Redmi Note 3 Special Edition (Kate) in boot loop - Xiaomi Redmi Note 3 Questions & Answers

Hi there,
I got a Redmi Note 3 Special Edition (Kate) as a gift and now it is stuck in boot loop.
Things that happened before getting into boot loop:
I activated encryption
Play Store got frozen
Things to consider:
Bootloader is locked
ADB debug mode was not turned on
I am using Linux
Now I tried all the solutions I could find, limited by the fact that I'm using Linux.
Booting into Fastboot works but I can't do much there because bootloader is locked.
Booting into Download Mode(? the one with the plugged in device screen) works, adb sees the device, but I can't boot into EDL, "adb reboot edl" reboots the phone normally.
Booting into Test Mode works, but adb does not see the device, so I can't boot into EDL.
How can I solve this problem?
Shall I find a Windows machine and use Mi PC Suite? Will that solve the problem?
I have no intention to disassemble the phone, and I would like to have a working phone. It's a bit too expensive for a paper weight.

Related

Redmi Note 5(INDIAN) Fastboot Mode Not Working Properly

Hello guys,
after entering into fastboot mode , Fastboot logo displays for about 10 seconds and then it will reboots itself into charging mode/Switches OFF. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening?
PS: Bootloader is Unlocked , I'm trying to flash TWRP
Sumer_7 said:
Hello guys,
after entering into fastboot mode , Fastboot logo displays for about 10 seconds and then it will reboots itself into charging mode/Switches OFF. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening?
PS: Bootloader is Unlocked , I'm trying to flash TWRP
Click to expand...
Click to collapse
That would happen if proper driver is not yet installed in your pc. Search for the drivers, installed first then re-connect phone to pc....

Hard bricked MiA1 (Never rooted) Test point method is also not working.

hi..
Greetings to every Android Magicians out there...!
Device:- MiA1 (Never rooted)
1.USB debugging was enabled and OEM is not enabled.
2.Hence Boot loader is Locked.
3. Adb drivers installed in my laptop.
4.Windows driver signature are disabled.
5. Xaiomi flash tool and drivers installed.
6. Qualcom HS-USB Diagnostics 900E installed.
7. Can be enter in fastboot mode and edl mode as well.
The problem:- My MiA1 was never rooted (USB debugging was enabled and OEM is not enabled.).
All apps are force stopped suddenly while using the phone so tried to reboot my devices,
and there it begins.. it stuck at boot logo.
Things i have tried:
1. Fastboot Mode:
Since the boot loader is locked i cant flash Any ROM through fastboot so i tried to enter in EDL mode through CMD.,But failed.
so i just open the back panel & however entered in EDL mode by Testpoint.
(and i've tried in fastboot through cmd { fastbooot oem unlock } it says successful but when i check the status through
{fastboot oem devices-info} but the bootloader is still locked).
2. Test Point Method:
I tried to flash MiA1 official global version ROM's (7,8,9 as well) through Xaiomi Flash tool(2015,2016,2017 versions) by test point Methods.
i have encountered the problems like AKC don't match and Cant receive Hello packets.
However i have got solved this Prolems by using Beta version of Xaiomi Flash tool.
3. When i flash (tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794) flashing was successful but devices still stuck at
Androidone logo.
Tried to flash other versions of ROM (tissot_images_V10.0.4.0.PDHMIXM_9.0) flashing was successful but devices still stuck at
Androidone logo.
By the way i have tried it using different type C cables and different ports (COM5, COM20,COM40 etc) and and different laptop as well but No luck.
i hope you guys do some Magic and help me out.
Thank you so Much for reading this thread.

Tecno WX4 "Orange State" help

I have a tecno wx4 phone and I tried to install the TWRP recovery thought adb, and it all went how it should have. But when I tried to boot it I got the this screen:
"Orange State
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds"
And I've googled about it but all solutions I found required the phone to actually boot into the OS or the recovery mode, and this phone just keeps on rebooting to this screen every 5 seconds, and it does that even when I try to boot into recovery mode, just sends me back to that screen, and the adb terminal can't detect the phone on this state.
If anyone has had a problem like this and found a solution, please help me because I ran out of ideas...
PS: I did everything I needed prior to this, enabled adb debugging, unlocked OEM through the OS first, but once I unlocked through fastboot I kept having that screen.

Mi 8 Lite stuck, fastboot not working.

Ok so my Xiaomi Mi 8 Lite was (hard??)bricked because I flashed something I shouldn't have so now I can still access recovery mode TWRP but fastboot does not work at all. I've tried flashing lineage but when I boot it back up it just brings me back to TWRP after rebooting again.
By fastboot not working I mean that once I connect the device to a computer, the phone automatically quits fastboot mode. ADB can't even seem to find it in the devices list.
What should I do? Is my phone dead forever?
Thank you!!!

Urgent help. Bootloop no ROM no RECOVERY no USB DEBUGGING

I tried flashing PixelBlaster on my realme 3 pro with no extra reseach (my fault) using TWRP. After flashing, i tried to reboot but it bootloops on realme logo (android). Fast boot is working, unlocked bootloader but turned off USB Debugging i guess because it does not show in adb. Tried other phone and turned on USB debugging and the device is listed. So now I have a realme 3 pro with NO RECOVERY, NO ROM, UNLOCKED BOOTLOADER, USB DEBUGGING OFF. When trying to boot to recovery it boots back to fastboot. When trying to boot normally, shows realme android logo then restarts.
quasar28 said:
I tried flashing PixelBlaster on my realme 3 pro with no extra reseach (my fault) using TWRP. After flashing, i tried to reboot but it bootloops on realme logo (android). Fast boot is working, unlocked bootloader but turned off USB Debugging i guess because it does not show in adb. Tried other phone and turned on USB debugging and the device is listed. So now I have a realme 3 pro with NO RECOVERY, NO ROM, UNLOCKED BOOTLOADER, USB DEBUGGING OFF. When trying to boot to recovery it boots back to fastboot. When trying to boot normally, shows realme android logo then restarts.
Click to expand...
Click to collapse
Also tried flashing twrp using adb but device not showing when used command ./adb devices in powershell

Categories

Resources