Hello
Since the flash recovery attempt cuocuo92 TWRP 3.0.0.2 my phone will not start either in normal boot or in recovery . I have access to fastboot , but whichever the recovery I successfully flash via fastboot it changes nothing . On such attempts to boot the recovery because the LEECO Recovery logo appears but it does not boot the recovery partition.
The symptom is the same for normal boot , normal boot logo then goes off with a blue LED on top .
My bootloader is unlocked and my original ROM is a multilingual version of which is unknown to me ( 13s , 14s , 15s or 16s) .
Thanks for your answer
Me also not work boot
Any answer me
Need
Rom for fastmod
Letv x820
Sitrawi69 said:
Me also not work boot
Any answer me
Need
Rom for fastmod
Click to expand...
Click to collapse
after succeful flashing recovery,type command
"fastboot boot recovery.img"
or
"fastboot boot twrp.img"
and wait a 5-15 seconds
try connect and siconnect usb cable on pc ..more , more
Related
Hello,
i have flashed the xperia 2 twrp recovery on my tablet z2. The tablet is not bricked but i cannot boot in the recovery. How can i flashed my old cm11 recovery?
Connect your z2 tablet with the computer and Start the phone in fastboot mode and flash the correct boot.img
To enter fastboot mode unplug your phone from pc then power of your phone after that press volume up and plug in the usb cabel at the same time you press
You will see the led from phone is blue now . now you open cmd.exe in adb folder and write fastboot flash boot "your path to the the boot.img" and press enter
Now it should write the new img and when its finished reboot your phone normaly or with the commando fastboot reboot
I have flashed the boot.img from. Cm11 (4-5x) but when i boot in the recovery the tablet stops in the recovery and the screen is black… no recovery
atamig said:
I have flashed the boot.img from. Cm11 (4-5x) but when i boot in the recovery the tablet stops in the recovery and the screen is black… no recovery
Click to expand...
Click to collapse
I think you should install the stock rom over flashtool or check a stock based kernel with recovery and then reinstall cm (flash zip)
i have flashed stock and go back to CM. No other way
My OPX is running marshmallow 6.0.1 oxygenos 3.1.3 for the past 1 week or a bit more after the OTA update.
I had unlocked the bootloader 2.5 - 3 weeks ago when it had lolipop but I didn't install twrp. It is still unlocked after the update obviously (i have properly checked the oem unlock by the fastboot command fastboot devices oem and advanced reboot). I downloaded the latest twrp version for the OPX: twrp-3.0.2-0-onyx.img (link: https://dl.twrp.me/onyx/) from the official site. I renamed the file to "twrp" In fastboot mode, I used the command: fastboot flash recovery twrp.img. It flashed successfully, as the 2 "OKAY"s appeared. After flashing was over, I used the recovery boot command: fastboot boot twrp.img which FAILED and gave an error- remote: dtp not found. Then I switched off the device using the power button and the tried the recovery mode combination i.e power button + volume down. Although the phone started, it didn't boot into the recovery and got stuck at the "oneplus powered by android" screen. I tried the combination again after which it switched off and returned to and got stuck at that same screen. Frustrated, I rebooted into the OS using the fastboot reboot command and booted into the recovery using advance reboot. To my dismay, I still had the stock recovery. The only difference in the recovery was that it wanted me to choose a language and then it started, just like when i had first booted into the recovery after buying the phone many months ago. I have tried this whole thing 2 times but with no luck! The twrp recovery flashes but fails to boot by any means, be it that fastboot command, the recovery mode combination after flashing successfully (and enter the boot command which fails) where it gets stuck on "oneplus powered by android screen" and rebooting into OS and booting into recovery using advance boot where the OS has already replaced twrp with the stock recovery.
PLS HELP!!
This is the guide I followed- https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/
And also, I used this video for reference- https://www.youtube.com/watch?v=RwYmyXyJeww
i installed twrp to redmi note 3 through youtube video
i downloaded something called adb platform tools
then i downloaded twrp img file
kept my phone into fastboot mode and connected to my pc via usb
in cmd prompt : 1. fastboot devices
2. fastboot flash recover twrp.img
3. fastboot boot twrp.img
and my phone went to twrp recovery mode then
swipe to allow modifications
reboot
system
this is what is did, now my phone is not booting it is just showing mi logo, before while rebooting it was showing android symbol under the mi logo now that android symbol is not showing.
i have only one phone plzzzz help
VijayKumarVJ said:
i installed twrp to redmi note 3 through youtube video
i downloaded something called adb platform tools
then i downloaded twrp img file
kept my phone into fastboot mode and connected to my pc via usb
in cmd prompt : 1. fastboot devices
2. fastboot flash recover twrp.img
3. fastboot boot twrp.img
and my phone went to twrp recovery mode then
swipe to allow modifications
reboot
system
this is what is did, now my phone is not booting it is just showing mi logo, before while rebooting it was showing android symbol under the mi logo now that android symbol is not showing.
i have only one phone plzzzz help
Click to expand...
Click to collapse
Use latest twrp 3.3.1 official for kenzo.
Installed RedWolf Recovery now its working fine
Phone Encryption doesn't work for TWRP 3.3.1-0 and 3.3.0-0
Black_Stark said:
Use latest twrp 3.3.1 official for kenzo.
Click to expand...
Click to collapse
If you want phone encryption support, use TWRP 3.2.3-0, as it doesn't work properly in the following versions, namely 3.3.0-0 and 3.3.1-0.
Hey there ! Last week i was in miui in mi a3 maybe slot b (i don't remember) and tries to go back to stock rom . I don't know what did i wipe , formate but i did something that my device isn't flashing any rom in mi flash tool it take 2000seconds + and in twrp it always shows zip error and edl mode also same problem but finally cc9e conversation rom flashed and i hard Brick my device . Stock in mi logo nothing happens . Device not going in fastboot mode nor twrp . Then i go in local repair and he put stock rom back i don't know what he did (maybe removing back and then eld flash ) but now i want to go back in miui i tried to change slot to a to flash twrp it didn't work . Only "fastboot getvar all" shows it is currently on b slot help me
I suggest you change to Slot_a and then just reboot your phone. If the repair man put stock rom back on the phone it is probably on Slot_a. On my phone (Mi A3 Global) Slot_b is where Twrp or LineageOS recovery is installed.
If you want to install TWRP, stay on Slot-b, go into fastboot mode and type:
Fastboot devices (to confirm fastboot connected)
Fastboot getvar current-slot (to confirm you are on Slot_b)
fastboot erase boot (to erase the current boot/recovery)
Fastboot flash boot twrp.img
fastboot reboot (hold down Power + Vol up button. Release Power button when 'Android One' logo appears).
Phone should boot into Twrp.
Don't use the MI Flash Tool to flash the Stock rom. Do it from Android SDK platform-tools. It worked for me.
Download the stock MIUI firmware fastboot image from: https://xiaomifirmwareupdater.com/miui/laurel/
Then follow the guide here: https://www.thecustomdroid.com/xiaomi-mi-a3-stock-firmware-guide/
hi guys, i have a problem let me explain to u what heppened and all stuffs
(my phone is redmi 9)
firstly i decided to install a custom rom and i've unlock the bootloader and i suffered in this step and then i flahsed recovery with pixel experience recovery but when i enter to recovery mode the device just reboot then i flashed recovery with twrp, i try to enter to recovery but system declins and i tried many time and finally i get into twrp, i wiped cach and i wiped all thing in list (i didnt remember but i deselect only sd card and otg maybe the problem was here and im newbie btw) and the wipe process successed, i tried flash rom with adb sideload but proccess failed idk why after that i tried flash recovery with shrp from fastboot but when i enter to fastboot using volum down + power off the fastboot still active for 5secs and exit i tried to boot into this recovery but when u complete the first step (i forget the name) but the output was like this:
[xxxxxxx]: 2.001sec
[booting]: (no input device)
command error
in booting step the fastboot exit and then when i tried many times i did this command: fastboot reboot fastboot
after this the device cant get into recovert mode or fastboot mode (when i try enter to fastboot mode the phone shows redmi logo and close immediaty 1sec or less) (system now is destroyed and i try to boot into os the phone stuck on redmi logo)
there is any way to enter to fastboot mode in this situation? i need help plz and thanks
also sorry for bad english
BESHIZUMOTO said:
hi guys, i have a problem let me explain to u what heppened and all stuffs
(my phone is redmi 9)
firstly i decided to install a custom rom and i've unlock the bootloader and i suffered in this step and then i flahsed recovery with pixel experience recovery but when i enter to recovery mode the device just reboot then i flashed recovery with twrp, i try to enter to recovery but system declins and i tried many time and finally i get into twrp, i wiped cach and i wiped all thing in list (i didnt remember but i deselect only sd card and otg maybe the problem was here and im newbie btw) and the wipe process successed, i tried flash rom with adb sideload but proccess failed idk why after that i tried flash recovery with shrp from fastboot but when i enter to fastboot using volum down + power off the fastboot still active for 5secs and exit i tried to boot into this recovery but when u complete the first step (i forget the name) but the output was like this:
[xxxxxxx]: 2.001sec
[booting]: (no input device)
command error
in booting step the fastboot exit and then when i tried many times i did this command: fastboot reboot fastboot
after this the device cant get into recovert mode or fastboot mode (when i try enter to fastboot mode the phone shows redmi logo and close immediaty 1sec or less) (system now is destroyed and i try to boot into os the phone stuck on redmi logo)
there is any way to enter to fastboot mode in this situation? i need help plz and thanks
also sorry for bad english
Click to expand...
Click to collapse
Flash the device using SP Flash tool if your device has MEDIATEK G80 processor.
mvikrant97 said:
Flash the device using SP Flash tool if your device has MEDIATEK G80 processor.
Click to expand...
Click to collapse
i will try it now ty
mvikrant97 said:
Flash the device using SP Flash tool if your device has MEDIATEK G80 processor.
Click to expand...
Click to collapse
its require boot device in fastboot or no? cuz i cant access to fastboot
BESHIZUMOTO said:
its require boot device in fastboot or no? cuz i cant access to fastboot
Click to expand...
Click to collapse
Redmi 9 brick problem solution.
1.if you are above v11.0.8.0 then go and follow below link... https://forum.xda-developers.com/t/disable-authorization-and-unbrick-your-redmi-9.4228213/ ================================== 2.Else follow it...
forum.xda-developers.com