[TWRP 3.0] Recovery for Micromax A102 - Android Q&A, Help & Troubleshooting

Hello guys,
So are you all using that Old CWM or Philz recovery?
You might have searched TWRP for Micromax A102 But didn't get
So here is the Solution.
Notes :-
i)This Recovery is only for Micromax A102. Do not flash it on any other Devices
ii)Your android should be rooted. [root with kingroot from below.
iii)I am not responsible for any brickage of your android
[Recovery is fine, Don't worry]
Download Links :-
TWRP for Micromax A102
How To Flash TWRP Recovery:-
1.Steps to flash TWRP Recovery with Rasher :-
i) Download 'Rasher' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Rasher App.
v) Select 'Recovery from Storage'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
2.Steps to flash TWRP Recovery with Mobileuncle Tools :-
i) Download 'Mobileuncle Tools' app from here[/URL].
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Mobileuncle Tools App.
v) Select 'Recovery Update'.
vi) Now select the TWRP recovery you have downloaded and install it.
vii) Done!!
3.Steps to flash TWRP Recovery with Flashify:-
i) Download 'Flashify' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Flashify App.
v) Select 'Recovery image'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
How To Enter in Recovery:-
i)Switch off your Android Phone
ii)Press and hold Volume Up and Power Button Together
iii)Done!!
Hit Thanks if you like it.:good:

download links
Editer's Pride said:
Hello guys,
So are you all using that Old CWM or Philz recovery?
You might have searched TWRP for Micromax A102 But didn't get
So here is the Solution.
Notes :-
i)This Recovery is only for Micromax A102. Do not flash it on any other Devices
ii)Your android should be rooted. [root with kingroot from below.
iii)I am not responsible for any brickage of your android
[Recovery is fine, Don't worry]
Download Links :-
TWRP for Micromax A102
How To Flash TWRP Recovery:-
1.Steps to flash TWRP Recovery with Rasher :-
i) Download 'Rasher' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Rasher App.
v) Select 'Recovery from Storage'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
2.Steps to flash TWRP Recovery with Mobileuncle Tools :-
i) Download 'Mobileuncle Tools' app from here[/URL].
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Mobileuncle Tools App.
v) Select 'Recovery Update'.
vi) Now select the TWRP recovery you have downloaded and install it.
vii) Done!!
3.Steps to flash TWRP Recovery with Flashify:-
i) Download 'Flashify' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Flashify App.
v) Select 'Recovery image'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
How To Enter in Recovery:-
i)Switch off your Android Phone
ii)Press and hold Volume Up and Power Button Together
iii)Done!!
Hit Thanks if you like it.:good:
Click to expand...
Click to collapse
Hi
I would like to inform you that i can't find any download links
So please send me download links through mail
My email id is
[email protected]
send me TWRP 3.0 links for micromax A102 (doodle 3)

Please send me link twrp for micromax canvas A102 doodle 3 android 4.4.2

Related

Micromax canvas doodle 3 root and cwm recovery

HOW TO ROOT MICROMAX CANVAS DOODLE 3 A102
Instructions :-
* Download & Install Framaroot.apk (latest version) and open it.
Link :-
http://forum.xda-developers.com/show....php?t=2130276
* Choose Install SuperSU
* Then Click on "Boromir".
* It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
* After Reboot You Will Find SuperSu Application In The App Drawer.
FOR UNROOTING SIMPLY SELECT UNROOT FROM FRAMAROOT
------------------------------------
************************************
2.) INSTRUCTIONS FOR STOCK RECOVERY MODE :-
* power off
* press volume up + power botton together until micromax boot logo appears...
* you are on stock recovery
NOTE :
* IN RECOVERY USE VOLUME UP - DOWN FOR SCROLLING UP - DOWN
* FOR SELECTING ANY OPTION FIRST GO ON THAT OPTION AND LONG PRESS VOLUME UP BUTTON AT THAT OPTION
* IF YOU REBOOT FROM RECOVERY THEN YOUR PHONE SCREEN IS STARTING BLINKING SO REBOOT IT AGAIN FROM PHONE MENU (Long press power button and select reboot)
Rooting void your warranty but you can get it back by unrooting (I think)
3.)CLOCKWORDMOD RECOVERY (CWM) ONMICROMAX CANVAS DOODLE 3 A102
:-
* Root your phone with framaroot (http://forum.xda-developers.com/atta...3&d=1380569629)
* Install MTKdroidTools 2.4.8 from here (http://dfiles.eu/files/fmnok7ke7)
Download and run the MTKdroidTools.exe (Note enable usb debugging on your phone and click on root from mtkdroidtool than grant root access from your phone)
Then backup your existing rom by clicking on root ,backup,recovery tab and backup. this will back up your entire stock rom in case you want to revert.
* For CWM install click on Recovery and boot and choose the option "To choose the boot.img file" and then select your stock boot.img file which u backed up. Next it will patch it with CWM autoinstaller just click yes and ok and the device will reboot. Woola you now have a working CWM to proceed.
-----------------------------------------------------------------------------------------------IN SHORT -------------------------------------------------------------------------------------------------
STEP- 1 CLICK ROOT BUTTON
STEP- 2 SEE GREEN SIGN ON BOTTOM LEFT SIDE
STEP- 3 BACKUP ROM
STEP- 4 CHOOSE BOOT.IMG AND CLICK RECOVERY AND BOOT
STEP- 5 SELECT BOOT.IMG FROM YOUR BACKUP
STEP- 6 CLICK YES
STEP- 7 CLICK YES
STEP- 8 CLICK YES
----------REBOOT-----------------
YOU ARE ON CWM RECOVERY
DONT FORGET TO SAY THANKS
darkridersss said:
HOW TO ROOT MICROMAX CANVAS DOODLE 3 A102
Instructions :-
* Download & Install Framaroot.apk (latest version) and open it.
Link :-
http://forum.xda-developers.com/show....php?t=2130276
* Choose Install SuperSU
* Then Click on "Boromir".
* It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
* After Reboot You Will Find SuperSu Application In The App Drawer.
FOR UNROOTING SIMPLY SELECT UNROOT FROM FRAMAROOT
------------------------------------
************************************
2.) INSTRUCTIONS FOR STOCK RECOVERY MODE :-
* power off
* press volume up + power botton together until micromax boot logo appears...
* you are on stock recovery
NOTE :
* IN RECOVERY USE VOLUME UP - DOWN FOR SCROLLING UP - DOWN
* FOR SELECTING ANY OPTION FIRST GO ON THAT OPTION AND LONG PRESS VOLUME UP BUTTON AT THAT OPTION
* IF YOU REBOOT FROM RECOVERY THEN YOUR PHONE SCREEN IS STARTING BLINKING SO REBOOT IT AGAIN FROM PHONE MENU (Long press power button and select reboot)
Rooting void your warranty but you can get it back by unrooting (I think)
3.)CLOCKWORDMOD RECOVERY (CWM) ONMICROMAX CANVAS DOODLE 3 A102
:-
* Root your phone with framaroot (http://forum.xda-developers.com/atta...3&d=1380569629)
* Install MTKdroidTools 2.4.8 from here (http://dfiles.eu/files/fmnok7ke7)
Download and run the MTKdroidTools.exe (Note enable usb debugging on your phone and click on root from mtkdroidtool than grant root access from your phone)
Then backup your existing rom by clicking on root ,backup,recovery tab and backup. this will back up your entire stock rom in case you want to revert.
* For CWM install click on Recovery and boot and choose the option "To choose the boot.img file" and then select your stock boot.img file which u backed up. Next it will patch it with CWM autoinstaller just click yes and ok and the device will reboot. Woola you now have a working CWM to proceed.
-----------------------------------------------------------------------------------------------IN SHORT -------------------------------------------------------------------------------------------------
STEP- 1 CLICK ROOT BUTTON
STEP- 2 SEE GREEN SIGN ON BOTTOM LEFT SIDE
STEP- 3 BACKUP ROM
STEP- 4 CHOOSE BOOT.IMG AND CLICK RECOVERY AND BOOT
STEP- 5 SELECT BOOT.IMG FROM YOUR BACKUP
STEP- 6 CLICK YES
STEP- 7 CLICK YES
STEP- 8 CLICK YES
----------REBOOT-----------------
YOU ARE ON CWM RECOVERY
DONT FORGET TO SAY THANKS
Click to expand...
Click to collapse
post some screenshots brother
The recovery created using mtkdroidtools is how much stable:what:
Sent from my Micromax A102 using XDA Premium 4 mobile app
Recovery mod doodle 3 a102
I have already rooted ....after I wanted to install ROM..& I tried flashing clockwork mode which is not available for doodle 3 andafter flashing it I wasn't able to open recovery mode in doodle 3(I used a111 IMG file to flash using mtk)plz help...& I am not able to find IMG file for doodle 3
Install cwm recovery for doodle 3 using mtkdroid tools
It works
Tested by me..
Sent from my Micromax A102 using XDA Premium 4 mobile app
Can you suggest any rom for this phone???
Sent from my C6902 using XDA Free mobile app
My PC is damaged. Plzzzz anyone post how to install cwm recovery without PC
wanna stock recovery
How to get back to stock recovery.
can anyone plz provide me stock recovery.img
what about vulnerabilities error, i am confused with this error?
I tried rooting my micromax canvas doodle a102 many times, with framaroot, z4root and towel root method, none worked for me. Frama root is giving me an error > please check your phone vulnerabilities. I have checked with xray testing and all my softwares on my phone are not vulnerable, that means they are safe. How can i proceed with rooting now, please give me a detailed advice.
can anyone give recovery.img file of cwm recvry for doodle 3 kitkat 8gb rom
sir I want custom recovery doodle 4 q391 succsseer of doodle 3
bittoo143 said:
I tried rooting my micromax canvas doodle a102 many times, with framaroot, z4root and towel root method, none worked for me. Frama root is giving me an error > please check your phone vulnerabilities. I have checked with xray testing and all my softwares on my phone are not vulnerable, that means they are safe. How can i proceed with rooting now, please give me a detailed advice.
Click to expand...
Click to collapse
I want cwm as soon as possible... I want cwm q391 doodle 4
Unfortunately system android os was removed . How to fix it

[Q] Install CWM without USB, just sdcard access

I'm from a small town in Africa, where getting a proper USB cord will take me months.
So i have a Samsung Galaxy GT-P1000. (2.3.3)
I want to have Jelly Bean on it.
It doesn't have have clockworkmode.
How do i root the device, install clockwork mode, and do the update to Jelly Bean without a USB cable,
I can send files via Airdroid.
I have googled and gooooogled, with no success,
The only solutions i get require me to have USB cable.
The device is not rooted, with no CWM, but i have internet access and i can download files.
Easy way
Root your device by installing framaroot app
then
Download Flashify - Google Play [ Free ]
2. Download your favorite custom recovery .img file for your device
CWM ( Clockworkmod )
TWRP (Team Win Recovery Project)
3. Open Flashify app... Accept disclaimer and Grant permission on popup
4. In FLASH tab tap on Recovery Image and browse / select the downloaded recovery .img file using flashify explorer.
Now the app will popup a confirm Flash recovery? dialog.
6. Finally Tap on Yup! and wait.
That's it....After successful installation it will popup a Flash Complete dialog.....Choose Reboot now if you wish to boot into recovery or Exit app.

Xolo q600s cwm recovery!!!

Hello guys today i am going to present you the cwm recovery image for xolo q600s.
REMEMBER flashing wrong file or not doing in proper manner can lead to bootloop.
So do it on your own risk.
STEPS:
1) download this image file from here :
"tinyurl.com/ma6vrwm"
2)download flashify (thnks to cgollner for the tool) from google playstore
"tinyurl.com/lurys74"
3) open flashify(provide it with root permision) and click on 'recovery image' and search for the downloaded image 'xolo q600s cwm recovery image. img'
4) click flash to flash the image.
NOTE:
Disable xolo secure before flashing the image or booting into recovery else yiu might fall into a bootloop and secondly do it at your own risk!
if i hv helped you give a thumbs up!
xolo q600s not starting
after selecting 'xolo q600s cwm recovery image. img' using flashify phone (xolo q600s) is not starting..only xolo logo shown..what to do plz help me

[NOOB-GUIDE] How To Flash Custom Recovery In XOLO A600

HOW TO FLASH CUSTOM RECOVERY IN XOLO A600
Hey Guys!
*Rooted Your A600?
*Want To Flash Custom Recovery?
Than You Are At Right Place!!
Here I will Tell You How To Flash Custom Recovery In Your A600!
Let's get started!
PROCESS:-
1. First Of All Download Any Custom Recovery That You Want To Flash! But It Should Be According To Your Firmware Or Build Number!
CLICK HERE TO DOWNLOAD RECOVERIES FOR XOLO A600
2. Than Extract Zip Of Recovery (If In Zip File!) If Not Than Skip This Step!
3. Now Place recovery.img In SD Card But Not In Any Folder.
4. Now Download "Rashr" From Play Store!
5. Open Rashr.
6. Give Root Permission.
7. Than Click On "Update Recovery From Storage"
8. Now Navigate To recovery.img & Click On It! Yes or No Pop-up will come! Tap On Yes!
9. Again A Yes or No Pop-up Come! Tap On Yes! Now It Will Reboot You Into New Recovery! Which You Flashed!
Hurrraaaahhh! You Have Successfully Flash A Recovery!
Now You Can Make Backup Of Your ROM! And Can Flash Anything That You Want!
If You Found This Useful Than Please Hit Thanks! It Will Not Cost You Anything But It Will Motivate Me A Lot!
"Thanks" ​

How To Root and install twrp recovery in samsung galaxy star pro gt-s7262.

Hey if have to root and install twrp recovery in Samsung galaxy star pro GT-S7262
With this method you can easily root and enter into the recovery
Follow These Steps:
Download Link: see the reply to this post below.
EXTRACT THE DOWNLOADED ZIP FILE.
YOU GET THESE FILES:
1.Odin3_v3.10.7(Flashing Tool For Windows)
2.GT-S7262_4.1.2.tar
3.twrp-s7262.tar.md5
4.SuperSU.zip
5.quickboot.apk
6.Samsung-Usb-Driver-v1.5.49.0.exe
Steps to root and Install Twrp Recovery on GT-S7262
1.install samsung usb driver and open odin tool and click on AP and browse for downloaded file-GT-S7262_4.1.2.tar and click open.
2.now reboot your device in download mode and connect to pc.
3.odin will show added.
4.now click on start.
5.when it shows green pass then disconnect you phone and reboot.
Now your phone is rooted
6.rebot your phone once again in download mode and connect to pc and flash twrp-s7262.tar.md5 as AP (make sure to untick Auto Reboot in odin).
7.after its completed reboot and install quickboot,apk after install open quickboot app and grant superuser access.
8.now tap on recovery option and it will take you to the twrp recovery .
If you have to get supersu (recomended) then flash SuperSU.zip in twrp recovery .
PLEASE HIT THANKS IF IT HELPED!​
DOWNLOAD LINK:http://usercloud.net/3m7
Thanks

Categories

Resources