After 2-3 hours of work I finally managed to unlock my Honor5x, but my phone seems to **** up on these few steps of the xda guide:
Step 9
Boot back into the bootloader by typing the following
"adb reboot bootloader"
Step 10
Flash the recovery with the following command:
"fastboot flash recovery twrp_kiwi.img"
Step 11
Once it finishes type the following
"fastboot reboot"
My phone gets recognized by adb generally, but whenever I use the command adb reboot bootloader, immediately after my phone doesn't get recognized by fastboot, so the following steps don't work. The phone is in bootloader mode however, and it DOES say that it's unlocked.
Things I've tried:
Using different USB ports
Using different USB s
Unplugging and replugging while my phone is in fastboot
Installing TWRP from the TWRP manager app (It gives me an error with every single version that's available. The error message is "Something went wrong. Flashing recovery was unsuccessful. Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?" Pressing the button reboot now doesn't do anything.
Re-enabled developer mode and made sure that usb debug and oem unlock are both enabled.
Computer is: Win 10 64 bit
Wtf do I do?
Araschon said:
After 2-3 hours of work I finally managed to unlock my Honor5x, but my phone seems to **** up on these few steps of the xda guide:
Step 9
Boot back into the bootloader by typing the following
"adb reboot bootloader"
Step 10
Flash the recovery with the following command:
"fastboot flash recovery twrp_kiwi.img"
Step 11
Once it finishes type the following
"fastboot reboot"
My phone gets recognized by adb generally, but whenever I use the command adb reboot bootloader, immediately after my phone doesn't get recognized by adb anymore, so the following steps don't work. The phone is in bootloader mode however, and it DOES say that it's unlocked.
Things I've tried:
Using different USB ports
Using different USB s
Unplugging and replugging while my phone is in fastboot
Installing TWRP from the TWRP manager app (It gives me an error with every single version that's available. The error message is "Something went wrong. Flashing recovery was unsuccessful. Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?" Pressing the button reboot now doesn't do anything.
Re-enabled developer mode and made sure that usb debug and oem unlock are both enabled.
Computer is: Win 10 64 bit
Wtf do I do?
Click to expand...
Click to collapse
Install the Huawei fastboot drivers
Sent from my SM-N920T using Tapatalk
I have HiSuite, which seems to be the USB drivers for huawei, but are you talking about the ones from team android? I can't post the link because this is a new account.
Related
I'm trying to flash TWRP, i've got ADB and i've got the Universal ADB Drivers. The device is properly detected when in EUI and my Device ID is displayed correctly when I type 'adb devices', however when I reboot into fastboot and type 'fastboot devices', nothing is listed and cannot continue.
Which drivers do I use? What is it that I need to continue?
Thanks!
Edit: Nevermind, connected it into my linux machine and got it to work easier (lol winBLOWS amirite) and finally got it to recognize the device in fastboot mode. I kept rebooting and failing to get into TWRP. I found somewhere else that before doing 'fastboot reboot' that you should hold VOL UP so you can immediately boot into twrp and make it permanent, which ended up working for me. Freedom!
ItsJono said:
I'm trying to flash TWRP, i've got ADB and i've got the Universal ADB Drivers. The device is properly detected when in EUI and my Device ID is displayed correctly when I type 'adb devices', however when I reboot into fastboot and type 'fastboot devices', nothing is listed and cannot continue.
Which drivers do I use? What is it that I need to continue?
Thanks!
Edit: Nevermind, connected it into my linux machine and got it to work easier (lol winBLOWS amirite) and finally got it to recognize the device in fastboot mode. I kept rebooting and failing to get into TWRP. I found somewhere else that before doing 'fastboot reboot' that you should hold VOL UP so you can immediately boot into twrp and make it permanent, which ended up working for me. Freedom!
Click to expand...
Click to collapse
I believe you need to configure in the developers options that you don't want to have the recovery overwritten on reboot. What also seems to work is to boot into the TWRP from the command line via 'fastboot boot <recovery-file-name>'
I have the exact same problem. I have installed all drivers and adb, but as soon as i am into fastboot and my device doesnt show up in the command line. If i want to install the recovery the command line just says <waiting for device> and nothing happend.
I already enabled the "Enable AT Port" Settings (http://forum.le.com/in/index.php?threads/le-max-2-x820-qpst-not-working.14820/) but i think this is not permanent turned on on my phone, because i have to repeat this step after every reboot.
Anybody got some tips?
Edit: Also booting directly into TWRP doesnt work, 'fastboot boot <recovery-file-name>' just ends up in <waiting for device>..
If you're using Win 8 or Win 10 you should turn off the driver singing verification before installing usb drivers for device.
In your case one of the drivers was blocked from installing and the systom does not see the device after it switches in fastboot/recovery mode.
I am not allowed to post urls, so google this: How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10 (So That You Can Install Unsigned Drivers)
RovnyiK said:
If you're using Win 8 or Win 10 you should turn off the driver singing verification before installing usb drivers for device.
In your case one of the drivers was blocked from installing and the systom does not see the device after it switches in fastboot/recovery mode.
I am not allowed to post urls, so google this: How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10 (So That You Can Install Unsigned Drivers)
Click to expand...
Click to collapse
Thanks for this Hint! Didnt know this
Nevertheless, no improvement so far. I Unistalled every driver and installed them again, but the PC doesnt recognize the phone when its in fastboot mode
Kampfgans said:
Thanks for this Hint! Didnt know this
Nevertheless, no improvement so far. I Unistalled every driver and installed them again, but the PC doesnt recognize the phone when its in fastboot mode
Click to expand...
Click to collapse
There is a chance, that your computer has installed the WRONG driver for the fastboot mode, so find any related to the phone entries in Device Manager when the phone is connected in fastboot mode, and if it is not "Android Phone/Android ADB Interface" -> remove them with remove driver checkbox checked. Optionally, if nothing changes -> try to manually pick the device driver to Android ADB Interface
RovnyiK said:
There is a chance, that your computer has installed the WRONG driver for the fastboot mode, so find any related to the phone entries in Device Manager when the phone is connected in fastboot mode, and if it is not "Android Phone/Android ADB Interface" -> remove them with remove driver checkbox checked. Optionally, if nothing changes -> try to manually pick the device driver to Android ADB Interface
Click to expand...
Click to collapse
I tried it now with the fifth computer and after a few strange error messages, it "succesfully" installed TWRP.
BUT: There is no TWRP installed on my phone. I followed every tip which i found how to exit the fastboot mode (pressing Vol+ & Power / Removing USB Cable / Tried TeamSpains Automatic Installer).
What is wrong with this phone ? - I think i will oben a new thread, thanks for your help!
Kampfgans said:
I tried it now with the fifth computer and after a few strange error messages, it "succesfully" installed TWRP.
BUT: There is no TWRP installed on my phone. I followed every tip which i found how to exit the fastboot mode (pressing Vol+ & Power / Removing USB Cable / Tried TeamSpains Automatic Installer).
What is wrong with this phone ? - I think i will oben a new thread, thanks for your help!
Click to expand...
Click to collapse
Kampfgans: Klingt irgendwo zwischen lustig und richtig bedrohlich...
Lots of ROMs (including most CM variants) like to "automatically 'recover'" recoveries, that is they overwrite the recovery partition with a copy of the "original" every time you reboot.
I seem to remember that my first attempt to overwrite the stock recovery using "fastboot flash recovery <twrp-image-name>" also didn't succeed in making TWRP "stick".
Within the CM13 which I installed next (over the stock v15) there is a developer option to control that, but in this case I simply used a trick, which seems to bypass the recovery overwrite: I told the phone to boot the TWRP recovery over USB after flashing.
It went like this:
fastboot flash recovery <name-and-path-of-TWRP-recovery> //puts the TWRP image on the recovery partition
fastboot boot <name-and-path-of-TWRP-recovery> //bypasses the recovery overwrite logic of either the bootloader or whereever it hides
That booted TWRP over USB and allowed me to install CM13.
There I disabled recovery overwrite in the deveoper's options and I've never had issues with TWRP disappearing since.
Actually you should in theory be able to leave the stock recovery in place and still use TWRP by booting it over USB on the fastboot command line.
I install drivers and USB but when trying to go to fast boot I receive "waiting for device"
I ported TWRP using Android kitchen to flash to my device (Coolpad 801es) since there isn't an official version. For some reason, I can't seem to get fastboot to play nice with my phone (see my earlier post) so I used flashify. On reboot i'm stuck in a bootloop. I did have the foresight to back up my stock recovery with flashify and transfer it to my PC first, in case something went wrong. Now, I can't boot into recovery at all and ADB isn't working since the phone isn't being recognized by my PC when I plug it in. I just want to flash the stock recovery back and fix this. I can get into fastboot, and the PC does recognize the phone in fastboot, but when I try any commands it just hangs at waiting for device. I've googled but every solution i've seen for fixing a bootloop tells you to boot into recovery to do so.
Can someone please help me out?
UPDATE:
Upon further research, I discovered the reason fastboot commands weren't working is because my phone apparently isn't whitelisted in the fastboot exe. However, if I type Fastboot followed by -i 0x1ebf the commands seem to work. Using this method, fastboot devices lists my phone and fastboot reboot reboots the phone.
I think i'm on the right track, but when I try "Fastboot -i 0x1ebf flash recovery (path to recovery.img)" the terminal shows "sending 'recovery' (10240kb)..." and nothing else. No progress indicator, and i've waited 10 minutes for it to complete which should be more than enough time to flash a 10 meg file, but there's no change it just sits there. Like I said, I think i'm on the right track but I could REALLY use some help. I can't be the first person on here with this problem. Can someone, anyone, PLEASE help me.
So, more Googling would indicate that either i'm not using the correct USB port, or that my bootloader is locked. I have tried all the USB ports on my PC (front and back) as well as two different cables, no joy. As far as the bootloader being locked, the phone is rooted which I thought meant that the bootloader is unlocked as that is part of the rooting process. I try "Fastboot oem unlock" to check but I just get "failed remote no such command unlock" and there is no OEM option under developer options on this phone. I'm trying to piece this together but I could really use some help.
Hi to all,
I have a question about my device.
I hope that I have posted this correctly; if not please accept my apologies.
I have a Letv Le 2 Pro X620. This has the MTK CPU (not snapdragon).
The phone had the stock ROM on it with EUI and it got the updates.
In the last update about a month ago, Google Service stopped working; and I therefore wanted to flash a different ROM on to fix that; as well as to finally get rid of the chinese apps which annoyed me.
SO I downloaded a ROM from XDA https://forum.xda-developers.com/le-2/development/rom-lligera-t3538654 (thanks).
The device was unrooted and had the stock recovery.
I used the basic adb and fastboot command prompt applications. I already enabled developer mode in the phone and had also enabled debugging and unlocking boot loader.
In the adb/fastboot I entered the command to unlock "fastboot oem unlock" and "fastboot oem unlock go". IT would confirm and complete and then I went onto flash the recovery.
HERE IS WHERE THINGS DIDNT GO AS EXPECTED.
And I ended up doing this multiple times (i.e oem unlocking, and flashing recovery)
I tried using TWRP twrp-3.2.1-0-s2; and also downloaded a pack "Le2RootMegaPack" which had Letv-X620-Twrp-3.0.2-0 .
IT would complete successfully; but on reboot I would get an error message like "Orange State. Your phone can not be trusted" (this is not the exact message but close to it).
The message only seemed to come once as if I restarted it would disappear.
When I went back to fastboot it would say locked until i did over the fastboot oem unlock command (in other words I had to unlock everytime).
Also when I go to reboot; something about "Lock" would come in the command prompt statuses just before it rebooted.
It seems like the bootloader kept getting locked again.
So I could not boot into TWRP.
I then tried using the "fastboot boot xx.img" command which after several attempts and variations worked.
I flashed the Letv-X620-Twrp-3.0.2-0 and then "fastbook boot" booted from ANOTHER version of TWRP (as it would not boot using that same TWRP).
Then when the phone was about to restart I held up the volume up button and it booted to TWRP.
(That recovery (which I booted from) was from the ROM LeEco+x620+CM13+Rom+v145+by+Kangburra which I also downloaded from XDA.)
However the touch screen wouldnt work and I had to use a USB mouse (using the adaptors/OTG cable) and was able to control the phone in the TWRP.
I wiped the dalvik and cache and loaded the rom and it completed. then it asked to reboot which i did; and then it just wouldnt start.
The present status is that there is nothing on the Phone. I cannot boot to recovery nor to fastboot.
The only reaction I get from the phone is if I plug in a USB cable (charger). I have it plugged into the PC and the PC sound for when a device is plugged in and the sound for when a device is plugged out plays rapidly within 2-3 seconds (ie it connects/disconnects quickly).
The adb/fastboot commands do NOT work. The computer does not include it in devices etc.
I would therefore be grateful if I can have some assistance. I would like the phone to work again (obviously).
Thank you for your time.
I was attempting to flash lineageOS from https://forum.xda-developers.com/mi-pad/development/lineageos-16-0-07-12-2019-shield-blobs-t4015965. Keep in mind my firmware knowledge was less than ideal so when I got to step 5 which was "5) execute command: fastboot flash tos your path to tos.img", I copied it word for word into fastboot and obviously it didn't do anything (I didn't understand the "your path to" portion was supposed to be the file directory then) I then searched the internet trying to look for a solution, thinking I had missed a step. I came across this article https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/ and got up to step five where I executed the "fastboot oem unlock" command and unlocked my mipad's bootloader I couldn't understand the next few steps so I gave up on this set of instructions. When I reattempted to use fastboot after figuring out what "your path to" meant on the first set of instructions, my device couldn't be detected through executing "fastboot devices", my computer's device manager, or MiFlash even though all ADB drivers were initially installed and I even installed it again just to be safe. How do I get my computer to detect my mipad again? Note: my mipad is now rebooting straight to fastboot
TLDR: unlocked mipad 1 bootloader using fastboot, mipad no longer detected by computer and only reboots to fastboot. How to get mipad detected by computer
So, I recently tried to root my Redmi 5 phone and install Lineage OS into it. This is my first time doing it, so I believe I may not have understood the words I had been reading well. Due to this, I'll try to be as descriptive as possible with the actions I had taken that led to my device being stuck.
I had followed this guide, for the most part: https://www.getdroidtips.com/lineage-os-17-xiaomi-redmi-5/
As per the guide, I performed the following actions:
Enabled the developer options
Registered my device to my Mi account
Enabled USB debugging, OEM unlocking
Rebooted in fastboot mode using the ADB tools through CMD (adb reboot bootloader)
While in fastboot mode, I used the Mi Unlock tool to unlock my device.
As per my understanding, these steps would unlock the bootloader. I rebooted my device, set it up (the phone behaves as if freshly booted) and checked the settings menu after enabling developer options again. It shows the bootloader is already unlocked and that Mi Account status is also unlocked. I enabled the USB debugging options again and carried on with the guide.
I then downloaded the rosy TWRP file (version 3.5, I think).
I even downloaded GApps and Lineage 18.1 OS
I tried to copy the above files into my Redmi 5 internal storage
The Lineage and GApps file failed to copy, but I was able to copy the TWRP file
One thing to note here, I am not sure if my USB cable is faulty or if my phone's micro USB port is faulty or if my laptop's USB ports are faulty. When the phone is connected to my PC, it is extremely lousy. If I shake the cable even a bit, it disconnects and reconnects. When I try to use the file explorer to copy the files from my laptop to the android phone, it usually fails for large files or large quantities of small files. I believe this was the reason behind the failure. Nonetheless, I decided to do the TWRP part first.
The guide said to reboot in recovery mode and that would take me to TWRP recovery mode. Well, it did not! It took me to a menu that had the following options:
Reboot
Reboot to System
Back to Main Menu
Wipe Data
Wipe All Data
Back to Main Menu
Connect to MIAssistant
I assumed I had entered recovery mode incorrectly, so I followed the link in the guide on how to enter recovery mode. It suggested using the ADB tools.
I used the command: adb reboot recovery
It did the same thing that I had done. So, I assumed that that is the recovery mode, but I am unable to enter TWRP recovery mode. There was another link that would show me how to do this.
I followed that link and downloaded the files that was mentioned. However, the guide tells little to nothing on what to do with these files. The only file that was used was the rosy twrp file.
I enabled the USB debugging mode on my phone.
Opened CMD from the folder with ADB
Entered the command: adb reboot bootloader
Phone enters fastboot mode
Entered the command: fastboot devices
I can see that a device is connected
Entered the command: fastboot flash recovery rosy-3-5.img (I renamed it for convenience, I believe that was allowed because every website had different name for their file)
I then rebooted into recovery mode by first rebooting it normally: fastboot reboot
Then entering the command: adb reboot recovery
It still showed the same old recovery menu. Nothing had changed. I looked around the internet and found that I could boot with the TWRP image by entering the command: fastboot boot rosy-3-5.img
This opened the screen that I was expecting, but it did not open the chinese menu at all. It directly went to the screen that had options such as Install, Wipe, etc.,
I rebooted normally and then tried to transfer the GApps file and Lineage file into my phone. As usual, it was failing. I tried to use the adb push command and it still failed but with an error saying "permissions denied"
At this point, I looked up how to get root permissions and I learnt that I had to root my device. I looked up how to root with Magisk and SuperSU. The guides all required me to boot in TWRP recovery and then install the files from my phone. Unable to transfer the files to my phone, I uploaded the files to my google drive, and manually downloaded into my phone. I boot up rosy (TWRP recovery, or so I think) using ADB tools. Unfortunately, it does not recognize any of the files in my internal storage. Everything is empty.
Defeated by this, I decided to let it go. I had a factory reset Redmi 5 at the time. I then watched a video that showed how to root with Magisk, but wasn't specific to Redmi 5, it was a generic video for android devices.
I installed the magisk manager apk into my android phone.
Then I copied the boot.img file from the Lineage folder into my android device. Despite the OS being 600 MB large, the boot.img file was only 11 MB.
Anyway, I patched the boot.img file using magisk manager.
It created a file called magisk-patched_1pTOD.img (I'm a bit unsure of the name, but it was similar to that).
The video said that I should copy this file into my laptop and then reboot my phone into fastboot.
Once in fastboot, I had to enter the command: fastboot flash boot magisk-patched_1pTOD.img
I believed that this would root my device and grant me root access. I don't know what my actions were actually supposed to do, but my device is unusable for all intents and purposes. I rebooted the device and it shows the Mi logo for a brief moment and there's no light. An empty dark screen, it's not even a black screen. It's like the display fails to work. I can switch into recovery mode and into fastboot mode but normal reboot did the same.
Thinking that I bricked my phone, I tried to unbrick it.
I downloaded the fastboot rom for Redmi 5 rosy and then installed the Mi Flash tool along with the drivers for it.
I then selected the correct ROM folder (it kept showing up as can't find flash script until I was in the right folder for it)
Rebooted my phone into fastboot mode
Hit refresh on the Mi Flash tool
It showed my device
I chose Clean All option
I hit flash
It goes up till 97%-ish and then fails with an error saying "flash system error".
However, I noticed that now, I can see that the Mi Logo doesn't disappear now. I can still go into recovery mode and fastboot mode, but normal reboot takes me to the permanent Mi Logo Screen. I cannot even shut it down. It auto reboots to the Mi Logo Screen if I do so.
I connected my device to my laptop and then opened the ADB tools.
I entered the following command to see if it's recognized by adb:
adb devices
It did not. I then switched to fastboot mode manually by pressing the Vol Down and Power buttons.
Then entered the following to see if it is recognized in fastboot mode:
fastboot devices
It showed my device there. So I used the following command to reboot and see if it is recognized in fastboot again:
fastboot reboot
While it shows the Mi Logo screen, I typed the command:
fastboot devices
It still shows my device.
I concluded that my device is in an infinite fastboot loop. I cannot boot it up normally. I cannot flash the Redmi 5 ROM into it either. I cannot use my phone.
If anybody has actually gone through this entire mess that I made, and has figured out what went wrong or at least how to fix it, please help me.
Message me on telegram @benzoylperoxide
Hope I could help you with this situation.
If you got data, download fastboot rom based on nought and fastboot rom 9.5.30
Download latest miflash tool from miglobe website.
Install proper drivers from miunlock tool zip file.
And Hope for the best.
Ping me tommorow at anytime.
Good night Bro
incertam7 said:
So, I recently tried to root my Redmi 5 phone and install Lineage OS into it. This is my first time doing it, so I believe I may not have understood the words I had been reading well. Due to this, I'll try to be as descriptive as possible with the actions I had taken that led to my device being stuck.
I had followed this guide, for the most part: https://www.getdroidtips.com/lineage-os-17-xiaomi-redmi-5/
As per the guide, I performed the following actions:
Enabled the developer options
Registered my device to my Mi account
Enabled USB debugging, OEM unlocking
Rebooted in fastboot mode using the ADB tools through CMD (adb reboot bootloader)
While in fastboot mode, I used the Mi Unlock tool to unlock my device.
As per my understanding, these steps would unlock the bootloader. I rebooted my device, set it up (the phone behaves as if freshly booted) and checked the settings menu after enabling developer options again. It shows the bootloader is already unlocked and that Mi Account status is also unlocked. I enabled the USB debugging options again and carried on with the guide.
I then downloaded the rosy TWRP file (version 3.5, I think).
I even downloaded GApps and Lineage 18.1 OS
I tried to copy the above files into my Redmi 5 internal storage
The Lineage and GApps file failed to copy, but I was able to copy the TWRP file
One thing to note here, I am not sure if my USB cable is faulty or if my phone's micro USB port is faulty or if my laptop's USB ports are faulty. When the phone is connected to my PC, it is extremely lousy. If I shake the cable even a bit, it disconnects and reconnects. When I try to use the file explorer to copy the files from my laptop to the android phone, it usually fails for large files or large quantities of small files. I believe this was the reason behind the failure. Nonetheless, I decided to do the TWRP part first.
The guide said to reboot in recovery mode and that would take me to TWRP recovery mode. Well, it did not! It took me to a menu that had the following options:
Reboot
Reboot to System
Back to Main Menu
Wipe Data
Wipe All Data
Back to Main Menu
Connect to MIAssistant
I assumed I had entered recovery mode incorrectly, so I followed the link in the guide on how to enter recovery mode. It suggested using the ADB tools.
I used the command: adb reboot recovery
It did the same thing that I had done. So, I assumed that that is the recovery mode, but I am unable to enter TWRP recovery mode. There was another link that would show me how to do this.
I followed that link and downloaded the files that was mentioned. However, the guide tells little to nothing on what to do with these files. The only file that was used was the rosy twrp file.
I enabled the USB debugging mode on my phone.
Opened CMD from the folder with ADB
Entered the command: adb reboot bootloader
Phone enters fastboot mode
Entered the command: fastboot devices
I can see that a device is connected
Entered the command: fastboot flash recovery rosy-3-5.img (I renamed it for convenience, I believe that was allowed because every website had different name for their file)
I then rebooted into recovery mode by first rebooting it normally: fastboot reboot
Then entering the command: adb reboot recovery
It still showed the same old recovery menu. Nothing had changed. I looked around the internet and found that I could boot with the TWRP image by entering the command: fastboot boot rosy-3-5.img
This opened the screen that I was expecting, but it did not open the chinese menu at all. It directly went to the screen that had options such as Install, Wipe, etc.,
I rebooted normally and then tried to transfer the GApps file and Lineage file into my phone. As usual, it was failing. I tried to use the adb push command and it still failed but with an error saying "permissions denied"
At this point, I looked up how to get root permissions and I learnt that I had to root my device. I looked up how to root with Magisk and SuperSU. The guides all required me to boot in TWRP recovery and then install the files from my phone. Unable to transfer the files to my phone, I uploaded the files to my google drive, and manually downloaded into my phone. I boot up rosy (TWRP recovery, or so I think) using ADB tools. Unfortunately, it does not recognize any of the files in my internal storage. Everything is empty.
Defeated by this, I decided to let it go. I had a factory reset Redmi 5 at the time. I then watched a video that showed how to root with Magisk, but wasn't specific to Redmi 5, it was a generic video for android devices.
I installed the magisk manager apk into my android phone.
Then I copied the boot.img file from the Lineage folder into my android device. Despite the OS being 600 MB large, the boot.img file was only 11 MB.
Anyway, I patched the boot.img file using magisk manager.
It created a file called magisk-patched_1pTOD.img (I'm a bit unsure of the name, but it was similar to that).
The video said that I should copy this file into my laptop and then reboot my phone into fastboot.
Once in fastboot, I had to enter the command: fastboot flash boot magisk-patched_1pTOD.img
I believed that this would root my device and grant me root access. I don't know what my actions were actually supposed to do, but my device is unusable for all intents and purposes. I rebooted the device and it shows the Mi logo for a brief moment and there's no light. An empty dark screen, it's not even a black screen. It's like the display fails to work. I can switch into recovery mode and into fastboot mode but normal reboot did the same.
Thinking that I bricked my phone, I tried to unbrick it.
I downloaded the fastboot rom for Redmi 5 rosy and then installed the Mi Flash tool along with the drivers for it.
I then selected the correct ROM folder (it kept showing up as can't find flash script until I was in the right folder for it)
Rebooted my phone into fastboot mode
Hit refresh on the Mi Flash tool
It showed my device
I chose Clean All option
I hit flash
It goes up till 97%-ish and then fails with an error saying "flash system error".
However, I noticed that now, I can see that the Mi Logo doesn't disappear now. I can still go into recovery mode and fastboot mode, but normal reboot takes me to the permanent Mi Logo Screen. I cannot even shut it down. It auto reboots to the Mi Logo Screen if I do so.
I connected my device to my laptop and then opened the ADB tools.
I entered the following command to see if it's recognized by adb:
adb devices
It did not. I then switched to fastboot mode manually by pressing the Vol Down and Power buttons.
Then entered the following to see if it is recognized in fastboot mode:
fastboot devices
It showed my device there. So I used the following command to reboot and see if it is recognized in fastboot again:
fastboot reboot
While it shows the Mi Logo screen, I typed the command:
fastboot devices
It still shows my device.
I concluded that my device is in an infinite fastboot loop. I cannot boot it up normally. I cannot flash the Redmi 5 ROM into it either. I cannot use my phone.
If anybody has actually gone through this entire mess that I made, and has figured out what went wrong or at least how to fix it, please help me.
Click to expand...
Click to collapse
Flash system error in MiFlash? Probably the stock rom you downloaded and extracted is corrupted.
Please try flashing MIUI 9 for your Redmi 5.
Yeah, users have had issues with twrp being replaced by stock rom.
For TWRP,
fastboot flash revovery (recovery name.img)
Fastboot boot (recovery name .img)
After that flash your custom rom after wiping system,boot, vendor, data and cache, Internal format might be needed if it's encrypted.
Then, after custom rom is flashed, flash gapps and then twrp zip in TWRP, yeah you saw it right, flash twrp zip in TWRP. This way, twrp won't get replaced.
You can give directly flashing TWRP and flashing custom rom the way I told, Flashing Miui isn't important if your goal is to flash custom rom.