RADIOACTIVE KERNEL
for NOUGAT Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 50% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with Uber-naro 4.9 Toolchain
New Synaptic drivers from CM12.1 - per-panel firmware loading
Linux 3.4.112
Latest CM14 Bacon patches
Latest Common Branch patches
Latest Linux 3.4.x patches
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Intellihotplug hotplug driver
Alucard hotplug driver
Zen decision hotplug driver
Zzmoove native hotplug canbe activated setting disable hotplug to 0 in his tunables
CPU Freqs Table: 268Mhz 2880Mhz
GPU Freqs Table: 200Mhz 587Mhz
CPU Freqs Limiter Drivers
Intellithermal full Control
XZ Kernel Compression
LZ4 Support
ZRAM Support
Option to enable/disable Fsync
Deadline, Row, Cfq, Bfqv7r5, Noop, Fiops, Sio, SioPlus, VR, Zen, Tripndroid
Disabled IO Stats
Smartmax, Interactive, Conservative, Impulse, ZZmoove, Performance,Smartmax_eps,Elementalx,Yankactive,Opt imax,Bioshock,Alucard,Dancedance,Darkness,Intellim m,Hyper,Barry Allen,Bluactive,Adaptive,Wave,Wheatley,Lionheart,P egasusq
Kcal Control: Colors, Saturation, Huge, Contrast and more
Kcal Profiles Supports
Voltage Control
Sound Control
Charge Control
Kexec Hardboot - Multirom
Ntfs Support
Gentle Fair Sleepers (Disabled by default)
CIFS Enabled
NFS v3 & v4.1 Enabled
Optimized RWSEM Algorithm
Auto FS Laptop Mode
Arch Power
Power efficient workqueues
Ksm
Sdcardfs enabled
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
× Here
DOWNLOADS
× Here
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
*nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
XDA:DevDB Information
RADIOACTIVE NOUGAT KERNEL, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/android_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: V1.5
Beta Release Date: 2016-08-28
Created 2016-08-28
Last Updated 2016-12-15
Can i flash this on updateings ROM?
SaneQ said:
Can i flash this on updateings ROM?
Click to expand...
Click to collapse
sure
cool
You're fast...
Can confirm working on @updateing 's N Build.
The only problem for me, is slow charge.
Good kernel
Working fine on updating's Build. Great work mate. BTW Phone is very hot to the touch with both stock kernel and this one. Can any good soul suggest me a workaround/ tweaks to fix this? Thanks in advance.
aukdrck said:
Working fine on updating's Build. Great work mate. BTW Phone is very hot to the touch with both stock kernel and this one. Can any good soul suggest me a workaround/ tweaks to fix this? Thanks in advance.
Click to expand...
Click to collapse
Make sure this process is killed:
com.qti.dpmserviceapp
Some people just blocked it's notification and it continues to run in the background.
Better yet, update to the 8/28 build of the 7.0 ROM
Hi Acuicultor!
You could put fast charge in your kernel?
To appers and change ma on Synapse
Please ^^
Tnx and amazing kernel
KenjiHannya said:
Hi Acuicultor!
You could put fast charge in your kernel?
To appers and change ma on Synapse
Please ^^
Tnx and amazing kernel
Click to expand...
Click to collapse
Already there
Enviado desde mi A0001 mediante Tapatalk
How can I make this work with Chainfire's systemless root?
dev_freak said:
How can I make this work with Chainfire's systemless root?
Click to expand...
Click to collapse
There's any problems with supersu systemless, just flash latest supersu zip.
Enviado desde mi Z1 mediante Tapatalk
Great work, running so smooth.
Thanks for the job!
Enviado desde mi OnePlus One.
Good Kernel.
I did something in the first test was not the same.
But clean flash give me this sot
No lags
Good SOT
Good performance and I will keep trying to create a better profile
https://plus.google.com/+JPKenji/posts/SbQoTpRCMFC
Tnx for the Kernel
Good work!
crisis_trustee said:
Good work!
Click to expand...
Click to collapse
Yeah, the answer was pretty obvious, wasn't it? I'd be facepalming myself to unconsciousness if you thought flashing this kernel on any Marshmallow rom would be a good idea.
Camera fix ??
Sent from my A0001 using XDA-Developers mobile app
billbuds said:
Camera fix ??
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Depends what it is this fix.
In N all Kernel i testes dont record video
Is it supports f2fs on data and cache
Related
Zombie-Kernel
Here's my Zombie-Kernel for the Xperia Z Ultra.
I will frequently update the Kernel with useful features and backports from Linux
Mainline. If you have any feature requests please use the devdb tab above. Thanks.
The first post contains all Lollipop stuff, the second one everything KitKat related.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Lollipop Releases:
Source:
https://github.com/Tommy-Geenexus/android_kernel_sony_msm8974
Downloads:
https://www.androidfilehost.com/?fid=95916177934537940
Features:
* Compiled with the latest Linaro GCC 4.9.2 and -02
* GZIP Compression/ Decompression
* Many Backports from Linux 3.6+
* MPDecision & Optimized Intelliplug
* In-Kernel Thermal Solution
* Display Color Control (saturation, rgb, greyscale, inverted, hue, value)
* Powersuspend
* FauxSound
* CPULimiter for full core control
* F2FS support
* Power-Efficient-Workqueues
* Reduced ghost touches to a minimum
* Voltage Control
* Headset Wakeup
* Kexec support
* ZRAM & ZSMALLOC
* Kernel Samepage Merging (KSM)
* NTFS r/w support
* Use your device as USB-keyboard/mouse
* Updated Interactive, Ondemand and Conservative Governor
* Updated cpuboost, kgsl, devfreq and other drivers from CAF
* Added NEON mode, NEON Crypto and enabled more digests
* More TCP Congestion Algorythms
* BFQ, FIOPS I/O Scheduler and Impulse Governor
Changelog:
17.01.15
* Initial release
21.01.15
* Added and updated kernel code
* Intelliplug and thermal
* Tweaked ramdisk
* Made ramdisk TWRP compatible
28.01.15
* Tons of backports
* Optimized Intelliplug
* hopefully fixed ghost touches
* Source sync'ed with latest CM
06.02.15
* Tons of backports
* Tuned Intellli_plug and removed MPdecision
* More touchscreen driver tweaks
* Sync'ed with CM
08.02.15
* New thermal driver, much cleaner
* Optimized Intelli_Plug
* Merged a patch for the ipv4 subsystem from upstream which fixes a problem that could make the system go out of memory in some cases (quoted from franciscofranco)
14.02.15
* Updated Intelli_Plug
* Switched to GZIP Compression
* Merged all feature requests
* Added Impulse Governor
* Other misc updates
18.02.15
* Updated Intelli_Plug
* Upstream updates to sched
* Other fixes from Linux Mainline
* Sync'ed with CM
20.02.15
* Updated Color Control Driver
* CAF fixes
* Brought back MPDecison as default hotplug
27.02.15
* Ramdisk sync'ed with CM for compability
06.03.15
* Switched to more reliable CAF-Thermal
* Updated Color driver
* Updated Impulse Governor - it now works as it was designed to
* Random Code fully updated to Linux 3.10
* Sound Codec fixes from CAF
* Sync'ed with CM
XDA:DevDB Information
Zombie, Kernel for the Sony Xperia Z Ultra
Contributors
Tommy-Geenexus
Kernel Special Features:
Version Information
Status: Beta
Created 2014-11-02
Last Updated 2015-03-07
Reserved
KitKat Releases:
Kernel Source:
https://github.com/Tommy-Geenexus/kernel_sony_msm8974-old
Downloads:
https://www.androidfilehost.com/?fid=95832962473394893
Reserved
Kernel Control:
UKM and Synapse:
http://forum.xda-developers.com/xperia-z-ultra/general/zip-synapse-script-universal-kernel-t2994224
Hint: Synapse may not be 100% stable on Lollipop yet.
USB-Keyboard-App:
https://play.google.com/store/apps/details?id=remote.hid.keyboard.client
Thanks:
I would like to thank all devs involved (credits in the repo) , Christopher83 for his toolchain builds and osm0sis for AnyKernel2.
Also i'd like to thank Sony for beeing such helpful towards devs and users on xda.
Tommy-Geenexus said:
- Zombie Kernel, this time for the Xperia Z Ultra.
Click to expand...
Click to collapse
Hi.Thanks for the provided kernel. Tell it only on the basis of CM? On SLimKat it is possible to set?
Feodorus 4PDA said:
Hi.Thanks for the provided kernel. Tell it only on the basis of CM? On SLimKat it is possible to set?
Click to expand...
Click to collapse
All cm based roms will work: pa, slim, etc..
I'm currently running it on slim.
Sent from my Xperia Z C6603
Tommy-Geenexus said:
All cm based roms will work: pa, slim, etc..
I'm currently running it on slim.
Sent from my Xperia Z C6603
Click to expand...
Click to collapse
I'm taking it is based on CM11's kernel - too lazy to look
blueether said:
I'm taking it is based on CM11's kernel - too lazy to look
Click to expand...
Click to collapse
Yeah, based on cm, all other roms use stock cm or cm based kernels.
Sent from my Xperia Z C6603
Hi guys,
a new kernel is up.
Changelog is attached @ the second post.
More features will come soon.
runnin smooth with the latest slimkat weekly on my c6806
New Kernel is up.
Grab it from the OP and profit!
add dt2w in new release!
madsponge26 said:
add dt2w in new release!
Click to expand...
Click to collapse
the upcoming release will feature backports from caf and linux and a rewritten anykernel, but i'll look for dt2w for sure.
New update out!
AnyKernel2 is rewritten, now removes scheduler/readahead overrides present in cm ramdisk.
Kernel is updated with backports and other stuff.
I've added logger control via sysfs:
path: sys/module/logger/parameters/log_mode
// 0: Enabled, 2isabled
Flash and enjoy.
Last KK update
Hi folks, here is my last kk update.
I've rebased the kernel on slimkat-kernel, and added my optimisations on top of it.
I've removed over 40k lines of unused deprecated code!
It will run best with slim.
See here for the changes i made.
Download: https://www.androidfilehost.com/?fid=95784891001611475
Flashing now. CM11 M12
Edit: wow! Very smooth
48 hours reporting for battery juice.
Sent from my Bacon Machine
madsponge26 said:
Flashing now. CM11 M12
Edit: wow! Very smooth
48 hours reporting for battery juice.
Sent from my Bacon Machine
Click to expand...
Click to collapse
Thats the purpose, more smoothness and (hopefully ) some juice saving
Tommy-Geenexus said:
Thats the purpose, more smoothness and (hopefully ) some juice saving
Click to expand...
Click to collapse
Mate, why dont you include pegasusq gov?
Sent from my Bacon Machine
madsponge26 said:
Mate, why dont you include pegasusq gov?
Sent from my Bacon Machine
Click to expand...
Click to collapse
Well, this is simple to answer.
I won't include any other than the already included governors.
For a fact all these govs like lionheart, etc.. were designed years ago and deliver subpar performance compared to the included governors, as they are designed with old single or dualcore devices in mind ( and pegasusq uses its own hotplug logic).
Only difference are faux intelli governors which are quite actual codewise, and a few more others which are optimized for modern devices.
But the best performance and battery life will be achieved using a frequently updated interactive or ondemand governor.
@madsponge26
i'm working on bringing dt2w.
I'll see if i can fix a few things such as >2taps mostly and implement a wakeout time like flar2.
It's already working quite good, thanks @blueether for the base.
I can't do much on lollipop as my knowledge is very limited and c only, so i'll let the others who have more knowledge doing their job and supporting them if it's in my range.
Aditya Kernel for the Nexus 5 (Hammerhead) by @javelinanddart
Code:
#include std/disclaimer.h
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. :P
* blah blah blah you get the point.
*/
Post #1: Disclamer, special thanks
Post #2: Features
Post #3: Downloads
Post #4: Changelog
Post #5: FAQ
Note: This is based Directly of Faux's Kernel, I don't own the Nexus 5 but I do have a tester. If anything goes wrong report it here and to faux123
Enjoy and Happy Flashing!
Credits and Thanks:
google, faux123, christopher83, flar2
I recommend that you use Faux's Kernel Control App OR Trickster Mod
XDA:DevDB Information
Aditya Kernel, Kernel for the Google Nexus 5
Contributors
javelinanddart, faux123, flar2
Source Code: https://github.com/javelinanddart/android_kernel_lge_hamerhead
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-11
Last Updated 2014-12-13
LOLLIPOP
Features:
Based on Linux 3.4.10
Compiled with linaro toolchain 4.9.3 2014.11 optimized for cortex-a15
Available CPU governors: elementalx, ondemand, performance, powersave, intellidemand, intelliactive, intellimm
Available GPU governors: ondemand, performance, simple
Available schedulers: row, deadline, noop, cfq, bfq-v7r5, fiops, sio, tripndroid, zen, vr, fifo
IntelliPlug
NTFS R&W Support
exFAT Support
UTF8
BLN
Voltage control
Sweep2Wake
DoubleTap2Wake
Pocket Detection
IntelliThermal v2
zRam with LZ4 compression
zCache with LZ4 compression
CPU OC to 2.8GHz
Faux Sound Control v. 3
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version), XOR (neon)
Dynamic FSYNC by faux123
Fastcharge
powersuspend driver (replace earlysuspend)
KCAL control (RGB)
Gamma Control
heavily patched memory allocators, RWSEM and mutex (take a look at my github, too many changes to make a list here)
FRANDOM Support
Multi-ROM Support
F2FS Support
NEON Support
Snake Charmer
Hybrid Kernel
SELInux Optimization
DOWNLOADS
https://www.androidfilehost.com/?w=files&flid=22543
https://mega.co.nz/#F!hgQQDRLB!RVP6cdcHUZB653xxwBnz6A
Changelog:
Dec 12
Release Test version with Linux 3.4.10
Release a possible fix: Switch to ElementalX governor and CFQ I/O Scheduler
Dec 11
Initial Release
Based on Faux's Kernel
Add SIO, VR, ZEN, FIFO, and TRIPNDROID I/O Schedulers
Add Frandom Support
Add ElementalX governor (replace interactive governor)
Add S2W, S2S, and DT2W
Tnx for a new kernel
HOW TO INSTALL
Method 1:
Flash in Recovery (TWRP or CWM)
Method 2:
Extract boot.img from the zip
In fastboot mode:
Code:
fastboot flash boot boot.img
then wipe cache
Code:
fastboot erase cache
Method 3:
Extract boot.img from the zip
Use a tool to flash the boot.img
Method 4:
Extract the boot.img from the zip
in terminal:
Code:
dd if=boot.img of=/dev/block/platform/msm_sdcc.1/by-name/boot
Always be sure to wipe cache and dalvik after installing. Enjoy!
abalam said:
Tnx for a new kernel
Click to expand...
Click to collapse
Was that sarcastic or real?
Also, NP, I just wanted to make one to add some features and touches to faux's like more i/o scheds, frandom support, and I'm working on getting it up to Linux 3.4.105
EDIT: First Build is up! Grab it at my AFH in the 3rd post
MEGA Mirror coming soon!
javelinanddart said:
Changelog:
Dec 11
Initial Release
Based on Faux's Kernel
Add SIO, VR, ZEN, FIFO, and TRIPNDROID I/O Schedulers
Add Frandom Support
Click to expand...
Click to collapse
Please try to add blue_active governor
pianistaPL said:
Please try to add blue_active governor
Click to expand...
Click to collapse
Working on adding that as well as elementalx
I'll probably build that later today or tomorrow
Nice features in Kernel gj, but I have bootloop on Nexus Experience ROM :/
Looking forward for next build
pandza88 said:
Nice features in Kernel gj, but I have bootloop on Nexus Experience ROM :/
Looking forward for next build
Click to expand...
Click to collapse
Are you on the AOSP one or the CM or PA one?
If it's the AOSP one it uses the stock-based kernel so it should work just fine
javelinanddart said:
Are you on the AOSP one or the CM or PA one?
If it's the AOSP one it uses the stock-based kernel so it should work just fine
Click to expand...
Click to collapse
Is your kernel a sleeper like the name suggest? Had a buddy uses to brag about his Amc Javelin all the time Said it was un-assuming but fast as lightening, thanks for sharing!
razrlover said:
Is your kernel a sleeper like the name suggest? Had a buddy uses to brag about his Amc Javelin all the time Said it was un-assuming but fast as lightening, thanks for sharing!
Click to expand...
Click to collapse
I have a friend named Aditya who has a Nexus 5, so I named it that. (ironically, he couldn't flash it because he didn't want to root so it started getting messy)
my username is javelinanddart because my first phone was a peice-of-**** samsung dart, and a javelin is a huge dart (basically) and I liked it so it stuck.
Hey guys! 2 New builds up in my AFH
Build 2-add s2w,s2s,and dt2w
Build 3-remove interactive governor and replace it with elementalx + s2w,s2s,and dt2w
blu_active is being buggy as hell for me so I'm going to leave it for right now
I might readd interactive and make elementalx a module but we'll see
Enjoy!
A new kernel is welcome always ? I 'll try it. Thank you.
javelinanddart said:
Are you on the AOSP one or the CM or PA one?
If it's the AOSP one it uses the stock-based kernel so it should work just fine
Click to expand...
Click to collapse
I am on n5x AOSP but can't boot with your kernel. It stuck on Google screen. Other android 5 kernels boot just fine. I will try new build now.
---------- Post added at 01:36 PM ---------- Previous post was at 12:42 PM ----------
Still same...
javelinanddart said:
Hey guys! 2 New builds up in my AFH
Build 2-add s2w,s2s,and dt2w
Build 3-remove interactive governor and replace it with elementalx + s2w,s2s,and dt2w
blu_active is being buggy as hell for me so I'm going to leave it for right now
I might readd interactive and make elementalx a module but we'll see
Enjoy!
Click to expand...
Click to collapse
I'm curious to know if there is any reason behind kernel name.
neobuddy89 said:
I'm curious to know if there is any reason behind kernel name.
Click to expand...
Click to collapse
I have a friend named Aditya who has a Nexus 5, so I named it that. (ironically, he couldn't flash it because he didn't want to root so it started getting messy)
Click to expand...
Click to collapse
That's why
pandza88 said:
I am on n5x AOSP but can't boot with your kernel. It stuck on Google screen. Other android 5 kernels boot just fine. I will try new build now.
---------- Post added at 01:36 PM ---------- Previous post was at 12:42 PM ----------
Still same...
Click to expand...
Click to collapse
That's really odd.
IDK What to do as it's working for everyone else
javelinanddart said:
That's really odd. You have unlocked bootloader and custom recovery right?
I'll try to make another build in a sec that might work, i"ll attach it when I"m done
Edit: Try this one
Faux123's works for you right? If so, this should as well. If not, you're probably doing something wrong
Click to expand...
Click to collapse
Faux work I am using it now.
New one gives just black screen nothing else :S
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTE »
Fz Kernel
Only for 8.1, 9.0 & 10.0 ROMs.
ABOUTThis kernel was made using the current LineageOS kernel source as base and merged all the necessary changes to work on Android 10 (Ten). On top of it I then added some features for it to be customized by each user if they do want to.
Feature list
Replaced Qualcomm cpu-boost with Sultanxda cpu_input_boost driver.
Replaced Qualcomm MPDecision with NVIDIA CPUQuiet driver from Tegra CPUs.
Charging current customization Interface.
Voltage control for undervolting.
KCAL Color Control support.
Simplified Thermal driver.
Franco's Wakelock blocker.
Franco's Sound Control.
Franco's Backport of POWER_EFFICIENT workqueues.
Enabled Multicore power saving.
A LOT of under-the-hood optimization changes from Sultan, Franco, Boeffla, arter97 and many others.
Fixes USB MTP without enabling USB Debugging.
Fixes Data Saver.
Smooth default kernel behavior using ZaneZam's zzmoove governor with ZZ Battery Plus profile.
Custom Governors:
Alucard
Impulse
Intelliactive
Intellimm
Lionheart
Smartmax
zzmoove
Custom Hotplugs:
MSM Hotplug
AutoSMP Hotplug
CPUQuiet
Custom I/O Schedulers:
FIOPS Scheduler
SIO Scheduler
TripNdroid Scheduler
zen Scheduler
DOWNLOAD HERE
OTA Updates
Going forward, kernel OTA updates will now be handled via Franco's Kernel Manager app. Users may import the following URL in FKM Flasher to receive updates:
https://raw.githubusercontent.com/Feinzer/fz_kernel_data/master/ota/release.json
Thanks to
CyanogenMod / LineageOS
Ak
Nikhil18
DeadlyIndian
ArtxDev
Sultanxda
franciscofranco
ZaneZam
Lord Boeffla
flar2
Adithya R.
Tomoms
Idprophecy
All of this is possible ONLY because of the work of these people and teams. Thank you.
XDA:DevDB Information
Fz Kernel, Kernel for the OnePlus One
Contributors
Feinzer, LineageOS, AK, Nikhil18, DeadlyIndian, ArtxDev, Sultanxda, franciscofranco, Lord Boeffla, ZaneZam, flar2, Adithya R., ab123321, Tomoms, Idprophecy
Source Code: https://github.com/Feinzer/fz_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Stable
Created 2019-05-23
Last Updated 2020-01-15
Reserved
Changelog:
Fz v4.3:
Removed CPUQuiet Hotplug driver.
Added Intelli Hotplug driver.
Updated installer zip to anykernel3.
Added FKM OTA Support
Fz v4.2:
Added ZRAM (Disabled by default)
Removed Maple I/O Scheduler due to reboots caused by it.
Back to good ol' zzmoove default setup.
Fz v4.1:
Added back features and optimizations lost in the LineageOS rebase process.
Added some new settings on init to actually use the features this kernel has.
Fz v4:
Complete rebase to bacon's current LineageOS kernel.
Initial release for Android 10.
Fz v3.1 HOTFIX:
Fixed bootloop on ROMs built with AOSP/POSP trees.
Fz v3:
Added NVIDIA's CPUQuiet driver.
Disabled mpdecision by default.
Added Dynamic Interactive governor.
Added ElementalX governor.
Added Maple I/O Scheduler.
Added general optimizations and improvements.
Reserved
I'll give a try.
Currently over LOS 16 20190523 + magisk 19.2 no issue after flashing.
I'll try common things on few days:
1. Gps UNTESTED
2. Bluetooth OK (test with 2 bluetooth headphone and 1 bluetooth sound speaker)
3. Wifi hotspot OK (unlike FC kernel r57)
4. Battery life UNTESTED
5. More?
Been using it for weeks. It's good. Definitely worth trying.
Using it with TugaPower and I'm very satisfied. [emoji106] for good work.
Sent from my A0001 using Tapatalk
This kernel work great on TugaPower P18. Thank you for your great work. All the best.
Sent from my OnePlus One using XDA Labs
Is there any changelog?
kakawait said:
Is there any changelog?
Click to expand...
Click to collapse
Yes, there is but I don't really wanna edit the OP every time I release a new version unless there are like, nice big changes to edit the feature list, I might post changelogs once I drop a new version on the reserved posts or something.
Yo Feinzer! i see your bacon is still alive...
i can't really use telegram rn that's why I've been missing , been trying to revive my damn phone...
(figure out who i am , isn't that hard )
Edit: Glad to see you doing some work hehe
Initial impression of this kernel seems good. The phone is a bit more responsive now.
Using official lineage OS 16.
doesn't work on POSP v2.2 - bacon
meiax93 said:
This kernel work great on TugaPower P18. Thank you for your great work. All the best.
Sent from my OnePlus One using XDA Labs
Click to expand...
Click to collapse
What settings you use on hotplug?
Enviado do meu A0001 através do Tapatalk
VitorMSA said:
What settings you use on hotplug?
Enviado do meu A0001 através do Tapatalk
Click to expand...
Click to collapse
i just flash that kernel and forget. i not tweak any settings. xD
Does.'t boot on AOSP rom also
portfolio said:
Does.'t boot on AOSP rom also
Click to expand...
Click to collapse
You aren't giving details about the problem, which ROM are you using? any mods or something?
RenzozO said:
doesn't work on POSP v2.2 - bacon
Click to expand...
Click to collapse
portfolio said:
Does.'t boot on AOSP rom also
Click to expand...
Click to collapse
This issue has been fixed now with the v3.1 release.
Next time tho, try to tell me more information about the situation because I cannot address an issue that I have no information of, thank you
yes, v3. 1 is booting now with arrowOS, thanks!
Is this kernel support zram with lz4?
Or will it be supported?
SoarStarlight said:
Is this kernel support zram with lz4?
Or will it be supported?
Click to expand...
Click to collapse
Will look into it
Edit: nvm it does, I forgot about it.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Criterion is a highly customizable fork of @z3DD3r's LineageOS kernel. It features various popular cpu governors, hotplugs, I/O schedulers, kcal color control, doubletap2wake, sweep2wake etc and is built with Linaro GCC 7.5.0 (O3 and hard-float optimizations enabled). Make sure the latest version of Magisk is installed.
Download:
https://github.com/Slmnj/hammerhead/releases
Source:
https://github.com/Slmnj/hammerhead
Contributors:
@z3DD3r, @franciscofranco, @flar2, @osm0sis, @topjohnwu, @eng.stk ...
Reserved
Boot fine on crdroid 10 ,seems working fine.
Congratulations
$lmnj said:
Criterion-pr1
The kernel works completely fine on LOS 17.1. But I couldn't find time to try it on other Android 10 based ROMs. This is a pre-release for anyone interested in testing the kernel. Give it a shot and share your experience.
Click to expand...
Click to collapse
Congratulations, you have done such a wonderful incredible job :good: :victory:.
If you don’t mind, could you please sent the final file "FKE_v2.1.0.zip" to me ? I am trying to install Magisk v20.3, but the attached file "FKE_v2.0.0.zip" does not work pretty well. It's just useful for my phone within Pie rom. Thanks so much :highfive:
Criterion-r1
Pushed the first stable release with a couple of changes. Stay tuned for more updates with added features and improvements.
Changelog:
- Initial release
- Removed Ondemand governor
- Wakelocks aren't blocked by default
- Few fixes for devices that are not rooted
- Merged latest AnyKernel3 patches
Download
$lmnj said:
Criterion-r1
Pushed the first stable release with a couple of changes. Stay tuned for more updates with added features and improvements.
Changelog:
- Initial release
- Removed Ondemand governor
- Wakelocks aren't blocked by default
- Few fixes for devices that are not rooted
- Merged latest AnyKernel3 patches
----------------------------------------------------------------------------------------------------------------------------------------------
I just need it within two main functions, such as “doubletap2wake” and “USB Fast Charge”.
Could you please add in it
Click to expand...
Click to collapse
Fast Charge,please
Criterion-r2
Added USB Fast Charge up to 900mA. This feature is disabled by default. If you have root access, you can enable this feature using a Kernel Manager.
Download
Single-Core Score:1014
Multi-Core Score:2783
Geekbench 4.4.2
Criterion-r3
This is an important release even though there aren't any new features added. I've updated the toolchain to Linaro GCC 4.9.4 and also merged the latest AnyKernel3 patches.
Download
Criterion-r4
The Interactive governor underwent a major overhaul. It is now based on the interactive governor from Franco Kernel. I've made some slight improvements to the other CPU governors as well.
Download
Terrific Job
$lmnj said:
Criterion-r4
The Interactive governor underwent a major overhaul. It is now based on the interactive governor from Franco Kernel. I've made some slight improvements to the other CPU governors as well.
Click to expand...
Click to collapse
Good :good:
Thank you :highfive:
Not bad!
Criterion-r5
Added Franco's sound control interface
Disabled thermal-engine service (thanks to @z3DD3r)
Updated to latest AnyKernel3
Download
Criterion-r6
Added Alucard governor
Upgraded SIO scheduler to SIOPlus
Download
Finally a new kernel for Nexus 5 with Android (even 10). I will test it as soon as I get home. Nexus 5 is a test bench for me now There are very few kernels out there with proper features (if none). Please continue working on it.
Criterion-r7
Added Electroactive and Lionheart governors
Added Simple GPU governor by Faux
Changed default governor to Alucard
Updated to latest AnyKernel3
Download
Criterion-r8
Added Power-efficient workqueues (enabled by default)
Download
Can you please keep previous versions as well? I did not get a chance to download the previous ones.
Optimus Drunk Kernel for POCO X3 (NFC)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Based on Stormbreaker kernel
- Built with latest AOSP clang
- AnyKernel3
- Wireguard support
- Wakelock blocker
- Anxiety, Sio, Fiops, Zen & Maple I/O Schedulers
- MIUI is not supported
Download:
Github
FKM Updater
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or Orangefox and reboot, that's all
Support Group:
Telegram
XDA:DevDB Information
Optimus Drunk Kernel for POCO X3, Kernel for the Xiaomi Poco X3
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Surya
Reserved
Reserved again
@GtrCraft , its support ip6tables nat ? just like samsung stock kernel ?
Yeah! First kernel thread.
Thanks @GtrCraft
Funziona anche su miui
Funziona anche su miui ??
Very Great!!! For Beryllium and now for Surya too Great Job!
With this kernel + custom roms do we still have 5Ghz wifi bug?
.
Can be flashed on MIUI stock ROM? If yes, what are instructions for the flash?
Wow. Appreciate the work you put into this. I'll wait for feedback before I try this.
v11.1 is here:
Release Optimus Drunk Surya v11.1 · GZR-Kernels/Optimus_Drunk_Surya
Updated to 4.14.210 Added multiple I/O schedulers, boeffla wakelock blocker, klapse & kcal support Set Maple as default I/O Scheduler Set lz4 as default comp algorithm Enabled some powersaving stu...
github.com
Changelog:
Updated to 4.14.210
Added multiple I/O schedulers, boeffla wakelock blocker, klapse & kcal support
Set Maple as default I/O Scheduler
Set lz4 as default comp algorithm
Enabled some powersaving stuff (quicker deepsleep, wakelock timeout etc.)
Alin45 said:
Can be flashed on MIUI stock ROM? If yes, what are instructions for the flash?
Click to expand...
Click to collapse
Read OP
aLexzkter said:
With this kernel + custom roms do we still have 5Ghz wifi bug?
Click to expand...
Click to collapse
I have 5 ghz wifi, so what's the problem?
Presumably he means the very poor WiFi signal strength which is seen across all custom roms for this device when compared with stock.
I too would love for this issue to be fixed. I can barely use WiFi out with the room that my router is in!
Would be great if this kernel improved the signal strength.
Upon testing, the kernel only works for devices on the latest firmware.
@Revontheus well, I am on 12.0.3 and kernel is working perfectly
edit: just tested latest version (1.1) and indeed is not booting on 12.0.3 , just frozen on POCO logo...
Oh! This is surya's first custom kernel!! Thanks you