Hi,
I upgraded my HAM-L05 to B850 using the official update but now i've problems, my phone gets stuck and sometimes WLAN is not detecting any signal etc. I want to downgrade but don't know how to.
Any help please?
Related
I have tried several times to do a firmware update for the T-mobile G2 (Dutch version). I don't think there is any difference between the dutch or the english version.
Everything goes until the firmware updates really starts. I get a message bootloader starts over again! and then that the firmware update fails.
My G2 has been rooted, but i turned all back to the original backup. (I Think)
Modelnr: T-Mobile G2 Touch
Firmwareversion: 1.5
Smallbandversion: 63.18.55.06EU_6.35.06.18
Buildnr: 1.76.110.6 146733 CL#47214
Softwareversion: 1.0.0.A6288
Is there anyone who can help me so that i can use the firmware update. I hear a lot of complaint over this update, but I need to be able to acces a WiFi network.
Are you using the RUU process? If so, it's probable that it is failing the CID check as you are T-Mobile NL rather than T-Mobile UK (though I'd expect to see a message to that effect!).
What is wrong with your WiFi?
Regards,
Dave
My problem with the wifi is that i can't setup security certificates. I read that it become possible from the new firmware.
Someone told me it was possible to install the T-mobile UK version. But then i have to wait until the dutch supported version. Thank you for your response.
aimer32 said:
My problem with the wifi is that i can't setup security certificates. I read that it become possible from the new firmware.
Click to expand...
Click to collapse
I believe that is part of Donut, and not in the current update ROMs. However, if you install a rooted ROM, it is possible that this app may help:
http://www.cyrket.com/package/fan.Wifi
To reiterate - you *MUST* have a rooted ROM in order to use this application.
Regards,
Dave
Hello. Because this is a Japanese smartphone, the OTA update is available only in Japan.
Is there a way to upgrade the OS on this phone from the original version 4.4 to 5.1 in other ways?
Hishoku said:
Hello. Because this is a Japanese smartphone, the OTA update is available only in Japan.
Is there a way to upgrade the OS on this phone from the original version 4.4 to 5.1 in other ways?
Click to expand...
Click to collapse
I don't believe there is
to update to android 5.1 is not the problem, the problem is (i think) that you first have to update the software from NTT docomo network (Settings-->Device Management-->About Phone-->Software Update) (meaning you will have to bee in japan and using their network) and after that you can do the android update even outside Japan (Settings-->Device Management-->About Phone-->Upgrade Android Software)
i too own the F-02G but my advice is leave it on Kitkat the battery drain on 5.1 is way higher (found info looking at some japan forums,blogs etc.)
also you can use the application Debloater 3.90 located here on the forums to disable a lot of stuff that you don't need
hope it helps
dtoxic47 said:
I don't believe there is
to update to android 5.1 is not the problem, the problem is (i think) that you first have to update the software from NTT docomo network (Settings-->Device Management-->About Phone-->Software Update) (meaning you will have to bee in japan and using their network) and after that you can do the android update even outside Japan (Settings-->Device Management-->About Phone-->Upgrade Android Software)
i too own the F-02G but my advice is leave it on Kitkat the battery drain on 5.1 is way higher (found info looking at some japan forums,blogs etc.)
also you can use the application Debloater 3.90 located here on the forums to disable a lot of stuff that you don't need
hope it helps
Click to expand...
Click to collapse
Alas, but still need to update the docomo software and OS. The bug in version 4.4, associated with the inability to write to the SD card, is very annoying.
UpAny is useless, JPNOTA, capable of updating F-02G, is no longer available.
Have there been any ways other than sending the smartphone to Japan?
Hishoku said:
Alas, but still need to update the docomo software and OS. The bug in version 4.4, associated with the inability to write to the SD card, is very annoying.
UpAny is useless, JPNOTA, capable of updating F-02G, is no longer available.
Have there been any ways other than sending the smartphone to Japan?
Click to expand...
Click to collapse
Nope, not that i know
how upgrade os fujitsu arrows f02g to marshmallo
Docomo Fujisto F0g2 update
I have docomo Mobile Android Version 5.0.2 can i update 6.0 Version ..? and from weher.? I have tried but could not get the result in pakistan...can any buddy help me in this regard
Looking for flashfile of this device cant find it anywhere help guyz
Hello
I flashed the latest firmware available for my S6 edge (SM-G925F) : G925FXXU3DPDP (XEF).
I've never used Android 5.1.1 on my phone and I asks to you if downgrade is possible at this point (latest BL I think) and if yes, how ?
Thanks you for your further replies
Bye.
I Think Once u Flashed The latest Firmware U can't Go back
Because Of bootloader
Bt U can try Download Android LP And boot loader And put Ur phone in Download Mode Flash with odin
i updated on 6.02...
didn´t like it...
flashed back to 5.1.1 stock without problems (odin)
Hello poci,
You were running with which firmware ?
It's easy to go back to lollipop?
I'm reading some comments off people wich say No, ando some less who say Yes.
i made an OTA update from 5.1.1 to 6.0.2... but i didn´t like the battery drain on 6.0.2......(or 6.0.1 i don´t know anymore)
after clean install of 6.0.2....there was no change at all...
then i went back to 5.1.1 by flashing a stock 5.1.1. firmware with odin...no trouble or anything else...
If flash fails, is my device will be hardbricked ???
if you have the right firmware...i would say "no"
so why should it fail?
i used this firmware for my o2 edge
G925FXXU3QOLD_G925FTEF3QOL1_G925FXXU3QOJB_HOME.tar
Beceause newest bootloaders blocks downgrade, you was in which firmware on Marshmallow ?
don´t know exactly...60.1 then
when 6.0.2 blocks downgrade...
Hi guys, i am a new member and i hope i am in the right section.
I need some help on how to update my device , i am currently on 5.1.1 (rooted).
Model number : SM-G925A
Baseband version : G925AUCU3BOI2
On my device it says that i have the latest version but i want to update to marshmallow or nougat.
Thanks
P.S Some detailed help would be appreciated because i have little knowledge about android.
lunaso said:
Hi guys, i am a new member and i hope i am in the right section.
I need some help on how to update my device , i am currently on 5.1.1 (rooted).
Model number : SM-G925A
Baseband version : G925AUCU3BOI2
On my device it says that i have the latest version but i want to update to marshmallow or nougat.
Thanks
P.S Some detailed help would be appreciated because i have little knowledge about android.
Click to expand...
Click to collapse
The reason it says your on the latest firmware is because you are rooted. At&t firmware is hard to come by as they lock the bootloader and device down. If you are not bothered about root flash stock firmware and you can uodate OTA.
I have the same problem except that my phone is not rooted, im on stock AT&T Android 5, but it still says i have the latest firmware.
Someone told me that it has to be connected to AT&T cell towers to find the update but even that didn't work for me.
alireza_simkesh said:
I have the same problem except that my phone is not rooted, im on stock AT&T Android 5, but it still says i have the latest firmware.
Someone told me that it has to be connected to AT&T cell towers to find the update but even that didn't work for me.
Click to expand...
Click to collapse
I will give it a shot but first i need to find the stock firmware because its hard to find for my device specifications, and i will let you know if it worked for me
Edit: flashing the stock firmware locks phone to only at&t network since i use different network i will not try to update it
Hello!
I just updated my 925I (Mexico-Telcel) from MM to N and found out that after that I get no carrier connectivity, wifi works fine. Update was done through smart switch and noticed that imei doesn't match with the one on the back of the phone.
I've always tinkered with my phones and the one time I didn't, it bit me in the ass.
Anyway,
Baseband version is G925IDVU3FQF3
Build Number is NRD90M.G925IDVU3FQF7
I've been reading and reading but so far, I don't know if I can flash an unbloated version (925F) or not or if I can flash only the MM modem in hopes for the problem to be solved.
Any advice will be appreciated.