I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
Here I sit with a dell venue 8 3840 bricked, when I boot it shows the USB sign with thick bar under it. Now I tried the unbricking method found from Dell Table Flash Notes and I was able to do it all the way up to the part where you double click on the P802_flash_device_wifi_only.bat and it was unable to find the device, so I tried it again, and this time I could even use the xFSTK Downloader program it now started giving me that error windriver error 0x20000015 which it didn't used too, so now I don't know what to do.
venue 8 3480
so you know this doc right?
opensource.dell.com/releases/Venue_8_3840_Merrifield/developer-edition/Doc/OSS_A195.pdf
it looks to me that you are at page 11 step 6 and forgot to flash "droidboot.img"
6) Go to the directory contains “boot.img” and run these commands.
\> fastboot flash boot boot.img
\> fastboot flash fastboot droidboot.img
\> fastboot reboot
you can get those files from
opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/A195/Unbrick/
I had the same problem and got away with it
hope this helps
Trying to unbrick according to opensource.dell.com/releases/Venue_8_3840_Merrifield/developer-edition/Doc/OSS_A195.pdf
Firmware flash is done, xFSTK shows success as at the manual picture A10.
But then the device do not switch to the fastboot mode, just keeps showing black screen. Three minutes later shows the intel logo and then the empty battery sign, at this time it dissappears from the computer device manager (was shown as Merrified), then the device loops showing the the empty battery sign.
Any advice?
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
i have same problem.
can someone solved it?
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
mirul_up said:
i have same problem.
can someone solved it?
Click to expand...
Click to collapse
pseudosane said:
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
Click to expand...
Click to collapse
Go through this thread http://forum.xda-developers.com/showthread.php?t=2292828 it will definitely solve your problem, from the screen-shot it seems that you are using windows 10, i'm not sure that omap4430 drivers will work on windows 10 or not, but you'll try otherwise do the process on windows 7, your phone will revive...
@Codeplex its to complicated thread.
before mine become like this my phone alway succes writing recovery via adb fastboot but now i try writing recovery via adb fastboot always filed.
flashing firmware with cmahendra method always get 15% error..
I think all dev not care anymore about our phone..,
HI i have just bought Honor 7 european version PLK-L01 , i have rooted this phone with twrp recovery. and in twrp recovery which is in chines languge i have deleted OS and also some of TWRP files. no back has been made.
now i have just four options in my phone
without conected to pc.
1. direct in twrp recovery mode (vol up+ power button) and if i install my os through zip file. it shows MD5 not found.
2. i can see both internal and SD card storage. internal storage is 10.3gb. and have TWRP folder with TWRP.img. nothing more.
with usb cabel conected to pc.
1. both vol button + power button wil bring Huawei e-Recovery mode. there i can conect to my w-lan but msg will come getting package info faild
2. vol button down + power button will bring fastboot&rescue mode ( that i can conect with pc and should open Hisuite)
but nothing will happen.
or with out any Button apear just Honor logo.
can you please help me out to get back my os on my phone.
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
sminki said:
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Click to expand...
Click to collapse
thanx for the link but in CMD commands are not working and also fastboot devices not found.
how to recognize my device i have install ADB driver and also Hisuite. i will upload pictures
passja said:
thanx for the link but in CMD commands are not working and also fastboot devices not found.
how to recognize my device i have install ADB driver and also Hisuite. i will upload pictures
Click to expand...
Click to collapse
Update....
Thank you very much for your help. actually i have changed the computer and tried again its worked perfect i have my Honor back.... thanx alot for such great help
passja said:
Update....
Thank you very much for your help. actually i have changed the computer and tried again its worked perfect i have my Honor back.... thanx alot for such great help
Click to expand...
Click to collapse
i have the same problem cant work out a fix please can you help me
Hello all !
I have Dell venue 7 3740 lte and i flashed my device following the official oss_A195.pdf guide. After FW+OS Download completed step the device is not booting into fastboot mode instead its just showing blank screen after restart. I tried flashing with windows 10 and 8.1 os (Tried installing and uninstalling the drivers too) but the result is same blank screen . I have another tablet of same model and it is booting into the fastboot mode after FW+OS completed step . I am clueless about the problem please guide me to get through the problem.
Thanks in advance !!