Hello All, I have a quick question regarding unlocking my device.
E2303
Service Menu -> Rooting Status: UNAVAILABLE
Used Flashtool BLU method with Key generated from Sony Website.
Code:
06/004/2016 19:04:01 - INFO - Please connect your device into flashmode.
06/004/2016 19:04:08 - INFO - Device connected in flash mode
06/004/2016 19:04:09 - INFO - Opening device for R/W
06/004/2016 19:04:09 - INFO - Reading device information
06/004/2016 19:04:09 - INFO - Phone ready for flashmode operations.
06/004/2016 19:04:09 - INFO - Opening TA partition 2
06/004/2016 19:04:09 - INFO - Current device : E2303 - YT911A29J5 - 1295-7055_R3C - 1291-5963_26.3.A.0.131 - GENERIC_26.3.A.0.131
06/004/2016 19:04:09 - INFO - Closing TA partition
06/004/2016 19:04:09 - INFO - No loader in the bundle. Searching for one
06/004/2016 19:04:09 - INFO - Processing loader.sin
06/004/2016 19:04:09 - INFO - Checking header
06/004/2016 19:04:09 - INFO - Flashing data
06/004/2016 19:04:09 - INFO - Loader : S1_Root_54c8 - Version : MSM8936_14 / Boot version : S1_Boot_MSM8939_LA2.0_207 / Bootloader status : NOT_ROOTABLE
06/004/2016 19:04:09 - INFO - Max packet size set to 512K
06/004/2016 19:04:09 - INFO - Opening TA partition 2
06/004/2016 19:04:09 - INFO - Start Reading unit 00 00 08 B2
06/004/2016 19:04:09 - INFO - Reading TA finished.
06/004/2016 19:04:09 - INFO - Closing TA partition
06/004/2016 19:04:11 - INFO - Unlocking device
06/004/2016 19:04:11 - INFO - Opening TA partition 2
06/004/2016 19:04:11 - INFO - Writing TA unit 000008B2. Value : 37 38 41 34 30 43 45 39 39 33 42 43 41 42 37 39
06/004/2016 19:04:11 - INFO - Closing TA partition
06/004/2016 19:04:11 - INFO - Unlock finished
06/004/2016 19:04:18 - INFO - Ending flash session
06/004/2016 19:04:18 - INFO - You can now unplug and restart your device
06/004/2016 19:04:18 - INFO - Device connected in flash mode
06/004/2016 19:04:19 - INFO - Device disconnected
This method uses flashmode. I have also used the standard method using Fastboot (Blue LED) suggested on the sony unlock page.
After running OEM Unlock command:
Code:
...
FAILED (remote: Command not allowed)
finished. total time: 0.004s
So. What I can deduce is that Flashtool is saying that it has unlocked bootloader however it has not. OEM Unlock command is not being run on the device.
I have tried this with USB Debugging Enabled/Disabled as well as OEM Unlock Enabled/Disabled in dev options.
Running 6.0 Russian FW of Marshmellow.
So my question is: Is it possible to unlock the bootloader on this Device (E2303 UK O2).
What I can think is Windows 10 Driver not working on Fastboot (however fastboot devices lists the device), FW preventing OEM Unlock command from running.?I have seen other users have success unlocking E2303 but was also told that the re seller can lock this option? I could do with some hellp here, Thanks!
This is what happened to my phone, and me too want to unlock it
Sent from my E2303 using Tapatalk
Do you guys have locked sim phones? If this is the case, then you have unlock bootloader allowed: No status, and you can't unlock bootloader... you have to unlock sim first and then try to unlock bootloader.
vyrussu said:
Do you guys have locked sim phones? If this is the case, then you have unlock bootloader allowed: No status, and you can't unlock bootloader... you have to unlock sim first and then try to unlock bootloader.
Click to expand...
Click to collapse
Totally wrong, the sim is nothing to do with a locked Bootloader it's the network that lock them down usually when running there own firmware versions the only network I know of that supply sim free network unlocked devices for all there handsets whether payg or contract is three. If its a network supplied M4 aqua and the Bootloader is locked down(bootloader unlock allowed:NO) unlocking the device to any network won't change the Bootloader unlock status to yes.
Enter *#*#7378423#*#* into the dialpad, software configuration and scroll down. If it says-
Bootloader unlock allowed:NO you won't be unlocking the Bootloader EVER even if you unlock the device to use any network
If it says-
Bootloader unlock allowed:YES which all sim free network unlocked devices will be your fine.
Sent from my Xperia XA using XDA Labs
aidy.lucas said:
Totally wrong, the sim is nothing to do with a locked Bootloader it's the network that lock them down usually when running there own firmware versions the only network I know of that supply sim free network unlocked devices for all there handsets whether payg or contract is three. If its a network supplied M4 aqua and the Bootloader is locked down(bootloader unlock allowed:NO) unlocking the device to any network won't change the Bootloader unlock status to yes.
Enter *#*#7378423#*#* into the dialpad, software configuration and scroll down. If it says-
Bootloader unlock allowed:NO you won't be unlocking the Bootloader EVER even if you unlock the device to use any network
If it says-
Bootloader unlock allowed:YES which all sim free network unlocked devices will be your fine.
Sent from my Xperia XA using XDA Labs
Click to expand...
Click to collapse
So what is our option to unlock the bootloader? By carrier.?
Sent from my E2303 using Tapatalk
vic604 said:
So what is our option to unlock the bootloader? By carrier.?
Click to expand...
Click to collapse
Like I said go to the service menu *#*#7378423#*#* software configuration if it says bootloader unlock allowed:yes your fine to unlock it if it says bootloader unlock allowed:NO there's nothing you can do change it to yes not even Sony. It's permanently locked down the carrier/network will not unlock the Bootloader, they'll unlock the radio to use any carrier sim but the Bootloader will remain locked. I can't put it any simpler
Sent from my Xperia XA using XDA Labs
Ok Thanks! So it isnt possible at all? I can't flash a FW which will enable me to unlock the bootloader?
Basically I want to do this to install a custom ROM and root it because of the massive storage issues the m4 aqua has.
Any advice on what to do if the bootloader is locked? Is it still possible to flash a ROM or Root it to remove system applications?
Cheers
Tokusea said:
Ok Thanks! So it isnt possible at all? I can't flash a FW which will enable me to unlock the bootloader?
Basically I want to do this to install a custom ROM and root it because of the massive storage issues the m4 aqua has.
Any advice on what to do if the bootloader is locked? Is it still possible to flash a ROM or Root it to remove system applications?
Cheers
Click to expand...
Click to collapse
Yes. You could root it, but only lollipop rom, and is still bloat ware removal script, and also you could use link2sd. I did that, and I move a big part of apps on sd, and install directly on sd, the apps that I downloaded from playstore
Sent from my E2303 using Tapatalk
Tokusea said:
Ok Thanks! So it isnt possible at all? I can't flash a FW which will enable me to unlock the bootloader?
Basically I want to do this to install a custom ROM and root it because of the massive storage issues the m4 aqua has.
Any advice on what to do if the bootloader is locked? Is it still possible to flash a ROM or Root it to remove system applications?
Cheers
Click to expand...
Click to collapse
depends on what country you live, if you buyed the phone by carrier but you have unlocked with code, in some countries you can ask sony service, they take your phone and they change the rooting status to "allowed"
in spain at least worked that way
Related
Hi!
I got my Xperia S a day ago, rebranded it to Nordic firmware while waiting for my sim unlock code. Today received a message from second place that there some trouble with imei and code can not be provided. So I need to get back on rogers firmware in order to exchange it.
I have tried to do it my self but when flashing in the middle it returns an error
18/048/2012 14:48:50 - INFO - Phone ready for flashmode operations.
18/048/2012 14:48:50 - INFO - Start Flashing
18/048/2012 14:48:50 - INFO - Flashing loader
18/048/2012 14:48:51 - INFO - Ending flash session
18/048/2012 14:48:51 - ERROR - Error in processHeader
18/048/2012 14:48:51 - ERROR - Error flashing. Aborted
18/048/2012 14:48:51 - INFO - Device connected in flash mode
18/048/2012 14:48:52 - INFO - Device disconnected
18/048/2012 14:48:55 - INFO - Device connected in flash mode
now redownloaded and install flash tool again, created bundle now with error:
18/002/2012 15:02:27 - INFO - <- This level is successfully initialized
18/002/2012 15:02:30 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
18/002/2012 15:02:30 - INFO - You can drag and drop ftf files here to start flashing them
18/002/2012 15:02:39 - INFO - Device disconnected
18/002/2012 15:02:54 - INFO - Decrypting FILE_3
18/003/2012 15:03:58 - INFO - Decrypting FILE_2
18/004/2012 15:04:00 - INFO - Decrypting FILE_1
18/004/2012 15:04:01 - INFO - Decryption finished
18/004/2012 15:04:29 - INFO - Starting bundle creation
18/004/2012 15:04:29 - INFO - Adding loader.sin renamed as loader.sin to the bundle
18/004/2012 15:04:29 - INFO - Adding apps_log_S1-SW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as apps_log.sin to the bundle
18/004/2012 15:04:29 - INFO - Adding partition-image_S1-SW-LIVE-DE72-PID1-0002-MBR.sin renamed as partition-image.sin to the bundle
18/004/2012 15:04:29 - INFO - Adding cache_S1-SW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as cache.sin to the bundle
18/004/2012 15:04:30 - INFO - Adding amss_fsg_S1-MODEMSW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as amss_fsg.sin to the bundle
18/004/2012 15:04:30 - INFO - Adding amss_fs_1_S1-MODEMSW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as amss_fs_1.sin to the bundle
18/004/2012 15:04:30 - INFO - Adding system_S1-SW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as system.sin to the bundle
18/005/2012 15:05:27 - INFO - Adding simlock.ta renamed as simlock.ta to the bundle
18/005/2012 15:05:27 - INFO - Adding amss_fs_2_S1-MODEMSW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as amss_fs_2.sin to the bundle
18/005/2012 15:05:27 - INFO - Adding userdata_S1-SW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as userdata.sin to the bundle
18/005/2012 15:05:32 - INFO - Adding kernel_S1-SW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as kernel.sin to the bundle
18/005/2012 15:05:32 - INFO - Adding fotakernel_S1-SW-LIVE-DE72-PID1-0002-S1-PARTITION.sin renamed as fotakernel.sin to the bundle
18/005/2012 15:05:33 - INFO - Finished bundle creation
18/005/2012 15:05:58 - INFO - Selected S_73_rogers.ftf
18/005/2012 15:05:58 - INFO - Preparing files for flashing
18/006/2012 15:06:20 - INFO - Please connect your device into flashmode.
18/006/2012 15:06:24 - INFO - Device connected in flash mode
18/006/2012 15:06:25 - INFO - Opening device for R/W
18/006/2012 15:06:25 - INFO - Reading device information
18/006/2012 15:06:25 - INFO - Phone ready for flashmode operations.
18/006/2012 15:06:25 - INFO - Start Flashing
18/006/2012 15:06:25 - INFO - Flashing loader
18/006/2012 15:06:27 - INFO - Loader : null - Version : R5C004 / Bootloader status : NOT_ROOTABLE
18/006/2012 15:06:27 - INFO - Flashing kernel.sin
18/006/2012 15:06:32 - INFO - Flashing fotakernel.sin
18/006/2012 15:06:36 - INFO - Flashing amss_fs_2.sin
18/006/2012 15:06:39 - INFO - Flashing amss_fs_1.sin
18/006/2012 15:06:40 - INFO - Flashing partition-image.sin
18/006/2012 15:06:40 - INFO - Ending flash session
18/006/2012 15:06:40 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0076";ERR_DYNAMIC="failed to set ta config";
Corrected ftf bundle by not including partition-image.sin
So far so good, flashed correctly.
Now everything is good.
hows the phone run on nordic firmware?
glad I've been reading, I'm having a hard time figuring out if i need to sim unlock before i unlock the boot loader.
as the statement above it seems you did not sim unlock first.
do i need to sim unloack a rogers locked xperia s first, before i unlock the bootloader?
Thanks
I just got an unlock code from MobileInCanada, took about 18 hours. Popped in my Bell Simcard and it worked. The thing is that the bootloader is still locked.
On Nordic firmware phone is running great, and best part no rogers start up screen and crapware apps!!! ( make sure you got rogers back up firmware just in case)
I think that if you use official boot loader unlock you have to sim unlock your phone first.
In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
What i noticed that before I sim unlocked my first xperia S (had dead pixels returned same day) it said No in that menu, and after sim unlock it changed to Yes.
Sim unlock does not unlock bootloader. You got to use sony mobile developer website and follow all instruction on there.
unlockbootloader.sonymobile.com/instructions
ok mine says unlock boot loader allowed = no
I ordered my sim unlock 2 hours ago, so i guess im done tonight. really dont want to setup my new toy just to do it again in a day or two.
Thanks
zimbashka said:
On Nordic firmware phone is running great, and best part no rogers start up screen and crapware apps!!! ( make sure you got rogers back up firmware just in case)
I think that if you use official boot loader unlock you have to sim unlock your phone first.
In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
What i noticed that before I sim unlocked my first xperia S (had dead pixels returned same day) it said No in that menu, and after sim unlock it changed to Yes.
Sim unlock does not unlock bootloader. You got to use sony mobile developer website and follow all instruction on there.
unlockbootloader.sonymobile.com/instructions
Click to expand...
Click to collapse
Mine didn't change to yes...
Matt1408 said:
Mine didn't change to yes...
Click to expand...
Click to collapse
Have you try unlockbootloader.sonymobile.com/instructions ?
zimbashka said:
Have you try unlockbootloader.sonymobile.com/instructions ?
Click to expand...
Click to collapse
2.In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Mine says no, can't be unlocked... I can try the rest of the steps, nothing will happen...
sorry don't know what to advise, have no phone on me any longer.
zimbashka said:
( make sure you got rogers back up firmware just in case)
Click to expand...
Click to collapse
How did you back up the rogers firmware?
still waiting for my sim unlock key from canadagsm.ca, might be a late one tonight. lol
What I did to back up rogers firmware is use SEUS to update your phone even if it has latest software. After update is successful go to C:\Program Files\Sony Ericsson\Update Service\ db folder there should be 3 files named FILE_XXXXX, (their size is 64kb,9487kb,288381kb you should have something similar).
Copy those 3 files to some folder that is easy for you to find.
Then open latest flashtool go to advanced>decrypt files
when window opens select folder where those files saved.
Select those 3 file and wait for it to finish decrypting.
Once it is done another window will pop up that will assist you to create ftf bundle. Just select all files accept for partition-image.sin and wait for it to finish. Created ftf bundle will be in directory where falashtool was instaled in folder called firmwares.
You are done!
Now you can flash your phone anytime you need to put Rogers firmware back in.
thanks, i have been using htc for a few months and coming back to se (sony) i feel as though im starting all over again.
do you know if you can enter the sim unlock code with out using a different sim? i don't have one.
if you need a sim from another carrier i guess ill have to buy one.
Yeah, you will need to use another sim card. I found an old Bell one and I cut it up to fit. Worked, but easy to screw up.
Matt1408 said:
Mine didn't change to yes...
Click to expand...
Click to collapse
I think that rebranding of the phone is necessary step for your phone to be boot loader unlockable. At least that is what I understand from reading forum.
I just got new xperia S (sim unlocked it few hours ago) will put another software and let you know if that changed anything.
edit:
Just finished with flasing still boot loader not unlockable.
ok i entered my sim unlock code and the service menu still says bootloader unlock allow=no
does this mean i cant use sony's site to unlock the bootloader?
I guess it's the same boat as I am on. I guess we have to wait for the test point method to become active. (And in the proccess tear apart our phones)
I really want to like this phone but it's hard to do with the Sony interface. I would love to load up some CM9 right now but I can't due to this stupid carrier crap. I do wish it was more like Europe were unlocked phones are not some kind of secret market.
Oh well, I guess I will have to do with using a custom launcher for now...
yeah it might be a while before the test point id ready.
i have a question for rogers users, in the service menu my model says, LT26i, should we not be LT26a
I thought se versions with i at the end was for international versions?
Yeah, I noticed that right away. I don't think an "a" version of the phone exists. I believe the "i" is just capable of all bands.
zimbashka said:
On Nordic firmware phone is running great, and best part no rogers start up screen and crapware apps!!! ( make sure you got rogers back up firmware just in case)
Click to expand...
Click to collapse
just had a thought, i wonder if using the ftf files of a rogers phone that can have the boot loader unlocked and using the se update service with those files would allow me to unlock the bootloader on se sites.?
maybe a dev can answer this.
Im using flashtool on linux to unlock the bootloader on my x10mp.
When I follow the unlocking instructions, the message shown is:
INFO - Processing loader
26/056/2013 17:56:34 - INFO - Checking header
26/056/2013 17:56:34 - INFO - Flashing data
26/056/2013 17:56:36 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
26/056/2013 17:56:36 - INFO - Start Reading property
26/056/2013 17:56:36 - INFO - Reading TA finished.
26/056/2013 17:56:36 - INFO - Ending flash session
26/056/2013 17:56:36 - INFO - Found semcSL
26/056/2013 17:56:36 - INFO - You can now unplug and turn on device, then plug it again
does this mean the BL cannot be unlocked on my phone? or am I doing something wrong?
the "drivers" folder in the flashtool installation is empty.
also, when I click Help->Check Drivers it shows:
26/013/2013 18:13:43 - INFO - List of ADB devices :
26/013/2013 18:13:43 - INFO - - none
26/013/2013 18:13:43 - INFO - List of fastboot devices :
26/013/2013 18:13:43 - INFO - - none
any suggestions?
TIA
Have u tried looking for a tutorial on XDA? They actually work too. I succesfully did it. If u do, be sure to read every step carefully!
Sent from my E10i using xda app-developers app
tnx.
I've followed these tutorials:
http://i-amhereforyou.blogspot.co.il/2012/06/unlock-bootloader-for-xperia.html
the current flashtool should be able to unlock the BL all by itself. it detects my phone but fails to unlock it.
I've checked the date number under the battery and its says "11W10" so the phone should be ok for unlocking the BL.
any suggestions?
TIA
mzzxx11 said:
tnx.
I've followed these tutorials:
http://i-amhereforyou.blogspot.co.il/2012/06/unlock-bootloader-for-xperia.html
the current flashtool should be able to unlock the BL all by itself. it detects my phone but fails to unlock it.
I've checked the date number under the battery and its says "11W10" so the phone should be ok for unlocking the BL.
any suggestions?
TIA
Click to expand...
Click to collapse
Haha, mine is 11w04, atleast we don't have higher
Sent from my E10i using xda app-developers app
Hi everybody!
When you try to upgrade operate system from version 2.1 (everything is the same as in the video) to version 4.x runs everything is fine until the moment you try to flash. BootLoader is unlocked. Mobile device is functional, just need higher OS version for application
link - video tutorial
hell, I'm a new user, I will not link here - I can send the email?
Lists me when you try to flash the device this error:
10/044/2014 16:44:45 - INFO - <- This level is successfully initialized
10/044/2014 16:44:53 - INFO - Selected E10_2.6.32.60-nAa-05.ftf
10/044/2014 16:44:53 - INFO - Preparing files for flashing
10/044/2014 16:44:54 - INFO - Please connect your device into flashmode.
10/045/2014 16:45:06 - INFO - Device connected in flash mode
10/045/2014 16:45:07 - INFO - Opening device for R/W
10/045/2014 16:45:07 - INFO - Reading device information
10/045/2014 16:45:07 - INFO - Phone ready for flashmode operations.
10/045/2014 16:45:07 - INFO - Start Flashing
10/045/2014 16:45:07 - INFO - Flashing loader
10/045/2014 16:45:08 - INFO - Ending flash session
10/045/2014 16:45:08 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ER R_DYNAMIC="SIN header verification failed"
Do not know what to do?
I use the same software as in the video, I can possibly send log from flashtool.
Thanks. VERY, VERY!
Milan 2514 said:
Hi everybody!
When you try to upgrade operate system from version 2.1 (everything is the same as in the video) to version 4.x runs everything is fine until the moment you try to flash. BootLoader is unlocked. Mobile device is functional, just need higher OS version for application
link - video tutorial
hell, I'm a new user, I will not link here - I can send the email?
Lists me when you try to flash the device this error:
10/044/2014 16:44:45 - INFO - <- This level is successfully initialized
10/044/2014 16:44:53 - INFO - Selected E10_2.6.32.60-nAa-05.ftf
10/044/2014 16:44:53 - INFO - Preparing files for flashing
10/044/2014 16:44:54 - INFO - Please connect your device into flashmode.
10/045/2014 16:45:06 - INFO - Device connected in flash mode
10/045/2014 16:45:07 - INFO - Opening device for R/W
10/045/2014 16:45:07 - INFO - Reading device information
10/045/2014 16:45:07 - INFO - Phone ready for flashmode operations.
10/045/2014 16:45:07 - INFO - Start Flashing
10/045/2014 16:45:07 - INFO - Flashing loader
10/045/2014 16:45:08 - INFO - Ending flash session
10/045/2014 16:45:08 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ER R_DYNAMIC="SIN header verification failed"
Do not know what to do?
I use the same software as in the video, I can possibly send log from flashtool.
Thanks. VERY, VERY!
Click to expand...
Click to collapse
Looks like your bootloader is not unlocked
Can you look at the output from S1Tool?
SmG67 said:
Looks like your bootloader is not unlocked
Can you look at the output from S1Tool?
Click to expand...
Click to collapse
Now I look at it, how do I know that it is not unlocked?
phone menu item added superuser
thanks
SmG67 said:
Looks like your bootloader is not unlocked
Can you look at the output from S1Tool?
Click to expand...
Click to collapse
X10 Flashing tool 0.7.1.0 write Root Access Allowed :-/
Milan 2514 said:
X10 Flashing tool 0.7.1.0 write Root Access Allowed :-/
Click to expand...
Click to collapse
Getting Root Access is NOT the same as unlocking your bootloader.
Root Access gives you access to the system files in the ROM part of the phone.
Bootloader unlocking gives you access to change the Kernel. So your bootloader is NOT unlocked by the rooting process.
SmG67 said:
Getting Root Access is NOT the same as unlocking your bootloader.
Root Access gives you access to the system files in the ROM part of the phone.
Bootloader unlocking gives you access to change the Kernel. So your bootloader is NOT unlocked by the rooting process.
Click to expand...
Click to collapse
Thank you, I understand, I'm finally someone explained clearly, there are some easy software to unlock?
Thank you very much
Milan 2514 said:
Thank you, I understand, I'm finally someone explained clearly, there are some easy software to unlock?
Thank you very much
Click to expand...
Click to collapse
Flashtool will do it, but you have to be careful.
There are some checks to be done before you go and unlock it because it can break your phone. There is a link in the kernel-thread to unlocking the bootloader, that will tell you what to look for to see if it's safe. If it is you can unlock it with flashtool.
SmG67 said:
Flashtool will do it, but you have to be careful.
There are some checks to be done before you go and unlock it because it can break your phone. There is a link in the kernel-thread to unlocking the bootloader, that will tell you what to look for to see if it's safe. If it is you can unlock it with flashtool.
Click to expand...
Click to collapse
Ok, thank you for your answer, I'll look into it. Thank you very much for your help, if something hits it, I'll write more here
SmG67 said:
Flashtool will do it, but you have to be careful.
There are some checks to be done before you go and unlock it because it can break your phone. There is a link in the kernel-thread to unlocking the bootloader, that will tell you what to look for to see if it's safe. If it is you can unlock it with flashtool.
Click to expand...
Click to collapse
Hi, thanks to your Board of everything I did, thanks again. There was yet another problem once tel after the completion of all events will go with the version E10i JBMP Release 4 (based on a E_10_2.3.62, freezes on the welcome screen in the setup first run .. anything that is not responding, phone is unavailable, unfortunately it can not connect to or pc and I can not do on the memory card to record another version of Android. tried to repeat the process but without success ... what? thank you very much
Milan 2514 said:
Hi, thanks to your Board of everything I did, thanks again. There was yet another problem once tel after the completion of all events will go with the version E10i JBMP Release 4 (based on a E_10_2.3.62, freezes on the welcome screen in the setup first run .. anything that is not responding, phone is unavailable, unfortunately it can not connect to or pc and I can not do on the memory card to record another version of Android. tried to repeat the process but without success ... what? thank you very much
Click to expand...
Click to collapse
Hi, the problem is solved .. I recorded a higher kernel version 2.3.32.61_06 and everything goes as it should . Thanks so much for your help
Hello Guys,
my question is, if I'm going to unlock the bootloader the official way (place developers sonymobile link here) will my data be gone? I know it from HTC devices that they say all data will be formatted but the tutorial by sony doesnt mention anything in that way.
So, will the phone be formatted after unlocking or nah?
Thanks!
Edit: Well I searched about 30 Minutes for something what says that the data will be deleted before i created the thread. 1 Minute after I created the thread I found the part of the Info text where it says "Unlocking the boot loader will trigger a factory reset that erases all device settings, user data, third-party applications and associated data from the device’s hardware storage"
Well, sorry for the spam lol~
Synytrix said:
Hello Guys,
my question is, if I'm going to unlock the bootloader the official way (place developers sonymobile link here) will my data be gone? I know it from HTC devices that they say all data will be formatted but the tutorial by sony doesnt mention anything in that way.
So, will the phone be formatted after unlocking or nah?
Thanks!
Edit: Well I searched about 30 Minutes for something what says that the data will be deleted before i created the thread. 1 Minute after I created the thread I found the part of the Info text where it says "Unlocking the boot loader will trigger a factory reset that erases all device settings, user data, third-party applications and associated data from the device’s hardware storage"
Well, sorry for the spam lol~
Click to expand...
Click to collapse
Hi @syntrix
Im trying to unlock boot loader mode using flashtool but all it gives me when i use the BLU is this
09/038/2016 20:38:10 - INFO - Please connect your device into flashmode.
09/038/2016 20:38:11 - INFO - Opening device for R/W
09/038/2016 20:38:11 - INFO - Reading device information
09/038/2016 20:38:11 - INFO - Phone ready for flashmode operations.
09/038/2016 20:38:11 - INFO - Current device : E2353 - YT91158958 - 1293-8832_R7A - 1296-0230_26.1.A.3.111 - GENERIC_26.1.A.3.111
09/038/2016 20:38:11 - ERROR - root : this bundle is not valid
09/038/2016 20:38:12 - INFO - Processing loader.sin
09/038/2016 20:38:12 - INFO - Checking header
09/038/2016 20:38:12 - INFO - Flashing data
09/038/2016 20:38:12 - INFO - Processing of loader.sin finished.
09/038/2016 20:38:13 - INFO - Loader : S1_Root_54c8 - Version : MSM8936_14 / Boot version : S1_Boot_MSM8939_LA2.0_37 / Bootloader status : NOT_ROOTABLE
09/038/2016 20:38:13 - INFO - Start Reading unit 000008B2
09/038/2016 20:38:13 - INFO - Reading TA finished.
09/038/2016 20:38:13 - INFO - Ending flash session
09/038/2016 20:38:13 - INFO - Your phone bootloader cannot be officially unlocked
09/038/2016 20:38:13 - INFO - You can now unplug and restart your phone
What do i do??
Also my phone cannot connect to wifi and when it does it shuts itself off and keeps restarting
Is your status in service info, Bootloader unlock allowed:Yes ?
I have sony xperia z2, and i want to unlock bootloader. I checking my phone status rooting for unlock bootloader is (YES). Try to unlock with Sony Mobile Flasher (Latest).
When insert Code for IMEI, the log show
FAILED (remote:Command did not succeed)
WARN Maybe the OEM is not enable.
How do i fix this.
I already turn on Developers Mode on Setting