I need the firmware or ROM for LS 4505 Flame 8 mobile. I am unable to find it anywhere. It's not booting after I installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
i want to root too
hey buddy i cant help you but you can help me by telling how to root flame 8 and get super su etc
Lol! Ok you can root it by downloading latest kingroot app. Just install and run. It will guide you through the process. Make sure its version 4.9.6 which is the latest one.
Sent from my SM-G900H using Tapatalk
DONE IT
I TRIED YESTERDAY AND FAILED AFTER YOU SAID I TRIED AGAIN FAILED THEN I BRING DOWN THE NOTIFICATION PANEL WHILE ROOTING ANDONE BUT BUDDY NOW I WNT SUpERSU buddy i want to lock my flame 8 to band 40 plz hlp
Dont know abiut locking on to band 40. But dont install supersu app just yet. It have some compatibility issues with this phone at the moment and it will put ur phone in bootloop.
Just use the default kingroot app to manage your root access for now.
Sent from my SM-G900H using Tapatalk
yeah
even with kingroot i managed to get band 40 but the network is not good only speed id good
i want LS-4505 flame 8 custom rom , so please give me it .
pankajbhol94 said:
i want LS-4505 flame 8 custom rom , so please give me it .
Click to expand...
Click to collapse
We are all waiting for the same. Still no luck.
Sent from my SM-G900H using Tapatalk
Help needed in Rooting Flame 8
Hi,
I have downloaded the latest kingroot and tried to root Flame 8. Could you please tell any specific steps to be done before rooting Flame 8 using kingRoot?
If you have any updates,Plz update to [email protected] with any specific links or steps to taken for rooting.
Ps: King Root and Kingo Root both from PC and mobile failed for me.
redhotiron2004 said:
I need the firmware or ROM for LS 4505 Flame 8 mobile. I am unable to find it anywhere. It's not booting after I installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
Click to expand...
Click to collapse
Hi,
Same thing happened for me too..did I resolve the boot loop..if yes, plz help me...
Mail:[email protected]
vygavedha said:
Hi,
Same thing happened for me too..did I resolve the boot loop..if yes, plz help me...
Mail:[email protected]
Click to expand...
Click to collapse
Hi, I finally went LYF store and restored the Stock .Never say that we have rooted,just tel them you have taken update and it is not booting up. Make sure that you have done a factory reset from fastboot mode before visiting LYF store
Lyf Flame 8 LS-4505
I want custom rom for marshmallow also nougat for lyf flame 8 ls4505 . plz create cm and provide me how to bootloader unlock for this mobile . i want for a root and also try old nd new vrsn of kingroot but rooting faild . plz help nd any suggest . thx 4 advnc :good:
Novita2 said:
I want custom rom for marshmallow also nougat for lyf flame 8 ls4505 . plz create cm and provide me how to bootloader unlock for this mobile . i want for a root and also try old nd new vrsn of kingroot but rooting faild . plz help nd any suggest . thx 4 advnc :good:
Click to expand...
Click to collapse
I have rooted using KingRoot 4.8 in this model. Other versions of kingRoot didn't work for me..
Also never try to replace kingRoot with superSu since it leads to boot loop.I have tried this and finally went to Jio store to flash the stock for my bricked flame 8
Unbrick LYF FLAME 8 ls-4505
My flame 8 got rooted using kingroot (latest version from official site).
When I installed supersume app to install super su ,my phone got bricked. Not even booting into the system.
Then I could download the official firmware from the link: docs.google.com/uc?id=0B672QBSaJWBAWmtPaUNXTXVyR2c&export=download
Here are the steps;
Extracting the file, you'll get Qualcomm drivers,qpst n flash file folder.
Install drivers and qpst.
Then switch off the device (ls-4505) and replug the battery.
Then hold volume up+volume down+power button all together till your phone vibrates.
Then connect your device to PC and make sure the device is listed as HS-QDload.....something with a COM port in both device manager and qpst configuration.
Then open QFil and select the respective port and load mbn file (which looks like 'prog_emmc_firehose_89XX.mbn') in programmer patch section.
Then load XML files rawprogram0.xml and patch0.xml one by one.
Then click download. The process will be completed in 10 minutes. There you go with stock unbricked Flame 8. Device warranty also be restored.
##PossibleErrors:
1. rawprogram0.xml error;
then you can use file unparsedrawprogram without qcn.xml and patch0.xml instead.
Don't use unparsedrawprogram.xml, because it will wipe your qcn data(imei,WiFi Mac....)
2. QFil error;
then you can download latest version from here link: boycracked.com/portfolio/download-qpstools-flasher-for-qualcomm-chipset/
Good luck
Stock rom for lyf flame 8 4505
redhotiron2004 said:
i need the firmware or rom for ls 4505 flame 8 mobile. I am unable to find it anywhere. It's not booting after i installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
Click to expand...
Click to collapse
firmware uploaded guys...just google it
Anyone tried this porting?
redhotiron2004 said:
I need the firmware or ROM for LS 4505 Flame 8 mobile. I am unable to find it anywhere. It's not booting after I installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
Click to expand...
Click to collapse
Same here.....
I went to the LYF Service Center and got it worked
---------- Post added at 07:05 AM ---------- Previous post was at 06:58 AM ----------
VivCham said:
Same here.....
I went to the LYF Service Center and got it worked
Click to expand...
Click to collapse
Ahammed Danish said:
My flame 8 got rooted using kingroot (latest version from official site).
When I installed supersume app to install super su ,my phone got bricked. Not even booting into the system.
Then I could download the official firmware from the link: docs.google.com/uc?id=0B672QBSaJWBAWmtPaUNXTXVyR2c&export=download
Here are the steps;
Extracting the file, you'll get Qualcomm drivers,qpst n flash file folder.
Install drivers and qpst.
Then switch off the device (ls-4505) and replug the battery.
Then hold volume up+volume down+power button all together till your phone vibrates.
Then connect your device to PC and make sure the device is listed as HS-QDload.....something with a COM port in both device manager and qpst configuration.
Then open QFil and select the respective port and load mbn file (which looks like 'prog_emmc_firehose_89XX.mbn') in programmer patch section.
Then load XML files rawprogram0.xml and patch0.xml one by one.
Then click download. The process will be completed in 10 minutes. There you go with stock unbricked Flame 8. Device warranty also be restored.
##PossibleErrors:
1. rawprogram0.xml error;
then you can use file unparsedrawprogram without qcn.xml and patch0.xml instead.
Don't use unparsedrawprogram.xml, because it will wipe your qcn data(imei,WiFi Mac....)
2. QFil error;
then you can download latest version from here link: boycracked.com/portfolio/download-qpstools-flasher-for-qualcomm-chipset/
Good luck
Click to expand...
Click to collapse
Can i install Xposed framework in LS4505 ??? Have anybody tried?????
VivCham said:
Same here.....
I went to the LYF Service Center and got it worked
---------- Post added at 07:05 AM ---------- Previous post was at 06:58 AM ----------
Can i install Xposed framework in LS4505 ??? Have anybody tried?????
Click to expand...
Click to collapse
I couldn't find a custom recovery for the device yet. Hence I don't think it is able to install Xposed framework in the device.
Ahammed Danish said:
I couldn't find a custom recovery for the device yet. Hence I don't think it is able to install Xposed framework in the device.
Click to expand...
Click to collapse
As far as I know, you don't actually need custom recovery for the xposed framework to work. Its needed in case something goes wrong.
The framework itself is just an app that anyone can install if you have root access. After that you would need to activate the exposed framework from inside the app itself. Its not compulsory to install recovery.
Sent from my SM-G900H using Tapatalk
redhotiron2004 said:
As far as I know, you don't actually need custom recovery for the xposed framework to work. Its needed in case something goes wrong.
The framework itself is just an app that anyone can install if you have root access. After that you would need to activate the exposed framework from inside the app itself. Its not compulsory to install recovery.
Click to expand...
Click to collapse
Then I'll check it in my flame 8 :angel:
Related
I want help from devs... There is no option to root my oppo A37.. I tried all apps and tricks... Can any dev help to root this phone?
Up
sagargjasani264 said:
I want help from devs... There is no option to root my oppo A37.. I tried all apps and tricks... Can any dev help to root this phone?
Click to expand...
Click to collapse
My thread should help u out
http://forum.xda-developers.com/android/general/root-guide-t3461054
it does not work
KingWilliams said:
My thread should help u out
http://forum.xda-developers.com/android/general/root-guide-t3461054
Click to expand...
Click to collapse
Doesn't worked for me too
adel pro said:
it does not work
Click to expand...
Click to collapse
sagargjasani264 said:
Doesn't worked for me too
Click to expand...
Click to collapse
So u both tried all the available methods? With and without PC? I doubt that...anyways If u have tried then then I can't help u out with that as everything possible is in my thread ..u will have to wait until u get a suitable method to root ur device
up
Sir! Please kindly help me i am your big fan and always use your tricks so i had a oppo a 37 i want to root it and flash twrp recovery i have tried all the ways to root but all failed please help me i and 10000 oppo user will get satisfied i have seen on oppo comunity page all are to them how to root but they are not telling help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@sagargjasani264 @Yashraj22 @
For rooting you can use Kingroot Latest 5.0 it works ! i used it on my oppo a37f and there is no solution for a twrp for oppo a37f yet because it doesn't have fastboot
Thank you so much bro.. I have moved to oppo f1s.. But kingroot 5.0 worked for me...
There is many ways you can make custom recovery.. U will find forums to port recovery...
sagargjasani264 said:
There is many ways you can make custom recovery.. U will find forums to port recovery...
Click to expand...
Click to collapse
but can someone make a custom recovery for oppo a37 ? no one is doing it ... i tried once but it didn't boot ... and our phone doesn't have fastboot binarys so we can't unlock its bootloader ...... we are stuck
my phone not start.
when i reinstall custom rom ios9.1 to another rom in my micromax q380 when my goto recovery mode and then my screen become yellow and start blink and phone not start yellow screen continue blink what i do now.tell me its veryurgent
hamzachaudhry36 said:
but can someone make a custom recovery for oppo a37 ? no one is doing it ... i tried once but it didn't boot ... and our phone doesn't have fastboot binarys so we can't unlock its bootloader ...... we are stuck
Click to expand...
Click to collapse
I am also trying to make a custom recovery for my oppo f1s.. So if i get succed then same procedure can be used to make recovery for a37..
sagargjasani264 said:
I am also trying to make a custom recovery for my oppo f1s.. So if i get succed then same procedure can be used to make recovery for a37..
Click to expand...
Click to collapse
Yeah both have ColorOS 3.0(so no fastboot binarys).... PLEASE inform me as soon as you succeed at making your recovery ....
I tried to port from Xiaomi Redimi 2 which is very similar to Oppo a37f but in the end that twrp didn't boot up.....
The first thing is to unlock bootloader, which you can try to make files like in this article HERE
(referring to Magictricks by uberlaggydarwin)
Then we'll have to install custom recovery and then make a custom rom to get full fastboot option and completely unlocked..!!!
Sir i have installed kingroot and rooted successfully and replaced it wiyh supersu then anything went wrong and i wiped my phone and reflashed firmware but now when i install kingroot it says "cannot install package error" i have downloaded it from every website but it is not fixed help. Please
Yashraj22 said:
Sir i have installed kingroot and rooted successfully and replaced it wiyh supersu then anything went wrong and i wiped my phone and reflashed firmware but now when i install kingroot it says "cannot install package error" i have downloaded it from every website but it is not fixed help. Please
Click to expand...
Click to collapse
Flash stock rom and try again
Flashed 5 times and tried
---------- Post added at 02:03 PM ---------- Previous post was at 01:54 PM ----------
Helppp
Help
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Hi! Im new here. Juz wanna ask can I change my Honor 7 charging animation to smthng else? Or is it fix already? N if yes, where can i download the template?
Hi !
I have a Honor 7 PLK-L01 with official EMUI 4.0.1 (Android 6.0).
Which version of SuperSU work with my phone to root it ? (with the download link)
Thank you !
Hi!
Is it possible to enable notification led while "do not disturb" mode is on? Since the B380 update it isn't blinking at night :/
InfinityOfficial said:
Hi !
I have a Honor 7 PLK-L01 with official EMUI 4.0.1 (Android 6.0).
Which version of SuperSU work with my phone to root it ? (with the download link)
Thank you !
Click to expand...
Click to collapse
Huv u rooted ur device ? If so follow this thread :
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
If u havent do so then follow this thread instead :
https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Hope tht helps u?
Winter Nai said:
Huv u rooted ur device ? If so follow this thread :
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
If u havent do so then follow this thread instead :
https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Hope tht helps u
Click to expand...
Click to collapse
My phone was rooted before that i change the ROM (B180 to B380).
When i have update my phone the root is gone.
I have retry to root it, so i have already unlock the bootloader and put a custom recovery (TWRP).
But when i flash SuperSu my phone bootloop.
I was try a lot of versions of SuperSu but all do bootloop my phone except one but the SIM and SD port doesn't work.
is there root for honor 7 lite?
Winter Nai said:
Hi! Im new here. Juz wanna ask can I change my Honor 7 charging animation to smthng else? Or is it fix already? N if yes, where can i download the template?
Click to expand...
Click to collapse
Unfortunately you can't change charging animation at the moment.
InfinityOfficial said:
Hi !
I have a Honor 7 PLK-L01 with official EMUI 4.0.1 (Android 6.0).
Which version of SuperSU work with my phone to root it ? (with the download link)
Thank you !
Click to expand...
Click to collapse
thelous said:
is there root for honor 7 lite?
Click to expand...
Click to collapse
Root is available, the latest SuperSU 2.79 will work well. Here's a tutorial to root your device:
https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
InfinityOfficial said:
My phone was rooted before that i change the ROM (B180 to B380).
When i have update my phone the root is gone.
I have retry to root it, so i have already unlock the bootloader and put a custom recovery (TWRP).
But when i flash SuperSu my phone bootloop.
I was try a lot of versions of SuperSu but all do bootloop my phone except one but the SIM and SD port doesn't work.
Click to expand...
Click to collapse
Potato997 said:
Root is available, the latest SuperSU 2.79 will work well. Here's a tutorial to root your device:
https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Click to expand...
Click to collapse
Huv u try out this fix? Does it solve ur problem? I'm not a dev or a modder but i suggest u to reset ur phone (from TWRP, tick all boxes in wipe section EXCEPT for internal storage and sd card as it will DELETE ALL UR PHONE DATA unless u know what u r doing ) and reroot your device if needed (ensure tht bootloader and twrp is working fine). Flash ur ROM n after tht, install SuperSu by downloading it from Google Play. It's easier btw (ensure ur ROM huv Gapps install or juz download from http://opengapps.org/)
For ur sim and sd card problem, try to scan and fix it using apps from Google Play like Phone Doctor Plus or etc. Consider also to ask the developer of ur ROM tht whether there are such issues(if it's a stock rom, make sure u download is the full update not OTA). If the problem persist, u maybe huv to spend a few bucks (if not under warranty) on ur hardware problem It may due to hardware issues.
I would like to warn u tht I ll not be responsible for any problems tht happen. So, u huv to take the risk of bricking ur phone by urself (hopefully no). If the methods above failed, try to post this matter into other threads, maybe a dev can solve this matter better 4 u Report here back to tell about the fix.
ps: anyone knows how to attach a pic without the website link? newbie here xox
Bump
Sent from my Motorola XT1080 using XDA Labs
PoseidonKing said:
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Click to expand...
Click to collapse
Hello everyone !
I have a plk l01 b390 and i tried to root so I unlocked the bootloader (but it didn't preform a factory reset as I learned from tutorials )flashed TWRP with fastboot (bootloader shown unlock on device)
Everything was good so I installed SuperSU(2.62) via TWRP when I reboot "no su binary installed" flashed (2.79) still no root
-Why I can't root?
-why get this message on ADB "failed no remote access"
Plz help:crying: and thanks in advance:good:
AMINEvsAMN said:
Hello everyone !
I have a plk l01 b390 and i tried to root so I unlocked the bootloader (but it didn't preform a factory reset as I learned from tutorials )flashed TWRP with fastboot (bootloader shown unlock on device)
Everything was good so I installed SuperSU(2.62) via TWRP when I reboot "no su binary installed" flashed (2.79) still no root
-Why I can't root?
-why get this message on ADB "failed no remote access"
Plz help:crying: and thanks in advance:good:
Click to expand...
Click to collapse
Did you makr a backup before flashing?
adriansticoid said:
Did you makr a backup before flashing?
Click to expand...
Click to collapse
I did a backup with TWRP but I downloaded latest full ota update using firmware finder and the Huawei update extractor before I flashed(just in case)
Help anybody
AMINEvsAMN said:
Help anybody
Click to expand...
Click to collapse
About what??
hassanjavaid8181 said:
About what??
Click to expand...
Click to collapse
If you only read a few post above you'll know his problem.
Boot loop?
I tried to root my Honor 7 plk-l01 and when i installed supersu and rebooted my device it just got stuck on screen where is just honor and it is not going anywhere, any help please
aleks_26 said:
I tried to root my Honor 7 plk-l01 and when i installed supersu and rebooted my device it just got stuck on screen where is just honor and it is not going anywhere, any help please
Click to expand...
Click to collapse
You didn't take a TWRP backup?
aleks_26 said:
I tried to root my Honor 7 plk-l01 and when i installed supersu and rebooted my device it just got stuck on screen where is just honor and it is not going anywhere, any help please
Click to expand...
Click to collapse
Did you make any backup with twrp??
hassanjavaid8181 said:
Did you make any backup with twrp??
Click to expand...
Click to collapse
I dont think so, but now i fixed the boot loop but My memory alla disappeared, my device hae 32Gb memory and now it says i Have about 4Gb of memory
Hello,
I have Rooted my device and Now want to flash a Lineage OS or AOSP.
Can any body port me a ROM.?
Bornstud said:
Hello,
I have Rooted my device and Now want to flash a Lineage OS or AOSP.
Can any body port me a ROM.?
Click to expand...
Click to collapse
How did you root it in the first place??... The method described here isn't working for me, no root tool is able to do so, how did u do it???...
Zlatanera166 said:
How did you root it in the first place??... The method described here isn't working for me, no root tool is able to do so, how did u do it???...
Click to expand...
Click to collapse
Search Infocus Epic1 Root Forum
You will get an answer..
In short I root my device with SuperSu..
Bornstud said:
Search Infocus Epic1 Root Forum
You will get an answer..
In short I root my device with SuperSu..
Click to expand...
Click to collapse
I tried... Phone got into red state... I had to flash the stock rom again... Any useful link...
It seems you have not flashed Correct boot image file or not have ticked against OEM unlock under developer option.
Plz check latest boot image file u r flashing
Currently u file that have been on forum is for Version IN360.
Check Your Version.
Zlatanera166 said:
How did you root it in the first place??... The method described here isn't working for me, no root tool is able to do so, how did u do it???...
Click to expand...
Click to collapse
Bro infocus epic 1 can be rooted by TWRP and super su
dvcspiderman said:
Bro infocus epic 1 can be rooted by TWRP and super su
Click to expand...
Click to collapse
Which version of TWRP... If u have any links to share...
Infocus epic 1
My Infocus epic 1 has been bricked. I have tried to flash with SUT tool, but SUT says the "nb0" file (which is downloaded from the trusted "firmware file.com") IS CORRUPTED, and exits.
I can't find a good file from any site.
CAN ANYONE HELP ME TO SOLVE THIS PROBLEM?
Same To Me But Iam Install TWRP By XDA Website And Tha TWRP Not Installed Correctly And Reinstalled Then I Turn on My Phone It Only Boot into TWRP There are No OS On My Device
I found A Solution
gunasekaranc said:
My Infocus epic 1 has been bricked. I have tried to flash with SUT tool, but SUT says the "nb0" file (which is downloaded from the trusted "firmware file.com") IS CORRUPTED, and exits.
I can't find a good file from any site.
CAN ANYONE HELP ME TO SOLVE THIS PROBLEM?
Click to expand...
Click to collapse
Download Latest Firmware Install Tha Software In Tha Firmware it Work
I am searching the root method for a long time. However, no valid recovery file is found. I try many one click root apps but no happy ending. Please developers help.
By the way, I searched some posts here. A developer distributed a root method for C7 (SM-C7000). Is it possible to use those files to flash in C7 Pro?
foukin2 said:
I am searching the root method for a long time. However, no valid recovery file is found. I try many one click root apps but no happy ending. Please developers help.
By the way, I searched some posts here. A developer distributed a root method for C7 (SM-C7000). Is it possible to use those files to flash in C7 Pro?
Click to expand...
Click to collapse
Thanks for brining this up. I am only looking for the best place to download the HK version of the firmware. not on sammobile site that I used to use. I don't need to root or rom, just want to change the firmware from CN to HK. Any ideas.
I don't have the phone at the moment, but will help my colleague sort it out at the end of June when I am less busy.
I did find this site that may have a solution for you though: https://www.skyneel.com/root-samsung-galaxy-c7-pro-sm-c7010
Don't know how reputable it is.
Good luck and cheers.
s327374 said:
Thanks for brining this up. I am only looking for the best place to download the HK version of the firmware. not on sammobile site that I used to use. I don't need to root or rom, just want to change the firmware from CN to HK. Any ideas.
I don't have the phone at the moment, but will help my colleague sort it out at the end of June when I am less busy.
I did find this site that may have a solution for you though: https://www.skyneel.com/root-samsung-galaxy-c7-pro-sm-c7010
Don't know how reputable it is.
Good luck and cheers.
Click to expand...
Click to collapse
Mate, I have been the site you provided before. It really shows the method but does not have the downloadable TWRP file.
I rooted early.
I rooted early by unknown metod that I created
Sorry for my bad einglish
inanloukarim said:
I rooted early by unknown metod that I created
Sorry for my bad einglish
Click to expand...
Click to collapse
how did you did it?
my root ...
neldrick said:
how did you did it?
Click to expand...
Click to collapse
download root.rar fromlink: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
enjoy from your rooted c7pro
if this usefull for you press thanks
(tested in hongkong firmware)
the twrp compiled by me bootup without problem but not mont any partition.i have family and no any time to fix it. anyone can fix it ...
sorry for my bad einglish
موفق باشید.
inanloukarim said:
download root.rar fromlink: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
enjoy from your rooted c7pro
if this usefull for you press thanks
(tested in hongkong firmware)
the twrp compiled by me bootup without problem but not mont any partition.i have family and no any time to fix it. anyone can fix it ...
sorry for my bad einglish
موفق باشید.
Click to expand...
Click to collapse
Very Useful:good::good::good:
Unofficial TWRP now available.
foukin2 said:
I am searching the root method for a long time. However, no valid recovery file is found. I try many one click root apps but no happy ending. Please developers help.
By the way, I searched some posts here. A developer distributed a root method for C7 (SM-C7000). Is it possible to use those files to flash in C7 Pro?
Click to expand...
Click to collapse
Here you go. https://forum.xda-developers.com/android/development/twrp-unofficial-twrp-3-1-0-0-samsung-t3649931
Salam karim jan dadash man wifi gooshim az kar oftad root shod twrp nasb shod vali wifi hilight mishe asan rooshan nemishe
how to improve camera quality of samsung c7 pro
https://chat.whatsapp.com/9cJICMbiF72IVejI3MR1s0
Whatsapp group for c7 else contact me on +919847851384
---------- Post added at 05:12 AM ---------- Previous post was at 05:10 AM ----------
https://chat.whatsapp.com/9cJICMbiF72IVejI3MR1s0
Else contact me on +919847851384
if u want to join whatsapp group of c7 pro than whatsapp me on 9915785252
or
join by whatsapp invite
https://chat.whatsapp.com/9cJICMbiF72IVejI3MR1s0
Help me to root my s6edge , been a year waiting but cant find a good way , btw im new here , noob too , need a big help ....
S6EDGE G925F
Build number MMB29K.G925FXXU5DQBC
OS 6.0.1
Should i upgrade to nougat first or just with this ?
I would really appreciate any helps , thanx alot in advance !
How to root using twrp ? Any guide for it bro ?
Ericnorman said:
Help me to root my s6edge , been a year waiting but cant find a good way , btw im new here , noob too , need a big help ....
S6EDGE G925F
Build number MMB29K.G925FXXU5DQBC
OS 6.0.1
Should i upgrade to nougat first or just with this ?
I would really appreciate any helps , thanx alot in advance !
Click to expand...
Click to collapse
Ypu have been waiting a year? There has been root available for s6 edge for about 2 years.
Cf autoroot or flash twrp then flash magisk or flash supersu 2.78 sr5 through twrp.
Thanx for replying again , but i dont understand any of those means n whats twrp ? Could you show me a thread of it ? Something like ultimate guide for s6edge root ?
If anyone can help me to root without bricking or tripping knox on my phone , im willing to donate $10 via paypal , thanx people , really appreciate it guys !
johngr77 said:
no way to root without tripping knox
Click to expand...
Click to collapse
This is why im still waiting , btw is it okay even we tripped the knox ? I love to play games in this phone tho , will it effect me ?
johngr77 said:
You will have problems on nougat, s health, samsung pay, android pay and other apps related to security won't work anymore if you have tripped knox, warranty will be voided too
Click to expand...
Click to collapse
Only that ? As long as im not gonna upgrade to nougat , imma be fine ?
I dont use shealth , samsung pay , android pay (is this google pay?? Coz if yes i use google wallet)
Also I hear nougat not cool , bad on charging and other thing as well , i have my nougat downloaded ota , but not yet install it (coz i dunno how to get rid of it, was accidentally pressed download)
Ericnorman said:
Only that ? As long as im not gonna upgrade to nougat , imma be fine ?
I dont use shealth , samsung pay , android pay (is this google pay?? Coz if yes i use google wallet)
Also I hear nougat not cool , bad on charging and other thing as well , i have my nougat downloaded ota , but not yet install it (coz i dunno how to get rid of it, was accidentally pressed download)
Click to expand...
Click to collapse
If i was you i would use google and search here on xda and read up about root, twrp, bootloops etc...
You can not root without tripping knox and you never will be able to.
Dont try it unless your confident with it and how to recover if it goes wrong.
callumbr1 said:
If i was you i would use google and search here on xda and read up about root, twrp, bootloops etc...
You can not root without tripping knox and you never will be able to.
Dont try it unless your confident with it and how to recover if it goes wrong.
Click to expand...
Click to collapse
May i ask how long usually rooting takes time ?
Ericnorman said:
Help me to root my s6edge , been a year waiting but cant find a good way , btw im new here , noob too , need a big help ....
S6EDGE G925F
Build number MMB29K.G925FXXU5DQBC
OS 6.0.1
Should i upgrade to nougat first or just with this ?
I would really appreciate any helps , thanx alot in advance !
Click to expand...
Click to collapse
I have the same model with build number G925FXXU5EQD6 for Android 7.0 and I downloaded cfautoroot zip and booted to Download mode and flashed the zip with Odin 3.12 by puttin it in AP and let it reboot and then just click the SuperSU icon in the app drawer and set it to Always allow root. Then install the update for SuperSU that Google Play asks you to do. Then update the su binary when prompted and say yes to disable KNOX and wait for it to say Succeeded. Now install Root Checker from Google Play and Open it and click to check if it tells you its rooted or not. You may be prompted to Allow the calling of su so just click Allow or Yes.
That's how I did anyhow.
After that, just install flashify from Google Play and flash the img for zerolte.
Ericnorman said:
May i ask how long usually rooting takes time ?
Click to expand...
Click to collapse
About 2 minutes with cf autoroot. Look at the post above mine thats the quickest way. But thats for 7.0. If you root y.0.1 its same but make sure you get the correct autoroot file
Ericnorman said:
This is why im still waiting , btw is it okay even we tripped the knox ? I love to play games in this phone tho , will it effect me ?
Click to expand...
Click to collapse
Tripping KNOX is just a way for Samsung technicians to see if you're phone has been tampered with.
A friend of mine has a law suit waiting for him from Samsung just because I somehow managed to burn the motherboard flashing the wrong zip file based on an older guide that seemed to be made to help people brick their phones.
Umeaboy said:
I have the same model with build number G925FXXU5EQD6 for Android 7.0 and I downloaded cfautoroot zip and booted to Download mode and flashed the zip with Odin 3.12 by puttin it in AP and let it reboot and then just click the SuperSU icon in the app drawer and set it to Always allow root. Then install the update for SuperSU that Google Play asks you to do. Then update the su binary when prompted and say yes to disable KNOX and wait for it to say Succeeded. Now install Root Checker from Google Play and Open it and click to check if it tells you its rooted or not. You may be prompted to Allow the calling of su so just click Allow or Yes.
That's how I did anyhow.
After that, just install flashify from Google Play and flash the img for zerolte.
Click to expand...
Click to collapse
callumbr1 said:
About 2 minutes with cf autoroot. Look at the post above mine thats the quickest way. But thats for 7.0. If you root y.0.1 its same but make sure you get the correct autoroot file
Click to expand...
Click to collapse
Omg thanx to u two , i just did my diy root and succeed lol , using cf autoroot , then i installed super su and root check , i checked its rooted , but what do i have to do with super su ? And then what else i need to do with newly root phone ? Hehe
Ericnorman said:
Thanx for replying again , but i dont understand any of those means n whats twrp ? Could you show me a thread of it ? Something like ultimate guide for s6edge root ?
Click to expand...
Click to collapse
TWRP is a custom recovery with various features that you don't get with the stock recovery.
One of these are have a Terminal to run commands in.
You can also theme the Recovery with other background pictures and what not....
---------- Post added at 03:53 PM ---------- Previous post was at 03:50 PM ----------
Ericnorman said:
Omg thanx to u two , i just did my diy root and succeed lol , using cf autoroot , then i installed super su and root check , i checked its rooted , but what do i have to do with super su ? And then what else i need to do with newly root phone ? Hehe
Click to expand...
Click to collapse
You'll be prompted on the screen to update the su binary. Do that.
Other than that you don't need anything else besides TWRP.
I'm trying to finish the port of Lineage OS to this device and I have my own device tree on github, but it needs more developers.
I also have a defconfig to build the kernel, but I haven't found it easy to upload it to Lineage's gerrit yet.
Umeaboy said:
TWRP is a custom recovery with various features that you don't get with the stock recovery.
One of these are have a Terminal to run commands in.
You can also theme the Recovery with other background pictures and what not....
---------- Post added at 03:53 PM ---------- Previous post was at 03:50 PM ----------
You'll be prompted on the screen to update the su binary. Do that.
Other than that you don't need anything else besides TWRP.
I'm trying to finish the port of Lineage OS to this device and I have my own device tree on github, but it needs more developers.
I also have a defconfig to build the kernel, but I haven't found it easy to upload it to Lineage's gerrit yet.
Click to expand...
Click to collapse
Done with super su binary update , So i need to download twrp to my phone too now ?
What about flashify ? I need to install it too ?
Ericnorman said:
Done with super su binary update , So i need to download twrp to my phone too now ?
What about flashify ? I need to install it too ?
Click to expand...
Click to collapse
Install flashify from playstore. Grant root permission in supersu app. From flashify you can install twrp from the app.
callumbr1 said:
Install flashify from playstore. Grant root permission in supersu app. From flashify you can install twrp from the app.
Click to expand...
Click to collapse
done , then i need to do backup recovery or backup kernel ?
btw do u have any recommendation how to optimalize battery ?
Ericnorman said:
done , then i need to do backup recovery or backup kernel ?
btw do u have any recommendation how to optimalize battery ?
Click to expand...
Click to collapse
What i would do now is boot to twrp (recovery) and make a full nandroid backup. Basically it backs up absolutely everything so if anything should go wrong you can always restore. Deffinately boot to twrp and backup efs. This is your imei files. Save them externally to pc or something. If they ever corrupted its pretty impossible to repair.
As for battery optimisation ypu can try better battery stats (app) or Lspeed (app) to see whats eating your battery and you can tweak from there.
Or try a custom kernel, some are made to optimise battery and performance.
Also if you are in to your music and audio, look at viper4android. Best music fx you can get.
callumbr1 said:
What i would do now is boot to twrp (recovery) and make a full nandroid backup. Basically it backs up absolutely everything so if anything should go wrong you can always restore. Deffinately boot to twrp and backup efs. This is your imei files. Save them externally to pc or something. If they ever corrupted its pretty impossible to repair.
As for battery optimisation ypu can try better battery stats (app) or Lspeed (app) to see whats eating your battery and you can tweak from there.
Or try a custom kernel, some are made to optimise battery and performance.
Also if you are in to your music and audio, look at viper4android. Best music fx you can get.
Click to expand...
Click to collapse
Ok , for the flashify parts im confuse , could u help to assist me which button should i press ? Boot image ? Or recovery image ? If its boot image , then which folder after that ?
If its recovery , which version rwrp should i press ?
Ericnorman said:
Ok , for the flashify parts im confuse , could u help to assist me which button should i press ? Boot image ? Or recovery image ? If its boot image , then which folder after that ?
If its recovery , which version rwrp should i press ?
Click to expand...
Click to collapse
Its recovery image. Post a screenshot of flashify...