trying to install CWM 6.0.4.5 from 6.0.2.7 in order to install CM11.
tried 6.0.2.7 w/ CM13 and it kicks back all sorts of errors and crashes want to try 11 but can't seem to get it or any of the prerequisites to install.
i am officially lost and need help.
i need to go from cwm 6.0.2.7 to at least 6.0.4.5 to install cm11 then i need to get cm11 installed.
i need links to correct files and a tutorial to upgrade.
thanks
kc8gpd said:
trying to install CWM 6.0.4.5 from 6.0.2.7 in order to install CM11.
tried 6.0.2.7 w/ CM13 and it kicks back all sorts of errors and crashes want to try 11 but can't seem to get it or any of the prerequisites to install.
i am officially lost and need help.
i need to go from cwm 6.0.2.7 to at least 6.0.4.5 to install cm11 then i need to get cm11 installed.
i need links to correct files and a tutorial to upgrade.
thanks
Click to expand...
Click to collapse
Go here. You can't do better for clear instructions. I used them for CM 12, but I'm sure CM 11 will work also.
nmyshkin said:
Go here. You can't do better for clear instructions. I used them for CM 12, but I'm sure CM 11 will work also.
Click to expand...
Click to collapse
thank you,
worked like a charm, loaded cwm 6.0..4.5 and then cm11 and everything is working as it should even the play store.
should have just posted in the first place
been fighting this thing for a week.
Related
I decided to install the new CM 10.2 with its 4.3 android today. In the guide I was using it also said to install AJK kernel so I did
and now I have everything working except ROOT permissions. And I can't figure out what did I do wrong. Here are the steps I took expecting to have my phone rooted and with cm 10.2 at the end:
1. I installed the new kernel by their official instructions in recovery mode
2. Installed SuperSU in recovery
3. Installed CM 10.2 in recovery
4. Installed GAPPS in recovery
5. rebooted phone
Could you please tell me what am I missing or what did I do wrong? I already rooted my phone before so I can't seem t figure out what am I doing wrong now.
Any help is much appreciated, thank you all.
warriotox said:
I decided to install the new CM 10.2 with its 4.3 android today. In the guide I was using it also said to install AJK kernel so I did
and now I have everything working except ROOT permissions. And I can't figure out what did I do wrong. Here are the steps I took expecting to have my phone rooted and with cm 10.2 at the end:
1. I installed the new kernel by their official instructions in recovery mode
2. Installed SuperSU in recovery
3. Installed CM 10.2 in recovery
4. Installed GAPPS in recovery
5. rebooted phone
Could you please tell me what am I missing or what did I do wrong? I already rooted my phone before so I can't seem t figure out what am I doing wrong now.
Any help is much appreciated, thank you all.
Click to expand...
Click to collapse
go to setting-->about phone-->click multiple times on cynogenmod mod 10.2 then a popup msg appear after that go to devloper option then select root may be ur root disable just check apps+adb now your phone easily access rooted apps
If I help you then hit a thanks button
gauravgymnast08 said:
go to setting-->about phone-->click multiple times on cynogenmod mod 10.2 then a popup msg appear after that go to devloper option then select root may be ur root disable just check apps+adb now your phone easily access rooted apps
If I help you then hit a thanks button
Click to expand...
Click to collapse
Wow. Thank's dude. I'm sure I didn't have to do this before, so weird. Thank you so much
I am having a hard time finding a CWM v6.x for Acclaim. Been trying to get it here:
goo.im/devs/succulent/acclaim/recovery
Most the links are broken and those that work give corrupt files. Is the site permanently broken? Anybody have a good link?
I currently have v5.0.2.8 with CM 10.1 but it does not seem to be capable of installing CM v10.2.
Like that perhaps: http://forum.xda-developers.com/showthread.php?t=1640958?
Might also want to try the links at http://iamafanof.wordpress.com/category/recovery-2/: some of the earlier 6.0.2.x versions are not on goo.im and therefore should be accessible.
ETM said:
I am having a hard time finding a CWM v6.x for Acclaim. Been trying to get it here:
goo.im/devs/succulent/acclaim/recovery
Most the links are broken and those that work give corrupt files. Is the site permanently broken? Anybody have a good link?
I currently have v5.0.2.8 with CM 10.1 but it does not seem to be capable of installing CM v10.2.
Click to expand...
Click to collapse
Yep, the older CWMs mentioned the most are no good for current use, it seems. I ended up flashing TWRP on top of CWM, and I was finally able to install CM10.1 and newer without bootlooping (that flash bootloop fix wasn't any good, either).
I've had no luck doing the repartition due to lack of proper adb support within CWM...adb works with TWRP, but it doesn't have the tools to repartition. Now I'm going back to a newer CWM, hoping one will have adb support and the necessary tools. Yesterday I found someone's Nook Tablet tools/roms/recoveries repository linked on one of the other android sites, but I didn't save the top level directory, so all I have is this: https://docs.google.com/folderview?pli=1&id=0B0pqBNpVw4UUeHlyYXhkYkZucmc
Please post if anyone knows of the top level directory...I want those recoveries.
You should try Goo.im again, it is working albeit a bit intermittently.
Succulent's repo: http://goo.im/devs/succulent/acclaim/recovery
Meghd00t's repo: http://goo.im/devs/meghd00t
ETM said:
I am having a hard time finding a CWM v6.x for Acclaim. Been trying to get it here:
goo.im/devs/succulent/acclaim/recovery
Most the links are broken and those that work give corrupt files. Is the site permanently broken? Anybody have a good link?
I currently have v5.0.2.8 with CM 10.1 but it does not seem to be capable of installing CM v10.2.
Click to expand...
Click to collapse
I'm using CWM 6.0.2.9 for Acclaim from Succulent's goo.im. I have difficulty with TWRP on the NT, it requires multiple touches and is just all-around weird acting. CWM works great with no problems for me.
I followed the thread Wurstwarenfachverkäuferin recommended and downloaded:
four-nineteen.com/veronica/XDA%20Developers/Nook%20Tablet/RECOVERIES/CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip
Booted to the already installed CWM v5.0.2.8 using the Power/Home button combo.
Installed the above zip from SD card.
Re-booted to CWM v6.0.1.2
Tablet now accepts CWM 10.2
------------- SOLVED! --------------
Hello all,
First of all I want to say I'm pretty new to flashing ROMs etc.
Currently I'm at stock 4.3 Jellybean and I want to flash my SGS3 to the new CM 11 ROM.
I rooted my phone following this tutorial: vvvvvv.telefoonrooten.nl/samsung/samsung-galaxy-s3-root/ (sorry if its in Dutch, but it uses the CF-Root-SGS3-v6.3 and Odin).
After I rooted I copied both the CM11 ROM and GAPPS to my external SD, I went to recovery and tried to install the new custom ROM but I got an error (status 7) and it was aborted.
Also if I try to reboot it won't boot normally as it should be but it goes back to recovery mode automatically...
I fixed to get back to Jellybean by flashing the stock rom (unrooting?) it via Odin.
Anyone else got the exact same problem as I do and knows a solution to be able to flash CM 11?
Thanks in advance,
Steelbear
Steelbear said:
Anyone else got the exact same problem as I do and knows a solution to be able to flash CM 11?
Click to expand...
Click to collapse
please read the thirst post in a rom/kernel/whatever thread. and maybe if you havent done it already you should also read the stickies in general section.
FAQ (Read before post !!)
- If you obtain Error 7 when you tried to install ROM in CWM or TWRP
Install the latest version of CMW or TWRP
Click to expand...
Click to collapse
BTW latest philz touch recovery works too
Since you went back to stock and you already know how to root, I suggest you go to Play Store and download ROM Manager to help you install latest CWM recovery on your device.
Or you can simply go to CWM website, pick the version of the recovery for your phone and flash it via Odin.
Hope it helps.
Steelbear said:
Hello all,
First of all I want to say I'm pretty new to flashing ROMs etc.
Currently I'm at stock 4.3 Jellybean and I want to flash my SGS3 to the new CM 11 ROM.
I rooted my phone following this tutorial: vvvvvv.telefoonrooten.nl/samsung/samsung-galaxy-s3-root/ (sorry if its in Dutch, but it uses the CF-Root-SGS3-v6.3 and Odin).
After I rooted I copied both the CM11 ROM and GAPPS to my external SD, I went to recovery and tried to install the new custom ROM but I got an error (status 7) and it was aborted.
Also if I try to reboot it won't boot normally as it should be but it goes back to recovery mode automatically...
I fixed to get back to Jellybean by flashing the stock rom (unrooting?) it via Odin.
Anyone else got the exact same problem as I do and knows a solution to be able to flash CM 11?
Thanks in advance,
Steelbear
Click to expand...
Click to collapse
I had the same problem the fix is quite easy
flash the latest CWM 6.0.4.4 and flash cm11 it will work fine
Blackwolf10 said:
I had the same problem the fix is quite easy
flash the latest CWM 6.0.4.4 and flash cm11 it will work fine
Click to expand...
Click to collapse
Indeed it worked! I found it out myself yesterday. Went to the CWM site and downloaded the latest version (6.0.4.4.) and flashed it through Odin. But thanks for your input anyways (to all who replied) !
An alternative solution that I often use is to open the Updater Script in META-INF folder in the ROM's zip and delete first lines, where it gets device model as property.
Obviously it's an UNSAFE operation (because that lines avoid to install ROMs of other phone on mine) but when I'm sure that ROM I've downloaded is for my phone I do it and it works
Hello,
I want to mess around with WinSuk's great work (and the androidarmv6 team), but I'm a bit lost with recoveries.
I can't check right now, but I think the phone currently has 4EXT, or maybe an old CWM.
I've always used CWM, but I've been trying TWRP on my Moto G for a while and I like it better I think.
Will this TWRP 2.2.2.0 http://forum.xda-developers.com/showthread.php?t=1886046 work?
Do I absolutely need this CWM 6.0.2.8 http://forum.xda-developers.com/showthread.php?t=2474662?
Or is this one http://download.androidarmv6.org/_builds/liberty/recovery-liberty.img more up to date?
Thanks!
Edit:
I have tried all of them, and I cannot seem to install cm-11-20140726-NIGHTLY-liberty.zip
E:Error in /sdcard/cm-11-20140726-NIGHTLY-liberty.zip
(Status 0)
I have wiped and formatted everything before trying, I have also tried with cm-11-20140725-NIGHTLY-liberty.zip, I checked the md5sum both on my disk and on the phone, everything is ok.
It did work once, I think it was with the recovery linked in the thread, but then flashing gapps gave the same error.
Djon_ said:
It did work once, I think it was with the recovery linked in the thread, but then flashing gapps gave the same error.
Click to expand...
Click to collapse
I tried again with everything, and I was able to install the ROM with the recovery from androidarmv6.
But now it gives me the same error for the gapps, complaining about /misc missing in the logs.
Well I finaly did it!
Installed cm-11-20140726-NIGHTLY-liberty.zip with recovery-liberty.img from androidarmv6 and gapps-4.4-tocache-20140605.zip with cwm-6.0.2.8-UNOFFICIAL-liberty.zip.
It's still booting, and I haven't tested TWRP but the thread is more than one year old so I probably won't.
I was only able to flash the CM11 Nightlies using the recovery-liberty.img from androidarmv6.org builds, but as of 9/6/2014 it seems to no longer be there.
I also found that flashing CM11 Nightlies required that version of recovery, but in order to flash gapps, I needed to use 6.0.2.8 from WinSuk, otherwise I would get an error.
Hi, I am new to the whole jailbreaking. I followed this video (hZyfWpBJpiE) to root the tablet (6 gb).
In this process, I used NT16or8gbV47SDimagefile and I set the tablet to factory setting, deleted partitions, and deleted dalvik cache. I may have repeated this process because i thought it wasnt rooted because my screen looked different from the video guys tablet
Then followed this video (GZAQpeCtFi0) to install CWM Recovery 4.0.4.8. It booted to the recovery setting screen but I started seeing green lines to the right of my screen then it shut off to restart.
It wouldnt respond when I tried it again so I repeated the first process and tried again but still, same thing happens.
Does anyone have ideas on how to fix this?
Ultimately, I want to install the CM11...
Thanks in Advance
I used the Root Recovery Tools to run the 4.0.4.8
PfanneKuchenAngriff said:
Hi, I am new to the whole jailbreaking. I followed this video (hZyfWpBJpiE) to root the tablet (6 gb).
In this process, I used NT16or8gbV47SDimagefile and I set the tablet to factory setting, deleted partitions, and deleted dalvik cache. I may have repeated this process because i thought it wasnt rooted because my screen looked different from the video guys tablet
Then followed this video (GZAQpeCtFi0) to install CWM Recovery 4.0.4.8. It booted to the recovery setting screen but I started seeing green lines to the right of my screen then it shut off to restart.
It wouldnt respond when I tried it again so I repeated the first process and tried again but still, same thing happens.
Does anyone have ideas on how to fix this?
...
Click to expand...
Click to collapse
You should not have deleted any partition. Also I am not aware of a CWM v4.0.4.8 for the Nook Tablet, are you sure you downloaded tools intended for the Nook Tablet?
I'd suggest that you try the recovery-to-stock method posted at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/. See http://forum.xda-developers.com/showthread.php?t=2575489 for more info/pointers.
digixmax said:
You should not have deleted any partition. Also I am not aware of a CWM v4.0.4.8 for the Nook Tablet, are you sure you downloaded tools intended for the Nook Tablet?
I'd suggest that you try the recovery-to-stock method posted at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/. See http://forum.xda-developers.com/showthread.php?t=2575489 for more info/pointers.
Click to expand...
Click to collapse
Thanks for your reply. I was able to get it back to factory setting but when following direction i get a message that says E: unable to mound /bootdata
I have no idea what is going on anymore
PfanneKuchenAngriff said:
Thanks for your reply. I was able to get it back to factory setting ...
Click to expand...
Click to collapse
Meaning you were able to get your NT back to running stock ROM?
but when following direction i get a message that says E: unable to mound /bootdata
...
Click to expand...
Click to collapse
Which direction are you referring to?
digixmax said:
Meaning you were able to get your NT back to running stock ROM?
Which direction are you referring to?
Click to expand...
Click to collapse
I was able to get back to running stock ROM. Then I followed the other linke ttp://forum.xda-developers.com/show....php?t=2575489
After I went through the directions, I got the unable to mount error
Which version of recovery did you use?
digixmax said:
Which version of recovery did you use?
Click to expand...
Click to collapse
I rooted the NT with: NT16or8gbV47SDimagefile.img
I used this version: flashable_CWM_6.0.4.8_chrmhoffmann
And I have these to install:
cm-11-20141102-NIGHTLY-acclaim
gapps-kk-20140606-signed
I think I tried 3 different ways to install it...do I need both TWRP and CMW recovery?
I read that TWRP was buggy and when it didn't work, I tried CMW recovery.
Right now, I have the NT back to rooted stated and nothing else. I followed this direction last, I think:
http://forum.xda-developers.com/showthread.php?t=2692403
The other video said I can use the root flasher app to run the CMW recovery so I tried that as well
Thanks
PfanneKuchenAngriff said:
I rooted the NT with: NT16or8gbV47SDimagefile.img
I used this version: flashable_CWM_6.0.4.8_chrmhoffmann
And I have these to install:
cm-11-20141102-NIGHTLY-acclaim
gapps-kk-20140606-signed
I think I tried 3 different ways to install it...do I need both TWRP and CMW recovery?
I read that TWRP was buggy and when it didn't work, I tried CMW recovery.
Right now, I have the NT back to rooted stated and nothing else. I followed this direction last, I think:
http://forum.xda-developers.com/showthread.php?t=2692403
The other video said I can use the root flasher app to run the CMW recovery so I tried that as well
Thanks
Click to expand...
Click to collapse
Since your NT is running (rooted) stock, you'd need SD-based recovery to flash CM/Gapps onto EMMC. Flashing CM11 requires CWM version later than 6.0.4.5 or TWRP version later than 2.6.3.0, unfortunately there does not seem to be any compilation of SD-based CWM versions 6.0.4.5 or later for the Nook Tablet, hence we are stuck with TWRP 2.6.3.0+ as the only SD-based recovery for flashing CM11 onto the NT. (The flashable_CWM_6.0.4.8_chrmhoffmann is for flashing CWM 6.0.4.8 onto your NT EMMC to replace the stock recovery; the root flasher app recovery is likely a too old recover version to be compatible with CM11).
A potential alternative course of action is to first flash CM10.x for which there are SD-based CWM recovery available (see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163), then upgrade from CM10.x to CM11 (see http://forum.xda-developers.com/showthread.php?t=2670589).
digixmax said:
Since your NT is running (rooted) stock, you'd need SD-based recovery to flash CM/Gapps onto EMMC. Flashing CM11 requires CWM version later than 6.0.4.5 or TWRP version later than 2.6.3.0, unfortunately there does not seem to be any compilation of SD-based CWM versions 6.0.4.5 or later for the Nook Tablet, hence we are stuck with TWRP 2.6.3.0+ as the only SD-based recovery for flashing CM11 onto the NT. (The flashable_CWM_6.0.4.8_chrmhoffmann is for flashing CWM 6.0.4.8 onto your NT EMMC to replace the stock recovery; the root flasher app recovery is likely a too old recover version to be compatible with CM11).
A potential alternative course of action is to first flash CM10.x for which there are SD-based CWM recovery available (see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163), then upgrade from CM10.x to CM11 (see http://forum.xda-developers.com/nook-hd/general/how-to-updating-hd-hd-internal-emmc-to-t2863171).
Click to expand...
Click to collapse
I think I was able to get through the first step in loading cm 10...
Is it normal for cyanoboot to show up before the cyanogenmod flash??
If normal, I will try to upgrade to cm11. This is a huge improvement though Thanks!
PS. the update from CM10x to CM11 seems to be only for HD or HD+...would this work with NT?
PfanneKuchenAngriff said:
I think I was able to get through the first step in loading cm 10...
Is it normal for cyanoboot to show up before the cyanogenmod flash??
Click to expand...
Click to collapse
Yes
PS. the update from CM10x to CM11 seems to be only for HD or HD+...would this work with NT?
Click to expand...
Click to collapse
Sorry, the correct URL for the NT CM10.x to CM11 update is http://forum.xda-developers.com/showthread.php?t=2670589.
digixmax said:
Yes
Sorry, the correct URL for the NT CM10.x to CM11 update is http://forum.xda-developers.com/showthread.php?t=2670589.
Click to expand...
Click to collapse
Thanks so much for all your help! For this step do I upload the files straight into the device (not the SD card)? Also, do i use the flashable_CWM_6.0.4.5_chrmhoffmann.zip or could I use the 6.0.4.8?
PfanneKuchenAngriff said:
Thanks so much for all your help! For this step do I upload the files straight into the device (not the SD card)?
Click to expand...
Click to collapse
Either way would work.
Also, do i use the flashable_CWM_6.0.4.5_chrmhoffmann.zip or could I use the 6.0.4.8?
Click to expand...
Click to collapse
Your choice.
FWIW I am using 6.0.4.8 on my NT (running CM11 snapshot M12).