I'm sorry that probably many have asked the same quesiton, but I'm desperate. The case is I followed the guide on rootyourmobile dot com how-to-unlock-bootloader-install-twrp-and-root-huawei-honor-7 to unlock, install twrp and root. All went good until installing SuperSu through TWRP, where the installation process got cancelled and I'm now stuck at honor-logo. I can still access twrp(it's in chinese though), by holding volum up + power, but I dont manage to access fastboot mode.
I realize this is a way to go. I guess my problem is not getting into fastboot, I also tried all options under Reboot in TWRP. Should I let the battery run out? Any help is much appreciated. Hope my phone is not total garbage...
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
mosoo said:
I'm sorry that probably many have asked the same quesiton, but I'm desperate. The case is I followed the guide on rootyourmobile dot com how-to-unlock-bootloader-install-twrp-and-root-huawei-honor-7 to unlock, install twrp and root. All went good until installing SuperSu through TWRP, where the installation process got cancelled and I'm now stuck at honor-logo. I can still access twrp(it's in chinese though), by holding volum up + power, but I dont manage to access fastboot mode.
I realize this is a way to go. I guess my problem is not getting into fastboot, I also tried all options under Reboot in TWRP. Should I let the battery run out? Any help is much appreciated. Hope my phone is not total garbage...
Click to expand...
Click to collapse
No need to open a separate threat. Check your post.
Why are you quoting my post and starting a new thread with it?
Related
So I was following a tutorial for installing CWM recovery on my atrix and it had me:
"Using Root Explorer or some other type of file explorer, navigate to /system/etc and delete the file called install_recovery.sh. This will prevent your phone from automatically reinstalling the stock Android Recovery".
I did this without making a backup of the file (foolish) and now my phone cannot boot into recovery at all. When I select Boot into Recovery, I get the error - failed to boot 2. This is a major problem because I cannot even factory restore my atrix, Even a hardware reset failed.
Basically if anyone has any ideas on a solution, they would be greatly appreciated. Or perhaps someone could post their install_recovery.sh file so I can replace it.
Thank you!
donnelpa said:
So I was following a tutorial for installing CWM recovery on my atrix and it had me:
"Using Root Explorer or some other type of file explorer, navigate to /system/etc and delete the file called install_recovery.sh. This will prevent your phone from automatically reinstalling the stock Android Recovery".
I did this without making a backup of the file (foolish) and now my phone cannot boot into recovery at all. When I select Boot into Recovery, I get the error - failed to boot 2. This is a major problem because I cannot even factory restore my atrix, Even a hardware reset failed.
Basically if anyone has any ideas on a solution, they would be greatly appreciated. Or perhaps someone could post their install_recovery.sh file so I can replace it.
Thank you!
Click to expand...
Click to collapse
1. Unlock your bootloader (get into RSD mode and flash pudding .sbf)
2. Flash CWM again
3. Try to get back into recovery
Ah! I thought gingerbread unlocked my bootloader. that's definitely my problem. Thanks for the tip. will try now.
If your phone is already unlocked, follow this steps.
In order for you to follow these steps, you have to have your fastboot program already downloaded.
1. Press the power button while press and hold the Vol Down button.
2. When you get fastboot on your screen, press the Vol Up button.
3. You will see ''Starting Fastboot Protocol support" on your screen.
4. Connect you USB cable
5. Issue "fastboot.exe devices" and you will see some device information.This means your device is properly recognized.
6. Issue "fastboot flash recovery [your recovery image file name]"
7, Issue "fastboot reboot" if step #6 is OK and your device will reboot, but quickly press and hold Vol Down button again.
8. You will see Fastboot again on your screen, then use Vol Down key till you see "Andrid Recovery" and then press "Vol Up"
9. If everything's fine, this will get you to the recovery.
Thanks
I finally unlocked my bootloader and now I have an ics cm9 rom on it! So much better.
I tried to root my me302kl by following the first post described in this thread, but it seems I've bricked my tablet
http://forum.xda-developers.com/showthread.php?t=2601837
I have the LTE version, unlocked the bootloader using the apk from Asus, and followed the fastboot method in the first post, and now I'm stuck at the Asus logo on startup. I'm trying to factory reset by using the update download from the Asus website, but when i try
fastboot erase cache
fastboot erase system
fastboot flash update US_ME302C-V4.7.3-0-ota-user.zip
it fails with this:
writing 'update'...
FAILED (remote: partition table doesn't exist)
Then I tried following perpe's advice but both methods did not work
Download the update zip for your device and sku from ASUS. Unpack it once, there should be a second zip, try to flash it with
fastboot update name-of-your.zip
if this doesn't wotk, then copy the update zip to an external sd card. Your sd card should be formated in far32. Place the card into the tablets sd card. Press Volume UP + Power to boot it into the bootloader, it should flash it automatically, if not look if yor bootloader has a menu entry "sd download..." select it with the volume keys and power.
Click to expand...
Click to collapse
When booting into recovery mode, I get the dead android robot icon, regardless of whether the .zip file is on the SD card or not. I've also tried making a system.img file out of the system folder from the extracted zip file and flashing that with fastboot flash system system.img and fastboot flash boot boot.img, but that didn't work either.
Any kind soul have advice on how to make use of the official Asus OTA .zip file, or perhaps be able to supply some .img backups for me to make use of?
EDIT
Found out that to get the recovery menu to show up, you have to hold the power button and press volume up. I thought that the menu would show up automatically so I got confused. ADB sideloaded the Asus OTA .zip and everything is back to normal
Hello
How to flash oryginal soft on this tablet. Can you help with this ?
I tried SDK and wiped all system but now i cannot flash the system. How should i do it ?
I have firmware fros ASUS page and now what?
I tried fastboot flash update... but i have measege that unknown partition and cannot determinate image file name. What im doing wrong?
Thanks!
Lenino83 said:
Hello
How to flash oryginal soft on this tablet. Can you help with this ?
I tried SDK and wiped all system but now i cannot flash the system. How should i do it ?
I have firmware fros ASUS page and now what?
I tried fastboot flash update... but i have measege that unknown partition and cannot determinate image file name. What im doing wrong?
Thanks!
Click to expand...
Click to collapse
download the OTA zip from the asus website
unzip once, you should have another zip
power on the tablet while holding volume up to boot into recovery mode
after the android robot shows up, hold volume up and press the power button to get the recovery menu to show
install the zip using adb sideload
using adb sideload will differ depending on what OS you're using. you can google to find out more specific instructions for that because it's a little more work to get it for windows. for OSX if you have homebrew, you can just 'brew install android' and it will install all the android tools for you.
once you have adb installed, in the terminal type 'adb sideload pathname_of_zip.zip' and it will restore your device to factory settings
I had the same problem and your trick saved me from sending it back. I am not sure if i would have send it back as I have yet to brick something since I am playing with android back in the days of Viewsonic gtablet. We are stuck with 4.2.
Sent from my T0LTE using Tapatalk
help
tkuichooseyou said:
Found out that to get the recovery menu to show up, you have to hold the power button and press volume up. I thought that the menu would show up automatically so I got confused. ADB sideloaded the Asus OTA .zip and everything is back to normal
Click to expand...
Click to collapse
hello
got like the same problem.. dead robot, no boot, in recovery does not want to update from ota file.
Can u explain please how to ADB sideload ota.zip?
What I need, drivers and step by step?
I tried but I get no device in adb
Thank you:crying:
ionratiu2000 said:
hello
got like the same problem.. dead robot, no boot, in recovery does not want to update from ota file.
Can u explain please how to ADB sideload ota.zip?
What I need, drivers and step by step?
I tried but I get no device in adb
Thank you:crying:
Click to expand...
Click to collapse
You have to download adb or android sdk, or google how to install adb. Once you have installed the adb, hold the power button, and either Volume UP or down to put tablet into bootlfash recovery mode. Once you have it in recovery mode, push volume up or down to get into true recovery mode.
There you would see adb sideload.
Download US or WWW files from Asus website, and unzip the file into ADB directory or whatever path. then type adb sideload name of the file.
Please read the 1st post by OP on this thread twice or three times, and it tells you how to get your tablet back from brink.
back
rob_z11 said:
You have to download adb or android sdk, or google how to install adb. Once you have installed the adb, hold the power button, and either Volume UP or down to put tablet into bootlfash recovery mode. Once you have it in recovery mode, push volume up or down to get into true recovery mode.
There you would see adb sideload.
Download US or WWW files from Asus website, and unzip the file into ADB directory or whatever path. then type adb sideload name of the file.
Please read the 1st post by OP on this thread twice or three times, and it tells you how to get your tablet back from brink.
Click to expand...
Click to collapse
Got it. Done! the tablet is running again, but I encounter another issue
I have no permission to write internal sd.
I cant touch internal, some apps that require writing don't work (play store, camera, etc) I cant root, unlock or do anything that require w permissions.
Any way to fix that?
Or I have to wait for a CWM and rom image ?
ionratiu2000 said:
Got it. Done! the tablet is running again, but I encounter another issue
I have no permission to write internal sd.
I cant touch internal, some apps that require writing don't work (play store, camera, etc) I cant root, unlock or do anything that require w permissions.
Any way to fix that?
Or I have to wait for a CWM and rom image ?
Click to expand...
Click to collapse
You can download king's root or something which is a window app, and it does give your tablet root. I am not exactly sure about the name, but would let you know once I have access to my laptop.
Sent from my T0LTE using Tapatalk
ASUS MEMO PAD FHD10 ME302KL frozen logo screen
I have problem with my asus memo pad 10. It just shows asus logo startup screen and nothing more and it have no reaction with anything I do.
Please help!
I can't boot into recovery mode, but there is no problem to boot into fastboot mode!
Could anyone provide stock recovery file or link? Then I can flash recovery and do the adb sideload.
Thanks!!
hello all
i spent last few hours looking for solution to how to flash Stock Rom to my YB1-X90F and i found steps here and there and finally i got it. so i gathered all the steps in one thread to help whoever want to flush back to stock or downgrade from newer version for any reason.
This will erase all user data.
1. do it on your own risk, I'm not responsible for any damage to your devise.
2. Unlco your bootloader here is the steps by earthCallingAngela ----->>> Here
3. if you having issue to connect your drive to your computer while on bootloader you can install Intel driver, its worked for me, ----> Here
4. now install Intel Phone Flash Tool, i think it will install drivers as well, download it from here
5. Download Yoga book YB1-X90F Stock Rom Uploaded by Flippy498 from here
6. open Intel Phone Flash Tool and boot your phone on bootloader by Vol Up + Power, you should see the tool detect your Tablet.
7. on intel tool click on brows and located the Rom, wait for the tool to unzip it,
8. do not change anything just click on Flush and wait for it, on the middle of the process the tablet will ask you if its ok to wipe user data choose yes
after that the tablet will reboot and finish the installations and power off itself, power it on and wait for it, its will take long time for first boot so do not power it off.
Halo keyboard will not work until you do these steps By vimalbhimani on here
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) a list of country codes will po up, browser the country code list, then chose country code US and click OK
e) Then device will reboot and update, you should be able to use halo Keyboard after that.
note: i have issue with TouchPl keep stopping, had to chose google instead of Lenovo to get it to work without error
if you want to update the system to latest version (7.0.1) you can just go to update and update it.
if you have something to add please do
Thank you all.
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Flippy498 said:
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Click to expand...
Click to collapse
Thanks Flippy for sharing the steps with us.
can i downgrade from Nougat to Marshmallow？
microbai said:
can i downgrade from Nougat to Marshmallow？
Click to expand...
Click to collapse
sorry for the delay, yes you can, just follow the steps.
ayad said:
hello all
i spent last few hours looking for solution to how to flash Stock Rom to my YB1-X90F and i found steps here and there and finally i got it. so i gathered all the steps in one thread to help whoever want to flush back to stock or downgrade from newer version for any reason.
This will erase all user data.
1. do it on your own risk, I'm not responsible for any damage to your devise.
2. Unlco your bootloader here is the steps by earthCallingAngela ----->>> Here
3. if you having issue to connect your drive to your computer while on bootloader you can install Intel driver, its worked for me, ----> Here
4. now install Intel Phone Flash Tool, i think it will install drivers as well, download it from here
5. Download Yoga book YB1-X90F Stock Rom Uploaded by Flippy498 from here
6. open Intel Phone Flash Tool and boot your phone on bootloader by Vol Up + Power, you should see the tool detect your Tablet.
7. on intel tool click on brows and located the Rom, wait for the tool to unzip it,
8. do not change anything just click on Flush and wait for it, on the middle of the process the tablet will ask you if its ok to wipe user data choose yes
after that the tablet will reboot and finish the installations and power off itself, power it on and wait for it, its will take long time for first boot so do not power it off.
Halo keyboard will not work until you do these steps By vimalbhimani on here
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) a list of country codes will po up, browser the country code list, then chose country code US and click OK
e) Then device will reboot and update, you should be able to use halo Keyboard after that.
note: i have issue with TouchPl keep stopping, had to chose google instead of Lenovo to get it to work without error
if you want to update the system to latest version (7.0.1) you can just go to update and update it.
if you have something to add please do
Thank you all.
Click to expand...
Click to collapse
I followed all of the steps and it says "Flash Failed (Fastboot) PLEASE HELP
Edit: I fixed the problem by simply rebooting it. I didn't think it would be that easy.
SameSame, but L-Version ... cannot find Stock ROM ...
Hi there,
I would like to downgrade 2 Tablets YB1-X90L (not F), this thread is onderful BUT I cannot find the STOCK ROM version for the L-Model (the one with LTE) ... can someone point me out as where to get it ? The background is that Nougat screwes up the playstore ... as discussed in many other threads and there is no -permanent- solution... Thank you!
pwallenb said:
Hi there,
I would like to downgrade 2 Tablets YB1-X90L (not F), this thread is onderful BUT I cannot find the STOCK ROM version for the L-Model (the one with LTE) ... can someone point me out as where to get it ? The background is that Nougat screwes up the playstore ... as discussed in many other threads and there is no -permanent- solution... Thank you!
Click to expand...
Click to collapse
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Could someone please help me with downgrading my YB1-X90L, it just refuses to boot at all after my nephews messed with it, I found the stock rom but I can't get some of the needed programs and drivers,
Flippy498 said:
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Click to expand...
Click to collapse
Hello
I made this all and my Yoga-Book runs on Android 6.0.1 . But is there a possibility to get an Android Build 7.1.1? Because I can't restore my Backup it seams it is corrupt and if I try to update im configuration-app its does anything but at the end its allways on 6.0.1.
It would be great if someone can helb me.
Best regards
Peter
borisattva said:
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Click to expand...
Click to collapse
sorry for replying to such an old post.
could you or anyone else please reupload a 6.x stock rom for the yb1 x90L? i just cant find any working link and am currently stuck with a device without properly working wlan. wlan keeps turning itself off after a few seconds after reboot and only restarting the whole device can turn it back on again... i hope a rollback can solve the issue...
phsma said:
sorry for replying to such an old post.
could you or anyone else please reupload a 6.x stock rom for the yb1 x90L? i just cant find any working link and am currently stuck with a device without properly working wlan. wlan keeps turning itself off after a few seconds after reboot and only restarting the whole device can turn it back on again... i hope a rollback can solve the issue...
Click to expand...
Click to collapse
looks like the original link is down, so i searched for the file name YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_otafull.zip and this came up:
YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_otafull.zip | Easy Firmware
easy-firmware.com
ive no idea if this is working or safe to use but its a start.
good luck
So my Android YB1-X90F was locking up when trying to boot, just stuck showing the Lenovo logo. Thinking I'm clever I stubbled across the boot menu if you start the device with the Volume Up held. From there I tried the Recovery Mode and did a Factory Reset. Then the tablet started up and shows the Green Andriod Bin Man, saysi Encrypting and promptly reboots. So one starts Googling and ends up here. Some very help information, thanks for that.
So I've got as far as installing all the drivers/Intel Phone tool/Android Suite etc. but I'm still stuck. The flash is locked. Is there another way to unlock this as I can't get into Android to allow the developer options as suggested in Step 2 of the opening post?
Trying the fastbook commands in post 2 also fail
Code:
FAILED (remote: Prohibited command in locked state.)
finished. total time: 0.170s
TIA
LOL @ me, of course the manual fastboot commands fail as that's precisely what the Phone Tool App trying when doing its magic.
galumph said:
So my Android YB1-X90F was locking up when trying to boot, just stuck showing the Lenovo logo. Thinking I'm clever I stubbled across the boot menu if you start the device with the Volume Up held. From there I tried the Recovery Mode and did a Factory Reset. Then the tablet started up and shows the Green Andriod Bin Man, saysi Encrypting and promptly reboots. So one starts Googling and ends up here. Some very help information, thanks for that.
So I've got as far as installing all the drivers/Intel Phone tool/Android Suite etc. but I'm still stuck. The flash is locked. Is there another way to unlock this as I can't get into Android to allow the developer options as suggested in Step 2 of the opening post?
Trying the fastbook commands in post 2 also fail
Code:
FAILED (remote: Prohibited command in locked state.)
finished. total time: 0.170s
TIA
LOL @ me, of course the manual fastboot commands fail as that's precisely what the Phone Tool App trying when doing its magic.
Click to expand...
Click to collapse
I'm in the same boat. I acquired a YB1-X90F but all it does is show the orange Lenovo splash screen, then a black screen.
So here I am reading threads. But I'm already at my first hurdle...since I can't boot into the OS and go into Developer Options to start the boot loader unlock process.
YB1-X90F No OS(?) - Flashing Help
TL;DR: Noob needs to stock flash a device that won't boot into OS. Here's how the recovery looks (without and interaction): Boot loader: Splash screen: I have acquired a YB1-X90F that just shows the orange Lenovo splash screen and or a...
forum.xda-developers.com
Solved. I ran 'flash_update_from_user.json
Just waiting for the battery to charge to 30% to hopefully enable the Halo Keyboard.
Here are the files needed in case other links void in the future: https://drive.google.com/drive/folders/1gD9FyA03GbLZ7ZcjkyMDlhVPs4_em2rY?usp=sharing
Edit: The Android N update bricks the device for some reason.
Brent.M said:
Solved. I ran 'flash_update_from_user.json
Just waiting for the battery to charge to 30% to hopefully enable the Halo Keyboard.
Here are the files needed in case other links void in the future: https://drive.google.com/drive/folders/1gD9FyA03GbLZ7ZcjkyMDlhVPs4_em2rY?usp=sharing
Edit: The Android N update bricks the device for some reason.
Click to expand...
Click to collapse
any ideea why my yoga book is not visible in fastboot?
i installed drivers and platform lite indicated in drive location.
currently my yoga sbows bootloader error 05 during booting
Thank you @Brent.M I have a booting Yoga Book again
borisattva said:
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Click to expand...
Click to collapse
The link is not work anymore, could you please share you firmware for x90L model ? thanks
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
I tried to root my phone using this guide, followed it down to the word and yet my phone's stuck in a bootloop. It keeps restarting to the Poco start screen.
Ive got the stock recovery, and for some odd reason fastboot commands work only in the "FASTBOOTD" screen and not the the "FASTBOOT" screen which you get from "adb reboot bootloader" command.
I try to shut it down and it boots up back again in the same screen and is stuck there.
Im clueless and I really dont know what to do. Some help would be greatly appreciated.
edit: I tried to use the stock recovery and wipe data. No progress.
I tried to connect the phone with the MIAssistant but the app doesnt recognise the device.
I tried using the MiFlash tool to flash the stock rom, it goes on infinitely. Im currently trying to use the SP Flash tool and MediaTek Bypass tool but I havnt got any progress yet.
I promise I'm never buying MediaTek devices ever again.
Careful with the Flash and Bypass tools, they can cause problems.
What can you achieve with the hardware buttons on the phone? Can you get it into recovery?
Fastbootd working but fastboot not sounds like a USB drivers problem - there are some driver options here.
aricooperdavis said:
Careful with the Flash and Bypass tools, they can cause problems.
What can you achieve with the hardware buttons on the phone? Can you get it into recovery?
Fastbootd working but fastboot not sounds like a USB drivers problem - there are some driver options here.
Click to expand...
Click to collapse
It was a driver issue, thanks for the link.
What I did to get out of the bootloop:
1. Download the latest Miui rom for your version, make sure it's the recovery version and not the fastboot one.
2. Press ALL the buttons, Vol+ Vol- and Power button to shut it down for a few seconds (assuming you can't switch it off as it keeps powering back up again).
3. After it's switched off, quickly press the power and vol- button until you see the FASTBOOT screen.
4. Connect with PC, make sure you have the proper drivers and have connected with the right USB port.
5. Download OrangeFox custom recovery. It is a unofficial custom recovery, so its stability is questionable. But it does the job here.
6. Copy the OrangeFox zip and the Miui rom file to your phone's SD card or any external storage which your phone can access.
7. In your PC, extract the OrangeFox zip folder in your platform-tools folder. (The folder where you run your cmd fastboot/adb commands)
8. Open up cmd, and enter the command:
fastboot flash boot recovery.img
9. Your phone should boot up to the OrangeFox recovery. If not switch the phone off (Step 2) and press power + vol+ button for booting up to the recovery.
10. Locate your OrangeFox zip installer file in the recovery and flash it.
11. Reboot to the recovery again.
12. Locate the Miui rom and flash that. Before swiping to flash the rom, there is a check box which says something like "flash OrangeFox once the rom has been flashed". If you want to keep OrangeFox as your recovery then check it, or else leave it unchecked. Flashing roms remove custom recoveries.
13. Your phone must reboot to miui.
NOTE: You can use fastboot commands to flash the rom but I'm not very familiar with fastboot commands (I actually forgot most of them). Hence I use the recovery method.
warhead1721972 said:
It was a driver issue, thanks for the link. Should I delete this post? It isnt much big of an issue imo.
Click to expand...
Click to collapse
Great, glad you got it sorted! No, leave it up, you never know someone might stumble across it and find it useful