Honor 5x (KIW-L24)
honestly i've been looking for the answer for the past 4 days and finally i decided to signup for xda and see if anyone can help. i'm a newb at all this flashing stuff but always willing to figure things out. please point me in the right direction.....Thanks!!!
trying to flash one of the newest nightly cm 13 from 8/13 using twrp. I'm stuck there since the install zip keeps failing. it says:
Installing zip file '/sdcard/dloads/cm-13.0-20160813-nightly-kiwi.zip'
checking for md5 file...
skipping md5 check: no md5 file found
comparing tz version tz.bf.3.0.c3-00025 to tz.bf.3.0.c3-00022
assert failed: kiwi.verify_trustzone("tz.bf.3.0.c3-00025") ==1
updater process ended with error: 7
error installing zip file '/sdcard/dloads/cm-13.0-20160813-nightly-kiwi.zip'
jmons said:
honestly i've been looking for the answer for the past 4 days and finally i decided to signup for xda and see if anyone can help. i'm a newb at all this flashing stuff but always willing to figure things out. please point me in the right direction.....Thanks!!!
Click to expand...
Click to collapse
Seriously ? 4 Days ?
Do you even read the OP of the CM13 thread ?
This is why you can't flash CM13:
jmons said:
comparing tz version tz.bf.3.0.c3-00025 to tz.bf.3.0.c3-00022
assert failed: kiwi.verify_trustzone("tz.bf.3.0.c3-00025") ==1
Click to expand...
Click to collapse
Your Trust Zone (TZ) is not the right version, to update it, you must flash a stock MM ROM first, then you can flash CM13.
Everything you need to know is here, in the Honor 5X section.
edit: I just saw you have posted the same question here....
jmons said:
Honor 5x (KIW-L24)
honestly i've been looking for the answer for the past 4 days and finally i decided to signup for xda and see if anyone can help. i'm a newb at all this flashing stuff but always willing to figure things out. please point me in the right direction.....Thanks!!!
trying to flash one of the newest nightly cm 13 from 8/13 using twrp. I'm stuck there since the install zip keeps failing. it says:
Installing zip file '/sdcard/dloads/cm-13.0-20160813-nightly-kiwi.zip'
checking for md5 file...
skipping md5 check: no md5 file found
comparing tz version tz.bf.3.0.c3-00025 to tz.bf.3.0.c3-00022
assert failed: kiwi.verify_trustzone("tz.bf.3.0.c3-00025") ==1
updater process ended with error: 7
error installing zip file '/sdcard/dloads/cm-13.0-20160813-nightly-kiwi.zip'
Click to expand...
Click to collapse
lol, update your phone to MM and it will install no problem
mooms said:
Seriously ? 4 Days ?
Do you even read the OP of the CM13 thread ?
This is why you can't flash CM13:
Your Trust Zone (TZ) is not the right version, to update it, you must flash a stock MM ROM first, then you can flash CM13.
Everything you need to know is here, in the Honor 5X section.
edit: I just saw you have posted the same question here....
Click to expand...
Click to collapse
Thanks for the info I'll try not to act like a total newb. I tried to follow the cm install that is everywhere but nothing was ever said about MM. This is all new to me. Thanks!!!!
clsA said:
lol, update your phone to MM and it will install no problem
Click to expand...
Click to collapse
Thanks so much! I never saw that on the how to pages for cm install.
jmons said:
Thanks for the info I'll try not to act like a total newb. I tried to follow the cm install that is everywhere but nothing was ever said about MM. This is all new to me. Thanks!!!!
Click to expand...
Click to collapse
You should read more carefully:
crpalmer said:
Requirements
* You must read this post completely
* You must have flashed a stock MM update to update the firmware to a version that is compatible with these builds. Search xda for the best way to do so for your device.
Click to expand...
Click to collapse
mooms said:
You should read more carefully:
Click to expand...
Click to collapse
Thanks Dad.
Be glad someone took the time to answer you...
mooms said:
Be glad someone took the time to answer you...
Click to expand...
Click to collapse
It wasn't you that gave me the answer..... you just copied someone elses answer and acted like a know it all.
jmons said:
It wasn't you that gave me the answer..... you just copied someone elses answer and acted like a know it all.
Click to expand...
Click to collapse
I was the first to answer you, I didn't copied anything, but, unlike you, I can read a whole post....
mooms said:
I was the first to answer you, I didn't copied anything, but, unlike you, I can read a whole post....
Click to expand...
Click to collapse
Well i guess you are getting forgetfull go back and read what you responded. there was no help all you did was copy clsa's response to me on my other post. the original post was moved for me by assist since i had never used this site before. I already said thanks, don't be such a troll just looking for newbs to harrass, obviously you have nothing better to do..
( it was clsa that showed me i needed mm and you just copied his response)
jmons said:
Well i guess you are getting forgetfull go back and read what you responded. there was no help all you did was copy clsa's response to me on my other post. the original post was moved for me by assist since i had never used this site before. I already said thanks, don't be such a troll just looking for newbs to harrass, obviously you have nothing better to do..
( it was clsa that showed me i needed mm and you just copied his response)
Click to expand...
Click to collapse
I think you actually have reading issues...or you're acting in bad faith.
Your question (and the answer) have already been asked (and answered) several dozens times, hence my sarcastic tone, but I still took the time to answer you on 17th August 2016, 10:38 PM:
mooms said:
Your Trust Zone (TZ) is not the right version, to update it, you must flash a stock MM ROM first, then you can flash CM13.
Click to expand...
Click to collapse
As everyone can see, I was the first to answer, I don't copied anything.
I saw five minutes later that you have made an other post with the same question (this is a bad habit) and that halomademeapc also answered you there...I have even edited my post to reflect it, and it was still one minute before clsA post his answer.
I have also explained why (trust zone mismatch version), how can I copy something not explained by anyone else on any of your two thread ?
So please stop lying.
Someone please close this thread!
Sent from my KIW-L24 using Tapatalk
You should on stock marshmallow, and the latest TWRP
Related
hi i accidentaly upgrade to a liked 2.1 because i taught these guy http://forum.xda-developers.com/showthread.php?t=646595&page=3 #23
had the correct PB00IMG on he's blog
what does that even mean?
It means the emperor is wearing No Pants.
I could understand mistakenly updated but accidentally? How does one accidentally update their phone?
Is it like, "I was placing a phone call but instead of hitting the '8' I instead hit 'update'"?
I think he means updated accidently because according to Zifna's post, he thought he could roll back. He was wrong though, I guess Zifna jumped the gun on that one, but what can you do? you can't go back to 1.5 now, sorry, I think next time you should read as much as you can before updating and not just trusting one guys word
It looks like he misread the post, so I claim "User Error"
Not development related. Moved.
which one do i have
Perhaps he means he downloaded the wrong PB00IMG? I downloaded the PB00IMG and thought it was the rooted one but I think it is the leaked now??? I installed it as per ivanmmjs walkthrough but it booted up with 2.1 and I dont know how to tell if i am rooted or leaked????? Any help
denonlake said:
Perhaps he means he downloaded the wrong PB00IMG? I downloaded the PB00IMG and thought it was the rooted one but I think it is the leaked now??? I installed it as per ivanmmjs walkthrough but it booted up with 2.1 and I dont know how to tell if i am rooted or leaked????? Any help
Click to expand...
Click to collapse
yea that's wat i mean sorry abot my bad emglish
denonlake said:
Perhaps he means he downloaded the wrong PB00IMG? I downloaded the PB00IMG and thought it was the rooted one but I think it is the leaked now??? I installed it as per ivanmmjs walkthrough but it booted up with 2.1 and I dont know how to tell if i am rooted or leaked????? Any help
Click to expand...
Click to collapse
You have to download the one in my link. PB00IMG.zip is not the name of the ROM, it's the required name for the flash to work.
ivanmmj said:
You have to download the one in my link. PB00IMG.zip is not the name of the ROM, it's the required name for the flash to work.
Click to expand...
Click to collapse
yea but both files have the same name PB00IMG
deseo said:
yea but both files have the same name PB00IMG
Click to expand...
Click to collapse
Yes, but the post/thread/instructions leading to the link would tell you whether you downloaded the leaked version or the rooted version.
If you do not know at this point then it is probably too late since they all have the same file name :\
This is why researching things like flashing a custom ROM to your phone to the fullest extent possible before doing it is always recommended by anyone that frequently posts here.
goodluck
ivanmmj said:
You have to download the one in my link. PB00IMG.zip is not the name of the ROM, it's the required name for the flash to work.
Click to expand...
Click to collapse
wheress the link ?
Grimeartist said:
wheress the link ?
Click to expand...
Click to collapse
In the sticky thread guide in this subforum.
deseo said:
yea but both files have the same name PB00IMG
Click to expand...
Click to collapse
That's what I mean. The file name will ALWAYS be the same since the name tells the hboot that the file is a ROM. What's inside of the PB00IMG.zip is what actually changes. You can't go by filename, unfortunately.
So I am trying to install the Cyanogen Mod using ROM Manager... it downloaded and went to install but stopped and said:
"Failed to verify whole-file signature"
"Signature verification failed"
Anyone know whats wrong?
Aerogauge said:
So I am trying to install the Cyanogen Mod using ROM Manager... it downloaded and went to install but stopped and said:
"Failed to verify whole-file signature"
"Signature verification failed"
Anyone know whats wrong?
Click to expand...
Click to collapse
There is a whole thread titled "do not use rom manager". You can't use it on our phone. I've had it work with nightlies after getting cm7 up and running the normal way. Look in the twice weekly cm7 thread for the latest kang. Oh and search is your friend. Prepare to get flamed
Sent from my SGH-I777 using XDA
I actually tried to install it normally without ROM manager first but it gave me the same error.
Try wiping ur phone again, flash another aokp rom, then wipe and flash cm7. I used shep's miui, it worked flawlessly http://forum.xda-developers.com/showthread.php?t=1314581
burritoguy said:
Try wiping ur phone again, flash another aokp rom, then wipe and flash cm7. I used shep's miui, it worked flawlessly http://forum.xda-developers.com/showthread.php?t=1314581
Click to expand...
Click to collapse
I just tried, I wiped the phone again, then tried to flash MIUI and it gave me 1 of the 2 errors
"E:signature verification failed"
I just read somewhere that my issue can be caused by the Kernel and that you have to flash a custom kernel that doesn't check for the file signature or something? anyone able to point me in the right direction for this?
Aerogauge said:
I just read somewhere that my issue can be caused by the Kernel and that you have to flash a custom kernel that doesn't check for the file signature or something? anyone able to point me in the right direction for this?
Click to expand...
Click to collapse
ever wondered what a sticky was?
Pirateghost said:
ever wondered what a sticky was?
Click to expand...
Click to collapse
ever wonder what a douche was?
Aerogauge said:
ever wonder what a douche was?
Click to expand...
Click to collapse
nah.....i see you sittin there
you see, i know you are really angry at me...in fact uprobablymadbro, but the fact of the matter is....in the amount of time that it took you to write up this topic, wait for the answers to come, and probably still sit there waiting on someone to feed you, you could have read the sticky, and followed all the instructions on how to flash a rom properly on this phone....
but instead, you would rather lash out at people stating the obvious.....so good luck with your dilemma.
Aerogauge said:
Anyone know whats wrong?
Click to expand...
Click to collapse
You don't know how to read.
Miami_Son said:
You don't know how to read.
Click to expand...
Click to collapse
Cool Story BRO!
Miami_Son said:
You don't know how to read.
Click to expand...
Click to collapse
hemadbro
herealmadbro
hewantsomeonetospoonfeedhimanswersbro
Read. Please.
Sent from my AT&T cellular device.
Lol at this whole thread.
Sent from my SGH-I777 using XDA
Excuse me while I wipe the tear out of my eye...
Ok, Im done now. Thread closed.
looking to root my amaze 4g tonight and i was wondering if anyone whos done it before with the all in one kit would like to help me step by step. this is my first time trying to root a phone so itd be easier if i had someone whos actually done it before to help out a little.
much appreciated =]
I could send u a file which u flash n ur phone will be rooted dm me if u want
Sent from my HTC_Amaze_4G using xda premium
It's really easy to do. If I'm not mistaken Hasoon has a video tutorial up to help you step by step on the development section. It's labeled 'Noob Proof'
Sent from my HTC_Amaze_4G
So you make this thread and an hour later you PM me? :sigh:
daniel2115 said:
looking to root my amaze 4g tonight and i was wondering if anyone whos done it before with the all in one kit would like to help me step by step. this is my first time trying to root a phone so itd be easier if i had someone whos actually done it before to help out a little.
much appreciated =]
Click to expand...
Click to collapse
We see you are new here, it is pretty much expected that you spend some time reading the stickies and threads that apply to what it is you are trying to do before making these kind of threads. Add to that this topic has been discussed a lot so there is a tone of info on it. Lastly it is absolutely in your best interest to understand what it is your doing and all that information has been discussed ad nauseum.
hasoon2000 said:
So you make this thread and an hour later you PM me? :sigh:
Click to expand...
Click to collapse
So? I figured I'd try and get some advice from you if it was possible. I read tons of comments between you and other people and you seemed like a nice guy. I wasn't aware it was a big deal
zPacKRat said:
We see you are new here, it is pretty much expected that you spend some time reading the stickies and threads that apply to what it is you are trying to do before making these kind of threads. Add to that this topic has been discussed a lot so there is a tone of info on it. Lastly it is absolutely in your best interest to understand what it is your doing and all that information has been discussed ad nauseum.
Click to expand...
Click to collapse
I've done alot of reading the only thing I'm still unsure about is why theirs no kernels in the all in one kit anymore. In the video he made there's 2 or 3 choices but when I downloaded it the kernel files empty. I don't know if its something about the new update, but I havnt been able to find anything about it.
daniel2115 said:
So? I figured I'd try and get some advice from you if it was possible. I read tons of comments between you and other people and you seemed like a nice guy. I wasn't aware it was a big deal
Click to expand...
Click to collapse
You are missing the point. You made 2 threads withing 2 hours and you PM'd me. Instead, you could've made one thread and placed everything there and wait for a response. Patience is a virtue.
I am a nice guy as you saw in the forums. I do not do technical support via PM. I do help around the forum, just not in my PM.
Since you are new to the forum, I'm just explaining how it works around here so you don't get flamed or anything. Some developers do not like to do tech support via PM, some don't mind. However, majority of them don't. Take that into consideration next time.
hasoon2000 said:
You are missing the point. You made 2 threads withing 2 hours and you PM'd me. Instead, you could've made one thread and placed everything there and wait for a response. Patience is a virtue.
I am a nice guy as you saw in the forums. I do not do technical support via PM. I do help around the forum, just not in my PM.
Since you are new to the forum, I'm just explaining how it works around here so you don't get flamed or anything. Some developers do not like to do tech support via PM, some don't mind. However, majority of them don't. Take that into consideration next time.
Click to expand...
Click to collapse
Yeah I get where your coming from, I'm sure you get tons of pms about the same stuff over and over. So sorry about that. I don't mean to fill up the forum with post that have already been covered too. Your tool, from what I've read, seems like the safest easiest way to root the amaze. It's my first time ever doing this sort of thing so I just want to be sure I don't mess anything up. Could you answer my question about no kernels being in your kit anymore? Do I just need to download one and put it in the file or what? And if so is there anything else That was taken out and needs to be downloaded that I might've missed?
Thanks.
I think I finally have all the steps down.
1) download winrar
2) download tool and extract data folder to my desktop or wherever
3) turn USB debugging on phone
4) download the rom I want and put it into the kernel section of the data folder.
5) plug in phone
6) follow steps 1-5
7) put unlock_code.bin in the data folder
8) flash recover (should I use the 4ext, TWRP 2.1.0, or find another one online?)
9) flash kernel/rom I picked
10) boot into recovery
11) boot into boot loader
12) relock boot loader (how do I get into fast boot to do this?)
Please let me know if I'm missing ANYTHING in those steps. If I'm not mistaken I should be finished after completing all these?
Thanks again for all the help guys! im just a noob that needs some help. Haha
daniel2115 said:
I think I finally have all the steps down.
1) download winrar
2) download tool and extract data folder to my desktop or wherever
3) turn USB debugging on phone
4) download the rom I want and put it into the kernel section of the data folder.
5) plug in phone
6) follow steps 1-5
7) put unlock_code.bin in the data folder
8) flash recover (should I use the 4ext, TWRP 2.1.0, or find another one online?)
9) flash kernel/rom I picked
10) boot into recovery
11) boot into boot loader
12) relock boot loader (how do I get into fast boot to do this?)
Please let me know if I'm missing ANYTHING in those steps. If I'm not mistaken I should be finished after completing all these?
Thanks again for all the help guys! im just a noob that needs some help. Haha
Click to expand...
Click to collapse
All the steps are correct, except for 10-12. You do not need to relock the bootloader. It will only cause more problems.
ALSO, flash the ROM first, then flash the kernel.
Keylogger_0 said:
All the steps are correct, except for 10-12. You do not need to relock the bootloader. It will only cause more problems.
ALSO, flash the ROM first, then flash the kernel.
Click to expand...
Click to collapse
So what should I do after flashing the rom?
Also, dont most of the roms already have kernels in them so I won't have to flash both but just the rom?
Thanks a lot!
daniel2115 said:
So what should I do after flashing the rom?
Also, dont most of the roms already have kernels in them so I won't have to flash both but just the rom?
Thanks a lot!
Click to expand...
Click to collapse
If you want to use a custom kernel, then you can. If not, just flash the Custom ROM and you will be fine.
hasoon2000 said:
If you want to use a custom kernel, then you can. If not, just flash the Custom ROM and you will be fine.
Click to expand...
Click to collapse
Okay that's what I was wondering. So after finishing flashing the ROM I just unplug my phone and that's it?
daniel2115 said:
Okay that's what I was wondering. So after finishing flashing the ROM I just unplug my phone and that's it?
Click to expand...
Click to collapse
Pretty much. Just restart the phone and then you are good to go.
hasoon2000 said:
Pretty much. Just restart the phone and then you are good to go.
Click to expand...
Click to collapse
Okay thanks I'm going to try it out soon. I'll let you know how it goes.
Oh I almost forgot my last question, which recovery would you suggest using? The 4ext, TWRP 2.1.0, or is there a better one I should download?
daniel2115 said:
Oh I almost forgot my last question, which recovery would you suggest using? The 4ext, TWRP 2.1.0, or is there a better one I should download?
Click to expand...
Click to collapse
4EXT
Hey I'm about to try it out now, do I need to uncheck fast boot? And should I recheck it after if I do
I made a video. Follow it.
hasoon2000 said:
I made a video. Follow ]
Click to expand...
Click to collapse
awesome video! You just made me so much more confident about doing it lol. So the only difference im guessing is since you didn't flash a kernel I just flash that after the recovery and finish the process. You honestly have no clue how big of a help you've been!
hello all i just got this phone from a friend and its from china however i can use it here in the states,im just having a small problem getting the american android market stuff on this phone,a guy at bestbuy said i could force it and than said to come to this site.its the best phone i ever had and am really wanting to work it to its full potential so please help me out all and thanks.
Start by reading up in de General, Q&A, Dev ....... sections
Then if you don't understand something -----> Use Search........
By then,after reading a bit, you will know that you need to give more info when asking questions.
Greets
martinusbe said:
Start by reading up in de General, Q&A, Dev ....... sections
Then if you don't understand something -----> Use Search........
By then,after reading a bit, you will know that you need to give more info when asking questions.
Greets
Click to expand...
Click to collapse
well thanks for being nice on that ok here is everything i know
andriod version 4.0.4
build number 4.1.B.0.587
kernel version [email protected]#1
baseband version 8x55A-AAABQQAZM-203028G-77
Still you have the problem ??
E Rulz said:
Still you have the problem ??
Click to expand...
Click to collapse
yes i do,i was wondering if anyone would reply without being rude
scalpachette said:
yes i do,i was wondering if anyone would reply without being rude
Click to expand...
Click to collapse
He wasn't rude, he was just trying to tell that you didn't give as much info as it was needed.
About your problem, download flashtool and download .ftf (I suggest Nordic region) and flash it. Everything can be found in dev sections, or in sticky thread in general section.
Madfysh said:
He wasn't rude, he was just trying to tell that you didn't give as much info as it was needed.
About your problem, download flashtool and download .ftf (I suggest Nordic region) and flash it. Everything can be found in dev sections, or in sticky thread in general section.
Click to expand...
Click to collapse
yea this stuff makes no sense to me at all.i wish i could just zip through this like yall but oh well
scalpachette said:
yea this stuff makes no sense to me at all.i wish i could just zip through this like yall but oh well
Click to expand...
Click to collapse
Fair enough
But don't worry, nobody was born knowing all. Take your time and read a bit. If you are interested in that you will learn fast, as its not hard.
There is even tutorial on how to use flashtool.
See..try..
if u just want to download american android market apps. u can try market enabler.
sagar.bendale said:
if u just want to download american android market apps. u can try market enabler.
Click to expand...
Click to collapse
i tried that before but it said my phone needs to be rooted,that i tried but failed horribly
So? You managed to flash it?
Madfysh said:
So? You managed to flash it?
Click to expand...
Click to collapse
i managed nothing but to prove i shouldnt be doing this stuff haha nah i can try with enough more information i can try to pull it off see i tried to flash something or another but it just didnt happen i messed up the phone really bad and here i am still unable to do what i was trying to.seems as if something doesnt want me to do this.i wish i could
Flash it with correct firmware, get the fw's from sticky thread in general section.
btw. edit thread title to reflect your problem, as current one is so generic that it can be used on 90% threads here
Madfysh said:
Flash it with correct firmware, get the fw's from sticky thread in general section.
btw. edit thread title to reflect your problem, as current one is so generic that it can be used on 90% threads here
Click to expand...
Click to collapse
well im not doing so well again the same thing happened,i need help but just cant get it right.i tried another time but need to do an update to fix the phone.if anyone wants to try to walk me through this you can find me on skype i think my profile has the info on it.if not pm me or just not.thanks for the advice and attempts at it.
What is the filename of the file you are flashing to your phone?
Did flashtool reported any error or everything went well with flashing?
---------- Post added at 09:00 AM ---------- Previous post was at 08:41 AM ----------
Why are you sending PM's, we have forum, there are smarter people here and will solve your problem faster if more of us discuss about it.
First you said that you have problems with keyboard, then you said you followed this instructions: http://theunlockr.com/2012/10/08/how-to-root-the-sony-ericsson-xperia-neo-mt15i/
On those instructions I only see how to root your phone, which includes flashing MT11i kernel.
Now hear this. If you said all this info before, you would get your solution by now.
Flashing MT11i kernel on MT15i gives that error. And I would have told you that if you gave all the info you have. And no need to go around the web for instructions, everything you need is here, if you had checked this (sticky) thread: http://forum.xda-developers.com/showthread.php?t=1678690 you would noticed that flashing only kernel cause errors.
For start flash your phone with correct fw, to solve your initial question, then go on next exhibitions
And please use forum, it will be faster
nah sorry for all the issues and problems im done forget this thread please and delete my account im not doing this.time for a new phone.peace
scalpachette said:
nah sorry for all the issues and problems im done forget this thread please and delete my account im not doing this.time for a new phone.peace
Click to expand...
Click to collapse
It's easy stuff mate. http://forum.xda-developers.com/showthread.php?t=1973017
Hello! Like it says in the title I have a problem with rooting. All I did was to upgrade to official jelly bean. I searched for like 3 days continuously in French, German, English and all I have found was some info about what I should do. So I know that I have to flash a new CWM and that's probably why I can't flash ROMs. I get into Recovery mode, I select "apply update from external storage" and then it says with red : "E:failed to mount /sdcard (No such file or directory)". I found another method, with adb, tried it and failed, it says can't read file or open it, I'm not sure. With odin I tried so much CWMs... I can't number them. None of them worked. So I'm asking you, I'm mad to upgrade my android, to flash cyanogenmod, and I can't. Please help!! And please tell me how I know what version of cwm I need? I mean it's from Baseband- I9100PXXLS8 or Build number-I9100PXXLSQ? Please help! And don't tell me to search please!
How do you not know about philz kernel. Link below... Pls read it and flash what is for you're model and not the i9100.
http://forum.xda-developers.com/showthread.php?t=1877270
peter98is said:
Come on!! I need your help guys, please, it's not like I made my account just to be done. Don't make me feel like I wasted my time
Click to expand...
Click to collapse
Is that why your spamming your problem in 3 posts.You may find that people here dont like impatient spammers round here.
RULE 5. Create a thread or post a message only once.
Your duplicate posts have been deleted.
ApriliaM3 said:
RULE 5. Create a thread or post a message only once.
Your duplicate posts have been deleted.
Click to expand...
Click to collapse
I'm sorry I didn't know I did this thread duplicated. Maybe I pushed post thread button two times. I'm sorry. About philz kernel I know it, I said I tried so many versions... none of them worked. So tell me how can I know the correct version? What I mean by that is I saw at philz kernel a code like xwlsp or xxlsj. How can I know the code for my phone? Thank you
Settings > about the phone > base band version
Inviato dal mio GT-I9100 utilizzando Tapatalk
Thanks I'll try to flash it when I come back to school. My baseband is I9100PXXLS8. I saw some cwms with xwls8. Is there a problem? There says is nothing if is xx or xw it doesn't matter. Is that so?
Baseband is irrelevant because it's the modem. You need the build number, which is the kernel.
theunderling said:
Is that why your spamming your problem in 3 posts.You may find that people here dont like impatient spammers round here.
Click to expand...
Click to collapse
Ok so my build number is JZO54K.I9100PXXLSQ. What cwm should I flash? With what code? Sorry I'm putting those noob questions
Look Peter, do what I did and read up on stuff for a week before you flash anything.Do you realise all the things that can go wrong with the phone.
It will be you that has a phone that doesnt work and how will that affect you?.
theunderling said:
Look Peter, do what I did and read up on stuff for a week before you flash anything.Do you realise all the things that can go wrong with the phone.
It will be you that has a phone that doesnt work and how will that affect you?.
Click to expand...
Click to collapse
Hello. Last night I installed cwm for my phone. IT WORKED!! FINALLY!! Then I flashed the 10.1.3 RC2 CyanogenMod stable ROM and I was a bit scared because the android keyboard was failing continuously and I didn't know why. And then I remembered I flashed the 4.3 gapps. So I downloaded the gapps for 4.2.2 and now all works fine. No problem. SO HAPPY I FINALLY GOT A NEW ROM!! thank you to all guys that helped me. You could kick me out from the beginning but you were good with me i'm new here and i really apreciate that. Thank you!!
NOW look at efs/nand backups...
theunderling said:
NOW look at efs/nand backups...
Click to expand...
Click to collapse
Thats how it looks now. Really proud about it. Ok but what does those backups do? I mean just do like a normal backupor is something more?
4.2.2? Why not 4.4.2 . It's much better
Bk up efs with ktool from playstore
Nandroid bk up. Make that in cwm recovery. These are a must for you to do tonight. :thumbup:
BTW its free to get ktool so don't skip backing up you're efs. Also take a COPY of that folder and put it on you're PC. Copy... Don't remove it or delete that folder.