Hello,
This is my first topic here, so i don't know if am am doing something wrong.
Sometime ago i runned windows xp and 98 and tried some linux in my old galaxy s3 . In that time i found other apps to do that:
-Limbo pc emulator
libSdl (qemu)
and for running old games winulator.
The limbo's developer said in the description that the app couldn't run any windows after 98 becase of the android's storage low speed. But i could run windows xp. Now i have a galaxy s6 that has a much more faster storage, much more ram, more internal memory, much faster processor, but these apps doesn't run in my phone.
Limbo opens, i create a virtual machine but when i run it, the app just closes up and android show-me that warning that the app closed unexpectedly. Bochs opens, start to boot and a second after he opened, it just closes without any error, bochsout doesn't give nothing too and if i see in the wright time he recognizes the img's. libSdl opens, start to boot windows 98, and closes some seconds after opening, withou any error. Winulator chrashes the game when i try to run, and many people in internet says that winulator do that becase he is incompatible with the new JavaJVM.
I think that is some incompatibility of the app with my android version. My cell phone is an galaxy s6 "flat", has original ROM from samsung, recently updated to 6.0, original kernel, doesn't have root, and the apps were made to "android 2.2+".
Could anyone compile for me a version of bochs for my s6 or help-me to do that ? Or even give a link to a version that works on my phone?
Related
Hi
i have problem with first running of my android app
it s an example from Book, completely compile without any error But
i have problem in AVD, almost of time it force stop activities.
i m working in windows 7 - 64bit
Eclipse
(everything up to date )
i tried to set more RAM for AVD but it shows this warning;
"On windows, emulating RAM greater than 768M may fail to launch ... "
any advice to have smoother android virtual device?
Thanks
Hello All,
I had been annoying for weeks for this problem. When I start my game in Bluestacks in a Window under a VM environment, the game always goes into blank screen. I can know that the game has successfully loaded as when I click on some button (which I know where they are in normal situation), the app will proceed and be able to display some screen like notice page, which are some static page with text only. But it seems to be not the graphic of playing the game
I tried in VM of Window and also VM of Mac, neither of them is working... I also tried the latest BS from the official site or the 0.8.4.3036, both of them not working as well.
My VM Fusion is 10.1 and the windows is Win 7 Ultra version (T. Chinese), I am thinking if it is related to the tablet setting in the BS but I found no way to change it under 0.8 version, can anyone shed me some lights on this issue?
Thanks a lot!
Anyone have any idea?
Just updated the VMWare Fusion 6.0.2 today, but still got the blank screen in the bluestacks when load the game
getting black screen on bst while launching a game
Bluestacks is giving problumes or bored with it. Try best and fastest alternatives for bst.
Genymotion is the fastest Android emulator for app testing and presentation or even gaming. Genymotion is the evolution of AndroVM open source project, already trusted by 300 000 developers. Here I am using 64 bit Windows 8 for using Genymotion. Here we are going to setup Android 4.2.2 on a Windows operating system using Genymotion.
*Features of Genymotion:
1.Fastest Android emulator on the planet.
2.Do your simultanous automatic tests on unlimited virtual appliances .
3.Directly launch Genymotion from your Eclipse and Android Studio platforms.
4.It has Open GL acceleration ,multiscreen and full screen display.
*Steps to Setup Genymotion Android Emulator in Windows OS:
1.Go to official site of genymotion and sign up.
2.After logging in download genymotion for Windows 32/64 bits from the "get genymotion" option on official site
3.Download and install virtualbox
4.Now run the the downloaded genymotion-2.1.1.exe and install the Genymotion on your PC.
5.Then launch Genymotion and login with your Username and Password.
6.Select Add to create a new virtual device, then select a device from the list and click Add.
7.Then select next and the Virtual image starts downloading.
8.When the download is completed select next from the window.
9.Then you will be asked to enter a name for the downloaded Genymotion virtual device. Enter a name and select create and the click finish.
10.Now the virtual device will be listed in -Your virtual devices- in the home screen.
11. Then select play to start your virtual device.For the first time it asks to configure sdk path for using ADB , select the sdk path and you will be booted to Android home screen.
*installing an apk:after you did above procedure just drag and drop your .apk file of game to vertual machine. It will start installing. After installation complete. Open app bar and play just installed game. Many times faster and without getting black screen
I am using windows phone 8.1 (lumia 535) . i have just tried to install haret following the exact instructions from here http://forum.xda-developers.com/showthread.php?t=648045 but when i am trying to install on my 16 GB sd card using sd reader on my pc it showing that haret is naot a valid win 32 file to run.
and i also tried to install it on my phone however i didnt understand in the instruction where to do it. there it also indicating that is an error .
so is it possible to install android in lumia 535 dual??
or the haret is invalid for my phone? Am i have to use another sd card?
please can anyone tell me??
No Android on windows phone 8.x.
I'm going to give you the benefit of a doubt that you simply don't know anything at all about wither Haret or Windows Phone, and advise you to take a long, step beck from whatever you were trying to do. There are so many problems...
1) Those steps are for Windows Mobile. Windows Phone is *NOT* Windows Mobile. WP7 had a lot in common (though also a lot different) with WinMo, but WP8.x has almost nothing in common with WinMo.
2) That post was written before WP7 was even released, much less WP8. Expecting it to work on an OS that wasn't even released yet is... unreasonable.
3) Haret requires very deep access into the OS internals. WinMo had a very minimal security system that basically allowed apps to run as root without any restriction. WP (even WP7, much less 8.x) is much more restrictive.
4) Those steps explicitly say they require running unsigned code. While technically that's possible on WP8 via sideloaded apps, anything that isn't signed and isn't installed via .APPX or .XAP isn't going to run.
I could go on...
Installing android virtual device (AVD) with Intel HAXM support
Installing HAXM via android studio sdk manager gives no error.. but in AVD Manager, an error displayed - "/dev/kvm is not found" and hence doesn't allow me to run AVD
Installing HAXM(6.1.2) by downloading from intel official website gives me an error "Failed to configure driver: unknown error. Failed to open driver" which I tried to resolve using this solution given on intel blog
But still not working for me as comments shows for few people it is not working too..
Now, Clicking on green run button gives me same error in addition it displays something more related to "enable Intel VT-x from bios"
Now, in my computer's bios settings.. there is no VT-x but just "Intel VT" feature that I enabled.. but still no difference.. same error message.. I tried uninstalling and reinstalling android studio and AVD.. still no solution
My PC config is :
4gb ram ddr3
Intel i3 550 3.20 ghz
BIOS version TCIBX10H.86A.0037 (not updated - latest firmware is TCIBX10H.86A.0048)
Intel hd graphics
500gb hdd
Windows 7 32bit
PS:
1. Hyper-v is not installed on my computer (may be not supported or Windows need to be installed, I never tried to install it myself)
2. There is no virtual box installed either
3. Sorry for bad english and I'm new to android app development also
One of your issues is that you are running a 32 bit system. Android devices tools require a 64 bit computer.
From what you have said about the missing bios option again tells me your pc is not compatible on a basic level. Not a whole lot you can do. Other then get a new pc to work with Android tools.
zelendel said:
One of your issues is that you are running a 32 bit system. Android devices tools require a 64 bit computer.
From what you have said about the missing bios option again tells me your pc is not compatible on a basic level. Not a whole lot you can do. Other then get a new pc to work with Android tools.
Click to expand...
Click to collapse
Thank you for your reply.
I have another PC of my colleague, but I don't know exact configuration of it. Still I came to know that it has 64-bit Windows 7 installed and some high end Nvedia graphics card installed. I'll try using it and let you know.
zelendel said:
One of your issues is that you are running a 32 bit system. Android devices tools require a 64 bit computer.
From what you have said about the missing bios option again tells me your pc is not compatible on a basic level. Not a whole lot you can do. Other then get a new pc to work with Android tools.
Click to expand...
Click to collapse
prattkool said:
Thank you for your reply.
I have another PC of my colleague, but I don't know exact configuration of it. Still I came to know that it has 64-bit Windows 7 installed and some high end Nvedia graphics card installed. I'll try using it and let you know.
Click to expand...
Click to collapse
Problem continues even on other PC and I could never find why the error continued even if I got VT - x supported and enabled on both the PCs now.. (I checked using 'Intel® Processor Identification Utility' and 'securable.exe') finally i had to move on to 3rd party emulators which run on VirtualBox (like Genymotion).
Hello there
I just tried installing PrimeOS for the first time and I get an error message saying Disk service raised an external error Code: 2147024809
I'd like a solution to this problem please if one of the PrimeOS team can help
Another problem I got is after that error a part of my C/ partition where the prime was going to be installed is taken (the installation requires to shrink a part of the partition and it does so without even installing the system but the space is taken anyway) so far around 30 gigabytes are lost and i would like to know how to undo that.
Help would be appreciated
SeekN7eak said:
Hello there
I just tried installing PrimeOS for the first time and I get an error message saying Disk service raised an external error Code: 2147024809
I'd like a solution to this problem please if one of the PrimeOS team can help
Another problem I got is after that error a part of my C/ partition where the prime was going to be installed is taken (the installation requires to shrink a part of the partition and it does so without even installing the system but the space is taken anyway) so far around 30 gigabytes are lost and i would like to know how to undo that.
Help would be appreciated
Click to expand...
Click to collapse
i got that too install it from ISO better and have dual boot with you another OS ,use rufus to make ur USB
Missing os
Hope I'm on the correct thread.
Acer V5 122P came with Windows 8, updated to 8.1, 10, then CloudReady, PrimeOS ran but CloudReady took over.
Removing partitions with GParted I went too far and now have Missing OS.
PrimeOS is still on drive but won't run.
Windows 8.1 installer says partition is GPT.
I've made a real mess and have no idea how to get PrimeOS working and use my Acer.
Please can somebody help me.
@newbiecaem
To make your Acer laptop useable again do a clean Windows 10 installation.
How to install PrimeOS Android x86 on Windows PC / laptop is explained here.
Success
@jwoegerbauer
Many thanks. I had always wondered what a "clean install" was. Windows 10 now smoothly installed.
Hopefully now to dual boot with PrimeOS.
newbiecaem;83564405 [user=1890170 said:
@jwoegerbauer[/user]
Hopefully now to dual boot with PrimeOS.
Click to expand...
Click to collapse
@jwoegerbauer No success with installing primeos.
If I change boot to Legacy, I get missing OS.
If I leave it as UEFI nothing happens from the USB, it's not even listed in the boot order.
I tried the Windows installer, it didn't work either.
Are you able to help again?
@newbiecaem
To make PrimeOS installation an easy then if you're on Windows UEFI 64-bit use the PrimeOS Installer EXE, and not its image file ISO.
Also make sure Secure Boot is disabled in Windows UEFI.
PrimeOS PrimeSwitcher Not Switching
jwoegerbauer said:
@newbiecaem
To make PrimeOS installation an easy then if you're on Windows UEFI 64-bit use the PrimeOS Installer EXE, and not its image file ISO.
Also make sure Secure Boot is disabled in Windows UEFI.
Click to expand...
Click to collapse
I tried both standard and Classic. In each case PrimeSwitcher just brought me back to Windows 10.
I guess I'll just have to live with slo..o..o..w Windows 10.
Hi All,
The installation of PrimeOS 0.4.5 was easy. It takes about 15min. on my Lenovo T410 laptop
My issues coming after that:
1.) See almost all WiFi around me except my Samsung S20 Plus 5G Portable WiFi. why?
I see all WiFi routers around me, but none of my WiFi hotspots (Samsung S20+ / Huawei P10 and P9).
I tried with my wife Xiaomi Note M10 phone and working...
Any idea why only MI 10 working?
I tried all frequency combination (2.4 or 5)
2.) Almost all my favorites games are not running. Application closed/crashed during loading. (e.g: Guild Of Heroes, State Of Survival , Asphalt 9, CSR2)
Any idea why?
Istvan