Here on this thread you will get huge collection of Boot logos
Just place the .zip file in SD card and flash using any custom recovery like TWRP or CWM.
Or you can flash it in UNLOCKED PHONES ALSO using fastboot mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file
Zip file||Bin file file
For fastboot Follow following steps:-
1)Download & Install Motorola drivers.Link
2)Download & install Minimal Adb and fastboot.Link
3)Download Bin file of the logo u want to flash.
4)Place the Bin file in Minimal Adb and fastboot installation directory.
5)While staying in minimal adb and fastboot directory press shift and right click and open command prompt.
6)In your Phone go to Developer option in Settings and enable usb debugging.
7)Connect your phone to your computer using a data cable.
8)Type adb reboot bootloader and authorize your connection in phone(or you can also go to fastboot menu by power off, then press the power and volume down buttons simultaneously)
9)Once in fastboot mode make sure that its showing USB connected in your phone.
10)Type fastboot flash logo logo.bin in command prompt.(please make sure that logo =.bin file is located in that directory only)
11)Once logo is successfully flashed type fastboot reboot in command prompt.
12)You have successfully flashed boot logo.
More coming soon.......
If you want your own custom Bootlogo then E-mail me your request with Image.
E-mail - [email protected]
Don't forget to hit thanks if u like it... :laugh:
Image sources:Google images
I'm in CM13, also works?
Oshmar said:
I'm in CM13, also works?
Click to expand...
Click to collapse
Yes it works with any android version..
Bro is this a boot animation or a boot logo coz i want something to change that warning boot loader is unlocked!!!
[email protected] said:
Bro is this a boot animation or a boot logo coz i want something to change that warning boot loader is unlocked!!!
Click to expand...
Click to collapse
Yes this is boot logo
It will remove your unlocked bootloader warning...
File verification failed while flashing through twrp recovery!!!
[email protected] said:
File verification failed while flashing through twrp recovery!!!
Click to expand...
Click to collapse
Which boot logo u are using??
kashyapshashankv said:
Which boot logo u are using??
Click to expand...
Click to collapse
Mustang one (car.zip) and also leaf one
[email protected] said:
Mustang one (car.zip) and also leaf one
Click to expand...
Click to collapse
Can u post the image of error message
kashyapshashankv said:
Can u post the image of error message
Click to expand...
Click to collapse
This is what happening!!
[email protected] said:
Mustang one (car.zip) and also leaf one
Click to expand...
Click to collapse
Is it Zip signature verification failed??
can you get the original Motorola logo?
---------- Post added at 04:33 PM ---------- Previous post was at 04:32 PM ----------
kashyapshashankv said:
Is it Zip signature verification failed??
Click to expand...
Click to collapse
Yes!!
[email protected].com said:
This is what happening!!
Click to expand...
Click to collapse
Go to settings of twrp and uncheck zip signature verification and u are ready to flash
kashyapshashankv said:
Go to settings of twrp and uncheck zip signature verification and u are ready to flash
Click to expand...
Click to collapse
Thnks it worked:good:
Can you make a original Motorola logo??
[email protected] said:
Thnks it worked:good:
Can you make a original Motorola logo??
Click to expand...
Click to collapse
I will let u know when its ready
kashyapshashankv said:
I will let u know when its ready
Click to expand...
Click to collapse
Ohk thnk u soo much:good:
[email protected] said:
Ohk thnk u soo much:good:
Click to expand...
Click to collapse
Follow the given link and download the stock logo
https://drive.google.com/file/d/0B7I0SRU1VG16emI1Y25Nbk5CdkE/view?usp=sharing
kashyapshashankv said:
Follow the given link and download the stock logo
https://drive.google.com/file/d/0B7I0SRU1VG16emI1Y25Nbk5CdkE/view?usp=sharing
Click to expand...
Click to collapse
Thnk u soo much again bro!!
[email protected] said:
Thnk u soo much again bro!!
Click to expand...
Click to collapse
Available anytime
updated again
Related
Complete method to extract system files from ftf files of xperia devices for ics
(For gb u can use nero young method which is simple, but for ics u will get system files from ftf by this method (for windows)u will not get extracted folder by nero young method )
whom is this tutorial for?
For those who need exact system files from ftf of SONY XPERIA smart phone
Click to expand...
Click to collapse
TOOLS NEEDED
Flash tool for xperia devices (get it from here (use flash tool v 0.9.0.0):http://androxyde.github.com/)
unyaffs tool (get it from here : http://www.mediafire.com/?h631v46n8v6efe3 )
Click to expand...
Click to collapse
METHOD :
step 1:
Open the ftf file using winrar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
step 2:
Extract which ever file u need (in this case i need system folder so i extracted system.sin )
step 3:
Open flash tool and click advanced option and then click sin editor
step 4:
Go to system.sin file from where u had extracted and open file
step 5:
Click dump data option
Wait for it to finish the process
step 6:
After finishing the process u will get two files in the folder where u r having original system.sin (one will be system.partinfo and other will be system.yaffs2 ) so tht u get yaffs2 file continue with the next step
Click to expand...
Click to collapse
step 7:
Download unyaffs tool from the link provided first and extract unyaffs.exe and cygin1.dll to c drive of ur system by making a folder named "unyaffs"
Click to expand...
Click to collapse
step 8:
Go to the folder where u get system.yaffs2 ( the file we get though the flash tool process) and copy the file
step 9:
Paste it to the unyaffs folder in "c"
step 10:
While u are in unyaffs folder press shift + right mouse button then only u will get "open command window here option", click that.... Other wise u can go to this folder using usual command method
step 11:
U will get command window inside unyaffs folder
step 12:
U should type inside the command window "unyaffs.exe system.yaffs2" (app name)(space)(name of the file u need to extract, if u need to extract kernel use tht file name here) and then press enter
step 13:
Wait for some time " until u see end of image " and u can see the extracted folders appearing in the unyaffs folder
through this method u can get any .sin file inside ur ftf
thankyou for reading my tutorial
Dont forget to press thanks
:d
Click to expand...
Click to collapse
Nice tutorial, there are some typos though,
You wrote http://http://androxyde.github.com/, in other words you wrote twice times the http
also it's kernel, not kernal!
Anyway, awesome guide,
Thank you!
leajian said:
Nice tutorial, there are some typos though,
You wrote http://http://androxyde.github.com/, in other words you wrote twice times the http
also it's kernel, not kernal!
Anyway, awesome guide,
Thank you!
Click to expand...
Click to collapse
thanks for pointing out errors
Can't do
I cant seem to get .587 files out, no way, all i get is "broken image file"
Here is SS. Any ideas?
SHIRI said:
I cant seem to get .587 files out, no way, all i get is "broken image file"
Here is SS. Any ideas?
Click to expand...
Click to collapse
It seems the file u extracted through flash tool is curropted, in this method I had used. 587 ftf... Try with a new one
sent from my xperia neo v
i'm trying to extract system.sin from .587 fw and i get the same error "broen image file"
Code:
C:\unyaffs-winready>unyaffs.exe system.yaffs2
broken image file
C:\unyaffs-winready>
sgj1 said:
i'm trying to extract system.sin from .587 fw and i get the same error "broen image file"
Code:
C:\unyaffs-winready>unyaffs.exe system.yaffs2
broken image file
C:\unyaffs-winready>
Click to expand...
Click to collapse
i dnt think tht it will be error of yaffs tool it might be error with flash tool.. try once more with flash tool
Flashtool above 0.9.0.0 version is giving broken image file.
For now, use flashtool 0.9.0.0.
How to extract Huawei firmware / update.app
I wondered how to extract the firmware files Huawei, since with the dsixda's Android Kitchen I could not do it. After some research I finally found and I share my method in this thread.
This method works for the newer firmware (i tested on JellyBean Emotion UI 1.5) but should also work on a lot of others version.
Please for all improvements, send me a MP. I’m french and it’s possible for me to misspellings
This thread is in constant progress thanks to your feedback..
I. What you will need
ActivePerl to execute the script that will extract update.app[/URL][/B]
JoeyJiao's split_updata that i have modfied
Winrar
The Huawei update.app you want to extract
Android ICS JB EXT4 imagefile unpacker
A brain =)
II. Download and install ActivePerl
1. Download ActivePerl
2. Install it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. It's okay for ActivePerl
III. Install script to extract update.app
1. Create a new folder on your Desktop named "Huawei ROM extract"
2. Download this script (I modified it to work properly) in the folder "Huawei ROM extract"
3. Put your update.app in the same folder
NB: It have to be named update.app !!!
4. So you folder look like this:
5. Double click on split_updata.pl
6. This window will appear, just wait:
7. When it finish the window is closed automaticaly
8. In your folder this is a new folder named "output", open it
9. You will see some files like:
10. It's okay for extraction
III. Find system, boot and recovery files
1. Download my script HuaweiFinder in the folder "Huawei ROM extract"
2. Execute my script with a double click, youwill see this windows:
3. It's done, go into ouput folder and you will see some files:
boot.img is the kernel files
recovery.img is the recovery
system.img is the rom
others files are some others system files
III. Open and extract img
1. Now download Android ICS JB EXT4 imagefile unpacker
2. Extract it in the folder "Huawei ROM extract"
3. Open ext4_unpacker
4. Double clic on ext4_unpacker.exe
5. Clic on this icon:
6. Go to the output folder and select system.img clic on "Open"
7. Now select all files, right clic and clic on "Extract"
8. You will see this:
9. It's okay the ROM is extracted where you have choosen !!
I hope this guide will be helpful!! And don't forget to thanks
GalaxyUser
Thanks for the great guide, but I have a problem executing split_updata.pl. when i double click it, a terminal just opens and closes itself in less than a second but there is no change. I installed the active perl in the link. Any idea?
Edit:
If i type
Code:
perl split_updata.pl update.app
on terminal, it gives me
Code:
Unrecognised file format. Wrong identifier.
And it makes a folder named "output" in the directory, but nothing is in there.
The update.app was in the update.zip from B522 to B601 for ascend d1.
great tread!
but for ascend y300 don't work very well..
it dont' recognize boot.img and recovery.img
Hi,
Zittoro said:
Thanks for the great guide, but I have a problem executing split_updata.pl. when i double click it, a terminal just opens and closes itself in less than a second but there is no change. I installed the active perl in the link. Any idea?
Edit:
If i type
Code:
perl split_updata.pl update.app
on terminal, it gives me
Code:
Unrecognised file format. Wrong identifier.
And it makes a folder named "output" in the directory, but nothing is in there.
The update.app was in the update.zip from B522 to B601 for ascend d1.
Click to expand...
Click to collapse
It's stange... Which is the size of the file ?
misha84 said:
great tread!
but for ascend y300 don't work very well..
it dont' recognize boot.img and recovery.img
Click to expand...
Click to collapse
Send me boot.img and recovery.img, or give me the rom link. I will try to fix that
GalaxyUser said:
Hi,
It's stange... Which is the size of the file ?
Click to expand...
Click to collapse
if you mean the size of the update.app i used, it was about 10.26mb
Edit
here is the update.zip for the update.app file
GalaxyUser said:
Send me boot.img and recovery.img, or give me the rom link. I will try to fix that
Click to expand...
Click to collapse
try this, is not the same that i try, but is for the same terminal
http://download-c.huawei.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDcxNDI=
Zittoro said:
if you mean the size of the update.app i used, it was about 10.26mb
Edit
here is the update.zip for the update.app file
Click to expand...
Click to collapse
So this is an OTA update and not a full rom
misha84 said:
try this, is not the same that i try, but is for the same terminal
http://download-c.huawei.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDcxNDI=
Click to expand...
Click to collapse
Will look at
Thanks so much for sharing this. But I got a bit of a problem where you execute huawei finder script to find the boot, recovery and system image. Mine got only the system image and not the boot and recovery image. The update.app I extracted from is 389mb. Can you please clarify me on this? Where did I do wrong? I believed I followed every steps as shown.
Sent from my T8620 using xda premium
I am having problem opening .img files as the ext4_unpacker.exe returns wrong file format everytime I tried to open it. I have redownload this exe application many times but still same result
Any solutions?
What happens when updating?
I'd like to know what happens when updating because I have a stock update.app for my phone u8681 wind and it refuses to finish step 2/2 and always fails. I was thinking maybe I'd modify the update package so that it would work but first I need to know which checks it's failing at.
Also I want to know how to repack the modified update.app
I've got the same issue with boot.img and recovery.img.
Im using the full rom for Huawei Ascend Mate.
Btw, everything else worked!
Thanks!
MCK
Zittoro said:
if you mean the size of the update.app i used, it was about 10.26mb
Edit
Please update this file link! Currently is dead!!!!
Click to expand...
Click to collapse
Really helpful spe!
thanks a lot!
But it seems a bit complicated.
Mckangi said:
Zittoro said:
if you mean the size of the update.app i used, it was about 10.26mb
Edit
Please update this file link! Currently is dead!!!!
Click to expand...
Click to collapse
What do you need?
Sent from my HUAWEI MT1-U06 using xda app-developers app
Click to expand...
Click to collapse
Is that possible to repack the file?
Made a tool which makes the process a lot easier:
http://forum.xda-developers.com/showthread.php?t=2433454
Hello,
Have you looked for unpack the update.app of the y300 ?
Thanks.
I also tried your method of extraction but got an error...!
I could not find the boot.img and the recovery.img files from the original firmware...!
could you please share the original firmware with me and any of the custom rom if supported...?
waiting for your reply...!
u8510 Fail
I tried it with a u8510 rom and it fails at phase III.6. It says "Unknown file format" when openning the file
need to help
how to pack system.img to UPDATE.APP back..?help me plszz... thanks :good:
Flashable Bootanimation of Latest Android Marshmallow version for Moto G 2014
Preview::cyclops:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install it as a normal flashable zip from recovery
Steps to flash
1. Reboot to recovery
2. Select android_marshmallow_xxx_xx.zip file flash it
3. Reboot System
4. Enjoy Marshmallow Bootanimaion:fingers-crossed:
==> OR<==
1: Extract the zip and copy the file system/media/bootanimation.zip and paste in your SD card.
2: Name the file that you downloaded bootanimation.zip
3: Go to system
4: Go to media
5: Delete the bootanimation.zip that is there or copy it to SD card for backup
6: Now go to the download folder and Copy the bootanimation.zip that you downloaded
7: Paste it in media
8: change the premission that to 744
9: Reboot (Not Soft Reboot*)
10: Enjoy Marshmallow Bootanimaion:fingers-crossed:
Download Link: http://d-h.st/cL70
==>Or<==
Scan QR-Code
*Please do not make mirror link you can share this link:silly:
Note*
I AM NOT RESPONSIBLE IF YOUR PHONE GETS BRICKED OR BOOTLOOP OR OTHER PROBLEMS
Hit Like if Its Work
Works good here . Thanks !
Thank you!
Sent from my titan using XDA Free mobile app
Thanks for your Feedbacks Guys
Dont forget to hit like button and polls too
Enjoy on xda cheers..
Its just new and latest, but not as cool as Moto's stock boot animation...
very good work bro :good::fingers-crossed:
Thank You!
Very good man!
Sent from my Moto G 2014 using XDA Free mobile app
CM 12.1?
Does it work on cm 12.1?
axays said:
Flashable Bootanimation of Latest Android Marshmallow version for Moto G 2014
Preview::cyclops:
Install it as a normal flashable zip from recovery
Steps to flash
1. Reboot to recovery
2. Select android_marshmallow_xxx_xx.zip file flash it
3. Reboot System
4. Enjoy Marshmallow Bootanimaion:fingers-crossed:
==> OR<==
1: Extract the zip and copy the file system/media/bootanimation.zip and paste in your SD card.
2: Name the file that you downloaded bootanimation.zip
3: Go to system
4: Go to media
5: Delete the bootanimation.zip that is there or copy it to SD card for backup
6: Now go to the download folder and Copy the bootanimation.zip that you downloaded
7: Paste it in media
8: change the premission that to 744
9: Reboot (Not Soft Reboot*)
10: Enjoy Marshmallow Bootanimaion:fingers-crossed:
Download Link: http://d-h.st/cL70
==>Or<==
Scan QR-Code
*Please do not make mirror link you can share this link:silly:
Note*
I AM NOT RESPONSIBLE IF YOUR PHONE GETS BRICKED OR BOOTLOOP OR OTHER PROBLEMS
Hit Like if Its Work
Click to expand...
Click to collapse
Does this work on CM 12.1 NIGHTLY?
yes, it will work on cm 12.1
axays said:
Flashable Bootanimation of Latest Android Marshmallow version for Moto G 2014
Click to expand...
Click to collapse
Works on AOSP by LuK1337. Thank you.
going to check, replying to subscribe the thread so that I can vote afterwards
---------- Post added at 12:17 PM ---------- Previous post was at 11:53 AM ----------
working on cm11, there are png files as well if you wish to edit the logo like me
Is true?
Sent from my XT1063 using XDA Free mobile app
thanks!
Is there also a OEM Logo from google, like before you get your bootscreen... The official I mean with black background and white text
Is this thing running on CM 13?
yes
thesamu17 said:
Is this thing running on CM 13?
Click to expand...
Click to collapse
it will work
Can I flash this over a boot logo? Or will it change my bootlogo as well?
you can
Captain Krunch said:
Can I flash this over a boot logo? Or will it change my bootlogo as well?
Click to expand...
Click to collapse
its a boot animation not boot logo..
you can flash from recovery:good:
I needed an apk which is samsungcamera.apk.
Using note 4 exynos
N910c
Anyone pleasee. Help me with it
Give me via download link is okay
Thankssss
Mohd Azylee said:
I needed an apk which is samsungcamera.apk.
Using note 4 exynos
N910c
Anyone pleasee. Help me with it
Give me via download link is okay
Thankssss
Click to expand...
Click to collapse
Sorry I don't have your apk because I have snapdragon one. But,
If you have stock firmware you can extract any stock app from it.
First download this software
http://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Then extract firmware using 7zip.
You will get system.img. ext4 file.
Rename it to system.img.
Extract software.
You will get file named Extractor.
Move system.img file to Extractor folder.
Then run Extractor. Bat file.
Type 3 and press enter.
You will get folder named system in extractor folder which include everything in your stock rom.
Chamaka said:
Sorry I don't have your apk because I have snapdragon one. But,
If you have stock firmware you can extract any stock app from it.
First download this software
http://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Then extract firmware using 7zip.
You will get system.img. ext4 file.
Rename it to system.img.
Extract software.
You will get file named Extractor.
Move system.img file to Extractor folder.
Then run Extractor. Bat file.
Type 3 and press enter.
You will get folder named system in extractor folder which include everything in your stock rom.
Click to expand...
Click to collapse
So I need to download my note 4 stock rom. So it was large to my data plan XD
Well thanks!! Bro
I will make it later
Much thanks !!
Chamaka said:
Sorry I don't have your apk because I have snapdragon one. But,
If you have stock firmware you can extract any stock app from it.
First download this software
http://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Then extract firmware using 7zip.
You will get system.img. ext4 file.
Rename it to system.img.
Extract software.
You will get file named Extractor.
Move system.img file to Extractor folder.
Then run Extractor. Bat file.
Type 3 and press enter.
You will get folder named system in extractor folder which include everything in your stock rom.
Click to expand...
Click to collapse
Can u download and give me the flashable camera app note 4
My phone is n910c exynos
Any help will be appreciated
Hope u can help me
Thanks!!
Need more information:
1. Are you on stock room or custom rom?
2. Are you on Android 5.1 or 6.0 ?
usju said:
Need more information:
1. Are you on stock room or custom rom?
2. Are you on Android 5.1 or 6.0 ?
Click to expand...
Click to collapse
Stock rom
6.0.1 marshmallow
Ive download a stock rom
U just do it just in case if mine didnt work
Thanks
Chamaka said:
Sorry I don't have your apk because I have snapdragon one. But,
If you have stock firmware you can extract any stock app from it.
First download this software
http://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Then extract firmware using 7zip.
You will get system.img. ext4 file.
Rename it to system.img.
Extract software.
You will get file named Extractor.
Move system.img file to Extractor folder.
Then run Extractor. Bat file.
Type 3 and press enter.
You will get folder named system in extractor folder which include everything in your stock rom.
Click to expand...
Click to collapse
Cant extract. Started the extarcting process and suddenly crashes .. why
Chamaka said:
Sorry I don't have your apk because I have snapdragon one. But,
If you have stock firmware you can extract any stock app from it.
First download this software
http://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Then extract firmware using 7zip.
You will get system.img. ext4 file.
Rename it to system.img.
Extract software.
You will get file named Extractor.
Move system.img file to Extractor folder.
Then run Extractor. Bat file.
Type 3 and press enter.
You will get folder named system in extractor folder which include everything in your stock rom.
Click to expand...
Click to collapse
Used to the old one and it says img is empty. And the new one was crash like that...
Mohd Azylee said:
Cant extract. Started the extarcting process and suddenly crashes .. why
Click to expand...
Click to collapse
Open firmware file using 7zip. Then try to extract only system.img.ext4 .Then Rename it as system.img and try again.
I used that method many times but I didn't get any erros.
Chamaka said:
Open firmware file using 7zip. Then try to extract only system.img.ext4 .Then Rename it as system.img and try again.
I used that method many times but I didn't get any erros.
Click to expand...
Click to collapse
Im using winrar and I don't think winrar killed the file
Maybe something is wrong with the file.
Any else. Tried and it didn't worked. Oh man
Mohd Azylee said:
Im using winrar and I don't think winrar killed the file
Maybe something is wrong with the file.
Any else. Tried and it didn't worked. Oh man
Click to expand...
Click to collapse
Don't use winrar. I don't think it's suitable for open that type of files. Please try it with 7 zip. It's open source software (only 1.3 mb).
http://www.7-zip.org/
Chamaka said:
Don't use winrar. I don't think it's suitable for open that type of files. Please try it with 7 zip. It's open source software (only 1.3 mb).
http://www.7-zip.org/
Click to expand...
Click to collapse
Its the same the exttactor crashed
Mohd Azylee said:
Its the same the exttactor crashed
Click to expand...
Click to collapse
Sorry I have no idea about this. I didn't get any problems when extracting firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Chamaka said:
Sorry I have no idea about this. I didn't get any problems when extracting firmware.
View attachment 3911784
View attachment 3911785
View attachment 3911787
View attachment 3911786
Click to expand...
Click to collapse
Yeah i guess it is
Can u help me
Note 4 exynos
N910C
And gimme the apk so on.
Go to this thread:
http://forum.xda-developers.com/note-4/themes-apps/galaxy-note-4-n910c-ultra-quality-t3356025
Download this from there: Root-61_UHQ_Cam_Mod_V3_N910C_XXU2DPE6-v2.rar
Then flash via recovery
usju said:
Go to this thread:
http://forum.xda-developers.com/note-4/themes-apps/galaxy-note-4-n910c-ultra-quality-t3356025
Download this from there: Root-61_UHQ_Cam_Mod_V3_N910C_XXU2DPE6-v2.rar
Then flash via recovery
Click to expand...
Click to collapse
Didn't worked
Thanks everyone who helped me. Now the camera app works
Some files for Leagoo M8 owners:
SuperSU v2.79
http://ul.to/nzjkfpds
Recovery (TWRP & Scatter File)
http://ul.to/sf9ig4yl
MTK Drivers
http://ul.to/crs6xzlz
SP Flash Tool v5.1540.00
http://ul.to/4wv9y3wj
Screen Overlay Fix (to flash)
http://ul.to/vx2lszbz
Xposed (to flash)
http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v87-sdk23-arm.zip
Xposed (App)
https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
Use SP Flash Tool to flash the Recovery (TWRP) and use then TWRP on your phone to flash SuperSu, Xposed and Screen Overlay Fix
Unable to download files
Can you please upload those files here or Dropbox as I am unable to download from that site. Thank you.
donshady28 said:
Can you please upload those files here or Dropbox as I am unable to download from that site. Thank you.
Click to expand...
Click to collapse
Sorry, too large for XDA. Use Uploaded free user Download. Should work for everyone
Scatter file Missing
After downloading the Recovery Twrp I can't find scatter file. Kindly upload the scatter file. Thank you.
donshady28 said:
After downloading the Recovery Twrp I can't find scatter file. Kindly upload the scatter file. Thank you.
Click to expand...
Click to collapse
Scatter file is inside the TWRP.rar file.
MT6580_Android_scatter.txt
Can anyone confirm that TWRP is fully working? sd card, backups, etc all working?
stephendt0 said:
Can anyone confirm that TWRP is fully working? sd card, backups, etc all working?
Click to expand...
Click to collapse
Yes, it works.
I used it to flash SuperSu and Xposed. :good:
Thanks for confirming it works!!!
SomeOneX said:
Yes, it works.
I used it to flash SuperSu and Xposed. :good:
Click to expand...
Click to collapse
Excellent. Are you able to restore backups? This is something important for me
I'm unable to download the scatter file.
SomeOneX said:
Scatter file is inside the TWRP.rar file.
MT6580_Android_scatter.txt
Click to expand...
Click to collapse
I'm unable to download the scatter file. Can anyone send the scatter file to my mail.
[email protected] Thank you.
donshady28 said:
I'm unable to download the scatter file. Can anyone send the scatter file to my mail.
[email protected] Thank you.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
stephendt0 said:
Excellent. Are you able to restore backups? This is something important for me
Click to expand...
Click to collapse
I used only TitaniumBackup.
SomeOneX said:
I used only TitaniumBackup.
Click to expand...
Click to collapse
OK, I'd like to try Xposed and a few other mods but I'd hate to not be able to restore to stock ROM if backup and restore doesn't work properly (which I've seen a couple of times on MTK devices)
Update! TWRP works well, even backup and restore seems OK. Now to make a debloated ROM :good:
PS: Can someone explain the Overlay fix? I'm not sure exactly what this is supposed to resolve. I am using the 20161213 ROM.
After flashing the TWRP, tried to reboot to recovery but not working. How do I boot into recovery.????
I tried it in 20161213rom and 20170116 ROM!
donshady28 said:
After flashing the TWRP, tried to reboot to recovery but not working. How do I boot into recovery.????
I tried it in 20161213rom and 20170116 ROM!
Click to expand...
Click to collapse
What do you get when you turn your phone off and hold VOL UP + Power? Once I select "recovery" then it shows the Leagoo logo for a moment then boots right in.
When I turn the phone off, I hold the vol + and power and I get recovery, fastboot and reboot. I select the recovery using the vol down. But its keeps showing Leagoo logo
Okay. For whatever reason, it hasn't flashed the recovery properly - it sounds like it's missing. If you have the stock recovery, it shows the Leagoo logo for a moment, then shows the Freeme logo only (no text, just a logo). With TWRP it takes around 2-3 seconds for it to come up. It sounds to me that something went wrong when you tried to flash TWRP. What version of SPFlashTools are you using? Are you sure the right drivers are installed? Perhaps try another computer and USB cable and try with SPFlashTool again.
---------- Post added at 01:35 PM ---------- Previous post was at 12:55 PM ----------
Good news! I uploaded a debloated ROM. Link here: https://forum.xda-developers.com/android/development/6-0-lazy-s-debloated-rom-leagoo-m8-t3574816
It worked for my Leagoo M8 on second reflash with Pack-Flashtool-v5.1640.00.000.
After first attempt with original flashtool I had Freeme's hieroglyph and "no command" text.
Thank you!
Anyone knows if this can work for "Pro" version?