HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes][TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
REMEMBER
Roms like Project Lucky, Noble Rom, and others can already have some of this codes, SO PAY ATTENTION on what you will do or what you are doing because im not responsable of your future problems or errors if you do something wrong so please first of all ask your developers or look in the "BUILD.PROP" if it already have the code you want put
Ok nice to find them all around on one place all do I don't agree with most of them.
Hire are some for you to try out.
#dalvik
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=150m
dalvik.vm.heapsize=261m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
Adjusted values by my self to fit this tin can based on this as a base:
https://01.org/android-ia/user-guides/android-memory-tuning-android-5.0-and-5.1
I deed go with initial devlik heap size of 16MB instead of 8 as 8 doesn't fit so it's increased almost instantly. I am still testing them my self but I have to say impressions are rather good in many arias from tasks witching to more tasks steady remaining in RAM. Less to none apps crashing & also far less lag in memory hungry apps. All this as this should actually initial save a pretty good amount of ram compared to initial reference settings. The positive effect on battery life remains to be seen but it certainly is positive. I am testing it on last official CM12.1.
You may also want to try:
debug.enabletr=1
It enables Tile based rendering. The tile based rendering is faster but it also needs more time for textures to be loaded so results don't have to be always positive (even in most cases they are). Tile based rendering on the other hand certainly also saves some power.
Even Adrenos aren't top of the pops in Tile based rendering (compared to MALI's & PowerVR where this is default rendering mode) it certainly helps.
Let me demonstrate in tied screanshot.
For rendering composition I use:
debug.composition.type=dyn
This is basically to let it choose by flags between GPU & CPU all do most things are GPU rendered this day's still saving some juice on those that are ment to be rendered on CPU is a good thing. It naturally goes with:
dev.pm.dyn_samplingrate=1
I find this surface flinger config best up to date:
#Surface flinger 1.0 2.0 4000
ro.fling.distance.coef=2.0
ro.fling.duration.coef=3.0
ro.max.fling_velocity=3000
It saves a lot on resources even compared to defaults not to mention over exaggerated other ones & yet it produces very smooth results.
Also remove the remark (#) on:
persist.sys.purgeable_assets=1
It does cost a bit of speed (rather not significant) but I still recommend it to be used in contrast to same page merging where performance hit is significant enough.
That's it in shortly, best regards.
Zola III, Thanks for the tip, i will edit the codes and put more
Hi,
There is a way to increase sound volume in s3 neo? It's way to low! Like editing some file or something... I am rooted but viper app doesn't install it's saying something about the busybox...
Mar Ian said:
Hi,
There is a way to increase sound volume in s3 neo? It's way to low! Like editing some file or something... I am rooted but viper app doesn't install it's saying something about the busybox...
Click to expand...
Click to collapse
Well honey install the busy box comands extension binary.
https://play.google.com/store/apps/details?id=stericson.busybox
(that is installer).
It is possible to manually adjust output levels with good root Explorer & text editor but I don't recommend you to do that as you are obviously a noob.
Anyway the file is located at root /system/etc/mixer_paths.xml
& your interest is only in the:
<!-- Play Scenario -->
Section.
Zola III said:
Well honey install the busy box comands extension binary.
https://play.google.com/store/apps/details?id=stericson.busybox
(that is installer).
It is possible to manually adjust output levels with good root Explorer & text editor but I don't recommend you to do that as you are obviously a noob.
Anyway the file is located at root /system/etc/mixer_paths.xml
& your interest is only in the:
<!-- Play Scenario -->
Section.
Click to expand...
Click to collapse
I had to modify something in the build prop file and now viper works but I don't think it increases the in call volume or overall volume. It just gives better headphone audio.
Anyway thanks man! :good:
Mar Ian said:
I had to modify something in the build prop file and now viper works but I don't think it increases the in call volume or overall volume. It just gives better headphone audio.
Anyway thanks man! :good:
Click to expand...
Click to collapse
LOL. When you install ViPER4Android it mods build.prop by it self disabling lo power (DSP) audio decoding. It's natural that it doesn't touch cellular radio layer (fm radio & calls), however all adjustments are in the mentioned omx file.
Thank you very much. I am trying all of these tweaks on my s5 running cm14 ROM and it looks like its running perfectly fine so far. I will test more and see what kind of improvements I get.
Thanks for combining all of these in a single thread. It just removed the need of any kind of performance or tweaking app.
How to apply this tweak? Do I just paste it into build.prop and then reboot? I have cm 12.1
Thank you for this thread.
Ciro said:
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes]
[TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
Click to expand...
Click to collapse
There is a code ro.config.tima umm will it be tima or time?
Ciro said:
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes]
[TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
Click to expand...
Click to collapse
Umm there is a code ro.config.tima will it be tima or time
Related
I don't own these tweaks i have just tested them on arc and they work like charm
#Render UI with GPU
debug.sf.hw=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
ro.sf.lcd_density=240
debug.fb.rgb565=0
# Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# This is a high density device with more memory, so larger vm heaps for it.
# and some dalvik speedups
dalvik.vm.heapsize=40m
# Get more RAM and faster responses by disabling verify-bytecode
#dalvik.vm.dexopt-flags=v=n,o=v,m=y
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.checkjni=0
dalvik.vm.checkjni=false
dalvik.vm.check-dex-sum=false
dalvik.vm.jniopts=warnonly
# gecata test
dalvik.vm.check-dex-sum=false
# gecata test
dalvik.vm.jmiopts=forcecopy
# Turn on Just In Time in dalvik virtual machine
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
# For HSDPA low throughput
ro.ril.disable.power.collapse=1
# For sensor sleep control
ro.ril.sensor.sleep.control=1
ro.wifi.hotspotUI=1
ro.tether.denied=false
# enable/disable data in roaming
#ro.com.android.dataroaming=true
ro.com.android.dataroaming=false
# For quick boot mode
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Hide debuging icon from taskbar
persist.adb.notify=0
persist.service.adb.enable=1
# Enable egl profiler - enable harware egl profile
debug.egl.profiler=1
#Makes streaming videos stream faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# Decrease time for screen off/on durrign call
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Decrease dial out delay
ro.telephony.call_ring.delay=0
ring.delay=0
# Disable WiFi calling for EU models
ro.ril.enable.ganlite=0
#Noise Cancellation Off
htc.audio.alt.enable=0
htc.audio.hac.enable=0
### Kernel Tweaks
# Disable error checking (Should speed things up a bit)
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
### Allow purging of assets (System can free more Ram when needed) ###
persist.sys.purgeable_assets=1
# Disable strict mode checking
persist.android.strictmode=0
# Disable the zygote loader
ro.wmt.blcr.enable=0
# Keep launcher in memory
ro.HOME_APP_ADJ=1
# Won't let memory managers to kill Launcher
ro.PERCEPTIBLE_APP_ADJ=2
#ro.HOME_APP_MEM=2048
# Tweaks for battery saving
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
# For sensor sleep control
ro.ril.sensor.sleep.control=1
# Qualcomm display settings -- Video acceleration and HW degugging
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# Xloud Engine
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
media.xloud.enable=1
media.xloud.supported=true
# More precisely incall volume control
ro.config.vc_call_vol_steps=15
# Increase overall scrool speed and enable rotation to 270 degree
windowsmgr.max_events_per_sec=170
windowsmgr.support_rotation_270=true
# Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
### Disable Logers (safe battery + performance gain)
### Disable checkin services, error reporting and logging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
### Touch tunning ###
touch.presure.scale=0.001
#ro.min_pointer_dur=
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
persist.data_netmgrd_mtu=1482
#net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
# Google DNS Tweak -- fastest dns
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
will test and report asap
soon
iossux said:
will test and report asap
Click to expand...
Click to collapse
:good:
What to edit or how to use these tweaks?
<hit thanks if I helped you, don't just write it..
sent from Batcave>
easy
vik_017 said:
What to edit or how to use these tweaks?
<hit thanks if I helped you, don't just write it..
sent from Batcave>
Click to expand...
Click to collapse
copy ur build.prop from rom to pc add tweaks put back to rom set permission rwrr reboot :good:
#enable harware egl profile debug.egl.profiler=1 #16BIT transparency , Smother Scrolling persist.sys.use_16bpp_alpha=1
#debug.composition.type=gpu debug.composition.type=c2d debug.performance.tuning=1 debug.enabletr=true debug.qctwa.preservebuf=1 dev.pm.dyn_samplingrate=1 video.accelerate.hw=1 ro.vold.umsdirtyratio=20 debug.overlayui.enable=1 debug.egl.hw=1 ro.fb.mode=1 hw3d.force=1
persist.sys.composition.type=c2d persist.sys.ui.hw=1 ro.sf.compbypass.enable=0
#Enable tile rendering debug.enabletr=true persist.sys.composition.type=gpu
#3d performance persist.android.strictmode=0 ro.min_pointer_dur=1 ro.secure=0 Media Quality: Code: ro.media.enc.jpeg.quality=100 ro.media.dec.jpeg.memcap=8000000 ro.media.enc.hprof.vid.bps=8000000 ro.media.dec.aud.wma.enabled=1 ro.media.dec.vid.wmv.enabled=1 ro.media.cam.preview.fps=0 ro.media.codec_priority_for_thumb=so Liquid Smooth Ui: Code: persist.service.lgospd.enable=0 persist.service.pcsync.enable=0 Noise Cancellation: Code:
#Noise Cancellation Off htc.audio.alt.enable=0 htc.audio.hac.enable=0 Sensor Sleep: Code:
# For sensor sleep control ro.ril.sensor.sleep.control=1 Unlock fps limit: Code: debug.egl.swapinterval=0 Qualcomm tweaks: Code: com.qc.hardware=1 debug.qc.hardware=true debug.qctwa.preservebuf=1 debug.qctwa.statusbar=1 Screen Glitches fix: Code: debug.gr.numframebuffers=3 Disable debugging notify icon on statusbar: Code: persist.adb.notify=0 EHRPD Support : Code: ro.config.ehrpd=true Disable boot animation for faster boot : Code: debug.sf.nobootanimation=1 3G network for speeding up : Code: ro.ril.set.mtu1472=1 Disable Logers (safe battery + performance gain) Code: ro.config.htc.nocheckin=1 ro.config.nocheckin=1 profiler.force_disable_ulog=1 profiler.force_disable_err_rpt=1 Better scrolling responsiveness Code: windowsmgr.max_events_per_sec=90 ro.max.fling_velocity=12000 ro.min.fling_velocity=8000 Touch tuning : Code:
### Touch tuning ###
touch.presure.scale=0.001 System prop for tethering denied: Code: ro.tether.denied=false Enable Hardware 3D : Code: hw3d.force=1 Phone will not wake up from hitting the volume rocker: Code: ro.config.hwfeature_wakeupkey=0 Unlock phone by menu key: Code: ro.config.hw_menu_unlockscreen=false Save power while phone is in sleep mode: Code: ro.ril.disable.power.collapse=1 Better scrolling: Code: windowsmgr.max_events_per_sec=90 ro.max.fling_velocity=12000 ro.min.fling_velocity=8000 Support for ipv4 and ipv6.: Code: persist.telephony.support.ipv4=1 persist.telephony.support.ipv6=1 Better battery life: Code: pm.sleep_mode=1 usb_wakeup=enable proximity_incall=enable power_supply.wakeup=enable ro.config.hw_power_saving=1 ro.config.hw_fast_dormancy=1 ro.config.hw_quickpoweron=true persist.sys.use_dithering=0 #improve battery under no signal -- need test ro.mot.eri.losalert.delay=1000 Bravia Engine: Code: ro.service.swiqi.supported=true persist.service.swiqi.enable=1 Xloud Engine: Code: ro.semc.sound_effects_enabled=true ro.semc.xloud.supported=true persist.service.xloud.enable=1 media.xloud.enable=1 media.xloud.supported=true More precisely incall volume control: Code: ro.config.vc_call_vol_steps=15 Increase overall scrool speed and enable rotation to 270 degree: Code: windowsmgr.max_events_per_sec=170 windowsmgr.support_rotation_270=true Better signal reception: Code: persist.cust.tel.eons=1 ro.config.hw_fast_dormancy=1 Enable 16 BIT: Code: debug.fb.rgb565=1 VM tweak: Code: ro.vold.umsdirtyratio=20 Better in call voice quality: Code: ro.ril.enable.amr.wideband Signal Tweaks: Code: persist.cust.tel.eons=1 ro.ril.gprsclass=10 ro.ril.hsdpa.category=8 ro.ril.hsupa.category=6 ro.ril.hsxpa=1 net speed tweaks: Code: net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960 net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960 net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960 net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960 net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960 net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960 net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960 Wireless Tweaks: Code: net.ipv4.ip_no_pmtu_disc=0 net.ipv4.route.flush=1 net.ipv4.tcp_ecn=0 net.ipv4.tcp_fack=1 net.ipv4.tcp_mem=187000 187000 187000 net.ipv4.tcp_moderate_rcvbuf=1 net.ipv4.tcp_no_metrics_save=1 net.ipv4.tcp_rfc1337=1 net.ipv4.tcp_rmem=4096 39000 187000 net.ipv4.tcp_sack=1 net.ipv4.tcp_timestamps=1 net.ipv4.tcp_window_scaling=1 net.ipv4.tcp_wmem=4096 39000 187000 Google DNS Tweak -- fastest DNS service: Code: net.rmnet0.dns1=8.8.8.8 net.rmnet0.dns2=8.8.4.4 net.ppp0.dns1=8.8.8.8 net.ppp0.dns2=8.8.4.4 net.dns1=8.8.8.8 net.dns2=8.8.4.4 Website Bypass: Code: net.dns1=8.8.8.8 net.dns2=8.8.4.4 net.rmnet0.dns1=8.8.8.8 net.rmnet0.dns2=8.8.4.4 DalvikVM: Code: dalvik.gc.type=precise dalvik.vm.dexopt-data-only=1 #Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few C:highfive:
Hello Dear S5 User & Dev this is Build.prop just copy/paste what u want of tweaks on ur Build.prop then save & reboot
Guys this may work on ur Rom & may not so some roms didn't work with this build.prop so asking ur Dev roms okay Guys
~~> SUPPORTING LOLLIPOP <~~
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
Minimum brightness of your screen
ro.lcd_min_brightness=20
#
ro.ril.gprsclass=10
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
#
debug.sf.hw=1
video.accelerate.hw=1
persist.sys.use_dithering=1
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.composition.type=gpu
ro.max.fling_velocity=20000
ro.min.fling_velocity=18000
debug.performance.tuning=1
debug.kill_allocating_task=0
debug.overlayui.enable=1
debug.egl.profiler=1
debug.egl.hw=1
debug.sf.hw=1
hw3d.force=1
hw2d.force=1
force_hw_ui=true
persist.sys.purgeable_assets=1
persist.sys.use_dithering=1
ro.min_pointer_dur=1
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
ro.secure=0
ro.min_pointer_dur=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Screen recognizes only two fingers
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
# ButtonLight Always On - Remove # Below To Enable
ro.mot.buttonlight.timeout=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true
Multi users
# Multi Users
fw.max_users=30
fw.show_multiuserui=1
Holy ****! My phone seems about 300% faster with some of your tweaks! I haven't seen any decrease in battery life, only performance increase! Thanks a lot for those tweaks
guetzli32 said:
Holy ****! My phone seems about 300% faster with some of your tweaks! I haven't seen any decrease in battery life, only performance increase! Thanks a lot for those tweaks
Click to expand...
Click to collapse
Its good to hear thats maybe u should have some init.d I will upload some of thats okay
Sent from my SM-G900F using Tapatalk
@thereassaad Say I want to put in the wifi supplicant scan interval one... do we copy just the line, or do we have to copy the "# Saves some battery without reducing performances" as well? Thanks!
Joe0113 said:
@thereassaad Say I want to put in the wifi supplicant scan interval one... do we copy just the line, or do we have to copy the "# Saves some battery without reducing performances" as well? Thanks!
Click to expand...
Click to collapse
Bro u can choose what you want of tweaks & copy thats line beginning with # ..... & save to ur Build.prop then reboot choose what u want ok bro & its up to u
Sent from my SM-G900F using Tapatalk
Joe0113 said:
@thereassaad Say I want to put in the wifi supplicant scan interval one... do we copy just the line, or do we have to copy the "# Saves some battery without reducing performances" as well? Thanks!
Click to expand...
Click to collapse
You don't have to copy the '#...' lones, they're judt comments that make it easier to understand what it's about.
Can anyone confirm that the camera build.prop tweaks work?
Sent from my SM-G900F using XDA Free mobile app
lightninbug said:
Can anyone confirm that the camera build.prop tweaks work?
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Its working for me u can add it & u see
Sent from my SM-G900F using Tapatalk
Is there any flash able zip for this?
Sent from my SM-P605 using XDA Premium 4 mobile app
pride_kr said:
Is there any flash able zip for this?
Sent from my SM-P605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Till now no its simply because all of tweaks can use it on all S5 phones btw its easy too just copy/paste on ur Build.prop
Sent from my SM-G900F using Tapatalk
Great tweaks, not sure if all will be great. You can use Android tweaker to do many of these.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Hi thanks for the TWEAKS, ive got one question thou, I saved the 3G tweak, but after doing that I can't save anymore or even remove it? I'm probably being dumb but I've never had this problem before
Sent from my SM-G900F using XDA Free mobile app
Applying all these tweaks cause an increase in battery drain for me.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Thanks for your tweaks but I think some of them doesn't works because they are for other devices, I read that in the past somewhere. The ones with mot are from Motorola build.prop and the one with lge are from LG (Electronic).
ro.mot.eri.losalert.delay=1000
ro.lge.proximity.delay=15
mot.proximity.delay=15
Verstuurd vanaf mijn SM-G900F met Tapatalk
kalans said:
Applying all these tweaks cause an increase in battery drain for me.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
you can use Android tweaker !
I'm sorry to say this but almost all of these are useless. Some of things could decrease the performance of device.
FlemishDroid said:
Thanks for your tweaks but I think some of them doesn't works because they are for other devices, I read that in the past somewhere. The ones with mot are from Motorola build.prop and the one with lge are from LG (Electronic).
ro.mot.eri.losalert.delay=1000
ro.lge.proximity.delay=15
mot.proximity.delay=15
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
U can change from 15 to 25 u can play in it thats i do bro
ro.lge.proximity.delay=25
mot.proximity.delay=25
& maybe they used on motorola build.prop but I use it in mine & u can see on my build.prop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G900F using Tapatalk
marbulas said:
I'm sorry to say this but almost all of these are useless. Some of things could decrease the performance of device.
Click to expand...
Click to collapse
Indeed. People should read this and it's part two before doing any of these....
http://www.jeffmixon.com/examining-build-prop-tweaks-for-android-ics-a-comprehensive-guide-part-1/
Sent from my SM-G900F using Tapatalk
Out of all the ones that are wrong, obsolete or irrelevant, this one made me smile the most:
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
Click to expand...
Click to collapse
How does disabling the menu hardware key on the lock screen improve performance?
DSA said:
Out of all the ones that are wrong, obsolete or irrelevant, this one made me smile the most:
How does disabling the menu hardware key on the lock screen improve performance?
Click to expand...
Click to collapse
Can u post screen shot of this please
Sent from my SM-G900F using Tapatalk
Just For Rooted Devices
The best build.prop tweak for Grand Prime 4.4.4 ( Fully tested on (530H-DV))
Before doing anything plz backup your main build.prop located in root/system/build.prop
Here is some Enhancements:
1. Supreme Battery life (even more in idle)
2. Smoother experience
3. 3G Speed hacks (new)
If u faced any problem please change "ro.ril.hsdpa.category=24" to "ro.ril.hsdpa.category=20"
4. Google DNS
5. Better Microphone
6. More Ram
7. Better signal reception
8. Wireless Tweaks
9. Smoother video streaming and tweak media
10. Increase the Antutu Score (new)
11. Faster Boot-Animation FPS (new)
12. Better call voice quality (new)
13. Game tweaks
14. Qualcomm Tweaks
15. Multi Users (Enabled) (new)
U can Use Root Explorer app to edit your build.prop
Remember to set the permission to rw-r-r after editing
These tweaks are fully operational for my phone (530H-DV)
Please always pay attention to risk of soft bricking
If anything goes wrong use your backup Build.prop to get the default settings
#Method 2 : Manually Editing (much more safer for inexperienced users ) RECOMMENDED
Version 2
Update date : 13 July 2015
Working SM-G530H
adblocker said:
Here we go...
The best build.prop tweak for Grand Prime 4.4.4 ( Fully tested on (530H-DV))
Before doing anything plz backup your main build.prop located in root/system/build.prop
here is some changes:
1. Supreme Battery life (even more in idle)
2. Smoother experience
3. 3G Speed hacks
4. Google DNS
5. Better Microphone
6. More Ram
7. Better signal reception
8. Wireless Tweaks
9. Smoother video streaming and tweak media
10. more...
U can Use ( Root Explorer )app to edit your build.prop
Remember to set the permission to rw-r-r
These tweaks are fully operational for my phone (530H-DV)
Please always pay attention to risk of soft bricking
If anything goes wrong use your backup Build.prop to get the default settings
Click to expand...
Click to collapse
How to use this mate? in detailed please
Mr.IDK said:
How to use this mate? in detailed please
Click to expand...
Click to collapse
-Just download the link.
-Copy original build.prop using rootex root/system and paste to your sdcard for backup.
-put the build.prop you download and push into root/system
-change permission to rw-r--r--
-reboot your device
Sent from my SM-G530H using XDA Free mobile app
any way to activate USB OTG on Grand Prime ?
shahi.persian said:
any way to activate USB OTG on Grand Prime ?
Click to expand...
Click to collapse
That's a hardware limitation.
Bruh... it works.
shahi.persian said:
any way to activate USB OTG on Grand Prime ?
Click to expand...
Click to collapse
Grand Prime (All Models) Doesn't support OTG since it can't bring power for external USB devices So it cant be a USB Host ... its just a USB Client .
Hardware doing it doesn't exits on Mainboard
However I put a option for it and it s ON in build.prop Just for you
deyene said:
-Just download the link.
-Copy original build.prop using rootex root/system and paste to your sdcard for backup.
-put the build.prop you download and push into root/system
-change permission to rw-r--r--
-reboot your device
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
Thanks mate... but what is the build.prop anyways?
where do I locate that?
haha sorry for the question, I want to know more than a simple tutorial.
Mr.IDK said:
Thanks mate... but what is the build.prop anyways?
where do I locate that?
haha sorry for the question, I want to know more than a simple tutorial.
Click to expand...
Click to collapse
Open your root explorer, open the system folder. and u will see build.prop
Sent from my SM-G530H using XDA Free mobile app
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
KM_exeryon said:
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
Click to expand...
Click to collapse
Did you made a nandroid backup? If not, factory reset from recovery, if that doesn't help, flash stock rom.
KM_exeryon said:
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
Click to expand...
Click to collapse
Sorry for it ...I think you didn't change the permission to rw-r-r but don't worry
Just put your backup build.prop in the system folder in the file I attached .Try the 1st one and reboot.
if it doesn't work try the second
flash it with custom recovery.\
if it doesn't work try the second
tell me about it . If they don't work we have more options don't worry.
Has anyone already comproved that the tweaks works? and improves the general performance?
what is post newer? post#1 or post#13?
post #13 is for fixing permission?
Sent from my SM-N9005 using Tapatalk
roozbeh158 said:
what is post newer? post#1 or post#13?
post #13 is for fixing permission?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
nope the last post is for recovery the default build.prop
adblocker said:
Sorry for it ...I think you didn't change the permission to rw-r-r but don't worry
Just put your backup build.prop in the system folder in the file I attached .Try the 1st one and reboot.
if it doesn't work try the second
flash it with custom recovery.\
if it doesn't work try the second
tell me about it . If they don't work we have more options don't worry.
Click to expand...
Click to collapse
my unit is fine now. what i did was i flashed my unit via odin and now i'm thinking if i still try to modify my unit using your build.prop.
i just want to ask if your modified "build.prop" is applicable to ALL grandprime firmwares?? another thing is that i want to suggest that in your tutorial please include the troubleshooting of our unit in case of failure. I made back-up the last time i try but i don't know how to use when my unit was bricked. BTW thanks for your thread.
Manually Editing (More Safer)
For rooted Devices onlyIts totally Working on 530H-DV other devices ? U tell me
Here is some tips:
Install RootExplorer
Backup your build.prop located in root/system/build.prop
copy it to your computer
open your default build.prop with notepad++
Find this : " ro.pip.gated=0 "
as you see it s the last line . please copy these lines to it Just below the " ro.pip.gated=0 "
#ADD
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
pm.sleep_mode=1
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=20
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=5
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.lowlatency.rec=false
audio.gapless.playback.disable=true
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
Minimum brightness of your screen
ro.lcd_min_brightness=2
# Saves some battery without reducing performances
proximity_incall=enable
usb_wakeup=enable
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
#For usb storage
ro.usb_host=1
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Multi Users
fw.max_users=10
fw.show_multiuserui=1
#done
save it and replace it with the default one.
Remmeber to set the permission to rw-r-r (all reads checked all execute unchecked just the first
write checked) or set it to 0644 with RootExplorer (IF YOU DO NOT DO THAT YOUR DEVICE GONNA BRICK)
reboot . If anything goes wrong try to use your default build.prop that u've backed up
adblocker said:
Its totally Working on 530H-DV other devices ? U tell me
Here is some tips:
Backup your build.prop.
open your default build.prop with notepad++
Find this : " ro.pip.gated=0 "
as you see it s the last line . please copy these lines to it Just below the " ro.pip.gated=0 "
#ADD
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
pm.sleep_mode=1
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=20
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=5
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.lowlatency.rec=false
audio.gapless.playback.disable=true
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
Minimum brightness of your screen
ro.lcd_min_brightness=2
# Saves some battery without reducing performances
proximity_incall=enable
usb_wakeup=enable
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
#For usb storage
ro.usb_host=1
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
#done
save it and replace it with the default one.
Remmeber to set the permission to rw-r-r (all reads checked all execute unchecked just the first
write checked) or set it to 0644 with RootExplorer
and reboot . If anything goes wrong try to use your default setting
Click to expand...
Click to collapse
FINALLY MY PHONE STARTS AFTER EDITING MY BUILD.PROP.. as of now my unit is under observation for the changes. Thank you sir. :good::good:
deyene said:
Open your root explorer, open the system folder. and u will see build.prop
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
Thanks I'm just a bit noob of this build.prop and It took me 10mins to look for permission to rw-r-r that he's talking about...
anyways before I paste the file or the text... will It be compatible with my firmware because It's for G530HXCU1AOE2 and my phone is G530HXCU1AOA2... should I replace that name?
---------- Post added at 03:17 PM ---------- Previous post was at 03:03 PM ----------
My root browser is crushing after I save it to rw-r-r and I can't edit the text or paste the file... It's always failed
---------- Post added at 03:34 PM ---------- Previous post was at 03:17 PM ----------
My build.prop is now empty after I paste the modified build.prop but I don't find any problems... why is that?
I tried boeffla gave me boot loop.
Im currently on slim lp 5.1.1 and i wanma change the kernel to tweak some battery stuff.
Thanks in advance
http://arter97.com/browse/S3/kernel/xda/arter97-kernel-5.0.zip
http://forum.xda-developers.com/devdb/project/dl/?id=18503
tested ?
or
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Enable GPU Acceleration
debug.sf.hw=1
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
# Battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Reduce dial-out time
ro.telephony.call_ring.delay=0
# Allow purge of assets to free more ram
persist.sys.purgeable_assets=1
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=15
mot.proximity.delay=15
ro.ril.enable.amr.wideband=1
# TOUCH
touch.presure.scale=0.001
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Force launcher into memory
ro.HOME_APP_ADJ=1
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
#dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Disable Error reporting and logs
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Fix some application issues (FC)
ro.kernel.android.checkjni=0
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# CRT
persist.sys.screen_off=crt
persist.sys.screen_on=none
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
# Disable logcat
logcat.live=disable
# Better image quality, lower performance.
lpa.decode=false
tunnel.decode=false
lpa.use-stagefright=false
del