Hi All,
Finally we have indian 16s version of Stock rom.
http:// forum le com /in / eui_detail.html?euiid=206
Downloading it now. Please share your experiences.
Already posted here
Is it not available via OTA??
In case anyone finding difficulty to flash upgrade from OTA, showing error " file .apk not found " please feel free to ask the guidance to fix this error
Mostly this error is shown on rooted devices.
Cheers
Sent from my Le X821 using XDA-Developers mobile app
---------- Post added at 10:14 AM ---------- Previous post was at 10:05 AM ----------
Review on the basis of 36 hrs use.
First impression I don't find any major difference in daily use but few bugs which use to bother are almost gone.
1. Fingerprint sensor response time reduced and more accurate.
2. Camera is more responsive but focus error is still on.
3. Battery same as before . All depends on usage but I am finding charging time is increased than before. Fast charger seems now regular.
4. Games are more responsive and touch seems very sensitive than before.
5. Screen contrasts are enhanced but this causing drain battery.
6.sound quality and noise cancellation is improved while we do outgoing calls.
7. Not having Jio sim so not sure about band added.
8. GPS accuracy is as good as before nothing compromised.
9. Third party apps working fine. I am not using xposed so no comments.
10. Browser experience seems improved, pages load fast on crome browser.
Cheers,
Hope lot more to come.
Regards
Sent from my Le X821 using XDA-Developers mobile app
I've just updated yesterday and i found a bug.
Does it only affect me?
My Wifi doesn't work anymore?
If i activate it, it's getting deactivated suddenly again.
Antisound said:
I've just updated yesterday and i found a bug.
Does it only affect me?
My Wifi doesn't work anymore?
If i activate it, it's getting deactivated suddenly again.
Click to expand...
Click to collapse
WIFI works fine for me and no disconnect on 16S
Wifi is wokring fine for me
Camera focus and images are much improved, especially moving objects are getting captured a little better
Battery life seems to be improved in comparison to stock 15S with same number of extra apps installed
Also just to add, I have clean installed the rom after fully wiping the system.
The data was encrypted, so wiped the data partition and rooted the rom. Everything is working fine. No bugs identified till now, using since last three days.
I just reinstalled but with Chinese 16s... Now everything works flawless again... Dont know what the matter was...
Hi
Quick question : does this have GApps installed already ?
Or will I have to as them manually ?
Regards
Indian version have all basic gapps
On a a separate note : all other apps also in English , Even Leeco apps are useful in India at least to view some movies etc.
NexusPenguin said:
Hi
Quick question : does this have GApps installed already ?
Or will I have to as them manually ?
Regards
Click to expand...
Click to collapse
Nope, is not preinstalled, but it is as easy as installing other apks.
Just go into the LeEco Store and download google play and all the other google apps u need.
You can configure your smartphone as individual as you want.. nice thing
aloklike said:
Also just to add, I have clean installed the rom after fully wiping the system.
The data was encrypted, so wiped the data partition and rooted the rom. Everything is working fine. No bugs identified till now, using since last three days.
Click to expand...
Click to collapse
Data is encrypted? How to disable it? Thanks
yweel said:
Data is encrypted? How to disable it? Thanks
Click to expand...
Click to collapse
Can't be disabled I believe.
I took backup of everything and then booted into TWRP and formated data partition.
After formatting data, without restarting the device, connected to pc and copied the su file and rooted.
Sent from my Le X821 using XDA-Developers mobile app
Antisound said:
Nope, is not preinstalled, but it is as easy as installing other apks.
Just go into the LeEco Store and download google play and all the other google apps u need.
You can configure your smartphone as individual as you want.. nice thing
Click to expand...
Click to collapse
Indian rom has basic gapps available like play store etc. I think its nano gapps.
Chinese version do not have gapps
Sent from my Le X821 using XDA-Developers mobile app
I've got to say that battery life is definite better than with 15s.
I belive the Battery Drain is less than half so fast than before.
Is at least my experience..
Why my PC don't see my phone when it is in TWRP? I have encrypted partition and i'm scared that when i format data partition system won't start.
BeeTrain said:
Why my PC don't see my phone when it is in TWRP? I have encrypted partition and i'm scared that when i format data partition system won't start.
Click to expand...
Click to collapse
When data is encrypted PC will not show it in TWRP/recovery mode.
I started the phone normally and took backup first.
Then booted into TWRP
-wipe - >formatted the data partition
- then i selected mount option -> enable MTP
then i was able to see the phone connected on PC
Go to mount and enable mtp
Sent from my Le X820 using Tapatalk
Hello I have a question. I want to install the official rom but I actually work with the resurrection rom and unofficial recovery. Can I flash the 16s official with that recovery without brick my phone?
Sent from my Le X820 using XDA-Developers mobile app
Related
Q&A for [ROM][KITKAT] Unofficial CyanogenMod 11 for Galaxy Express 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
thank you The Whisp
Thanks for the Q&A tab.
I have one question, can anyone please confirm if the light sensor is working? The proximity works just fine but the light sensor doesn't. I would like to know if this is a problem of my device only or from the rom.
If you don't know there is a great light app to test in the playstore. Sensor Test
Please can anyone confirm before i open a thread in github, thanks
I have one question that is making me a bit confused.. So i'm using TheWhisp build for some time now and that sure means that i have my device rooted. Every time that i install and open an app that need root permission i'm prompted with the superuser permission setting. So i'm deffenetly sure that my device is rooted and that my device does have supersu / superuser.
What i don't know is.. which one is it? Supersu by Chanfire (that i suspect because i used his auto-root method) or if the device has superuser. I don't find the app anywhere and it isn't hidden nor protected.
Why am i asking this? Because while browsing a bit in the xda forum i found out that chainfire update his app giving adding more protection. Now.. i don't know if i can install the superSu from the playstore or if i need to.
Sorry for all the questions but..the more i read about android the more i found that i know nothing. thank you.
shinra00 said:
I have one question that is making me a bit confused.. So i'm using TheWhisp build for some time now and that sure means that i have my device rooted. Every time that i install and open an app that need root permission i'm prompted with the superuser permission setting. So i'm deffenetly sure that my device is rooted and that my device does have supersu / superuser.
What i don't know is.. which one is it? Supersu by Chanfire (that i suspect because i used his auto-root method) or if the device has superuser. I don't find the app anywhere and it isn't hidden nor protected.
Why am i asking this? Because while browsing a bit in the xda forum i found out that chainfire update his app giving adding more protection. Now.. i don't know if i can install the superSu from the playstore or if i need to.
Sorry for all the questions but..the more i read about android the more i found that i know nothing. thank you.
Click to expand...
Click to collapse
Did you enable developer options in setting about phone?
In the Settings app, select About Phone.
Scroll down, and tap the Build number entry seven times. On the seventh tap, you will be notified that "You are now a developer".
You can also flash supersu from cwm or philz recovery or install it on playstore.
After you can Go into SuperSU > Settings > Make sure "Respect CM root settings" is unchecked.
averelstone said:
Did you enable developer options in setting about phone?
In the Settings app, select About Phone.
Scroll down, and tap the Build number entry seven times. On the seventh tap, you will be notified that "You are now a developer".
You can also flash supersu from cwm or philz recovery or install it on playstore.
After you can Go into SuperSU > Settings > Make sure "Respect CM root settings" is unchecked.
Click to expand...
Click to collapse
thank you very much for such a detailed explanation averelstone! had no idea about these hidden menus..
One last question, the new option in the setting is called Superuser, does this mean that the app is superuser? (confront with supersu from CF) I cannot find any information about it in the settings, since there is no "about"
Thank you in advance for your time to explain me this stuff. cheers
shinra00 said:
thank you very much for such a detailed explanation averelstone! had no idea about these hidden menus..
One last question, the new option in the setting is called Superuser, does this mean that the app is superuser? (confront with supersu from CF) I cannot find any information about it in the settings, since there is no "about"
Thank you in advance for your time to explain me this stuff. cheers
Click to expand...
Click to collapse
You're welcome Shinra00, Superuser is integrated into CyanogenMod 11, you can manage your rooted apps into it.
About phone is on setting of CM, you Scroll down, and tap the Build number entry seven times it enable the developper option for activate or desactivate root for apps and ADB.
I don't know much about superuser i use supersu for my apps.
Encryption problem
First of all, hello and thanks for an awesome rom for my Galaxy Express 2!
I've been using this rom for a good three months and it works flawlessly. The problem i have is that i have encrypted my phone, and now when i tried rebooting it it says the password is wrong. I am 300% sure that i am typing the correct password. I have tried restoring to factory setting and reflashing the rom with no success. I still get asked for the password. Also, when i reset to factory settings it says "Error mounting /data!". What can i do ? Is my phone rendered useless ?
terentehaiducu said:
First of all, hello and thanks for an awesome rom for my Galaxy Express 2!
I've been using this rom for a good three months and it works flawlessly. The problem i have is that i have encrypted my phone, and now when i tried rebooting it it says the password is wrong. I am 300% sure that i am typing the correct password. I have tried restoring to factory setting and reflashing the rom with no success. I still get asked for the password. Also, when i reset to factory settings it says "Error mounting /data!". What can i do ? Is my phone rendered useless ?
Click to expand...
Click to collapse
Hello,
you can try to format data from CWM , it's in mount and storage, it will remove encryption.
The problem is CWM does not support reading encrypted partitions.
You can use ADB but the more simple is to use odin and back to stock ROM and reflash CM.
problème
Bonjour,
J'ai un problème des que je lance l'installation une erreur intervient.. "error statut 7, installation aborded" j'ai le recovery 6.0.4.9 ..
Quelqu'un peut m'aider ?
Si oui vous pouvez me répondre par émail ou sur le forum [email protected]
Merci d'avance.
averelstone said:
Hello,
you can try to format data from CWM , it's in mount and storage, it will remove encryption.
The problem is CWM does not support reading encrypted partitions.
You can use ADB but the more simple is to use odin and back to stock ROM and reflash CM.
Click to expand...
Click to collapse
THnaks for your answer. I did indeed tried to delete the data with no success. Finally, i found a guide on the internet describing how to use ADB to remove the encryption. It worked flawlessly.
terentehaiducu said:
THnaks for your answer. I did indeed tried to delete the data with no success. Finally, i found a guide on the internet describing how to use ADB to remove the encryption. It worked flawlessly.
Click to expand...
Click to collapse
Hi, make a small guide and post it here so that in future there is one more source online and it may be easier to find a solution. Thanks
terentehaiducu said:
THnaks for your answer. I did indeed tried to delete the data with no success. Finally, i found a guide on the internet describing how to use ADB to remove the encryption. It worked flawlessly.
Click to expand...
Click to collapse
Good to know, glad you got it sorted.
shinra00 said:
Thanks for the Q&A tab.
I have one question, can anyone please confirm if the light sensor is working? The proximity works just fine but the light sensor doesn't. I would like to know if this is a problem of my device only or from the rom.
If you don't know there is a great light app to test in the playstore. Sensor Test
Please can anyone confirm before i open a thread in github, thanks
Click to expand...
Click to collapse
As far as I know Samsung galaxy express 2 doesn't have light sensor
Hey how's it going?
One question, how do you guys perform the change of rom? Full wipe and clean install of rom or is it possible to just flash the zip on top of the previous rom?
I'm asking this because I'm having problems since the previous 2 builds to restore everything with titanium backup. If i do the batch restore of all missing apps + sistem when i restart i get stuck at the boot.
And as you know to configure every app and setting is really troublesome..
How are you updating every build? I would appreciate if you can tell me your method.
Thank you
shinra00 said:
Hey how's it going?
One question, how do you guys perform the change of rom? Full wipe and clean install of rom or is it possible to just flash the zip on top of the previous rom?
I'm asking this because I'm having problems since the previous 2 builds to restore everything with titanium backup. If i do the batch restore of all missing apps + sistem when i restart i get stuck at the boot.
And as you know to configure every app and setting is really troublesome..
How are you updating every build? I would appreciate if you can tell me your method.
Thank you
Click to expand...
Click to collapse
Hi shinra00,
I always flash on top of previous version but if i have issue i do a full wipe ( factory reset, format data) and restore my app with TB.
with same android version you can flash on top safely most of time, depend of people, few prefer perform a full wipe, other dirty flash
About your TB error it's strange, i never have issue when i restore my app.
MHL - HDMI-out
averelstone said:
Hi shinra00,
I always flash on top of previous version but if i have issue i do a full wipe ( factory reset, format data) and restore my app with TB.
with same android version you can flash on top safely most of time, depend of people, few prefer perform a full wipe, other dirty flash
About your TB error it's strange, i never have issue when i restore my app.
Click to expand...
Click to collapse
Thank you for the reply averstone
I´ve got one more though.. the other day i discovered the power of MHL - HDMI-out and i got fascinated to find that i could go to anywhere without a pc and display movies on any tv that has hdmi.
On samsung official website with all the specs, the connectivity specs shows micro-usb 2. On other sites it shows micro-usb 2 (MHL).
4 days ago i was on a tech store and tried a mhl adapter without any success. The person that was helping me said that there could be 2 causes, lack of mhl hardware support or lack of mhl coding in the cm11 rom (yup he knew what cm11 was). After a litle browse online i found out that in fact can be a lack of code in the rom as it happened for galaxy 2 (http://forum.xda-developers.com/showthread.php?t=2000135)
So has anyone tried mhl -hdmi-out with this device? Can anyone confirm me if it has hardware compatibility?
Thank you very much
shinra00 said:
Thank you for the reply averstone
I´ve got one more though.. the other day i discovered the power of MHL - HDMI-out and i got fascinated to find that i could go to anywhere without a pc and display movies on any tv that has hdmi.
On samsung official website with all the specs, the connectivity specs shows micro-usb 2. On other sites it shows micro-usb 2 (MHL).
4 days ago i was on a tech store and tried a mhl adapter without any success. The person that was helping me said that there could be 2 causes, lack of mhl hardware support or lack of mhl coding in the cm11 rom (yup he knew what cm11 was). After a litle browse online i found out that in fact can be a lack of code in the rom as it happened for galaxy 2 (http://forum.xda-developers.com/showthread.php?t=2000135)
So has anyone tried mhl -hdmi-out with this device? Can anyone confirm me if it has hardware compatibility?
Thank you very much
Click to expand...
Click to collapse
I did not know we can use micro-usb for HDMI, you can try to grab a logcat when you connect adapter and report error and ask to TheWhisp.
Maybe someone with adapter could try on stock, i don't have adapter myself and have no plan to buy it for the moment but thanks you for sharing this.
Express 2 cm rom
Hi , the build is pretty stable and really smooth. Got no bugs so far , BUT , the big but is the battery life. It dropped at about 60% of the life on the official 4.4.2. Any suggestions?
roborovsky said:
Hi , the build is pretty stable and really smooth. Got no bugs so far , BUT , the big but is the battery life. It dropped at about 60% of the life on the official 4.4.2. Any suggestions?
Click to expand...
Click to collapse
Hello,
i don't have this battery issue, try to calibrate battery, there is many tutorial on xda. You can install some good apps like greenify, BetterBatteryStats, Wakelock Detector, Amplify, for manage battery and wakelocks.
Q&A for [ROM][Sep 25][4.4.4] I9100 AOSP NeatROM v8.0st
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
security settings crushing, and all is sloww
Hi there all
I have flashed this ROM 2 days ago and found it very good and fast.
Today i have played with the security (lock screen & apps permissions), i have chooses the face recognition for the screen-lock and a default security for all new apps.
Now all is so slow and cannot get into the security settings, it is crushing !
Please help.
I do not want to factory reset, i have already restored all my contact and apps, do not have the time to do this again.
Thank you all
My huge thanks to the developers of this amazing ROM. I really appreciate your work. With Apolo Kernel works perfect! Thank you.
eli1967 said:
Hi there all
I have flashed this ROM 2 days ago and found it very good and fast.
Today i have played with the security (lock screen & apps permissions), i have chooses the face recognition for the screen-lock and a default security for all new apps.
Now all is so slow and cannot get into the security settings, it is crushing !
Please help.
I do not want to factory reset, i have already restored all my contact and apps, do not have the time to do this again.
Thank you all
Click to expand...
Click to collapse
Eli,
I've been using the v8st for over 20 days now and have not come across such an issue.
But I have a different issue though:
The bluetooth mic levels when connected to the car's audio system renders very low voice that the person on the other end can't hear me so good.
Hope someone with a similar issue like yours' should be able to help you soon!
gps always on
Hello, i recently use this rom and find that may gps is always on in my battery usage even if i already turn off the location setting, how can i turn off my gps? Before this i found that my wifi also always on but i can turn it off by going to setting-->wifi-->advanced-->keep wifi and set always on when sleep to never, is there also settings like this for gps? Thankyou
Hi
Even by doing as per Post# 4, Wallpaper gets replaced but does not work.
Going by wallpaper details found MD5 error.
Few more issues on my device, new to this ROM. Flashed 2 days back.
1. How to increase the FONT & ICON size in Status bar, Key board letters are too small, notifications are small.
2. Screen and around the camera gets heated, during this time battery drains super fast.
3. BBS is not working, error message "Battery service could not be contacted"
Please help me with the above issues.
Thanks in advance
Sent from my GT-I9100 using Tapatalk 2
sunnyhot said:
Hi
Even by doing as per Post# 4, Wallpaper gets replaced but does not work.
Going by wallpaper details found MD5 error.
Click to expand...
Click to collapse
What post #4 are you talking about? What does not work? What gives you an MD5-error. Please be more specific.
sunnyhot said:
1. How to increase the FONT & ICON size in Status bar, Key board letters are too small, notifications are small.
Click to expand...
Click to collapse
You need to change the display density setting. Open the file /system/build.prop with a text editor and search for the line ro.sf.lcd_density=182. Change the value to something else. Bigger numbers give you bigger icons and fonts. The Default for SGS2 Roms is normally 240, Neatrom uses 182, that's why everything is smaller than on most roms. If you want to use 240, you can also flash this ZIP in Recovery: View attachment Density_240_v8.0st.zip. It's just a modified build.prop for 8.0st. There are also apps on the PlayStore that can change the density for you, but I never tried them.
sunnyhot said:
2. Screen and around the camera gets heated, during this time battery drains super fast.
Click to expand...
Click to collapse
Without more info it's impossibe to know what is draining your battery. You need to find out the app that gives you trouble with BBS or similar app.
sunnyhot said:
3. BBS is not working, error message "Battery service could not be contacted"
Click to expand...
Click to collapse
In Android KitKat, user apps are not allowed to access battery stats. It's part of Androids security policy. There's two ways to fix it:
Get Xposed Installer and install the Xposed Framework. Then, download the module Enable BatteryStats Permission - voila! Since Xposed is simply awesome for other tasks as well, I recommend this method.
If for some reason you don't want to use Xposed (e.g. if you use ART), then you have to convert BBS to a system app. There's several ways to do so, like Titanium Backup or Link2SD... However make sure that BBS gets installed in /system/priv-app/, and not in /system/app/, or else it will still not get the necessary rights.
Hi is there a way to reboot into recovery except from the home + volume + wake and also which Version of Apolo is the right one 7.1 CM?
Battery life?
Hi guys, was checking this rom out and it looks awesome!
How's the battery life though?
I'm currently on Resurrection Remix and the battery life when I have wifi on is really poor.
I'm basically looking for a 4.4.4 rom that gives maximum battery life.
Also are there any kernel recommendations?
Thanks!
Weird battery behaviour
Hello Guys. I met a very strange issue.
After flashed the ROM, the battery indicator acts very weird.
When the phone is fully charged, and I remove the charger. after reached 85%, and when the battery is gong down, the indicator is going up from 85% to 90 %.
Anybody met this ? and how to resolve ?
I already calibrated the battery, but the problem still on.
Click to expand...
Click to collapse
Try another batterry. I was facing the problem with an almost dead battery. With another one it's fixed.
---------- Post added at 01:39 PM ---------- Previous post was at 01:25 PM ----------
phirey said:
Hi guys, was checking this rom out and it looks awesome!
How's the battery life though?
I'm currently on Resurrection Remix and the battery life when I have wifi on is really poor.
I'm basically looking for a 4.4.4 rom that gives maximum battery life.
Also are there any kernel recommendations?
Thanks!
Click to expand...
Click to collapse
I'm running this with Apolo V0 kernel and I'm satisfied (on original Samsung 2000 mAh battery):
~33% a day of normal usage
~1% an hour idle (data on, sync on, location on)
~0.3% an hour night mode (data off, sync off, phone online) - translates to ~14 days of runtime
Have tweaked wakelocks/services.
---------- Post added at 01:44 PM ---------- Previous post was at 01:39 PM ----------
txx3 said:
Hi is there a way to reboot into recovery except from the home + volume + wake and also which Version of Apolo is the right one 7.1 CM?
Click to expand...
Click to collapse
1. You can configure advanced power options to be able to reboot into recovery from a running ROM
2. Yes CM is the right Apolo for NeatROM (having superuser integrated)
Having troubles with wifi connection since this morning... My S3 and laptop works just fine but with s2 cant connect to apps like viber, whatsapp or hayday
DELETED
Today formatted extsdcard to FAT32, still I see media scanner issue.
What could be the problem? Pls help guys
Sent from my GT-I9100 using Tapatalk 2
sunnyhot said:
Today formatted extsdcard to FAT32, still I see media scanner issue.
What could be the problem? Pls help guys
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I had the same problem of battery drain because of mediascanner service running all the time and i didnt know the exact fix but i have read somewhere that formatting sd card would help fix this and it did, Anyway i didnt use much of my extSD so i removed it for now!! And no battery drain observed with mediascanner service
I can't get this to run on my phone. After carefully following the instructions my phone is stuck on the first boot screen with the yellow exclamation mark. Strangely it seems like I have TWRP installed which I can't get rid of. Even after installing the CWM linked to, the next time I manually enter recovery TWRP opens.
Update: Sucessfully installed a Cyanogen based ROM instead. Shame, I would have liked to try this one.
GAPPS not working?
Hi there, please help me. I can't get gapps to work/install. I first flashed beta version...nothing, then tried the stable version and only Chrome appeared in appdrawer. I still can't access play store (from the Nova Launcher menu option), the browser that came with the NeatRom doesn't start.
The rooting, flashing of the rROM etc all went well, according to the instructions, the only thing was that I couldn't format /preload as there was no such option in the CWM recovery. Could that be the problem maybe?
Please tell me, what am I missing here...
jokl81 said:
Hi there, please help me. I can't get gapps to work/install. I first flashed beta version...nothing, then tried the stable version and only Chrome appeared in appdrawer. I still can't access play store (from the Nova Launcher menu option), the browser that came with the NeatRom doesn't start.
The rooting, flashing of the rROM etc all went well, according to the instructions, the only thing was that I couldn't format /preload as there was no such option in the CWM recovery. Could that be the problem maybe?
Please tell me, what am I missing here...
Click to expand...
Click to collapse
No, Preload is not used in AOPS Roms, only at Sammy ROMs.
maybe your download of GAPPS or ROM is corrupted, check the MD5 file to see if there is any thing wroing.
Clear Cache from Recovery
Try to reboot
Try to re-install.
Somtimes something goes wrong and then you have effects as you mentioned.
GeScha said:
No, Preload is not used in AOPS Roms, only at Sammy ROMs.
maybe your download of GAPPS or ROM is corrupted, check the MD5 file to see if there is any thing wroing.
Clear Cache from Recovery
Try to reboot
Try to re-install.
Somtimes something goes wrong and then you have effects as you mentioned.
Click to expand...
Click to collapse
Sorry, but I gave up over AOSP and flashed the "stock" NeatRom 6.4 w/o any problems. Runs great!
Still, when I was searching for a solution, I found out, that it is possible that I didn't make a nandroid backup of /preload (when I was still on rooted stock samsung ROM - before flashing kitkat cwm and later AOSP NeatRom). I read that in the CWM recovery that comes with Siyah kernel - which I used to make a nandroid backup - you have to manually select to make a backup of the /preload part. in addition to all others... And i really didn't find a file with "preload" in the nandroid backup folder that I copied to my PC. If so, I am suppose to have trouble when/if going back to stock samsung ROM? If that is the case, maybe it would be good to update the guide for flashing the KitKat-based AOSP NeatRom. I don't really care right now, because I really like the stock NeatRom...I just hope it'll work...
NeatRom 8.0st and TWRP - no restore possible
Hi all,
hope, one of you will be able to support me ?
I'm not able to restore any of my TWRP backups done with TWRP 2.7.1.0 which came with the ROM.
All backups went well and were flagged as 'successfully'.
However, trying to restore one of them failes every time. It looks like after restoring SYSTEM and starting with DATA, it stucks.
One 'failed', no error code or any additional information.
I've a 32 GB SD installed on my i9100 and this is where I store all the TWRP backups.
Copying them to internal storage does not help.
Any ideas ?
Thx in advance,
BR,
This is a good room
Hello, community! I was wondering if there's any Android 6 rom for LG Optimus L7 II (P712). I was told that CyanogenMod supports through CM13 a lot of LG devices but P712. But I decided to give it a shot anyway and I will share my experience with you.
I took the risk yesterday and I installed CM13 on my cel phone. The installation process was perfect (I used ClockworkMod Recovery), I also installed Gapps perfectly. I rebooted my device and it loaded and updated all the apps (it took like 10 minutes). After that, I had to setup my wifi network, google account, etc. Everything was good so far, but then, when the menues loaded my camera and radio fm weren't shown. The rest of the apps were right there and it recognized my wifi and mobile service provider like a charm (I called and texted myself from another phone). But... after a couple of minutes a pop-up started to show up saying "Unfortunately, Android keyboard (AOSP) has stopped" and since there, it was a nightmare haha. I couldn't access to my keyboard at all. I understand it's an issue with CyanogenMod and they are trying to fix it.
But after that situation, I decided to flash my device using "Flash Tools 2014" and Android 4.4. If any of you know about another rom with android 6, please let me know. Thanks in advance!
What gapps was used,and which cm13 build?Seems P712 is all like my P713,and on mine i got no lags(excepting camera app,just needs to install another camera and delete stock one).
DS_katauri said:
What gapps was used,and which cm13 build?Seems P712 is all like my P713,and on mine i got no lags(excepting camera app,just needs to install another camera and delete stock one).
Click to expand...
Click to collapse
Hi DS_katauri, thanks for your reply. About gapps, I tried to install different packages (mini, full, nano, stock), I downloaded them from opengapps. But it seems many people are reporting issues like the one I had. Btw, the rom I used was the "cm-13.0-20160330-UNOFFICIAL-vee7-RC2" (I'm a new user so I can't attach links... I downloaded it from androidfilehost, the user who uploaded it has useful things there). Thanks again, for your reply!!
dafaher said:
the rom I used was the "cm-13.0-20160330-UNOFFICIAL-vee7-RC2" !
Click to expand...
Click to collapse
Yep,Neutrondev made a lot of pretty things for our LG.
About ROM,try this one(latest build from Weritos) ,use version for 713 and gapps provided.IDK will CWM work,if no use Neutrondev's TWRP 3.020.Also,gapps should be installed after ROM but before 1st start.Lags are - built-in camera(use snap hdr and delete stock camera and gallery via root),wifi(sometimes connects only manual),no function on qmemo button(not critical at all)...And a specific feature - no internal card only SDcard I'm using it now(actually writing from it).Only three apps make me angry,katemobile(russian vk.com social network alternative client) - can stuck phone(idk why),viber v5x or v6x(both can FC in unknown reason,v4x all okay),and Opera4android(chinese idiots forget the "clean cache" button).
Oh,and launcher,Nova still remains the best.
Good luck and don't forget to backup your current ROM to SD.
Hi DS_katauri, thanks for your reply and all the info you shared with me. Unfortunately, it didn't work on my smartphone. Yesterday, I installed the rom and gapps by Weritos but the camera didn't work at all, it kept asking me for my sd-card (even after I formatted it). For the same reason, I couldn't download photos, take screenshots or anything. And I couldn't install whatsapp because it wasn't compatible with my device anymore, so I had to give up. Thanks anyway for all your help!!
dafaher said:
Hi DS_katauri, thanks for your reply and all the info you shared with me. Unfortunately, it didn't work on my smartphone. Yesterday, I installed the rom and gapps by Weritos but the camera didn't work at all, it kept asking me for my sd-card (even after I formatted it). For the same reason, I couldn't download photos, take screenshots or anything. And I couldn't install whatsapp because it wasn't compatible with my device anymore, so I had to give up. Thanks anyway for all your help!!
Click to expand...
Click to collapse
I told U to try snap camera,then play with settings to allow writing on sd(this stuff makes me mad too)Also,opencamera and first version of CyanogenCamera should work too.And,whatsapp,install it not from market.
Will look on new release of Weritos CM13 soon,probably it will help
Hey Everyone!
Just like most other Z5C users, my phone is running terribly slow. I just "upgraded" to 7.1.1 a couple days ago in hopes that it would fix how laggy it is, but it's still the same performance issues. I'll be listening to music and all of a sudden it stops, I can't take pics with my camera, app icons take forever to show up on homescreen, everything I switch between cache reloads, etc. I'm done with it.
I want to downgrade to 7.0, since it was the last stable upgrade I can recall. (Unless there's another solution to improving my phone's performance)
However, I have no knowledge of how to downgrade. I'm a total noob. Many of the youtube videos I've found are of terrible quality or are difficult to understand or require that I have my phone rooted.
I'd prefer to leave my phone unrooted. I guess I just need a link to the correct resources I need and has all the steps, then I can figure it out from there. OR if there's a better route to kicking my phone into the shape it should be in.
PS. Got a screenshot attached to show my phone's performance. It's currently using 1.7GB and has 38MB of free memory.
Mine works fine, 7.1.1. In my experience, it performs the same as 7.0 and even sometimes suppresses 7.0.
You will need to download XperiFirm and Flashtool first.
You can follow this tut to create ftf from the files you download: http://www.xperiablog.net/2014/08/1...re-files-using-xperifirm-and-flashtool-guide/
Note that you do not need to decrypt files since XperiFirm does that for you. You just need to create bundle from those files.
Also this tut: http://www.xperiablog.net/2016/03/12/install-xperia-marshmallow-using-flashtool-and-xperifirm-guide/ here teach you how to flash firmware you create.
mlleemiles said:
Mine works fine, 7.1.1. In my experience, it performs the same as 7.0 and even sometimes suppresses 7.0.
You will need to download XperiFirm and Flashtool first.
You can follow this tut to create ftf from the files you download: http://www.xperiablog.net/2014/08/1...re-files-using-xperifirm-and-flashtool-guide/
Note that you do not need to decrypt files since XperiFirm does that for you. You just need to create bundle from those files.
Also this tut: http://www.xperiablog.net/2016/03/12/install-xperia-marshmallow-using-flashtool-and-xperifirm-guide/ here teach you how to flash firmware you create.
Click to expand...
Click to collapse
no bugs or lags ,what so ever?
there's a big list about 10bugs
ive readed fresh install fix lots of them (but not all of them)
Superrman said:
no bugs or lags ,what so ever?
there's a big list about 10bugs
ive readed fresh install fix lots of them (but not all of them)
Click to expand...
Click to collapse
Most users have reported a clean install helps, yes.
trax7 said:
Most users have reported a clean install helps, yes.
Click to expand...
Click to collapse
Thanks, i did update (sort of clean.. i just cleaned Data cache)
mostly seems to work okay (now im 24hours with 7.1.1)
i cant recored calls anymore , is not OS bug, i can handle it i guess.(find other app).
i still got the 1 anoying bug (only ringtone i can hear only in the left speaker(sidedown)
Superrman said:
Thanks, i did update (sort of clean.. i just cleaned Data cache)
mostly seems to work okay (now im 24hours with 7.1.1)
i cant recored calls anymore , is not OS bug, i can handle it i guess.(find other app).
i still got the 1 anoying bug (only ringtone i can hear only in the left speaker(sidedown)
Click to expand...
Click to collapse
Do a full clean install. Or try to flash a sound mod, maybe that can help.
Hello,
On my le max 2 I had uploaded rom RR but I wanted to try MIUI10 and unfortunately the phone is blocked. I only have access to TWRP but neither the RR backup nor any other custom rom that I have in the phone's memory do not load. The phone starts with a failed mount system message. How can I restore factory settings as I only have 3.2.3-0 twrp or fastboot mode. Will downloading the original rom help and how to do it.
I will be grateful for your help.
Try lineage. Directly from their website.
Before install, wipe system, cache, and data partitions. You could wipe internal storage as well, but that'll cause you to lose everything on the phone (pictures not yet backed up, etc).
Then drop the file on the internal storage and install it. Followed by gapps of your choice.
See if that helps.
I use lineage since day one (the stock ROM had notifications in Chinese pop up and since I don't read Chinese, that started getting annoying very quickly)
The phone is officially supported and I get regular OTAs... Nightly, but still regular.
The IR port doesn't work (there is a workaround which requires root and xposed)
Stock camera app also doesn't work, but Open Camera or Camera FV5 (or any other camera app for that matter) does the trick.
Hope this helps.
Sent from my LEX820 using Tapatalk
I would like to inform everyone that I have restarted my le max 2 820 phone, I uploaded the original Chinese rom 16s and the phone took off then TWRP custom rom RR and it's ok
greetings
Nurchi said:
Try lineage. Directly from their website.
Before install, wipe system, cache, and data partitions. You could wipe internal storage as well, but that'll cause you to lose everything on the phone (pictures not yet backed up, etc).
Then drop the file on the internal storage and install it. Followed by gapps of your choice.
See if that helps.
I use lineage since day one (the stock ROM had notifications in Chinese pop up and since I don't read Chinese, that started getting annoying very quickly)
The phone is officially supported and I get regular OTAs... Nightly, but still regular.
The IR port doesn't work (there is a workaround which requires root and xposed)
Stock camera app also doesn't work, but Open Camera or Camera FV5 (or any other camera app for that matter) does the trick.
Hope this helps.
Sent from my LEX820 using Tapatalk
Click to expand...
Click to collapse
also flash firmware (as without firmware, you may experience frequent reboots), you can download it from XDA + lineage for le max 2 first page, cheers.........