Hi..I tried flashing fastboot dev rom 6.9.9. I thought it flashed well and tried to reboot from fastboot mode using fastboot reboot command..but it booted into EDL mode..unable to get out of it..and fastboot also is not working..can anyone please please help???
Try connecting with miflash tool, doesnit recognize the phone?
kirankowshik said:
Hi..I tried flashing fastboot dev rom 6.9.9. I thought it flashed well and tried to reboot from fastboot mode using fastboot reboot command..but it booted into EDL mode..unable to get out of it..and fastboot also is not working..can anyone please please help???
Click to expand...
Click to collapse
Dev roms will not help, only way out is flashing stable roms.
Hold and press the power button(30sec) without pulg in charger or pc it will reboot
I finally took it to service center and got the software flashed
same problem
hey friend, i also flashed stock rom using twrp and it got stuck into edl. no fastboot no booting. anything is not working. its under warranty. will the service centre do it for free or they charge something?
Hold power button and vol down for 10 secs (in 7-8 seconds, it reboots).
It will eventually go into fastboot mode.
Now you can use the trick to go into EDL mode from fastboot (google it or here)
From here use the MiFlash to flash global stable. Unlock your bootloader again by using MiUnlock and there you go!
EDIT:
Now only saw you fixed the problem, maybe this post will help others.
superboy123 said:
Hold power button and vol down for 10 secs (in 7-8 seconds, it reboots).
It will eventually go into fastboot mode.
Now you can use the trick to go into EDL mode from fastboot (google it or here)
From here use the MiFlash to flash global stable. Unlock your bootloader again by using MiUnlock and there you go!
EDIT:
Now only saw you fixed the problem, maybe this post will help others.
Click to expand...
Click to collapse
This wont work
Only EDL mode happens when some of the bootloader files gets corrupted
You will only see red light blinking n nothing else
Phone wont switch on [stuck at 900E mode], getting into fastboot is not possible
This can be fixed by using deep flash cable method
Harish_Kumar said:
This wont work
Only EDL mode happens when some of the bootloader files gets corrupted
You will only see red light blinking n nothing else
Phone wont switch on [stuck at 900E mode], getting into fastboot is not possible
This can be fixed by using deep flash cable method
Click to expand...
Click to collapse
That 900E mode is the QH USB Diagnostics mode. This means it is in EDL mode itself, from there you could use MiFlash. But when I first flashed the MIUI fastboot ROM, power got cut and my battery-less laptop turned off in the middle of the flash process. When I connected it was in EDL mode but MiFlash didn't detect it. Then holded the power and vol down button together for 10 secs and I was able to get into EDL, Mi Flash detected the phone in COMXX and flashed it!
Even now, I used that method to unbrick my note 3 (i flashed 5.1 MIUI ROM from 6.0 MIUI ROM and got bricked).
This works (atleast for me).
Same Situation also I'm faced.. by flashing a Ported Fastboot ROM through MiFlash Tool.. the ROM was actually.. Ported from Kate MIUI 8 Special Edition ROM..
After Successful flashing I'm not getting Fastboot mode, no recovery mode & even no charging logo by put my Device in charge.. only Red Blinking led flashing.. then I'm gone mad & go Service Center in the morning.. that guy told me my Device mother board need to change.. so i asked how many it cost? they told me 90% of your Device Rate.. so i told it means around 7-8 thousand?
they told me yes.. then i told then no need.. then I'll buy new Phone again..
then that Service Center guy ask me for a offer, if i Sell my Device in that condition.. so i asked how much? i told 7 thousand?
they told me in that condition.. it goes with 1 to 1½ thousand.. I didn't accepted their offer.. then come back to home with my brick device..
then at night my mind get blank & I'm gone mad.. what to do..
then thinking, it's alrdy brick no more hope..
at last i can try if it fixed somehow..
then Open my Device back panel by my nail.. & Open up all the Screws again & connect that two pin again.. After spending many times..
magically I'm get Com port in my MiFlash Tool..
then quickly flashed full Fastboot ROM. & after flashing, All the Screws get back then Reboot my Device.. & finally my Device get it's life Back again...
& even with that Device I'm taking with you (Write)... ! ??
Such a Horrible Situation I had ever faced..
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:03 AM ---------- Previous post was at 02:56 AM ----------
Test Point method is the only way... Here I'm giving you some useful link... If you want to Fix your brick device..
But your Device is under Warranty so I advice batter you should go to Service Center..
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:03 AM ---------- Previous post was at 03:03 AM ----------
http://en.miui.com/thread-244814-1-1.html
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:06 AM ---------- Previous post was at 03:03 AM ----------
http://en.miui.com/thread-274589-1-1.html
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:11 AM ---------- Previous post was at 03:06 AM ----------
http://en.miui.com/forum.php?mod=viewthread&tid=244814&mobile=2
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
This tutorial is good..
http://en.miui.com/forum.php?mod=viewthread&tid=245347&mobile=2
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:21 AM ---------- Previous post was at 03:13 AM ----------
http://en.miui.com/forum.php?mod=viewthread&tid=274589&mobile=2
Sent from my Redmi Note 3 using Tapatalk
superboy123 said:
That 900E mode is the QH USB Diagnostics mode. This means it is in EDL mode itself, from there you could use MiFlash. But when I first flashed the MIUI fastboot ROM, power got cut and my battery-less laptop turned off in the middle of the flash process. When I connected it was in EDL mode but MiFlash didn't detect it. Then holded the power and vol down button together for 10 secs and I was able to get into EDL, Mi Flash detected the phone in COMXX and flashed it!
Even now, I used that method to unbrick my note 3 (i flashed 5.1 MIUI ROM from 6.0 MIUI ROM and got bricked).
This works (atleast for me).
Click to expand...
Click to collapse
If it is 9008, then only you will be able to flash via Miflash tool
Or else, it wont detect com port
No, 900E is also supported by MiFlash.
Atleast it supports for my 32 bit MiFlash.
I will provide screenshot ASAP.
Guys whoever flashed using MI Flash Tool in EDL mode. Can you guys tell me if it will erase/wipe internal storage also or just system and data partitions only.
Please help ASAP. Thanks
abhimanyu.singh said:
Guys whoever flashed using MI Flash Tool in EDL mode. Can you guys tell me if it will erase/wipe internal storage also or just system and data partitions only.
Please help ASAP. Thanks
Click to expand...
Click to collapse
I believe it clears internal storage. Could be wrong though.
Related
my friend bought new RN3 SD from local shop 7 days ago. He tried to flash MIUI 6.9.22 fastboot rom with miFlashtool.
miflash refuse to flash rom after some time and it lets the phone half baked. Now phone is no vibrating while pressing power button only goes to 900E mode . there is no fastboot no edl. tried mathod from xiaomitips
http://xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
no luck to go in edl
bootloader of phone is locked
please tell anyone what can be done to revive this phone..
By qualcomm bootstrap brush into the system.
What shows up when you open MIflash?
Ivanlai said:
What shows up when you open MIflash?
Click to expand...
Click to collapse
He phone no come to fastboot and the no unlock.
---------- Post added at 06:59 AM ---------- Previous post was at 06:55 AM ----------
Say a little detail. Qualcomm system with the underlying program can be written. Bypass bootloder and fastboot.
---------- Post added at 07:02 AM ---------- Previous post was at 06:59 AM ----------
yogesh1970 said:
my friend bought new RN3 SD from local shop 7 days ago. He tried to flash MIUI 6.9.22 fastboot rom with miFlashtool.
miflash refuse to flash rom after some time and it lets the phone half baked. Now phone is no vibrating while pressing power button only goes to 900E mode . there is no fastboot no edl. tried mathod from xiaomitips
http://xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
no luck to go in edl
bootloader of phone is locked
please tell anyone what can be done to revive this phone..
Click to expand...
Click to collapse
Can you show me find what equipment it is computer?
Jiahao Lin said:
He phone no come to fastboot and the no unlock.
---------- Post added at 06:59 AM ---------- Previous post was at 06:55 AM ----------
Say a little detail. Qualcomm system with the underlying program can be written. Bypass bootloder and fastboot.
---------- Post added at 07:02 AM ---------- Previous post was at 06:59 AM ----------
Can you show me find what equipment it is computer?
Click to expand...
Click to collapse
You can enter EDL mode by fastboot using a tool. http://forum.xda-developers.com/android/software-hacking/guide-how-to-reboot-to-edl-fastboot-t3394292
finally used Test Point method to revive the phone.....
lost warrenty..
guide from xiaomitips not work on me
only test point gave a breathe to phone
hi y'all
i tried to flash my redmi 3s with a official dev rom today but unfortunatelly it seems that I messed things up.
My phone's bootloader wasn't unlocked so I tried the method for locked bootloaders using miflash and getting the phone into download mode. I got all the drivers installed (at least I think so) on Win 10 64 bit (driver signature verification is disabled).
While trying to flash using MiFlash I got at approx. 20% the error message "MiFlash Error "0x80070008 max buffer sector is 256". After that, my phone didn't boot anymore. All I'm seeing is the white Mi-icon.
I also noticed that It's not possible anymore to turn the device off. When I try, it turns on by itself and is stuck at the boot screen.
Download mode isn't working either. I tried the button-combination (Vol+ and -) and the "fastboot oem edl" command from Win command prompt when the phone is in fastboot mode - which does working.
When entering "fastboot oem edl" command I only get "waiting for any device" and nothing happens.
Is there any way to unbrick my phone or can I only use it as a paperweight from now on?
I hope yomebody can help.
Thanks & regards
Connect to your computer and try the power+volume(+)+volume(-)
It will put it in download mode
Sent from my Redmi 3 using Tapatalk
Aether060 said:
Connect to your computer and try the power+volume(+)+volume(-)
It will put it in download mode
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the fast response. I tried this while my phone was connected to my pc. Now I see this on my phone:
http://www.techgrapple.com/wp-content/uploads/2016/02/Unlock-Redmi-Note-3-Bootloader.jpg
and at the bottom it says pcsuite.mi.com.
When I take a look in the Windows device manager it says "Android Phone / Android ADB Interface".
Am I really in download mode now?
regards
Hi, because of that error you got installing new ROM you cant boot your phone anymore. As that happened to me before i might help you.
First, make sure you hold long enought power+VOL- buttons. Hold them for good one minute, you should be able to go into fastboot mode. Fast Boot worked for me when my Redmi had softbrick, also something messed up installing ROM.
Let me know how it goes.
Pauliens said:
Hi, because of that error you got installing new ROM you cant boot your phone anymore. As that happened to me before i might help you.
First, make sure you hold long enought power+VOL- buttons. Hold them for good one minute, you should be able to go into fastboot mode. Fast Boot worked for me when my Redmi had softbrick, also something messed up installing ROM.
Let me know how it goes.
Click to expand...
Click to collapse
Hi,
i can enter fastboot with Power and Vol- without any problems.
What do you mean? What should I do when I'm in fastboot Mode?
Regards
lunatikk said:
Hi,
i can enter fastboot with Power and Vol- without any problems.
What do you mean? What should I do when I'm in fastboot Mode?
Regards
Click to expand...
Click to collapse
You should now download MI flash program, and try to flash your device trough it. You can find tutorials on youtube.( just make sure you have lastest drivers installed.
Pauliens said:
You should now download MI flash program, and try to flash your device trough it. You can find tutorials on youtube.( just make sure you have lastest drivers installed.
Click to expand...
Click to collapse
No, please read my post all the way. I'm not able to flash using miflash at this point because miflash isn't showing my device and I'm also not able to enter bootmode with my device.
Regards
lunatikk said:
No, please read my post all the way. I'm not able to flash using miflash at this point because miflash isn't showing my device and I'm also not able to enter bootmode with my device.
Regards
Click to expand...
Click to collapse
Remember to disable driver signature enforcement
Sent from my Redmi 3 using Tapatalk
---------- Post added at 06:24 AM ---------- Previous post was at 06:21 AM ----------
Aether060 said:
Remember to disable driver signature enforcement
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
And also have you followed the steps? Like have you installed the unsigned drivers for mi flash? To flash using mi flash tool you will need to have your to disable driver signature enforcement, there is a way to disable it with cmd, I recommend you to use that method.
And your phone's screen should be totally black when its on download mode, if it's not helping then try going to the recovery mode at first, (volume(+)+power, then from the built in recovery miui go to the download mode, hope this helps, i use redmi 3 pro, same happened to me the first time
Sent from my Redmi 3 using Tapatalk
Aether060 said:
Remember to disable driver signature enforcement
Sent from my Redmi 3 using Tapatalk
---------- Post added at 06:24 AM ---------- Previous post was at 06:21 AM ----------
And also have you followed the steps? Like have you installed the unsigned drivers for mi flash? To flash using mi flash tool you will need to have your to disable driver signature enforcement, there is a way to disable it with cmd, I recommend you to use that method.
And your phone's screen should be totally black when its on download mode, if it's not helping then try going to the recovery mode at first, (volume(+)+power, then from the built in recovery miui go to the download mode, hope this helps, i use redmi 3 pro, same happened to me the first time
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
When I press Power and Vol+ the phone is simply rebooting. There isn't no Recovery screen.
I noticed, when installing a Version of miflash, a Tutorial said that there are three Popups which ask me if I really want to install an unsigned driver. I always only got 2 of these popups when installing miflash. Is there a way to install all drivers manually?
This got to be some kind of driver issue. I tried connecting the phone on another System (win7, 32bit) in fastboot mode. Here, when in enter fastboot OEM edl, the screen Gies black and the Windows device manager Shows COM3 Qualcomm...
It just ain't working on Win10
I got it now. I messed around in the windows device manager (unsinstalled the android / adb /...devices), reinstalled the drivers. Then, in fastboot mode, I executed the fastboot oem edl command and I got into download mode. From here I had to use the older version of MiFlash (2016.04.01.0 64bit). The newest version always gave me the error "specified cast is not valid" when I clicked the refresh button. Seems to be buggy as hell but the older version of Miflash worked as a charm.
Now, my bootloader is unlocked and I'm rockin the newest global version of official MIUI.
regards
flash the stock rom via mi flash , watch this video , this will surely help u
https://www.youtube.com/watch?v=wf8wg9d8bH8
Jainanjay said:
flash the stock rom via mi flash , watch this video , this will surely help u
https://www.youtube.com/watch?v=wf8wg9d8bH8
Click to expand...
Click to collapse
thanks for nothing dude.
/thread
HI GUYS,
Theres a problem occured in my redmi note 3, I am installing twrp in my redmi via mi flash tool, the notification showed me successful but when i am turning my phone on it is not booting nor going in recovery mode or into fastboot mod.
My phone is completely dead and it's not booting and no mi logo just when i connect it to pc the red light starts blinking.
plzz help me i am in a big problem
When i am installing twrp only usb debugging is on and not the oem unlocking and my bootloader is locked, i think thats the main problem.
i'll be very thankful of your's
ROM : MIUI 8.5.7.0 stable
You are not supposed to flash twrp using miflash tool.... Also the very first requirement for making any modification to your device is unlocked bootloader...Is your device booting into fastboot mode?
Also checkout this thread: https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
Thats the main problem its not going in fastboot mode or recovery mode only the red light blinks when connected to pc ?
Is the phone found by miflash? If it is, flash a fastboot rom
Manpreetbhatti123 said:
Thats the main problem its not going in fastboot mode or recovery mode only the red light blinks when connected to pc ?
Click to expand...
Click to collapse
Try flashing fastboot rom in EDL mode
Don't worry. I fixed my device last week. The issue was same and it is happening because you have not unlocked you bootloader or you had earlier unlocked it unofficially and now flashed an official emmc_appsboot.mbn. Either way this issue occurs.
All you have to do is follow this guide:
https://forum.xda-developers.com/redmi-note-3/how-to/guide-rn3-pro-se-t3565172/amp/
Thank the developer abd be happy that you have a RN3.
But the device is not connecting to pc
Manpreetbhatti123 said:
But the device is not connecting to pc
Click to expand...
Click to collapse
Have u checked in device manager
deepjyoti30 said:
Don't worry. I fixed my device last week. The issue was same and it is happening because you have not unlocked you bootloader or you had earlier unlocked it unofficially and now flashed an official emmc_appsboot.mbn. Either way this issue occurs.
All you have to do is follow this guide:
https://forum.xda-developers.com/redmi-note-3/how-to/guide-rn3-pro-se-t3565172/amp/
Thank the developer abd be happy that you have a RN3.
Click to expand...
Click to collapse
He is not even able to boot into fastboot mode so no way to enter EDL
---------- Post added at 07:20 AM ---------- Previous post was at 07:18 AM ----------
Manpreetbhatti123 said:
Thats the main problem its not going in fastboot mode or recovery mode only the red light blinks when connected to pc
Click to expand...
Click to collapse
Red light is blinking maybe because u got low battery.. try charging your phone a little and then try entering fastboot...
Does it show charging screen while you charge?
when i flash twrp the battery level is 90% or above
Criston said:
Have u checked in device manager
Click to expand...
Click to collapse
yes, but only one time it showed up and then gone
can deep wire flashing help me?
Check this
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292
Go to service centre...tell them..it didnt boot up after latest update..They ll fix it .
Its really cheap and quick.:good:
Manpreetbhatti123 said:
can deep wire flashing help me?
Click to expand...
Click to collapse
Yup, i have been there many times
Just make diy deep flash cable, check youtube
Hii Friends,
I am new to xda as i got an problem with my Redmi Note 3.
Specs Before Dead:
Miui 8.2.4
Android 6.0
32 Gb Rom,3 Gb Ram
I was trying to flash Android 8.0 Rom via Twrp {Flashed Through Mi Flash Tool}. Twrp Flashed Successfully and Then I started with flashing with Oreo Rom.It also got flashed successfully but the problem I think is I forgot to flash Lazy Flasher due to which the phone booted but was lock even though i entered the right password It started to reset the phone. Then the phone turned off never revived from there.
As I tried to power up many times and tried almost all the combination Keys like Power+Vol up,Power+Vol down,Power+Vol up+Vol Down,etc.Only Red Light is blinking while connected to charging or PC. In PC the Port shows Qualcomm 900E and cannot be recognized in Mi Flash Tool. As Mi flash tool detects Qualcomm 9008.Even I manually Tried to change the driver to 9008 but didn't help me to flash the ROM.Shown an error: Device attached is not working; in Mi Flash Tool
Even I showed in a repair center near me but he ended up with no solution even. I have been trying to get it in Edl mode so that i can flash Fast boot Rom but no clue for that.
If any clue for this would be really appreciated!!!
Your Believer
R$(Rishabh Sharma)
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Useless Thread Dude
Maximaro said:
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Click to expand...
Click to collapse
As I mentioned all the problem in the thread....there's nothing wrong with bootloader.
Thanks but no thanks
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers en.miui.com/forum.php?mod=attachment&aid=NzU4MzF8ZWU0ZWM1OTR8MTM5ODc1NDUzM3w2NDg1MDkzM3wxOTY5Nw%3D%3D
look like EDL mode
I can buy ur phone if u want to sell it. Reply if u r interested.
Unofficial Unlock
VaibhavKumar07 said:
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers
I have tried holding all the combination keys as mentioned earlier but no results. So without getting in Fastboot mode i cannot flash the rom and I don't think so that my device is in EDL mode because PC device manager shows Qualcomm 900E instead of 9008.
Thanks for replying to the thread and please provide other solution.
Click to expand...
Click to collapse
OK
forever.parv said:
I can buy ur phone if u want to sell it. Reply if u r interested.
Click to expand...
Click to collapse
ok
Hello,
Is there a solution to this problem? I too have the exact issue now.
Thanks
Rahim.
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Test Point Method
bro just go for test point method, it works for me
for that use have open backcover of your phone
Solution please
evansourav said:
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Click to expand...
Click to collapse
It would be great if u provide a solution for this.
Rishabh Sharma_10 said:
It would be great if u provide a solution for this.
Click to expand...
Click to collapse
Can you turn off the device?
Yudhz® said:
look like EDL mode
Click to expand...
Click to collapse
Yeah his phone in EDL mode. I went through this problem. Now everything is working fine.
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
You're already in EDL mode. So start from edl part. Try this... http://en.miui.com/thread-235865-1-1.html
evansourav said:
Can you turn off the device?
Click to expand...
Click to collapse
The device is already dead.
What happens when you plug charger? What about Qualcomm QHSUSB BULK? Is it showing up in EDL? Vibration Works? LCD Backlight Turns On?
santoshbodake said:
bro just go for test point method, it works for me
for that use have open backcover of your phone
Click to expand...
Click to collapse
Once happened to me this method worked for me
same issue here have you got any solution
This happens to me once...but i got it solved. This is really an edl mode of the phone. Keep trying connecting it to pc and try pressing those volume and power buttons if there is any voice connecting to pc means your phone is not dead. So, keep trying.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Here, this helped me. If you follow the instructions correctly, you will be able to unlock bootloader, boot into twrp and then flash your custom rom. Skip to the part when you will have the red led blinking.
Hope it helps.
Hi everyone,
I have Xiaomi Redmi Note 4, and when I using him, hes gone. Nothing work, no fastboot, no twrp, only Red led when i charge battery.
And i want to flash miui global in MiFlash and... I have error PING TARGET VIA FIREHOSE.
Guys please help me, I tried in 6 miui globals, china, any MiFlash version(Beta,2014,2015,2016) and dont work
Have a nice day.
P.S I have Qualcomm HS-USB QDLoader 9008 (COM3)
Try to flash in edl mode... For this you have an authorized mi account
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
ismail.ahmed84 said:
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
Click to expand...
Click to collapse
I tried IT and dont work
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
I flashed on edl and dont work
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
rs168 said:
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
Click to expand...
Click to collapse
I tried testpoint and always have error writing on Device in miflash
Snajper322 said:
I tried testpoint and always have error writing on Device in miflash
Click to expand...
Click to collapse
okay .. too bad you should replace your device, or you can find a good mechanic to replace some broken parts. it usually works
did you drop it?
or it happened during installing rom or something?
How does it happened please tell us.
Charge it overnight
Hold the power button 20-30 seconds the next day
Boot the device in fast boot mode by holding volume down+power button. Then go to MiFlash and flash fastboot redmi note 4 rom in edl mode(Unlock bootloader by running the last script file and then proceed to do the following steps). Download stock fastboot rom for redmi note 4 from official mi website(Note: The stock fastboot rom is different from stock recovery rom). While flashing the rom, below you have the option to choose three modes, click clean all and lock. Flash this rom and you're device will be working in no time. Make sure your device has adequate battery