Honor 5x kiw-L24
trying to flash cm13 nightly from 8/13 to my phone using the newest twrp (twrp-3.0.2-0-kiwi.img). I keep getting this error on the install....
comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3.0.C3-00022
assert failed: kiwi.verify.trustzone("TZ.BF.3.0.C3-00025")==1
Updater ended with error:7
error installing zip file 'sdcard/dloads/cm-13.0-20160813-NIGHTLY-kiwi.zip
(i have a photo of the logs but xda won't allow me to put it on this post since i don't have 10 posts)
thanks for any info
You need to revert to stock and run Huawei's Marshmallow update. This makes some important changes that enable the fingerprint sensor to function.
See this thread for details on how to do that.
You are flashing wrong version of CM on wrong version of the current software of your phone.
To bypass this, delete line starting from assert(usually the topmost line) from the updater-script of the CM 13 zip file, you can find it here:
Code:
[b]META-INF/com/google/android/updater-script[/b]
Hope this helps you.
DigiGoon said:
You are flashing wrong version of CM on wrong version of the current software of your phone.
To bypass this, delete line starting from assert(usually the topmost line) from the updater-script of the CM 13 zip file, you can find it here:
Hope this helps you.
Click to expand...
Click to collapse
I fixed error 7 but after fixing and flashing I get bpotloop
Then maybe a wrong combination of ROM and device, or a buggy/incomplete ROM. But if you want to get back to stock ROM, just follow below steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps.
KIW-21L
It works on my KIW-L21 too. Same problem, I have no seen that I need MM, only CM 12 works CM 13 installation always fail. Original Firmware MM 6.1 on SDcard1/load then "Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously"
and it works without fastboot.
Im so happy, THANKS!!!! :good::good::good::good:
robert_web said:
It works on my KIW-L21 too. Same problem, I have no seen that I need MM, only CM 12 works CM 13 installation always fail. Original Firmware MM 6.1 on SDcard1/load then "Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously"
and it works without fastboot.
Im so happy, THANKS!!!! :good::good::good::good:
Click to expand...
Click to collapse
Awesome!!
Good to hear it..
it's wooooooork thaaank you very very very much ooooh
on kiw-l21c185b140
alhuraibi said:
it's wooooooork thaaank you very very very much ooooh
on kiw-l21c185b140
Click to expand...
Click to collapse
Give a thanks (thanks button) for the person who helped you
PalakMi said:
Give a thanks (thanks button) for the person who helped you
Click to expand...
Click to collapse
I already did, :good: , thanks to you also for mention
alhuraibi said:
I already did, :good: , thanks to you also for mention
Click to expand...
Click to collapse
No need to :good:
This what worked for me.
Pre: place the update.app in SDCARD\dload folder . Update file from Huawei website filename Honor 5X_Firmware_KIW-L24_Android 6.0.1_EMUI 4.0_C567D003_United States.zip)
1. TWRP recovery mode restore from 2016-07-10--16-37-28_KIW-L24C567B331_Stock_Plus_Stock_Recovery.7z( you have to unzip the folder and place the folder under backup/ID#/
2. Now reboto teh mode in update mode. ( POWER+UP+ DOWN) key . You will see EMUI updating..
3. Reboot the phone check . Check Android version 6.1 and EMUI 4.0
4. reboot the phone in bootloader mode. ( using adb/fastboot) connect UBS cable to your PC
5. Flash TWRP recovery mode again using fashboot flash recovery TWRP.IMG
6. Reboot the phone in TWRP recovery mode ( POWER+ UP) key
7. Install CM14.1 or any ROM equal to or higher than Marshmallow ( no more assert failed: kiwi.verify.trustzone )
8. install GAPPS
You done
I'm trying to do the same thing (CM13 cm-13.0-20161222-SNAPSHOT-ZNH5YAO3Z3-kiwi) , but keep getting error 7. Extracted recovery.img etc', flashed stock version (2016-04-07_KIW-L24C567B151_Stock_Plus_Stock_Recovery), no use. Error 7 persists. Any ideas?
DB___ said:
I'm trying to do the same thing (CM13 cm-13.0-20161222-SNAPSHOT-ZNH5YAO3Z3-kiwi) , but keep getting error 7. Extracted recovery.img etc', flashed stock version (2016-04-07_KIW-L24C567B151_Stock_Plus_Stock_Recovery), no use. Error 7 persists. Any ideas?
Click to expand...
Click to collapse
Also fails with cm-14.1-20161220-UNOFFICIAL-kiwi
Update:
Using Honor 5X_Firmware_KIW-L24_Android 6.0.1_EMUI 4.0_C567D003_United States in dload and then
2016-07-10--16-37-28_KIW-L24C567B331_Stock_Plus_Stock_Recovery.7z changed the error type to "can't install this package on top of incompatible data", a format after that solved the problem.
jmons said:
Honor 5x kiw-L24
trying to flash cm13 nightly from 8/13 to my phone using the newest twrp (twrp-3.0.2-0-kiwi.img). I keep getting this error on the install....
comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3.0.C3-00022
assert failed: kiwi.verify.trustzone("TZ.BF.3.0.C3-00025")==1
Updater ended with error:7
error installing zip file 'sdcard/dloads/cm-13.0-20160813-NIGHTLY-kiwi.zip
(i have a photo of the logs but xda won't allow me to put it on this post since i don't have 10 posts)
thanks for any info
Click to expand...
Click to collapse
I also faced this issue but i solved it, i change my TWRP (custom recovery) and everything is right now. I am now able to flash any rom.
Related
Hi,
Today i received a notification on my L22 to update to Marshmallow (310).
But when it reboots into recovery (stock), it says system update failed.
Note:
I have rooted my phone and installed custom rom before. But i used to get back to stock (both rom and recovery) with a TWRP restore. This has worked with all the previous updates of Lollipop (e.g. 130 to 150), but its not working with Marshmallow.
Can someone please help!!.
Can someone please help. I hope this is a beta version. Actually I had opted for the beta previously.
there are no restoration files zips for MM yet, alternatively, you can flash TWRP back via adb and restore your back up. else, follow the steps in thread below....good luck!
http://forum.xda-developers.com/honor-5x/help/bricked-honor-5x-t3328308
Thank you @nandakalyan @Arobase40 for the information.
I can check with them. But when i tried to login to their community, for some reason, my login credentials weren't recognized.
As an update, I tried the following
I downloaded the lollipop 150 firmware and flashed the BOOT, RECOVERY, SYSTEM and CUST image files. But I received REMOTE: COMMAND NOT ALLOWED error while flashing CUST. I even tried installing the USB/ADB drivers again. Still no luck.
Then i tried the update. Still the same error.
Again i followed step 1, then relocked the bootloader (successfully). But still got the same error. (Because i read somewhere that it could be due to modified firmware)
Looks like some issue with the package. So i might have to get back to them.
I will post the update once i get the update from them. Thank you very much guys.
Arobase40 said:
The CUST image file can't be flashed !
But I saw someone was able to rebuild the /Cust folder and its content but I'm too lazy to do the search...
It's in the Honor 5x thread.
Click to expand...
Click to collapse
That is correct, cust.img can't be flashed through ADB, I have had this issue too.
@mani0608
The only best way is to flash stock recovery, create a dload folder in the root of the sd-card, place the update.app (original firmware file) in it, boot into download mode (power + vol up + vol down) and let the whole factory image be flashed.
nandakalyan said:
That is correct, cust.img can't be flashed through ADB, I have had this issue too.
@mani0608
The only best way is to flash stock recovery, create a dload folder in the root of the sd-card, place the update.app (original firmware file) in it, boot into download mode (power + vol up + vol down) and let the whole factory image be flashed.
Click to expand...
Click to collapse
I followed this and then tried the OTA and voila it worked!!
mani0608 said:
I followed this and then tried the OTA and voila it worked!!
Click to expand...
Click to collapse
Super....congrats! Glad it worked
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
@DigiGoon here's a person needing your help
I have a couple questions for you:
1) Before flashing CM13, what stock firmware version were you on? (e.g. b130, b140, b151, b331)
2) Before flashing CM13, did you take a NANDROID backup of your stock setup? Most guides have this step.
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
fistfullofbeer said:
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
There is also a full, latest twrp, recovery backup o.o for b331
You restore everything except data, erecovery, and recovery... 1.6 gig download o.o does the job in one fell swoop as long as you have latest twrp.
Just did this the other day...
fistfullofbeer said:
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
Click to expand...
Click to collapse
Happy to help buddy.
DigiGoon said:
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
Click to expand...
Click to collapse
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Yes it does replace, and you simply need to reflash TWRP again
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Instead of flashing full update.app , i can help u just to stop doing a lot of work after flash
DigiGoon said:
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
Click to expand...
Click to collapse
So which is the three button method and which is the other?
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
Three button method is nothing but by placing update.app in /sdcard/dload/
And then put off the phone followed by pressing vol down+vol up+ power button . This will let it install full stock rom and phone looks brand new in terms of software
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
DigiGoon said:
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
Click to expand...
Click to collapse
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
gabepaul said:
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
Click to expand...
Click to collapse
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
gopinaidu77 said:
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
Click to expand...
Click to collapse
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
gabepaul said:
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
Click to expand...
Click to collapse
Extract UPDATE.APP via Huawei Update Extractor tool, pull out relevant img files (system.img, boot.img, recovery.img, recovery2.img(if not in your device), cust.img) flash this one by one via fastboot by booting your device in fastboot mode, fire the given below commands.
Code:
fastboot flash <img name w/o extension> <full path to the relevant img file>
After this try the three button method, if it doesn't work then boot into eRecovery then tap "Download Latest Firmware". It will connect to Wi-Fi and will start downloading the latest firmware of your device. After the process gets completed you'll be on stock ROM with your bootloader in "Locked" state.
You are guiding wrong bro . There is a need of extension too. Else it will give error saying file not found
CUST issue
Hi,
I tried to do the same, Boot.img, system.img and recovery.img are flashed successfully but I cannot flash CUST.img, following error occurs, please help.
it says: while writing 'cust'...,
error: FAILED (remote: command not allowed)
Please help, thanks in advance.
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Fran Montero said:
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Click to expand...
Click to collapse
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Ruben Craveiro said:
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Click to expand...
Click to collapse
Have you installed it already?
Many thanks!
Fran Montero said:
Have you installed it already?
Many thanks!
Click to expand...
Click to collapse
Im using latest twrp with updated preloader and LOS13
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Maybe you have a sd card formatted as internal storage?
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
1. load scatter.txt in earlier post.
2. select preloader, lk and boot imgs, location of these from the stock 20160810 ROM.
3. select recovery, location of TWRP img.
4. unselect everything else.
Click to expand...
Click to collapse
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
If your device already rooted, you can also install flashyfi and flash the .img file.
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
a bit late (did came to it to test your solution earlier) but it worked indeed. perfect, very much appreciated.
Can u upload 20171201 again?! Link is not working... Thx
opss said:
Can u upload 20171201 again?! Link is not working... Thx
Click to expand...
Click to collapse
You'll find a link here: https://forum.xda-developers.com/el...t/rom-stock-rom-android-6-0-12-01-17-t3542463
Thx dude
jotei66 said:
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
Click to expand...
Click to collapse
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
Click to expand...
Click to collapse
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
Click to expand...
Click to collapse
Have you tried pressing power and then keep finger pressed on vol up to go straight to TWRP recovery and then flashing a new ROM in TWRP ?
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
thecrazyfarang said:
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
Click to expand...
Click to collapse
No worries, just glad you got it sorted out.
Btw (although I know you dont really wanna risk trying it) my son uses my P9000 and has TWRP installed with no issues at all and root with Magisk.
But great yous sorted out
Root twrp Step by step for newbeee-
Ok,so I've installed TWRP 3.0.2-8 and when I start the phone it goes into the recovery... what to do next? Can I find a tutorial somewhere how to do this? And wich image can I use or is the best for the moment?
thx for helping...
So i got my Honor 5x yesterday and thought i would install a custom rom on it since people are recommending it.
Its my first time so i followed guids. I installed adb and fastboot and managed to get TWRP 3.1.1-0- on it.
Btw, i have a Honor 5x
Model KIW-L21
I am able to get into the recovery TWRP. I made a backup and saved the folder "BACKUPS" on my PC.
I then downloaded LineageOS from their Homepage: download (DOT) lineageos (DOT) org/kiwi
I downloaded the latest version. I also downloaded Gapps from Opengapps.org. I downloaded ARM64 version 7.1
I wiped my phone completely and copied the two zip files on the phone. I went to "install", selected LineageOS zip and added Gapps. i swiped right to install and the installation stopped with ERROR 7
I tried to download older versions of LineageOS but the same thing happens. ERROR 7
I then downloaded an olderversion of CM13 with GAPPS 6.0. Again, Error 7
I downloaded XENON HD ZIP from here: mirrors (DOT) c0urier (DOT) net/android/teamhorizon/N/Official/kiwi/
Error 7
I downloaded ASOP from here: downloads (DOT) aospextended (DOT) com/kiwi/
Error 7
I looked up Error 7 and its says it is a security check that figures out, that the ROM is not compatible with the Phone. Some guy told me that this happens a lot and that i should use another rom.
I looked for a solution on youtube and found a guy who said that i can do the following:
Unzip the ROM on your pc, go into \META-INF\com\google\android and open the updater script with Notepad++. Delete the first two lines that says asserts, save, close it again and zip the whole package again.
I copied the new, modifiled rom on the phone with the GAPPS and installed it. This time ERROR 7 didnt appear. GAPPS were also installed. When i boot my device i get in the loading screen from Lineage for about 5-10 minutes. After that, it just restarts and restarts and restarts. I can't get out of the boot loop since I can't remove my battery. when I press VOL UP I come back the TWRP and can wipe the phone again.
I tried that with 3 different LineageOS ROMS and one XENON HD ROM.
I also get into a boot loop where my phone just restarts and restarts and restarts.
I tried to get my backup working so I copied the folder "BACKUPS" on my phone and went to restore in TWRP. but... i found nothing there?
I am super frustrated since my phone is basically dead and I have no idea what I can do.
BTW, every site calls my phone "KIWI" but my model number is "KIW-L21"
As mentioned in Los 14.1 thread (& should be mentioned in all threads), "ROM Firmware Required: No VoLTE firmware! (B360, B370, ...)". You must downgrade your stock rom to B350 at least, before try playing with custom roms (only for kiwi, of course).
Non VoLTE Marshmallow firmware is required. As said by @mauam get in there and have the same process repeated
Thank you for your replies.
The only thing i could find was this thread: https://forum.xda-developers.com/ho...-lineageos-14-1-pre-official-kiw-l24-t3528488
It said there:
Important note:
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
It doesnt mentioned what that mean and even said "dont ask in here how to downgrade"
I have no idea what all that means. I dont know what stock firmware is, what version i have or how i could downgrade it. I can access TWRP, but still have no OS on it.
edit: this is the full log:
Updateing partition details...
... done
Full SElinux support is present.
MTP Enabled
Installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3.0.C3-00022") =="1"
assert failed: kiwi.verify_trustzone("TZ.BF.3.0.C3-00025") == "1"
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Updating parition details...
...done
Click to expand...
Click to collapse
When i edit the zip file and delete the first two line of the updater scripter with notepad++ as i mentioned above, i can install these ROMS, but they wont boot / are in an infinite Bootloop
So on which firmware you were before flashing Los
PalakMi said:
So on which firmware you were before flashing Los
Click to expand...
Click to collapse
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Activehannes said:
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Click to expand...
Click to collapse
Just go to about phone
PalakMi said:
Just go to about phone
Click to expand...
Click to collapse
I did and posted a screenshot above
is it Build number "KIW-L21C432B160"
so... B160?
update:
I just downloaded this:
NEW KIW-L21 C432B350 - D003
from this thread: https://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
I was going to unzip it, copy the "dload" folder on my device, go the the updater and run the "local update package".
And then my phone will be on android 6.0 with b350, right?
The next step would be to start the phone in the recovery TWRP, go to wipe --> advance wipe and select everything (system, data, cache etc). after that i copy the latest Kiwi lineage OS zip rom on my device with the GAPPS 7.1 and try to install them again via TWRP 3.1.1?
Is this right?
I just wanna ask because my phone doesnt work for 2 days now and i dont want to brick it completely. cant afford a new one
Update to marshmallow first (any update before b360, like b320)
Update to marshmallow first (any update before b360, like b320)
Click to expand...
Click to collapse
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Try manual ota here or search here. If no luck use XDA search bar &/or Google. Good luck.
Activehannes said:
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Click to expand...
Click to collapse
Try any marshmallow update before b360.
If it didn't work, try the above post.
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
PS C:\adb> adb devices
List of devices attached
W6HDU17610003396 device
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot oem relock 1524319619165116
...
FAILED (remote: Image verify failed,relock fail)
finished. total time: 1.810s
PS C:\adb> adb devices
List of devices attached
PS C:\adb>
Click to expand...
Click to collapse
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Activehannes said:
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Click to expand...
Click to collapse
May be i can help u with this .
Hi,(I am spanish sorry about my english)
after a long time searching how to rollback finally I have found the way thanking to this thread https://forum.xda-developers.com/p10/how-to/success-downgrade-oreo-to-nougat-t3729659.
In the thread the way to rollback isn't very extended explained so i decided to create mine and explain easy.
My phone is a Huawei P10 L29c432B.... .
Steps:
1- Download HWOTA8 from--https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
2-Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
3-Delete the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Hi!
Thx for this guid, it seems to be clearly and good to understand! I have only one problem: i can not find the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8 for changing... ???
I tried with notepad++, but i can not do this... How did you get this step working?
Thx a lot!
stefan.irmen said:
Hi!
Thx for this guid, it seems to be clearly and good to understand! I have only one problem: i can not find the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8 for changing...
I tried with notepad++, but i can not do this... How did you get this step working?
Thx a lot!
Click to expand...
Click to collapse
You have to unzip the hwota8_update.zip file into another location, edit the extracted update_binary file and then repack the zip. The update_binary file in HWOTA8_<date>.zip is a binary file and shouldn't be edited with a text editor.
txonan said:
Hi,(I am spanish sorry about my english)
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Click to expand...
Click to collapse
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
pale1505 said:
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
Click to expand...
Click to collapse
First few times i had the same problem...
When the phone is off an you will hold "Power" and "Volume+" button to boot into TWRP, just hold "Volume+" after phone is vibrating... Then you will boot into TWRP...
stefan.irmen said:
First few times i had the same problem...
When the phone is off an you will hold "Power" and "Volume+" button to boot into TWRP, just hold "Volume+" after phone is vibrating... Then you will boot into TWRP...
Click to expand...
Click to collapse
You have to reinstall twrp and then continue with the steps.
pale1505 said:
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
Click to expand...
Click to collapse
The fact is that the recovery proccess is a **** in this model. Try to power completely off the phone and the Pess POWER + VOL+ when you feel the phone vibrates retire the press of power button and still pressing VOL+ button by this way sometime it goes ok. If TWRP load go ahead with the followings steps.
Other way it to reinstall again TWRP untill it loads.
Let me know if you suceed, good luck.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
2. Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
non-functional link?
How exactly is it to be?
txonan said:
The fact is that the recovery proccess is a **** in this model. Try to power completely off the phone and the Pess POWER + VOL+ when you feel the phone vibrates retire the press of power button and still pressing VOL+ button by this way sometime it goes ok. If TWRP load go ahead with the followings steps.
Other way it to reinstall again TWRP untill it loads.
Let me know if you suceed, good luck.
Click to expand...
Click to collapse
just to let you know that nothing worked,
went to a shop, they tried everything, uploaded older firmwares, but after that the phone died, only black screen, couldn't even switch it on.
warranty did the trick
the guys replaced the mainboard, nothing else helped
so i'm waiting now for the official update
Good day! Can I use this method for installing Official Oreo from Beta? What I would like to do, is skip the deleting of row then just flash the twrp and continue with installation process.
I'm on VTR-L29C636B361.
I would like to rollback to Nougat, for root reasons. I'm trying to follow this method, but I'm not able to find the right files. All I succeded to find is the "update.zip", from Firmware Finder website, but no signs regarding others mentioned ("update_all_hw.zip"). Where can I dowload the right files?
Moreover: I flashed TWRP 3.2.1. I would like to go back on stock recovery, but again I'm facing a lot of problems. I would like to extract from update.app I have (from "update.zip" above mentioned), but HuaweiUpdateExtractor gives me a lot of error. Any help?
Thanks!
pdbc said:
I'm on VTR-L29C636B361.
I would like to rollback to Nougat, for root reasons. I'm trying to follow this method, but I'm not able to find the right files. All I succeded to find is the "update.zip", from Firmware Finder website, but no signs regarding others mentioned ("update_all_hw.zip"). Where can I dowload the right files?
Moreover: I flashed TWRP 3.2.1. I would like to go back on stock recovery, but again I'm facing a lot of problems. I would like to extract from update.app I have (from "update.zip" above mentioned), but HuaweiUpdateExtractor gives me a lot of error. Any help?
Thanks!
Click to expand...
Click to collapse
At the HWFF website the link leads you to you need to click the "filelist" (not only the "update"), that will give you links to all the files needed.
For the rest I am not sure, would also like to get back to the stock recovery but so far found no way to do so...
_Nostromo_ said:
At the HWFF website the link leads you to you need to click the "filelist" (not only the "update"), that will give you links to all the files needed.
For the rest I am not sure, would also like to get back to the stock recovery but so far found no way to do so...
Click to expand...
Click to collapse
I can give you recovery.img and recovery2.img for VTR-L29C636B162. I flashed this and then roll back to Nougat (B172) with FF.
pdbc said:
I can give you recovery.img and recovery2.img for VTR-L29C636B162. I flashed this and then roll back to Nougat (B172) with FF.
Click to expand...
Click to collapse
Thanks a lot for your offer, however unfortunately my model is VTR-L09 so I better do not mess it even more...
how do i edit update-binary? Just odd things comes up with notepad++
Question
txonan said:
Hi,(I am spanish sorry about my english)
after a long time searching how to rollback finally I have found the way thanking to this thread https://forum.xda-developers.com/p10/how-to/success-downgrade-oreo-to-nougat-t3729659.
In the thread the way to rollback isn't very extended explained so i decided to create mine and explain easy.
My phone is a Huawei P10 L29c432B.... .
Steps:
1- Download HWOTA8 from--https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
2-Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
3-Delete the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Click to expand...
Click to collapse
Hi, I have one question
Your phone was VTR-L29 C432 and you used the firmware of VTR-L29 C900, so can I use the C900 in any version to rollback and after that, what would be my version? C432 or C900?
I'm asking because for some reason I have VTR-L09 8.0.0.046(04VT) and I want to rollback, then rebrand and finally upgrade to VTR-L29 C432 with a custom kernel.
Thanks a lot!
This guide realy work ??
hello, I test by cons I have a problem, once flash hwota8_update.zip, it tries to restart in recovery and redémre on oreo, a solution?
Hello, I have a problem in the rocovery that I flash wota8_update.zip I have E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip file '/external_sd/HWOTA8/update.zip
Maybe this is a silly question. Do we need to change the recovery file since MHA is a code name for MATE 9. P10 use VTR. Is it still usable?