what I am doing or how to fix it. But if I have download mode and recovery, I should be able to find a way.
I am currently in a bootloop to recovery.
Thanks for your response and any suggestions you may have.
Sent from my SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:57 PM ---------- Previous post was at 09:48 PM ----------
I have followed the instructions posted here to the letter, but keep getting a FAIL! at the sboot.bin point shortly after starting one-click.
Sent from my SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately I don't know that this will work for you at this time. Essentially the one-click is a repackaged TAR. The TAR itself contains image files that correspond to specific partitions on your device. If the partitions on the device don't match up Odin is supposed to throw up a flag and stop the flash in order to prevent bricking the device.
I can't be 100% certain but given the fact it is stopping on sboot.bin, my guess is that the issues you are experiencing probably come from flashing a ZIP bootloader or ROM for another device. If that's the case we might be able to backtrack and undo what you've done so far but this won't work unless you have the right partition structures already in place.
I have spent hours trying to re-partition. The furthest I have gotten is where I am now... Stuck on Get PIT for mapping..
.. In ODIN. I am using the only PIT file for N5110 available on the entire World Wide Web!
☺
Sent from my SGH-I317 using XDA Premium 4 mobile app
hello, could someone please point me in the right direction. I've been trying to use this tool, I have access to stock recovery, when I factory reset it says it can't mount the /system. I tried this tool to reinstall every thing, but it fails at sboot.bin. all the research I've done leads me to believe this has something to do with the bootloader being locked, but I can't find anything about it, I keep getting lead back to this post. If anyone could point me where I need to be to figure this out I would really appreciate it.
Edit: I'm not sure what my problem was, but I eventually downloaded the stock 4.4.2 firmware and was able to flash through Odin and get up and running.
bookofjoshua said:
hello, could someone please point me in the right direction. I've been trying to use this tool, I have access to stock recovery, when I factory reset it says it can't mount the /system. I tried this tool to reinstall every thing, but it fails at sboot.bin. all the research I've done leads me to believe this has something to do with the bootloader being locked, but I can't find anything about it, I keep getting lead back to this post. If anyone could point me where I need to be to figure this out I would really appreciate it.
Edit: I'm not sure what my problem was, but I eventually downloaded the stock 4.4.2 firmware and was able to flash through Odin and get up and running.
Click to expand...
Click to collapse
can you point me in the direction of where you found stock 4.4.2 firmware, looked everywhere for odin flash file
redman2770 said:
can you point me in the direction of where you found stock 4.4.2 firmware, looked everywhere for odin flash file
Click to expand...
Click to collapse
For some reason they post the US version under Cellular South. You'll need to create a free account to download. It took about am hour for me to download with the free account.
http://www.sammobile.com/firmwares/download/30487/N5110UEU2CNE2_N5110XAR2CNE2_XAR.zip/
Does this clean up all the crap left over from many flashes & nandroid backups & restores? I find I have a lot of bits like old directories from previous meddling (mine) & would like to a real clean up back to pristine stock (so I can start meddling again, sort of from scratch so to speak.
Going to run it anyway (meddling again) to see what comes out the other end but was curious 'is all.
Error
This fails for me - on the tablet it says: sw rev. check fail. device:2, binary:1
Trying to flash back to stock after CM12
I've ran the app as administrator, see that is shows in the yellow box: 0:[COM4]
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
I've got the SAME thing goin on as KJarlin does. I'm having to go through Parallels on my Mac as I do not have a Winblows machine. That shouldn't make any difference though. Does anyone have solution???
kjarlin said:
I've ran the app as administrator, see that is shows in the yellow box: 0:[COM4]
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
thewinelover said:
I've got the SAME thing goin on as KJarlin does. I'm having to go through Parallels on my Mac as I do not have a Winblows machine. That shouldn't make any difference though. Does anyone have solution???
Click to expand...
Click to collapse
Still no solution?
dopeismarcus said:
Still no solution?
Click to expand...
Click to collapse
+1
Same error.
Regards
kjarlin said:
This fails for me - on the tablet it says: sw rev. check fail. device:2, binary:1
Trying to flash back to stock after CM12
I've ran the app as administrator, see that is shows in the yellow box: 0:[COM4]
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
thewinelover said:
I've got the SAME thing goin on as KJarlin does. I'm having to go through Parallels on my Mac as I do not have a Winblows machine. That shouldn't make any difference though. Does anyone have solution???
Click to expand...
Click to collapse
dopeismarcus said:
Still no solution?
Click to expand...
Click to collapse
mcpterra said:
+1
Same error.
Regards
Click to expand...
Click to collapse
Not able to verify as I no longer have the Note 8 but if I remember correctly the error you are getting is due to your device having a newer bootloader than the one-click. Most of the time a new bootloader locks out flashing of older bootloaders.
Sent from my Nexus 5X using Tapatalk
Hey guys, recently got mugged for my new S5 and was given a unlocked, bootloop'd S3 i9300 international galaxy s3 (Im from Canada). My buddy told me he had dropped it from about knee high onto carpet when it started having some issues with restarting randomly. He attempted to root it to solve the problems and ended up getting it stuck in a bootloop without the possibility of entering recovery mode. However the phone does go into download mode, so I'm assuming this is a fixable semi brick?
Anyways I started doing my research and found out I should try and reflash the stock firmware using Odin. I found a firmware which I beleive to be the right one, and tried to use Odin.
I got the following message;
Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So I have no idea what this means, as every guide I've seen has said not to touch the PIT button etcetc
I'm not sure if this is helpful, but the writing in download mode is as follows : Odin Mode * Product Name (Blank) * Custom Binary Download : No * Current Binary : Samsung Official * System Status : Custom.
That's about all of the info I have, and seeing how this is the only phone I can afford right now any help would be very much appreciated. Thanks guys.
AlexD73 said:
Hey guys, recently got mugged for my new S5 and was given a unlocked, bootloop'd S3 i9300 international galaxy s3 (Im from Canada). My buddy told me he had dropped it from about knee high onto carpet when it started having some issues with restarting randomly. He attempted to root it to solve the problems and ended up getting it stuck in a bootloop without the possibility of entering recovery mode. However the phone does go into download mode, so I'm assuming this is a fixable semi brick?
Anyways I started doing my research and found out I should try and reflash the stock firmware using Odin. I found a firmware which I beleive to be the right one, and tried to use Odin.
I got the following message;
Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So I have no idea what this means, as every guide I've seen has said not to touch the PIT button etcetc
I'm not sure if this is helpful, but the writing in download mode is as follows : Odin Mode * Product Name (Blank) * Custom Binary Download : No * Current Binary : Samsung Official * System Status : Custom.
That's about all of the info I have, and seeing how this is the only phone I can afford right now any help would be very much appreciated. Thanks guys.
Click to expand...
Click to collapse
Have you tried more than one stock firmware. Where is the phone originally from? I'm not able to find and Canadian firmware.
Darke5tShad0w said:
Have you tried more than one stock firmware. Where is the phone originally from? I'm not able to find and Canadian firmware.
Click to expand...
Click to collapse
I was using UK stock firmwares, but I am unable to flash any firmwares at all successfully due to the error above. It wont go father then the "No Pit".
This try
http://www.ibtimes.co.uk/install-i9300xxugna5-android-4-3-stock-firmware-galaxy-s3-1434726
AlexD73 said:
I was using UK stock firmwares, but I am unable to flash any firmwares at all successfully due to the error above. It wont go father then the "No Pit".
Click to expand...
Click to collapse
Heres the link to the rescue firmware. All the info you gave me says you have pit problems.
This is an emergency firmware that will ever fix or brick the phone but the phone was given to you and you have nothing to lose.
http://forum.xda-developers.com/showpost.php?p=30087735
Darke5tShad0w said:
Heres the link to the rescue firmware. All the info you gave me says you have pit problems.
This is an emergency firmware that will ever fix or brick the phone but the phone was given to you and you have nothing to lose.
http://forum.xda-developers.com/showpost.php?p=30087735
Click to expand...
Click to collapse
The 4.3 download doesn't have the PIT file in it though, I'm guessing that's the important part? Edit *** repartition failed with the 4.1.2
AlexD73 said:
The 4.3 download doesn't have the PIT file in it though, I'm guessing that's the important part? Edit *** repartition failed with the 4.1.2
Click to expand...
Click to collapse
The pit file is in the rescue firmware file. That's the whole point of the rescue firmwares.
I'm sorry I can't help you any further. I'm not going to provide you a pit file etc as I have no knowledge with them or used them.
Sounds to me like it is bricked.
Good Luck.
The power button is stuck, try to flick it some times and it should stop the bootloop. i drop mine when i was getting it out of my pocket last week and same thing happen, the smd switch got stuck and eventually i broke it down trying to get it lose again.
***EDIT*** The problem was that I was trying to flash firmware that wouldn't work on my bootloader version, I was running version 3, and the firmware I tried were all version 2. You can check the bootloader of firmware by starting at the right side of the firmware number, and counting back 5 spots.
Trying to get root, so I am downgrading the firmware, I have had nothing but trouble with it thus far, though. Any help would be appreciated.
SM-G955U - US Cellular Version
G955USQS3CRE2
Bootloader Version 3
Android 8.0.0
History of the phone, tried rooting quite a while ago, softbricked it, then went back to stock rom no problem. Flash forward a few months later, used the SamFail and PartCyborgRom method to have root, did not have mobile data, though, so I went back to stock, again. I was told after a bit that updating the modem would have fixed that issue, but oh well. Now, I want to use the SamFail mehtod to have root again, and fix the modem issue in the phone. I am trying to downgrade the firmware so that this will work.
However nothing is working properly.
List of all firmwares I have tried:
USC-G955USQU1AQDE-20170505162155
USC-G955USQU1AQD9-20170421124057
SM-G955U_1_20170504154313_jk5541apkz_fac
SM-G955U_1_20170620081840_8g9ali6ocz_fac
SM-G955U1_1_20170428100826_id2grime7e_fac
I have uninstalled the Samsung Drivers, rebooted and reinstalled, same for ADB. I have enabled USB Debugging. I can not enable OEM Unlock, locked bootloader.
For the Odin settings I have tried loading just AP. Then All of them. Then everything except for BL. Then all except for CSC.
The options I have checked are Auto Reboot and F. Reset Time.
This is the Odin Log:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4429 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is what it says on my phone in DL mode:
CARRIER: USC
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOM SECUREBOOT: ENABLE
RP SWREV: B3(1.1.1.1.1) K2 S3
SECURE DOWNLOAD: ENABLE
DID 205EBC0B1B52
SW REV CHECK FAIL : (boot)Fused 2 > Binary 1
My phone still works just fine, have not bricked it trying all of these. I am open to all suggestions at this point. I know I had the stock firmware at one point in time, and I am trying to find it at any cost.
KimJongIan said:
Trying to get root, so I am downgrading the firmware, I have had nothing but trouble with it thus far, though. Any help would be appreciated. SM-G955U - US Cellular Version......
Click to expand...
Click to collapse
I don't have this device and there's really not much on the forum regarding the US Cellular variant for your device.
Your best bet is to take a look at the following link to a very good forum that's specific for US Cellular devices.
http://teamuscellular.com/Forum/forum/481-samsung-galaxy-s8/
I don't often recommend members to another forum unless it's a much better solution for what's needed.
When i used to have a US Cellular device (like my older Galaxy S4 that's long gone now) I used to use that forum and it was extremely helpful there.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.