CM13 by Deepflex Feedback - Elephone P9000 Questions & Answers

Hi @Deepflex,
first thanks for your work. Rom works very good!
With Stable 1 I have the same Bluetooth problem that were previously fixed in RC6. The Main problem is that BT audio playback not work after reconnecting BT device.
Home button function like Stock would be nice. With button remapper app, the double tap function is not possible, without pro Version.
Add APP configuration to the left button would also be nice!
Camera APP crashes in HDR mode with 13MP.
The stock Camera has a slow motion function. This will also be nice in CM.
Many thanks

nbk35 said:
Home button function like Stock would be nice. With button remapper app, the double tap function is not possible, without pro Version.
Add APP configuration to the left button would also be nice!
Click to expand...
Click to collapse
@Deepflex have say
No, only with app Button remapper
Click to expand...
Click to collapse
@Deepflex use not the stock rom for development he use the cm 13 from other developer for work
and Deepflex use not the original Kernel
Use the original stock rom this was better and for better battery life use Doze from Playstore

nbk35 said:
Hi @Deepflex,
first thanks for your work. Rom works very good!
With Stable 1 I have the same Bluetooth problem that were previously fixed in RC6. The Main problem is that BT audio playback not work after reconnecting BT device.
Home button function like Stock would be nice. With button remapper app, the double tap function is not possible, without pro Version.
Add APP configuration to the left button would also be nice!
Camera APP crashes in HDR mode with 13MP.
The stock Camera has a slow motion function. This will also be nice in CM.
Many thanks
Click to expand...
Click to collapse
For home double tap you may want to look here: xposed p9000

qPeewster said:
For home double tap you may want to look here: xposed p9000
Click to expand...
Click to collapse
Why Deepflex can use the original Kernel and add the Original Features from the Stock Rom

I have xposed installed. Which module do you mean?

Stable 1
First thanks for all that work and love this machine.
Elephone p9000 great machine.
Deepflex thanks you for your work and effort.
About stable 1 cm13:
Pros
Great look and "feel"
Great battery time(so far the best and o already used all ROMs)
Cons
The phone gets hot and stays hot (too much?in my opinion)
The flip sensor/cover doesnt work(for those like me who bought flip cover its a bit sad not to work)
The fast charge doesnt work(for me perhaps the biggest upset,we spent money for fast charge and now we do not have it.and 1.20 charging was awesome)
Aside that its a great ROM and once again i thanks for all the support
My cons are only to alert never too say bad for those who loose hours and hours of life for the work
Salud
---------- Post added at 11:44 PM ---------- Previous post was at 11:28 PM ----------
And um sorry.i forget to tell.
I get an sd card error.
I asks me always,everytime i turn it on to format.
An error that i got a long time ago in a few ROMs.
What can i do to preventiv?
I used to have a zip wich i flash and it work to prevent bug but i deleted and dont have now :/
Someone can help?
Thanks

Awesome work so far, keep it up.
Since the beta, but only on CM i have been experiencing some crashes of the unlock screen, where it will freeze for ~30 seconds, and then resets/restarts (the launcher?)
Often goes paired with advanced notifications such as music players, not fully recovering after the 'reset', and being unusable, until the application is restarted.
Serious battery improvements over beta versions
Camera HDR still crashes
Camera can'st store photo's on SD card
FM Radio crashes on startup
Since Beta 7:
Phone doesn't connect to 3g when connected to wifi
Phone often loses connection to 3g
Phone often takes extremely long to establish 3g connection

Bluetooth Problem with my Headphones is fixed with Stable 2.

Bluetooth Car parring crashes the bluetooth stack on stabel 3
When trying to parre the P9000 with my Citroen C3 the bluetooth stack stops working. My smartwatch gets disconnected and are first able to reconnect after a disable/enable of the bluetooth.
This has happened on all builds, but works on stock.
If there is a need for logcat debug then please let me know.
Regards
Jakob

smartassistant is gone???
Where is the smartassisatant gone in settings of the phone...its lost.....cm 13 nightly

I have just installed CM13 Final Build 3. I cannot pair with my in car Bluetooth (Hyundai Tucson). For me this is a very important feature, without which I can't use CM13. Is this likely to ever be fixed or does anyone have a suggested ROM where Bluetooth works?

Stock or Eragon will work well

Fran Montero said:
Stock or Eragon will work well
Click to expand...
Click to collapse
Thanks very much. I put on Eragon 4.7 and the In-Car Bluetooth is working perfectly. I read that 4.8 comes OTA but I haven't found how to get it. Any ideas?

I went back to 4.7 from 4.8 so i recomend you stay in 4.7

I upgraded to 4.8 (there's an Eragon Update app installed with 4.7) and I'm very happy with it. Thanks for your help.

One thing I've just noticed is that my phone never switches to 4g, it's always on 3g. I'm on Eragon 4.8 now, I didn't notice if this was the case on cm13 too.

CM13 stable 3 is working good for me, except one major problem.
Netflix is opening up, but not playing any video (giving an error 1018). chromecasting a netflix video seems to work.
does anyone have the same problem? youtube and other video is working fine for me.
ps: of course I already re-installed netflix.

Related

NEW ATOM ROM ** LEAKED ** WWE_R060221N

DOWNLOAD HERE
ENJOY!!!!
Nadavi
Nadavi: many thanks. Downed and Dumped
Will have a look through - and thanks again for the registry.
V
:wink:
has anyone tried it yet ? experiences ?
when is O2 officially releasing it ?
it's working great.
has WIreless manager.
better speed.
Nadavi
Here are some screen shots of the new visible features from this leaked ROM.. very nice rom
Camera has definately improved in low light mode the picture still come up very good.. night mode also works very well.. overall nearly as good as nokia phones now
The bluetooth connections seems to be better also
The phone pad now donot delay when you have short tones enabled.
and so far i have not have any problems with this rom except that getting used to the new today page.
Assasins - Do you know how to make the Date item on the today page the same as in the old rom? Do you know any registy keys that customizes this? Thanks for the ROM by the way [/img]
Damn good catch, mate! The camera clicks, and the photo's taken, so I don't have to wait five seconds more! The picture quality is pretty similar, but good enough for me. The unit's faster, and the new functions are great. The best is the BT and WiFi controls on the today page! Finally! (OK, I've only had the thing for a couple of weeks, but I really missed that.) Most of my annoyances are totally gone, except for two: Why is WiFi off after a reset? Every other unit I've had so far, has it turned on by default. And it still turns on when it gets an SMS, if there's not some setting that I haven't yet found that stops it from doing that. Still, this unit is now very close to perfect!
Mastiff said:
Damn good catch, mate! The camera clicks, and the photo's taken, so I don't have to wait five seconds more! The picture quality is pretty similar, but good enough for me. The unit's faster, and the new functions are great. The best is the BT and WiFi controls on the today page! Finally! (OK, I've only had the thing for a couple of weeks, but I really missed that.) Most of my annoyances are totally gone, except for two: Why is WiFi off after a reset? Every other unit I've had so far, has it turned on by default. And it still turns on when it gets an SMS, if there's not some setting that I haven't yet found that stops it from doing that. Still, this unit is now very close to perfect!
Click to expand...
Click to collapse
Just downloaded and upgraded mine
Which seetings are you using? Are you saving the photo in device memory?
For me, the 5 seconds lag is still there - taking photos at 1600x1200 and saving them to mini-SD.
Also, did anybody notice the funny "plah plah" sound after turning the volume off?
it took long time for me to save a 2MP JPG to the MINI-SD...
but! if you will format your card, the speed will improve immediatly...
try.
Nadavi.
Just tried the installation as well and things are working smoothly Nice one assassins!! 8)
Funny things I noticed:
InstallShield is spelled as InstallSheild
InstallShield wizard said "(test only)"... Woooooh Just hope it won't say "invalid device" next time I upgrade to the official O2 released ROM ... :shock:
should i upgrade
my O2 came with 20060123B1WWE whould I upgrade?
I gotit from an official O2 dealer in Mumbai, India but when I try to register it O2 claims that they do not recognise the IMEI number. Why?
Navin, register via the Australian site at www.see02.com and not the UK site. :lol:
Victor
Nutdhanai said:
Here are some screen shots of the new visible features from this leaked ROM.. very nice rom
Camera has definately improved in low light mode the picture still come up very good.. night mode also works very well.. overall nearly as good as nokia phones now
The bluetooth connections seems to be better also
The phone pad now donot delay when you have short tones enabled.
and so far i have not have any problems with this rom except that getting used to the new today page.
Assasins - Do you know how to make the Date item on the today page the same as in the old rom? Do you know any registy keys that customizes this? Thanks for the ROM by the way [/img]
Click to expand...
Click to collapse
Sorry to inform u that this version is not compatible with Chinese/ Japanese enabler software (CE-star V2.8r1)!
Is it me or is this version a drain on the battery power?
It's not you, it's the WiFi. If you don't turn it off with the new, shining wireless toggle app, it will stay connected, so the unit doesn't really sleep at all. Try to ping your Atom (if you have a static IP) when it's "suspended", and you'll get answers.
Guys, what's the Storage card called on the atom? "storage card" or something else (in gsfinder etc).
V
"Memory Card". At least in WM5's File Explorer.
upgrade working fine
Did the new Rom upgrade this morning and everything is working great.
I am using 4smartphone.net (exchange server) and the push email is now working. That was the main reason for my upgrading.
I highly recomend doing the upgrade.
BT voice dial on Atom
Is it possible to make voicedial function available through bluetooth? When I press a button on my jabra BT800, Atom launches phone module and does nothing else. Could there be a registry tweak to make it launch sddial.exe while opening audio channel to/from bt headset?
Re: upgrade working fine
jkassay said:
Did the new Rom upgrade this morning and everything is working great.
I am using 4smartphone.net (exchange server) and the push email is now working. That was the main reason for my upgrading.
I highly recomend doing the upgrade.
Click to expand...
Click to collapse
How did you activate the push mail option on the atom with the new rom, couldnt seem to find it..?

WM6 Essentials ROM Free discussion

Hi, this thread is here for posts that has no room in technical discussion related to this rom. From tech discussion, irrelevent posts will be deleted without excuse, without reason. So here's the correct place for them...
Well done
I just wanted to say well done for the new fast clean rom. I'm finally over 2.5!
Everything I need to work works and well and fast. Thankyou !
Now how do we get the touch interface on the Charmer as they seem to be getting working on the Prophet??? Maybe wrong place to ask, will wait. In the meantime, thankyou again.
the bt works fine with car set
"Now how do we get the touch interface on the Charmer as they seem to be getting working on the Prophet??? Maybe wrong place to ask, will wait. In the meantime, thankyou again."
it's available for wizards - search their forums: http://forum.xda-developers.com/showthread.php?t=313656
"the bt works fine with car set "
nice to hear...go on with testing
WIFI confirmed
WIFI SDIO function has been confirmed by beta tester, loskarlitos - with some limitations like control panel not working , WIFI connection has been confirmed as stable and able to survive standby mode
Thanks Loskarlitos!
Excellent, a new rom to try!!
I can't believe I have only just found this. I could have been playing with it this evening. Its a little late to start messing now!!!
Thanks for all the hard work Nocturne.
nocturne.op.15 said:
WIFI SDIO function has been confirmed by beta tester, loskarlitos - with some limitations like control panel not working , WIFI connection has been confirmed as stable and able to survive standby mode
Thanks Loskarlitos!
Click to expand...
Click to collapse
i think the wifi control panel only works with built in hardware. thats why its removed from the official charmer roms.
hope you are right. i wil think about removal of it for the next ver.
nocturne.op.15 said:
hope you are right. i wil think about removal of it for the next ver.
Click to expand...
Click to collapse
I dont know if that's such a good idea. Some people use SDIO wifi cards and find those wifi settings useful.
Cheers,
vlodeck
as reported from my beta man, loskarlitos, and as reported above, this wifi settings applet seems to be working only with built-in wifi modules, settings are inactive for sdio cards.
Wifi SDIO owners, please share your experineces - than i can build fully functional rom stripped down from useless parts
Hi,
first of all amazing rom. Really really fast. It syncs great under Vista. To flash from Vista you have to use the "Another Flash Method". I encountered no problems with the 12 apps running, alarm or landscape problem.
Only the Calender and Contact buttons are still hardcoded to Start and Back.
problem with alarm was solved - it was really caused by underclocking charmer down to 95mhz (I'm using BatteryStatus for dynamic overclocking. 95MHz is simply not enough power to bring alarm window up and system behaves strange)
problem with changing landscape/portrait disappeared and never came back - but will keep it in buglist until this is really confirmed
lagge number of running apps stil remains - if lot of apps running, softkeys are not working as they should...hope somebody could try this on another wm6 device?
Calendar and Contacts issue
Been testing this rom for a day or two - I get the problem where Calendar and contacts won't start (whether from soft keys or the Start menu) and I have to soft-reset to egt it working. I admit I have been using iContact as well so I will uninstall that for a few days and see if the problem goes away.
closing some apps does not help? it helps for me...
customization?
Hi, when i flash yours new rom and make HR system was start and customization from old wm5 was started. In rom 4.4 customization was not started after HR, is this was changed in this release?
sorry for my english....
This was reported and will be modyfied in next ver. Till then, just skip the customization after HR
Ring tone changes....
Hi, next thing is that my ring tone changes to default without my command. I've seen this before in previous roms but in 4.4 it was ok.
I installed this last night. Seems nice and fast.
I noticed that the phone pad SIP and MMS are missing. (Installed these manually)
Also, i'm afraid the Bluetooth A2DP appears to still be the older, poorer quality version.
Cheers
phonepad sip is missing because i don't like it - it is not necessary. everybody can install it easily manually. but it will not eat precious memmory for us who does not use it ,-)
MMS support is there - no problem with it, thing you report is a bit strange...
it's hard with A2DP. Some testers were reporting it's the best A2dp they have seen - you tell the opposite. The worst thing is that i cannot test it - i do not have a2dp device :-( is possible that transfer quality is also dependent on used HW?
regarding those ringtone changes - i was testing this today (about 10 calls, some restarts etc - no problem. aren't you using any 3rd party software for phone profiles or things like that? I saw this with pocket zen phone..if not, try please to search for some dependency of this behavior so i can repair it
Thanks Nocturne.
I'm really starting to think I've flashed the wrong ROM. I've got so many on my PC now.
Can you confirm what I should be seeing under Device Information?
Thanks

Samsung galaxy note 2 - 4.4.2 ROM bluetooth does not work well!

4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Jackal107 said:
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Click to expand...
Click to collapse
i had a similar problem but with my car's bluetooth. i cleared up my contact listed and the problem was resolved.
here is where i found the solution: http://forum.xda-developers.com/showthread.php?t=2646592&page=2
hope you come right.
Please help, after 4.4.2 with my note 2, bluetooth headset connection quality got crappy. I cant walk away from my phone more than 1 meter. Anyone experiencing this problem????
...
onurcandan said:
Please help, after 4.4.2 with my note 2, bluetooth headset connection quality got crappy. I cant walk away from my phone more than 1 meter. Anyone experiencing this problem????
Click to expand...
Click to collapse
I did not find a solution yet! You yeah?
Jackal107 said:
I did not find a solution yet! You yeah?
Click to expand...
Click to collapse
I have the same issue with my headset. Hope someone will find a solution soon.
I too have same problem!!
Whats wrong with samsung!!, sometime Wifi problem and sometime bluetooth.:silly::silly:
earlier I was on 4.1.2 and it was working good with my jabra clipper bluetooth headset, after updating to 4.4.2 it sucks!.
according to my observation,
The OS is trying to save battery by limiting the bluetooth signal strength!, and the same problem with wifi also.:silly:
Looking for a workaround. If i find any will post for sure.
I have the same issue with my Note 2 after update to 4.4.2..
It seems to be a distance problem with my headset, every distance more than 50 cm creates
sound break up´s .. In my car the phone has a fixed place, it happens too, but not this much.
Maybe it is caused by a lower power managment for BT after update ?!
Found some others having the same issue e.g. here
http://androidforums.com/samsung-ga...nge-extremely-dropped-after-4-4-2-update.html
Frank67 said:
I have the same issue with my Note 2 after update to 4.4.2..
Found some others having the same issue e.g. here
http://androidforums.com/samsung-ga...nge-extremely-dropped-after-4-4-2-update.html
Click to expand...
Click to collapse
Yepp, I know that threat. But on my N7100 nothing works. In the meantime I'm on Paranoid ROM with 4.4.4 and it's a little better, but not much.
Frank67 said:
I have the same issue with my Note 2 after update to 4.4.2..
It seems to be a distance problem with my headset, every distance more than 50 cm creates
sound break up´s .. In my car the phone has a fixed place, it happens too, but not this much.
Maybe it is caused by a lower power managment for BT after update ?!
Click to expand...
Click to collapse
Hi
and have the same problem with the bluetooth, the phone in my pocket, Samsung headphones on the head and lose the music signal, conclusion .... android version
Before to upgrade I had 4.3 and works very well and now I upgraded to 4.4.2 my Note 2 with Phantom_V7.0 and work awesome but has a minus....... the bluetooth signal gets lost and it's not about the power,for ex i have battery with 4200 mAh
I will continue to keep looking this problem and I will return
There is no way to get better connection. The only way is using a 4.3 ROM
Seems like the problem is solved.
Hey guys!
It seems to me I’ve found the solution!
But firstly, a few words about the problems I’ve got…
I have Samsung Galaxy Note 2 and, when I decided to replace my old Plantronics Discovery 975 with their Voyager Edge, it had installed Android 4.3.
Both events, start using the new Bluetooth devise and upgrading to KitKat (4.4.2) occurred almost simultaneously, so it was pretty difficult to recognize what was the source of the problems that I run into – hardware/firmware issues of Voyager Edge or KitKat’s quirks. The problems were the following:
- Poor Bluetooth connection that resulted in distorted sound (not always, but often) thru the headset.
- Regularly losing the ability to use various Edge’s features, such as calling back to the last number, checking the battery status, recognizing who's calling, etc.
- Note’s battery drained badly – instead of 50-60% left at the end of the day, I got 10%...
I spoke several times with Plantronics support, but they ended advising me to replace the headset. I have neither found the specific solution in the internet and it was even reported that the factory reset would hardly help. So, that was almost the dead-end. But there was one pretty weird solution that helped to some people – deleting the duplicates in the phone’s contact list. But, since I had NO duplicates, it didn’t seem to be helpful. But then, I noticed one very strange detail – during the moments when Edge worked properly it correctly pronounced the names from my phone book, even tho some of them were quite unusual for English speaking "robot". All of them, but one – my mother’s record, which was a simple “Mom”, but when she called me, the Edge’s notification was definitely not “calling from mom”…
So, I just renamed “mom” to “mother”!
Guys, can you believe that, but ALL the problems (both phone’s and headset’s) have just gone! I’ve been using it for almost a week already and it’s OK. So, you may check your contact list, whether it sounds correctly.
Well, one issue left – weird/funny bug of the Edge’s firmware – start playing music when you take it off the cradle. (2 latest firmware updates didn’t cure that…). I just long press the voice button on the Edge to pause it. Not a big deal, to be honest.
Oh, just one last note – since Voyager Edge cannot be rebooted you can do the following if/when you neither hear the music (!), nor the report that the headset is connected when you take it off the cradle. Just long press the Call button on the headset (in my case it runs Note’s S-voice) and then everything works just fine. (Checked twice.)
Hope that this will help you too.
Cheers,
Max
Hi Max,
nice story, but I can't belive that this entry or change of entry will make the BT signal better.
cheers
Harvey
harvey186 said:
Hi Max,
nice story, but I can't belive that this entry or change of entry will make the BT signal better.
cheers
Harvey
Click to expand...
Click to collapse
Hi Harvey,
Absolutely the same reaction was mine, when I read the comment by dawolverune (see page 1 of this thread). How deleting duplicate contacts might help…
Well, if assume that I tell the truth (and I actually do! ), then the solution may be explained in 2 ways: a) logical – I’ve been hammering with all this stuff for almost a week and nothing helped until I renamed that single contact and then, it just start working and b) technical – since Voyager Edge pronounced the wrong name it means that it took it from somewhere, but definitely from the wrong place and this might require extra “efforts” from the Bluetooth receiver/transmitter, etc. This indeed may result in abnormal behavior of the devise and “eating” the battery. If re-phrase the title of S. Coppola’s movie – here we had “Lost in Bluetooth” case.
Cheers,
Max
hack fix
Jackal107 said:
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Click to expand...
Click to collapse
Am guessing someone has a fix to this issue by now, if so let everyone know
if not i just tried a hack that seems to work. when facing crackling/distortion of audio on Note2 just switch on the WiFi hotspot and range seems to improve
hope it helps......plzz educate about downsides of this hack
ivan_109 said:
Am guessing someone has a fix to this issue by now, if so let everyone know
if not i just tried a hack that seems to work. when facing crackling/distortion of audio on Note2 just switch on the WiFi hotspot and range seems to improve
hope it helps......plzz educate about downsides of this hack
Click to expand...
Click to collapse
cool, it seems, that this hack is working
Thx
Jackal107 said:
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Click to expand...
Click to collapse
I have the Exact Problem, and no one seems to have a solution to this. Did u find any by any chance ??
Thanks
SOLUTION OF BLUETOOTH DROPPING after 4.4.2 update
Yo !
I found the solution. No one has to downgrade Note 2 (N7100) to Jelly-bean in order to fix the Bluetooth range and WiFi dropping issue.
The fault is with the latest update from Samsung itself, May be it is a tactic to make people shift to the newer phones.(who knows) !
Anyway the solution to this problem is to Flash it with Odin it a previous release of 4.4.2.
In my case which is from the INU (India) region the release of August that is 29.08.2014 is a faulty update.
So i downloaded the older one and flashed it.. then everything worked perfectly as if the phone was new
Here is how to do it:- [BACKUP YOUR PHONE WITH KIES 3]
1. Check your version from *#1234#, Compare the version with Near August version of your Region. If it is same you better change it to get a way better performance.
2. Look up the earlier ROM version released from samsung-updated .com , http://samsung-updates.com/device/?id=GT-N7100&details=Galaxy_Note_2__International , I personally flashed it with the first version of Kit-Kat that came for note 2 in INU region. on the 8th April (08.04.2014).
3. Download ODIN http://www.mediafire.com/download/mbvtjub21ehsxrl/Note+2+Odin.zip
4. Install Samsung USB drivers http://www.mediafire.com/download/9qaqkld45387lzi/Skyrocket_GSII_ADB_Drivers.zip
[IF THE LINKS DON'T WORK then GOOGLE THEM AND INSTALL]
5. Power off your Samsung Note 2.
6. Hold Volume Down, Power, and Home Buttons at the same time. You will enter the ODIN DOWNLOAD MODE on your phone.
7. Press Volume up to Continue. It will Show "Downloading" "do not power off"
8. Connect your device to the PC where you have put ODIN and the md5 file (Firmware you want to flash with)
9. It will show connected to your device name on the top left of ODIN which means that it recognizes your device.
Click on PDA and select the firmware that u downloaded to flash Note 2 with.
It will lag for a few seconds but let it take its time.
When it is done. [Refer Image attached]
10. Press Start [It will take around 5 minutes, 3 minutes give or take]
11. It will Automatically Reboot your phone. Do not disconnect the USB cable.
After the boot is Complete ODIN will show a PASS on the left Side. Which means that the Flashing Process has been a Success.
If it shows fail then Repeat the process from STEP 6 all the way till STEP 11.
{ RECOVERY STEPS:- this will wipe all your data}
[Also, If device is Stuck at setup connection or on any other process, then disconnect your Note 2 from PC, close Odin, remove phone’s battery and put it back inside AFTER 5 seconds, press Volume up, Home key and Power key at the same time, When the Logo comes then Leave the Power button but keep pressing the other 2. Wait for it to show MANUAL MODE. Select Wide Data and Factory reset with Volume down and press power to continue, Then again wipe Cache.
Select Reboot . Now it should work perfectly.
CAUTION :- DO THIS AT UR OWN RISK.
Is this problem appears in official update? Want to update, but dont want any probs)
Yes the problem is with the official update. Better not update it till there is another update of it available.
I'm thinking this might have to do with Samsung dropping the Bluetooth version from 4.0 back to 2.0. I have no idea why they would do that but I've been wondering why my phone listed version 2.0 when the specs for this phone always said version 4.0. As you can see my debug screen shows it as version 2 and not 4.0. My Edge shows 4.0 on that same screen. I can't recall if older builds for the Note 2 had 4.0 listed but I believe they did and kitkat lowered it. Guess that's their trick to get people to upgrade, break things on our phones quietly...
Sent from my SM-N915P using XDA Free mobile app

Ulefone Armor 2

Hi all,
Recently got myself a Ulefone Armor 2. The device is not too bad so far. I switched to it after cracking my Power2's screen multiple times. It comes with a stupidly basic Android 7. So I just wanted to start a thread to see if anyone's got their hands on it and started hacking around. See the bookmarks below for all things customisation.
I've edited this first post multiple times to reflect the recent developments. Some people got root & Magisk working see links after my first remarks:
About the latest Software Update (aka 20180224_s21v57c2k_gq_fp or S21 GQ3037LF2 Ulefone V12 20171009-Update 20180224):
alpsayin said:
Nope, it's not the same. Something is fundamentally off with this ROM. Accessibility services get turned off automatically every time screen goes off. Half the background apps are killed every time screen stays off for a minute too. I've already reverted back to what I had before. I suggest stay away from this build.
Click to expand...
Click to collapse
If you've updated your phone to latest ROM use the below instructions to revert back but use https://www.needrom.com/wp-content/uploads/2017/11/S21_GQ3037LF2_Ulefone_V12_20171009.zip instead of the latest one:
[/U]https://forum.xda-developers.com/showpost.php?p=74294320&postcount=31
First remarks:
-Some people and I are having problems with USB-C headphone adapter (https://forum.xda-developers.com/android/help/ulefone-armor-2-t3684566/post74367962#post74367962)
-Device bluetooth volume level is separate from the headset's volume. (EDIT: fixed with recent ROM update)
-Adaptive brightness might be a tad bit aggressive in my opinion so I switched it off. (EDIT: less aggressive with recent ROM update)
-Android Pay does NOT work. It says device is not verified (which is sad, I really wanted this to work). (EDIT: works now with also recent ROM update).
-Camera button launches a camera app if you press for 5 seconds only. Useful to trigger underwater.
-SOS button needs 5 seconds push to start calling emergency contacts, but even then it causes a lot of pocket dialling.
-PTT button only works inside the Zello app. Kinda wish these buttons could be reassigned for other things (EDIT: see this reply https://forum.xda-developers.com/showpost.php?p=74451451&postcount=78).
-Generally buttons are easy to push, i change the volume every time I put the phone in my pocket, then again i might just need to get used to having a brick with 4g.
-Speakers are not great, but it's indeed waterproof. Took it into shower and gave it a good abuse.
-Fingerprint sensor is a bit annoying at times but I believe this might be because I was sent a phone with improperly attached screen protector. (EDIT: it was the badly aligned screen protector)
-Power menu doesn't have the shortcut to the power saving mode that I like so much
-Be gentle with your USB-C cap, mine broke. It's still waterproof, but now it's pretty easy to lose the cap.
-If you wanna save some serious battery, disable Google App data backup (App backup&restore).
-Sports mode in battery settings will make the phone "snappier" probably at the expense of battery life.
BOOKMARKS:
ROM Stuff (some need TWRP)
See this reply for instructions to update to recent ROM:
https://forum.xda-developers.com/showpost.php?p=74294320&postcount=31
TWRP Flashable Stock ROM with Magisk Root (Android Pay working, Buttons disabled, needs opengapps)
https://forum.xda-developers.com/showpost.php?p=74749806&postcount=174
Restore or write IMEI numbers:
https://forum.xda-developers.com/showpost.php?p=74450547&postcount=76
TWRP
See these replies for root and TWRP (v1, legacy):
https://forum.xda-developers.com/showpost.php?p=74399450&postcount=60
https://forum.xda-developers.com/showpost.php?p=74429860&postcount=68
See these replies for TWRP without OTG and root (v2, now also legacy):
https://forum.xda-developers.com/showpost.php?p=74488885&postcount=96
https://forum.xda-developers.com/showpost.php?p=74490010&postcount=97
English TWRP in zip and img formats, also something about Forced Encryption (v3, but also follow instructions from v2)
https://forum.xda-developers.com/showpost.php?p=75544568&postcount=281
Magisk and Root
Summary of SuperSU, Magisk, Xposed and Android Pay compatibilities:
https://forum.xda-developers.com/showpost.php?p=74580626&postcount=135
Magisk Installation (legacy, but use it for instructions):
https://forum.xda-developers.com/showpost.php?p=74472235&postcount=89
Latest Magisk (permissive, hidelist persists, allowing module installation, yay!):
https://forum.xda-developers.com/showpost.php?p=75803660&postcount=299
Re-flashing STOCK ROM and/or updating Magisk while keeping data (requires TWRP)
https://forum.xda-developers.com/showpost.php?p=75064226&postcount=223
Audio Issues
Fix for Armor 2 Bluetooth Disconnect Issue
https://forum.xda-developers.com/showpost.php?p=75461843&postcount=279
Audio not routing through or unstable USB-C headphone jack?
https://forum.xda-developers.com/android/help/ulefone-armor-2-t3684566/post74621805#post74621805
Tweaks (Buttons, Persistent Notifications)
How to disable default PTT & SOS functions and replace functionalities (requires ROOT):
https://forum.xda-developers.com/showpost.php?p=74445439&postcount=72
How to get rid of Persistent NFC notification
https://forum.xda-developers.com/showpost.php?p=75049379&postcount=216
Fingerprint scanner is NOT SECURE
https://forum.xda-developers.com/showpost.php?p=75796254&postcount=297
Credits: @sumec100 @djvinniev77 @enzovic @Sebastl @jemmini (? from 4pda.ru) @TuksOID @sargon__
Have you had any software issues and can you assign anything else other than emergency contacts to the SOS button? I have an LG X Power with a cracked screen and have been looking into this phone because the doogee s60 and bv8000 pro both show problems and I don't feel like spending 600 for a cat s60 or s41
Sent from my LG-K450 using XDA-Developers Legacy app
Wish there was a way I could disable the sos button on my doogee s60
Hi,
i got mine a week ago, and i think this phone is really great so far. Only thing i'm missing is a way to root it, i have tried everything i could find, but nothing has worked so far.
Tommy
I really wanted to like this phone, but Bluetooth is essencial to me, and I cant keep a Bluetooth audio connection constant with out disconnects and connects randomly, is very frustrating, I was expecting a better quality of the audio of the internal speaker when making calls, the holes of the back speaker one is a dummy the is no sound from it, and battery is good but not so good for the capacity, I was expecting more, and the camera is really sub par with a slow auto focus. I why didn't they make the screws of the sim compartment flush with case, was so simple.
fluis70 said:
I really wanted to like this phone, but Bluetooth is essencial to me, and I cant keep a Bluetooth audio connection constant with out disconnects and connects randomly, is very frustrating, I was expecting a better quality of the audio of the internal speaker when making calls, the holes of the back speaker one is a dummy the is no sound from it, and battery is good but not so good for the capacity, I was expecting more, and the camera is really sub par with a slow auto focus. I why didn't they make the screws of the sim compartment flush with case, was so simple.
Click to expand...
Click to collapse
I just tested the Bluetooth on a speaker, i had no issues with it. As for the battery, there is a lot of settings you can tweak, and turn off all of the Google draining apps. I have installed Greenify too.
Camera is not the best, but it does the job. We get what we pay for, and for that price i cannot expect to get a better phone, that probably would survive a nuclear war lol
tmiland said:
I just tested the Bluetooth on a speaker, i had no issues with it. As for the battery, there is a lot of settings you can tweak, and turn off all of the Google draining apps. I have installed Greenify too.
Camera is not the best, but it does the job. We get what we pay for, and for that price i cannot expect to get a better phone, that probably would survive a nuclear war lol
Click to expand...
Click to collapse
I'm glad that you having a better experience with Bluetooth, I do hope that I can solve my problems with it.
I also just bought an Armor 2, and I also want to be able to configure the ptt and sos buttons in a better way. I hope people who know about this give us a hand. regards
I can assign emergency contacts to SOS button. Multiple ones in fact; if first person doesn't answer automatically calls the next one and so on. I was just curious to give them other functionalities, such as launching apps.
tony442 said:
Have you had any software issues and can you assign anything else other than emergency contacts to the SOS button? I have an LG X Power with a cracked screen and have been looking into this phone because the doogee s60 and bv8000 pro both show problems and I don't feel like spending 600 for a cat s60 or s41
Sent from my LG-K450 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Did anyone manage to get Android Pay working? Android Pay doesn't verify the android, I was really looking forward to being able to use it...
I just got mine, love it for the price but unfortunately didn't read about android pay. I just tried and yep, no good to add payment cards. If you have a banking app that accepts card integration, it works that way, so it's just android pay/Google security.
Now, has anyone tried downloading the latest official ROM from needrom? They cite one from 10/9, I tried to install after ensuring the device is properly detected and the process fails. Something about Brom incompatible.
Not sure if anyone here has had successes with flashing MediaTek based devices, any tips?
djvinniev77 said:
I just got mine, love it for the price but unfortunately didn't read about android pay. I just tried and yep, no good to add payment cards. If you have a banking app that accepts card integration, it works that way, so it's just android pay/Google security.
Now, has anyone tried downloading the latest official ROM from needrom? They cite one from 10/9, I tried to install after ensuring the device is properly detected and the process fails. Something about Brom incompatible.
Not sure if anyone here has had successes with flashing MediaTek based devices, any tips?
Click to expand...
Click to collapse
Well, I was using a ulefone power 2 before this one. SP Flash tool version >5 works great. You just need to make sure device is fully powered off and connect usb cable. It might get into a bootloop, but if you start the flashing process while it's off it will get off of the bootloop and flash it. Hopefully at least.
I am using TSB, Santander, and nationwide. I guess none of them has card integration?
I'm searching a custom-Rom (lineageOS) for Armor 2. This Link ( rootmygalaxy[dot]net/lineage-os-15-for-ulefone-armor-2/) says "download it", but I can't found the Rom.
If I would self-compile it. Where I can find the driver for Armor 2?
With regards to android pay, I emailed ulefone support and they noted that they are working on it, need to get the keys to fix. They asked for device IMEI and will try to make the update via OTA. You can email them from their website. Looking at 3 weeks but I'm not counting on it. At least someone replied right away.
djvinniev77 said:
I just got mine, love it for the price but unfortunately didn't read about android pay. I just tried and yep, no good to add payment cards. If you have a banking app that accepts card integration, it works that way, so it's just android pay/Google security.
Now, has anyone tried downloading the latest official ROM from needrom? They cite one from 10/9, I tried to install after ensuring the device is properly detected and the process fails. Something about Brom incompatible.
Not sure if anyone here has had successes with flashing MediaTek based devices, any tips?
Click to expand...
Click to collapse
i installed the last room (nedroom) yesterday and was ok ok, i had a problem with connecting the usb (did not want to run the download process), helped "volume up" ON , the phone off, and then connect the usb to the pc and when I started process the "volume up" OFF , it started Mint 18.2 cinnamon 64-bit, SP_Flash_Tool_v5.1728_Linux - run as root , the MTKxxxx driver setting, for linux is here on XDA.
I would also be happy for recovery and root for armor 2.
with greetings of sumec.
sumec100 said:
i installed the last room (nedroom) yesterday and was ok ok, i had a problem with connecting the usb (did not want to run the download process), helped "volume up" ON , the phone off, and then connect the usb to the pc and when I started process the "volume up" OFF , it started Mint 18.2 cinnamon 64-bit, SP_Flash_Tool_v5.1728_Linux - run as root , the MTKxxxx driver setting, for linux is here on XDA.
I would also be happy for recovery and root for armor 2.
with greetings of sumec.
Click to expand...
Click to collapse
Nice. Did you wipe everything or was it an in place update that retained your data?
djvinniev77 said:
Nice. Did you wipe everything or was it an in place update that retained your data?
Click to expand...
Click to collapse
I deleted everything like a new phone. If you have a backup date so when you start offering a recovery from a backup or as a new phone. Every update to rom through flashtool makes full wipe data, so it's a good root and recovery.
Is there any way of disabling that wretched camera button ? I am fed up with clicking noises from my pocket as it takes shots, and deleting them all afterwards....
Gnubi said:
Wish there was a way I could disable the sos button on my doogee s60
Click to expand...
Click to collapse
I use the APP "Button Mapper" Ver: 0.54 Free
You can reconfigure PTT and SOS buttons to open your desired Apps.
You can also disable operation with the Lock-screen
My actual configuration for PTT button is:
Short press: Nothing,
Long press WhatsApp,
Double press: switch between DND, Vibrate and Outdoor sound mode
and for SOS:
Short press: Nothing,
Long press: PayPal
Double press: Shazam
wilkofife said:
Is there any way of disabling that wretched camera button ? I am fed up with clicking noises from my pocket as it takes shots, and deleting them all afterwards....
Click to expand...
Click to collapse
Camera button requires pro version, but I can live without it :good:
I noticed today that my USB-C to headphone jack cable is not working. Anyone else had that problem?
Also, ButtonMapper works great but sometimes it causes a soft reboot...

Redmi Note 9 Pro (Joyeuse) Raise to wake not working

So when i first got the phone this feature was working great. However, i don't know when but it had stopped working and I've just realised this. All the sensors seem to be working fine according to CIT tests, also clear data of the settings app, switched this feature is and off but no results. What else can i do? (Except for resetting)
Use the stock launcher.
luksona2002 said:
So when i first got the phone this feature was working great. However, i don't know when but it had stopped working and I've just realised this. All the sensors seem to be working fine according to CIT tests, also clear data of the settings app, switched this feature is and off but no results. What else can i do? (Except for resetting)
Click to expand...
Click to collapse
Are you using third party launcher? If yes, use the stock launcher. Your problem might be resolved!
jahangirbsmrau said:
Are you using third party launcher? If yes, use the stock launcher. Your problem might be resolved!
Click to expand...
Click to collapse
Already tried that but no luck, prior to that, i received 11.0.4 update and it seemed to have worked for a coupke of days, but still doesnt work anymore
Hey man, have you resolved the raise to wake issue? My problem is similar, my redmi note 9 pro on android 11 stock launcher has the raise to wake feature that stops working every 5 days, meaning every 5 days I reboot phone for the feature to work, then after 5 days it seases to work and I have to reboot phone again for it to work and so on.
Any idea what could be the issue? Gyroscope is working fine as well as accelerometer.
Appreciate any help, i haven't rooted the phone yet, so cannot do much from shell termux...
Regards

Categories

Resources