Email stopped working on WM6.5.5 - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

I'm using rom as in my signature.
gmail & hotmail accounts setup as pop3 have suddenly stopped working, I get error message like below .
messages cannot be downloaded to your mobile device
make sure settings & connection correct & try again
Settings are all correct & we got same fault on more than one HD2 and same via wifi or 3G .
Assuming certificate issue or protocol change the WM6.5.5 inbuilt mail app can't handle .
Had a cert expired warning message for some time but could click accept to carry on ignoring cert issue !
What email situation others having on WM6.5.5 roms ?
Will look into certs & updating but any info from others would be good ...

Well after some research & testing it is ssl protocol change.
mail works fine on a no ssl test setup, after some searching & replies in other threads issue is crypt.dll in wm6.5 only supporting sha1 and now sha2 in use .
newer crypt sha2 is available but looks to need implementation during rom building rather than easily copying/patching it in a device running rom. :-/

Unable add crypt files to roms that protected, unprotected roms would probably work with simple copying of crypt files to running rom but as most are protected (inc NRG) then it will not work.
Also unable dump from protected nbh so will need start from scratch.
If NRG had supplied a kitchen sometime after he retired from WM development it would of been a 15minute job to add the newer crypt package ...
2 easy email solutions is third party apps, profimail & nPOPuk, both work but built in outlook was/is a neat mail client.
amazingly the nPOPuk open ssl works as had better protocol standard .
apps added below if needed (all freeware). npop not nicest to use but is light & runs sd card with no installer .
Other solution is using rebuilt roms with crypt.dll already fixed. Poyensa has done this & some can be found in WM6.5 Rom area .

Try Re-routing Emails Through Local Email Service
Firstly, thank you for continuing to provide support for the magnificent HD2 - I'm on my 5th and will continue until it proves impossible - I'm currently using the Australian Telstra model T9193 but have also had a U.S. T-Mobile model and the original T8585 model.
Secondly, I had the same problem with emails for the last 12-24 months as GMail, Microsoft, Yahoo and others progressively increased their POP3 email security to TLS exclusively, however there are still many email services that continue to use SSL only, for example, iiNet and Telstra, both in Australia. All I do is make use of the free option provided by all the major email services, to forward all my emails onto another email service, from where they can come directly to my HD2 and via which I can still send out emails. For example, I configured my POP3 Microsoft Outlook email account (and others) to forward all arriving emails onto my POP3 iiNet email account, which in turn forwards all emails that arrive there onto my HD2 WM6.5 Pocket Email manager App. It all works seamlessly, just as it always did when all the services arrived separately.
The only confusion that may arise is if your correspondents realise that you give one email address which they can use to contact you but all your responses come from another email address. Frankly, no one I communicate with is savvy enough to even notice.
Cheers, and thanks again.

^ That is a good point .
I do the same for my mums phone as she has a tiscali email with ability use old ssl or none.
Problem is I have no services offering suitable email or see any available. another option could be via web hosting if you got one and have some email setting control .
Is a pain, shame the dll not easily overwritten in device rom as easy tidy fix for everyone .

Thank you for researching this. I had to pull my Tilt2 out of retirement when my M8 tanked on a WM10 build. Was able to revive it, but now that I've got the Tilt out, I plan to at least catch it up on things...

Mister B said:
Unable add crypt files to roms that protected, unprotected roms would probably work with simple copying of crypt files to running rom but as most are protected (inc NRG) then it will not work.
Click to expand...
Click to collapse
Dude, this crypt dll is a part of XIP - that means - no way to copy anything to ready rom. Besides - yesterday I just for fun cooked 29366 rom for Leo TMOUS - even with new crypt dll in xip outlook sync does not work. So - just forget it. Gmail seems to work.

Related

Exchange mail services (free / trial accounts available) includes push / aliases

hey guys from prophet forum!
had started this service out to TYTN users and figured i should spread the news around to some of the other boards. if you guys are looking for push email, please get in touch here's what i posted in the tytn forum:
I'm now offering exchange mailboxes to users (subscription based service). right now i see two, one by austindkelly in the wizard forum (he's disappeared for over a month and looks like he doens't offer his service any more) and one by denial in the kaiser section ($5/month). I thought I'd offer up a similar service starting with the hermes group (cheaper of course) with a few extra tidbits of joy...
- supports iphone exchange services, saves a heck of money over apple's mobileme service!
- outlook web access (with the advanced interface)
- 1gb quota
- both SSL as well as standard port options
- *IMAP access* - you don't even need outlook, syncs flawlessly with your phone.
- *MAPI* outlook access - hook up your outlook on your PC to sync with my service which in turn syncs with your phone. no plugging in ever needed!
- alias included (get your own email)
- changing your password through outlook web access (one-way non-reversible encryption).
I figured it's a bit of an overkill having my own exchange server that's serving a single account (i.e. mine). so why not open it up!
Price is $10 for 3 months, $19 for 6 months.
Please PM me if you're interested... I'll probably set up your account within 12 hours (probably less).
And yes, will give you unused credit money back etc etc if you're unsatisfied for whatever reason. I'm really not in this for the money, it's more to utilize something I spent hours building up, plus to cover the costs of my internet / server hardware.
And, as usual, if you need any files hosted for xda-developers just let me know, i'm already hosting over 40 ROM images and serving 5-6gb/day in ROMs from the wiki!
cheers!
free accounts:
will provide 10 rotating free accounts at any given time for test purposes, will base it off of usage. so if you use the free account, i'll keep it up indefinitely, if not then account will be removed after 14 days and given to the next person in line.
Free accounts have 50mb storage, and have no alias, and no MAPI access...
Depending on utilization I may increase this 10 free account limit.
two account requests from a couple of hours ago have been set up - please check your PMs
few people are asking about synching from multiple sources...
from my understanding i can only give you one alias for your accounts, which means you can't select your "from." however you're free to forward as many accounts as you wish to the account i create for you, but you can only send from one "alias."
another multi-synching thing people are asking is whether you can sync calendar with your desktop and email with my service. sure!! its best that way in fact - that's what i do. i have my outlook on my desktop which has my calendar, contacts, and only sync my email via push on exchange to my server... you can even take this a step further and set up IMAP access so what you see in your email client is the same as what you'll see in your pocket outlook... if you delete from your desktop, whoosh it disappears from your PDA too
this is stupid,why you people just sign up in gmail.com and start using all of the above,even better for free???
zeroed said:
this is stupid,why you people just sign up in gmail.com and start using all of the above,even better for free???
Click to expand...
Click to collapse
everyone please say hello to the latest clueless forum newbie.
chamelion said:
everyone please say hello to the latest clueless forum newbie.
Click to expand...
Click to collapse
JAJAJAJAJAJA!!
MAPI (i.e. desktop outlook) access is now enabled
still plenty of resources to use up so drop me a line if interested!
Hi chameleon. I have sent you a PM - I am keen to give this a try. I have read through the thread in Hermes section. Glad you have MAPI sorted now.
Clearly Zeroed doesn't understand the power of Exchange Server!
I read that you are using Exchange Server 2003. Do I presume you have it patched with SP2?
Thanks for providing this service. I will comment here how it works out for me as a Prophet user.
Richard
Richard Fantom said:
Hi chameleon. I have sent you a PM - I am keen to give this a try. I have read through the thread in Hermes section. Glad you have MAPI sorted now.
Clearly Zeroed doesn't understand the power of Exchange Server!
I read that you are using Exchange Server 2003. Do I presume you have it patched with SP2?
Thanks for providing this service. I will comment here how it works out for me as a Prophet user.
Richard
Click to expand...
Click to collapse
hey richard!
account set up check your PM. yep, using ES2003 with SP2.
quick note: MAPI will be a subscriber-only feature, but i'd be glad to enable it for the test users (PM me) for testing purposes.
cheers!
going to take the server down for about 15-20 minutes this afternoon for a quick reboot and offline backup. planning for 3:00pm GMT. please be patient, hopefully it should be done much much faster!
Hi friend,
Any chance you would be upgradin ExServer 2007 in the near future?Would like to try that out...
hi there,
won't be upgrading to exserver 2007 unfortunately; my hardware doesn't support it
quick question - has anyone here managed to get this to work with outlook '07? if i recall someone had, but someone pointed out that they get an error message saying that this version of outlook has been blocked by the administrator, which just isn't true
updates: outlook '07 started working - user discovered you just need to enable cached exchange mode.
i also have a couple of trial accounts left for those i turned down last week if you're still interested, shoot me a PM
Quick update regarding update in the server!
I know I've had some VERY avoidable downtimes this past few months. Because this is running on a laptop it has been unplugged from the power / ethernet while its been moved.
however good news! I've just purchased a replacement - a nice server
Specs - dual core AMD 5600+ with 2 gb RAM, 820gb storage (for those attachments ).
i'll do the switchover soon as i get the machine, should hopefully take 10-15 minutes as i just need to image the drive across.
once i get the machine i'll push up the trial accounts to 15 or 20 so if you're interested i'll post here when the migration is done and you can drop me a note
cheers!
been getting a few PMs recently about whether i still offer this (maybe its the iphone crowd finding a cheaper alternative to apple's crazy crap service!).
yes i do and i think users can attest to the fact that since the upgrade to the new server been up and running at 100% since june!
drop me a PM if any of you need service. and yes, it is compatible with the iphone - i use it on my iphone too.
quick note - yes there was a 3 hour outage between 5am and 8ish am on saturday; sorry about that. seems my ISP went down, given how short the outage was and how this was the first one in god knows how long i didn't bother spending 1/2 an hour on the phone with them figuring out what the issue was will chase it up if it happens again though!
can someone who has successfully set up outlook 07 with my service PM me with the settings they've used? i need to get some instructions on my site on how to do it, and i don't use exchange 07 myself...
thanks!
UPDATE Now offering Exchange 2010 accounts - fully compatible with latest outlook, html email etc!
Information and registration at https://exchange.etbox.info

WM 6.1 auto email setup settings

Looks like WM 6.1 has added a new "feature" since WM 6.
WM 6.1 must have a database of mail servers and their mail server settings (although incomplete). When configuring a new email account which WM 6.1 has settings for (I used gmail), right after entering the email address and password, it says...
"Auto Setup found settings for:
<account name>
To complete setup and download e-mail, click Next."
Next is your only option, and it skips past the screen where you'd normally choose the account type (IMAP4 or POP3). I haven't found a way to change that value after the account's been created.
This is a problem if you use gmail, since they offer both POP3 and IMAP4 servers, but WM 6.1 defaults to POP3 only.
Anyone can test this, you can "make up" a email address/password.
Lame huh? Anyone know of a workaround or will this need to be "cooked" out?
thats in 6.0 too, i set up my gmail account that way the day i got my phone back in june, lol
in 6.0 theres a checkbox when you put your address in, if you uncheck the box it wont try to automatically get settings
defaultdotxbe said:
thats in 6.0 too, i set up my gmail account that way the day i got my phone back in june, lol
in 6.0 theres a checkbox when you put your address in, if you uncheck the box it wont try to automatically get settings
Click to expand...
Click to collapse
Correctomundo.... that feature only works for a very few select email providers.
Are you guys using WM 6.1?
I'm aware of the check box you're talking about, but in no2chem's WM 6.1 rom the box doesn't show until the 2nd account config screen (and doesn't show at all if you start with a [email protected] address).
It's trying to be too damn smart.
Looks like no2chem is on the case!
From his realase notes for nueROM 2.0 build 5024:
Known issues:
GMAIL users are forced to use POP3 Email due to auto-detection
I haven't seen it mentioned if the issue is caused by WM 6.1 or something else in his nueROM 2.0. I hope I guessed right by not posting this in his nueROM 2.0 thread...
Nice to know I'm not hallucinating.
EDIT: apparently this issue's present in all WM 6.1 roms.
FZ1 said:
Are you guys using WM 6.1?
I'm aware of the check box you're talking about, but in no2chem's WM 6.1 rom the box doesn't show until the 2nd account config screen (and doesn't show at all if you start with a [email protected] address).
It's trying to be too damn smart.
Click to expand...
Click to collapse
that sucks, guess ill have to hold off on 6.1 until it gets sorted
but why would they put it after you enter the address? it doesnt make sense to have to option to not use auto config after it autoconfigs, lol, is this an issue in the itself or in the 6.1 version of pocket outlook? hopefully its a result of the rom cooking, but i wouldnt put it past MS to do something dumb like that either, lol
just for clarity heres where it is in 6.0, before you even enter the email address
defaultdotxbe said:
just for clarity heres where it is in 6.0, before you even enter the email address
Click to expand...
Click to collapse
Yep, that's 6.0.
In 6.1 the first account config page asks for your email address and password only. If it doesn't recognize your email domain the next page will give you the option to have it "automatically" grab the settings, just like with 6.0. You get screwed if it recognizes your email's domain (so far only gmail.com that I've found), and you don't get the option to configure the server type yourself. Pretty dumb idea by MS, at least for us.
In the thread I linked to in my edit above, no2chem mentions the auto settings should be editable, but that's beyond me at this point. That thread also mentions that this WM 6.1 build is based on a beta from MS, so maybe a release version will make things better.
I just noticed gmail.com doesn't say their problem still exists with HTML emails + IMAP + WM. Are they working now?
FZ1 said:
I just noticed gmail.com doesn't say their problem still exists with HTML emails + IMAP + WM. Are they working now?
Click to expand...
Click to collapse
yeah, in the 3.16 rom from sprint IMAP is working fine
now if gmail would just start using push-imap...
EDIT: i was just looking at my email settings and once an account is created you can still change email address and servers, just not the type of account (pop3, imap, exchange, etc) so if you put anything in the email so it wont automatically set it up you shoudl be able to change it to gmail afterward
in the account picker go to menu, then options, then select your account and you can go through an edit all the settings (in 6.0 anyway)
defaultdotxbe said:
yeah, in the 3.16 rom from sprint IMAP is working fine
Click to expand...
Click to collapse
Gmail IMAP HTML emails are also working great in no2chem's WM 6.1 rom.
defaultdotxbe said:
EDIT: i was just looking at my email settings and once an account is created you can still change email address and servers, just not the type of account (pop3, imap, exchange, etc) so if you put anything in the email so it wont automatically set it up you shoudl be able to change it to gmail afterward
Click to expand...
Click to collapse
Sure, rub it in. That works in 6.1 too. You make the third person that was able to figure that out before I did . Thanks for the help!

[APP]SendReceiveAll v.1 - Synchronize all email accounts in one click

Hey Fellows,
SendReceiveAll is just a small program that i created for my own use. In default Windows Mobile client, if you have multiple email accounts and they are set to manual download, like it is with me, While checking mail you need to go to each account and click send and receive. This is a bit tedious.
SO this program, which is a small, no-gui, .net cf app does so. It calls send and receive for all outlook email accounts. This way you can tap it once and then wait for your emails to finish loading at their own pace.
Its a very simple start and i haven't done anything profound with it. Its just an idea that clicked me.
Suggestions and Ideas are welcome from all of you
Thanks!
UPDATE : Here is the link to cab file for this utility. I haven't tested it so cant say about how reliable it is. Thanks to post&telecommunications to make and post it
SendRecieveAll v.1 Cab File
PS: It seems that this doesn't works if you have multiple IMAP accounts. The problem I think happens because IMAP accounts cannot be updated in "Background, Asynchronously". So If thats the case with you, I am sorry, I don't have any solutions right now. I will see if anything can be done about it
Thanks. Works like a charm
Glad to know that you found it useful
Yeah, I've found it a bit tricky to check all my accounts.
For further development, is it possible that you can implement a progressbar that shows, when an account is ready and maybe a dialog that shows how many emails are downloaded per account?
Yeah, I was also having these things in my mind right at the time of developing this version and i am working on these. Actually the method i use to call the sync facility of messaging application is not synchronous , ie. my app doesnt get to know when did the messaging app finished. It gets control back immediately. So i'll have to find a better way to do that. Thanks for the suggestion
Manilla sync data
Thanks for the progy! It would be nice to have this integrate with the Manila "Sync Data" button under settings, Currently this only works for syncing Activesync, but the description does say "and Internet data"
Is any software for Send only?
Is any application for Pocket Outlook, when I want only Send (not Send and Receive)?
Nice application - some suggestions
Great little application! I’ve been wanting something like this for ages – I didn’t want to set my mail accounts to send and receive every 10 or 30 minutes, I wanted them to sync when I picked up the phone and pressed a button – now I can do it without going to my gmail, yahoo, hotmail and Exchange Server pages separately!
As others have pointed out – having something that said mail account 1 of 4 synchronising would be good for progress – at the moment I don’t know whether I’ve got no emails or it hasn’t worked correctly.
If you are going to end up adding options to this, then auto disconnecting the data connection when all mail boxes are synchronised would save me another button press!
Making it work directly from send/receive in Manila is a great suggestion from ‘anothersmith’ – in the mean time I can’t get it to assign to the programs tab in Manila or via Hbutton – it doesn’t pick it up…..?
Good work.
Splelling errror!!
The reason I'm struggling to get the Hbutton to assign via the registry is that the .exe file is spelt incorrectly!
You've got it as SendRecieveAll.exe
Hbutton thread that shows registy values if anyone wants it for now http://forum.xda-developers.com/showthread.php?t=306794&page=2
Usefull application...thanks lot..
By the way ...i got problem coz im use diferent network (3g ,home and wifi)..i should sett the smtp manually before clickthis
great effort
Hi Friends,
Sorry for delay in response i was out of town Thanks for all the great responses. So i guess these are the changes i should try to implement :
1. Visual Notification of the progress and optional data disconnection at the end.
2. Integration with Manilla Sync.
3. Option to send only.
@brandall: If you add a sound to "New Email" notification in Start>Settings>Sounds and Notifications applet, you will recieve a standard notification from the messaging app about the newly recieved emails automatically. I get it on my phone.
@all: Since i only have a HTC Gene at my disposal, i cannot experiment with TouchFlo 3D features. I guess you people are talking about the sync button on tf3d, right? So can anybody tell me the integration procedure for touchflo 3d, i mean the registry keys and all.
I have 3 IMAP accounts, but it only sends/receive the last one
By the way, your app is a great idea!
I have exactly the same. 6 IMAP and it sends / receives only the last one.
Idea is great. Please correct the problem.
Oh, i didn't test it on imap, and i just returned from a long tour. I will look into it asap.
I think that the solution is to make the application aware of the synchronization status on outlook, which apparently can't send and receive from different IMAP accounts at the same time..
But it's only a personal hypothesis since I don't have the foggiest idea of how to program.
it will be greate to make gui with send/recive all... sen all ... recive alll
Hi Great app
one question, can run background? or hiden whith screen off?
i use another app to trigger the send/recieve mail by sms.
thanks
Hey Krazy - any update on this?
The original version I have still gets used every day for me!
great work however I removed .net due to memory restrictions on my xv6700 is there anyway to get the source so we can try to get this recompiled in c that way all devices could use your wonderful program. thank u again for listening
thank you for this wonderful piece of work.

[Q] SGS2 Exchange 2010 client and modded ROMs

Hi, there
New to this forum group, having just taken delivery of SGS2, with three.co.uk.
Prior to this I had an HTC HD2 with O2 UK, and made much use of the HD2 forum groups in modding that phone.
This forum group has been so active, I see a steep learning curve ahead. This is all to the good - it means folks are enthusiastic about this phone.
A major reason for me choosing the SGS2 was that Samsung Exchange client supports SMS sync with Exchange 2010 accounts.
This is vital for work, as I can send up to 1000 sms a month to clients and staff.
With SMS sync, I can keep a message history for past and current issues and projects.
My question is: should I stick to the standard Samsung ROM (it isn't "3" branded, as I got it through a reseller, and came unlocked) to keep SMS sync?
Or, can I give in to my inner geek and get modding?
There seem to be 2 main branches for mods - Samsung ROM based and "other" ROM based.
If I were to install a modded ROM would I preserve the functionality?
Or, could I reinstall the Samsung Exchange client if it wasn't present in a modded ROM?
Please excuse me if the answer is out there. I have done extensive reading and searching, but haven't found an answer yet.
If the answer to my question is "search some more, son, this has been answered already", please let me know politely.
I would suggest learning first which things do you need to be able to run SMS sync. If the only thing you need its Samsung Exchange Client, you can use any ROM you like and you can install Samsung Exchange Client app in there so you would be able to run SMS sync without problems.
If SMS sync requires certain kernel or more deeper system stuff, it would be harder to move to another ROM.
Hi, AzureusPT, and thanks for replying
I suspect it is just the Samsung Exchange client I need - it is the only one, other than WM6.1/6.5 that has the SMS sync feature enabled. Standard Android and other variants (HTC, etc.), Apple and Windows Phone 7/7.5 don't enable the necessary features.
I've tried Nitrodesk Touchdown (on a HTC Wildfire I set up for my Mom as a second phone) and it's implementation is spotty.
I guess you're right - I will have to bite the bullet and try out various options. It will be the only way to know for sure what is necessary. From your comment, I take it the Samsung email (Exchange) client is available as a separate download?
Also, I see you are using HyperDroid-Androidmeda - I was thinking of giving that a go as my first ROM rooting adventure. Is it a variant of the Samsung ROM?
I'd also be very interested about this.
Here's another (older) thread: http://forum.xda-developers.com/showthread.php?t=1012634

Did anyone get Exchange emails working yet? [CM 7.1.0]

SGH-i777 running CM 7.1.0 on Android 2.3.7. Carrier is obviously AT&T.
I can't for the life of me figure out how to add my Exchange account to the stock e-mail program. I've tried:
* Countless variations of server, domain, and username settings. I've followed this guide **can't post link** and several other guides. I do have access to my company's server information, and while I'm not sure which server is actually being used, I've tried them *all*, several times, and gotten nowhere. With a WiFI connection (no firewall) and just 3G data, signed in or signed out of Outlook Anywhere. No luck, just "Unable to open connection to server".
* K-9 connected to my account, but I was unable to see any e-mails - none would load, even when I had it force check. So I uninstalled it (would rather use the stock app anyway).
Is this a problem with my signal? I read that someone got help from their carrier - they made a custom APN, but that was in another country so I'm a bit skeptical. Can't call Samsung (it's Sunday) and their website offers no help. It's possible my IT doesn't allow phones to read mail, but that's highly unlikely - we've got lots of employees in the field, so this seems like common sense.
I did a lot of digging and this might be an old issue, but it gets pretty technical and I'm obviously a n00b.
What am I missing here???? PLEASE fill me in - I've put hours into this!!
It's quite possible that your IT group who manages your Exchange environment isn't allowing non-approved devices to connect. Typically these are security-certificate based and/or mandatory VPN requirements. I would suggest asking your Exchange administrator in your IT department about this policy.
Under Domain/username, did you try putting the "\" in front of your username? To configure mine I did this and had to use the host name as the Exchange server. Some things to try anyway if you haven't already.
Also ran into issues setting up under a public wifi at work, had to use the ATT network to make it connect for some reason.
I have my work exchange account set up.
Are you making sure to connect to the external exchange server (sometimes different from internal)?
Have you asked your administrator for exchange login details (my IT dept sent out a company-wide email once with those details)?
You might have to type the server name in manually if it doesn't auto-detect (the case with my work email).
Now, my work isn't as strict, but as the previous poster said; you're exchange server might not allow unauthorized devices to connect. In which case you'll have to contact your IT dept.
They may have simply blocked all android devices (until recently didn't support hardware encryption, and spoofed exchange permissions). If that's true, educate them.
The server name may be a link rather than a server name. Ours is mibile.XXXXX.com for example.
probably related to your company's settings. I run my own exchange server and got it sync'd fine with the current cyanogen nightly
I had problems with the stock email and our ms exchange server. I could set it up, but after a while it stopped syncing and I could never really get it back to work. I switched to Touchdown, and after a little trial and error with setup, it's working fine for me. There is a trial version for 30 days or so that you could give a shot. Happy to give you some pointers.
AtlanM87 said:
I had problems with the stock email and our ms exchange server. I could set it up, but after a while it stopped syncing and I could never really get it back to work. I switched to Touchdown, and after a little trial and error with setup, it's working fine for me. There is a trial version for 30 days or so that you could give a shot. Happy to give you some pointers.
Click to expand...
Click to collapse
+1 for touchdown. I've been using it for about a year. It's far superior to any exchange solution the Google offers. I only wish it would populate Google calendar as it does the Google contacts. The UI is getting dated as well. I wish they would come out with a cosmetic update or theme capability.
Sent from my SGH-I777 using xda premium

Categories

Resources