Related
yes i noticed other people post similar threads. but i could not find any answer to my issue, so i post another one. if i missed something, please pointed it out for me by all means.
My SGS2 is with Vodafone Australia.
i already upgraded it to ICS. but i do remember what rom i used when i upgraded it, the Kies cant recognise my phone. So last night, i downloaded another rom and planned to reflash the phone with a stock rom. it turned out all mess!
the flashing failed with boot.bin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response form LOKE
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
then i did some research and reckoned i might use the wrong rom, so just finished downloading another version: I9100TDULP9_I9100TVAULP7_I9100TDULP4_HOME.tar
but the issue is exactly same.
i use the rom for PDA, PHONE and CSC, didnt select repartition and not touch PIT either.
the phone is GT-I9100T.
Guys, please help me. i am a noob.
restart pc
kill kies
download the file again preferable from checkfus (builtin curruption check)
put the phone in download mode, connect the cable
put the file in pda.
all the new files i see are one file tar.md5 unless its different fro T
so just put in pda and flash.
edit: do not forget to wipe before nd after for optimal working
alwayseric said:
the phone is GT-I9100T.
Guys, please help me. i am a noob.
Click to expand...
Click to collapse
well heres all the firmwares for your phone hopefully u may spot the one you had if not just go with the lastest one.
FIRMWARE FOR GT-I9100T
the problem was fixed.
it seems i had to put both odin.exe and odin.ill into one folder (i extracted them on the desktop at first) or i should not load the rom file into PDA, CSC and PHONE. as there was only one file, i only needed to load it in PDA.
atifsh said:
restart pc
all the new files i see are one file tar.md5 unless its different fro T
so just put in pda and flash.
edit: do not forget to wipe before nd after for optimal working
Click to expand...
Click to collapse
i wish i had read your reply earlier. yes, only need to put the file into pda. i hope my lesson will be useful to some other newbies in the future.
thanks.
DJBoxer said:
well heres all the firmwares for your phone hopefully u may spot the one you had if not just go with the lastest one.
Click to expand...
Click to collapse
yes, it is where i downloaded the roms. i guess the first one i got was wrong, the second should be good. thanks.
but now, i have another issue with Kies. even though i used the "official" voda's rom, Kies still reckon "Your device does not support software update via Kies"
any clue?
Kies should work now that you've flashed the Voda ICS rom, however, for some reason (I have no idea why it doesn't work sometimes, perhaps someone else on here does ?), you'll find Kies still doesn't work even tho the stock rom contains the correct CSC, etc.
You could muck around for ages trying to find a solution to this, or you could simply do what most people on here who have found themselves in your situation do & that is to use Odin to flash future stock rom 'updates'.
Regardless of whether Kies works or not now, you do have the most up to date stock rom available for Voda, so you won't need to flash another stock rom until Voda issue another update (last one before recent ICS was in November).
Get the PC version of Checkfus, and when Voda do issue another update, you'll be able to easily download same & flash it via Odin.
alwayseric said:
i wish i had read your reply earlier. yes, only need to put the file into pda. i hope my lesson will be useful to some other newbies in the future.
thanks.
Click to expand...
Click to collapse
THANK YOU FOR POSTING THIS ADVICE! Odin failed for me after several attempts, which scared the crap out of me as it was my first time flashing a ROM on my SGS2...
Since there's only one file in the downloaded ROM, you only need to specify the file in the PDA section!!! That's it so simple... the guides need to be updated!!
Guys, first of all, if there's an answer for my q in previous posts I apologize and thank beforehand for the directions.
This is the deal, i flashed this rom in my gs3 intl version over mobile odin.
Everything went well, loaded fine and all, and the phone overall is working fine, the issue is, as i tried to inject root over odin on my pc, odin returned me the error "no pit partition" and failed.
Same thing happened as i tried to flash again my previous oficial rom.
Is there any solution for this? Can i get root? How do i go back to my ofw?
Thanks Thanks thanks and sorry again for my inexhaustible search.
Andrew_spiegel said:
Guys, first of all, if there's an answer for my q in previous posts I apologize and thank beforehand for the directions.
This is the deal, i flashed this rom in my gs3 intl version over mobile odin.
Everything went well, loaded fine and all, and the phone overall is working fine, the issue is, as i tried to inject root over odin on my pc, odin returned me the error "no pit partition" and failed.
Same thing happened as i tried to flash again my previous oficial rom.
Is there any solution for this? Can i get root? How do i go back to my ofw?
Thanks Thanks thanks and sorry again for my inexhaustible search.
Click to expand...
Click to collapse
Sounds like you flashed the wrong cfroot. Whats the filename of cfroot you flashed.
Also maybe a screenshot of the failed odin message.
Sent from my GT-I9300 using xda premium
I'll post a screen shot as soon as i get home, all i remember is it says something about the pit partition and it fails.
Its smt like this (got it from a post with a similar error)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried both odin 1.8 and 3, same result.
Andrew_spiegel said:
I'll post a screen shot as soon as i get home, all i remember is it says something about the pit partition and it fails.
Its smt like this (got it from a post with a similar error)
Added!!
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
Removed!!
I tried both odin 1.8 and 3, same result.
Click to expand...
Click to collapse
Post the filename of the cfroot you flashed as well.
Sent from my GT-I9300 using xda premium
I dlded it from the zedomax website,
http://galaxys3root.com/galaxy-s3-r...4-2-1-leaked-rom-root-for-galaxy-s3-gt-i9300/
I9300XXUFMB3_I9300OJKFMB3_ILO.zip
Stock leaked fw for s3 i9300
Andrew_spiegel said:
I dlded it from the zedomax website,
http://galaxys3root.com/galaxy-s3-r...4-2-1-leaked-rom-root-for-galaxy-s3-gt-i9300/
I9300XXUFMB3_I9300OJKFMB3_ILO.zip
Stock leaked fw for s3 i9300
Click to expand...
Click to collapse
Hi
you are trying to root 4.2.1. so check if your cfroot version is correct. (CF-Root-SGS3-v6.4.tar)
And how are u flashing official rom? which files are u using?
i'm using that root file you mentioned.
I also tried flashing another stock rom, 4.1.2 but didn't work.
ficti0n851 said:
Post the filename of the cfroot you flashed as well.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tried odin today with the CF-Root-SGS3-v6.4.tar
this is what i got
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Restarted phone, and as usual everything is fine, phone works normally other than some bugs i imagine the rom has.
http://forum.xda-developers.com/showthread.php?t=2214684
Sent from my GT-I9300 using xda app-developers app
lefttobleed said:
http://forum.xda-developers.com/showthread.php?t=2214684
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried that already, odin won't let me flash either a root or another rom even if its stock.
NO1 else haves a remote idea of what is happening to me?
i need to flash again cuz that damn JB leak is draining all my battery in 2/3 of my day....
Yeah, now my phone is softbricked with the Firmware upgrade encountered an issue message. Lucky me!
Andrew_spiegel said:
Yeah, now my phone is softbricked with the Firmware upgrade encountered an issue message. Lucky me!
Click to expand...
Click to collapse
Are you saying softbricked not booting or just that Kies no longer recognizes firmware due to conflicting firmware codes ??
jje
JJEgan said:
Are you saying softbricked not booting or just that Kies no longer recognizes firmware due to conflicting firmware codes ??
jje
Click to expand...
Click to collapse
Not booting, stuck at the "Firmware update has encountered an issue..." screen.
Can get into download mode only, not recovery. Cant flash cuz NAND write error fails on odin.
Thread reads as Nand damaged probably due to partition information table part of the nand faults .
jje
Could I get some help with my Samsung Ace? I am at a loss as to what to do next.
Early last year, I got a Samsung Galaxy Ace S5839i from Three in the UK. Like everyone with this model, I had problems with the limited storage space and bloatware, even after moving apps to the SD card. After some research, I downloaded Titanium and used it to remove the bloatware. Unfortunately, I wasn't careful enough and I must have deleted one or more core files, because now I get the 'android.process.acore' error message very frequently and I am unable to receive/make calls or receive/send text messages.
I have been looking on several android forums, but I have to say I find all the terminology confusing: ROMS, kernels, Odin, SplitFus, flashing – help!
After trying many things suggested on various threads in the forums (all unsuccessfully), I really just want to go back to the way the phone was originally, and then try again with Titanium (more carefully this time!). Is that even possible?
One potentially useful thing that I have learned from the forums is that I could use firmware for the 5830i, even though my phone is the 5839i. The Three firmware for the model 5839i is available on Sammobile, so I would prefer to use that.
However, when I tried to load the 5839i firmware file using Odin 3.09, this happened:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone guide me through this? I just want to get back to how my phone was before I started using Titanium (so I can try Titanium again, but more carefully this time!). NB For some reason, I cannot use KIES.
What should I do?
OhHowWeLaughed said:
Could I get some help with my Samsung Ace? I am at a loss as to what to do next.
Early last year, I got a Samsung Galaxy Ace S5839i from Three in the UK. Like everyone with this model, I had problems with the limited storage space and bloatware, even after moving apps to the SD card. After some research, I downloaded Titanium and used it to remove the bloatware. Unfortunately, I wasn't careful enough and I must have deleted one or more core files, because now I get the 'android.process.acore' error message very frequently and I am unable to receive/receive calls or receive/send text messages.
I have been looking on several android forums, but I have to say I find all the terminology confusing: ROMS, kernels, Odin, SplitFus, flashing – help!
After trying many things suggested on various threads in the forums (all unsuccessfully), I really just want to go back to the way the phone was originally, and then try again with Titanium (more carefully this time!). Is that even possible?
One potentially useful thing that I have learned from the forums is that I could use firmware for the 5830i, even though my phone is the 5839i. The Three firmware for the model 5839i is available on Sammobile, so I would prefer to use that.
However, when I tried to load the 5839i firmware file using Odin 3.09, this happened:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone guide me through this? I just want to get back to how my phone was before I started using Titanium (so I can try Titanium again, but more carefully this time!). NB For some reason, I cannot use KIES.
What should I do?
Click to expand...
Click to collapse
go search your odin problem on google.
after successful went into the originally rom i recommend you to flash simplicity v4 as it only take 4 MB on Internal Memory and you will have a lot of free memory and you will not need to risk with that titanium
go here for unbrick your device .
http://forum.xda-developers.com/showthread.php?t=2283926
ѕєηт ƒяσм αcє-ι-cσσρєяνє
amolgosavi said:
go here for unbrick your device .
http://forum.xda-developers.com/showthread.php?t=2283926
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Click to expand...
Click to collapse
I followed all of the instructions in that thread, but no luck. I used firmware for both the S5839i (single file) and the S5830i (multi files) in each of Odin 1.85, 3.07, and 3.09 (so, six attempts in total) but each combination either failed or, in the case of Odin 1.85, did not move out of Setup Connection.
What is going wrong? Is there something really obvious that I am failing to do? I have the USB Debugging mode enabled on my phone. What else am I doing wrong?
OhHowWeLaughed said:
I followed all of the instructions in that thread, but no luck. I used firmware for both the S5839i I(single file) and the 5830i (multi files) in each of Odin 1.85, 3.07, and 3.09 (so, six attempts in total) but each combination either failed or, in the case of Odin 1.85, did not move out of Setup Connection.
What is going wrong? Is there something really obvious that I am failing to do? I have the USB Debugging mode enabled on my phone. What else am I doing wrong?
Click to expand...
Click to collapse
Follow this.
http://forum.xda-developers.com/showthread.php?t=1840645
Watch the video, do it exactly as he does but use open Australia.
OhHowWeLaughed said:
I followed all of the instructions in that thread, but no luck. I used firmware for both the S5839i (single file) and the S5830i (multi files) in each of Odin 1.85, 3.07, and 3.09 (so, six attempts in total) but each combination either failed or, in the case of Odin 1.85, did not move out of Setup Connection.
What is going wrong? Is there something really obvious that I am failing to do? I have the USB Debugging mode enabled on my phone. What else am I doing wrong?
Click to expand...
Click to collapse
i think you dont understand correctly..just go to this link and follow the instruction..i think this time it will work..
www.firealby.blogspot.in/2013/05/how-to-flash-stock-rom-on-samsung.html?m=1
ѕєηт ƒяσм αcє-ι-cσσρєяνє
amolgosavi said:
i think you dont understand correctly..just go to this link and follow the instruction..i think this time it will work..
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Click to expand...
Click to collapse
I followed your instructions completely, and it worked! THANK YOU VERY MUCH!
Of all the times I have done this, this was the first time I used a bootloader file. Is that what made the difference? Or perhaps it was something else. Right now, I don't care, because I can finally use my phone again! )
Thank you very much for your help on this thread, and for your easy-to-follow videos.
OhHowWeLaughed said:
I followed your instructions completely, and it worked! THANK YOU VERY MUCH!
Of all the times I have done this, this was the first time I used a bootloader file. Is that what made the difference? Or perhaps it was something else. Right now, I don't care, because I can finally use my phone again! )
Thank you very much for your help on this thread, and for your easy-to-follow videos.
Click to expand...
Click to collapse
sooo finally you unbricked your device.. :thumbup:
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Envy-X said:
Follow this.
Watch the video, do it exactly as he does but use open Australia.
Click to expand...
Click to collapse
I did, and it worked! Thank you!
amolgosavi said:
sooo finally you unbricked your device.. :thumbup:
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Click to expand...
Click to collapse
Aaaaaaaand, the S5830i firmware seems to have a lot less of the ridiculous bloatware that came with the original S5839i firmware, so I'm even more happy...
OhHowWeLaughed said:
Aaaaaaaand, the S5830i firmware seems to have a lot less of the ridiculous bloatware that came with the original S5839i firmware, so I'm even more happy...
Click to expand...
Click to collapse
you can flash custom roms also of s5830i
ѕєηт ƒяσм αcє-ι-cσσρєяνє
Hello!
I'm attempting to root my S4 and eventually flash it with a custom ROM. However, I'm having a lot of trouble getting it to root. I'm using an online guide which flashes another kernel (NC5) using Odin then roots using towelroot and finally flashing back to my original kernel (NK1). The problem is that when I originally try to flash the NC5 kernel using Odin, I get an error. I've tried looking online for a solution but have found nothing so hopefully someone on here can assist me.
I'm running 4.4.2 on a SCH-I545VRUFNK1 and using Odin v3.09 but have also tried v3.04 to no avail. I've taken the battery out and waited 10 minutes, but that didn't work. Here is the output from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Thank you to all in advance!
Niotic said:
Hello!
I'm attempting to root my S4 and eventually flash it with a custom ROM. However, I'm having a lot of trouble getting it to root. I'm using an online guide which flashes another kernel (NC5) using Odin then roots using towelroot and finally flashing back to my original kernel (NK1). The problem is that when I originally try to flash the NC5 kernel using Odin, I get an error. I've tried looking online for a solution but have found nothing so hopefully someone on here can assist me.
I'm running 4.4.2 on a SCH-I545VRUFNK1 and using Odin v3.09 but have also tried v3.04 to no avail. I've taken the battery out and waited 10 minutes, but that didn't work. Here is the output from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Thank you to all in advance!
Click to expand...
Click to collapse
Have you tried using a different USB cable? Sometimes I have had this happen, I switched cables and it worked fine after, but this may not be your specific issue.
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
Also, are you using the Kernel or full image? Look at file size as the Kernel is fairly small compared.
Yea, I did try that! I tried it with two different cables and two different USB ports but didn't change anything unfortunately.
Niotic said:
Yea, I did try that! I tried it with two different cables and two different USB ports but didn't change anything unfortunately.
Click to expand...
Click to collapse
I would say maybe try another PC if available.
What if there isn't another pc available?
What is the file size of the image you are trying to flash?
Flash a stock nc5 image, then use towelroot. Odin may not be liking the image... Also, sometimes the phone has to be flat. That helps me A LOT in my constant Odin Flashes.
XxD34THxX said:
Flash a stock nc5 image, then use towelroot. Odin may not be liking the image... Also, sometimes the phone has to be flat. That helps me A LOT in my constant Odin Flashes.
Click to expand...
Click to collapse
Can't flash a stock image of NC5 as he is on NK1. He CAN flash the NC5 kernel, use towelroot to root, and then flash the NK1 kernel again.
I had this same problem. I am pretty sure I had the phone flat on my table instead of on my PC... That didn't help in your case... Use Odin 3.07
The file size is 8,691 KB. And this is exactly what I am trying to do! Flash the NK1 Kernel then use towel root then flash back to my original kernel of NC5. I'll try to use Odin 3.07 and let y'all know how it goes.
I apologize for the delayed response, it's the end of the school year and things are getting pretty hectic. Please be patient with me!
Niotic said:
The file size is 8,691 KB. And this is exactly what I am trying to do! Flash the NK1 Kernel then use towel root then flash back to my original kernel of NC5. I'll try to use Odin 3.07 and let y'all know how it goes.
I apologize for the delayed response, it's the end of the school year and things are getting pretty hectic. Please be patient with me!
Click to expand...
Click to collapse
Just tried Odin 3.07 with no luck, my phone is flat and I tried two different USB ports with two different chords. What's my next option?
Niotic said:
The file size is 8,691 KB. And this is exactly what I am trying to do! Flash the NK1 Kernel then use towel root then flash back to my original kernel of NC5. I'll try to use Odin 3.07 and let y'all know how it goes.
I apologize for the delayed response, it's the end of the school year and things are getting pretty hectic. Please be patient with me!
Click to expand...
Click to collapse
Its no problem man. I actually jump on XDA when I am at work, in between selling phones and monthly renewals. I recently had the same issue and changing my cable solved it for me.
Thanks for understanding! Yea I've tried two different cables as stated before but no luck. I'm starting to get the feeling this root isn't going to work -_-
Niotic said:
Thanks for understanding! Yea I've tried two different cables as stated before but no luck. I'm starting to get the feeling this root isn't going to work -_-
Click to expand...
Click to collapse
What, if you don't mind my asking, do you use root for?
Sent from my SCH-I545 using XDA Free mobile app
Well recently my battery life has been atrocious to say the least so I was hoping on using a root to improve that further controlling the resources that some apps use even while not in use. For example facebook is constantly pulling a massive amount of resources which I believe is partially related to my bad battery life.
I also am a bit obsessed with my UI and love changing it around in order to get better funtionality as well as increasing it's visual appel. I feel that touchwiz is ugly and would like to flash something over it in order to get rid of it and allow further customization of my UI.
Have you tried unchecking Auto Reboot in Odin options?
Another way, I've got this rooting problem on my Samsung E5:
...
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Luckily I found a thread in AndroidForums (I can't post the link here because of XDA's rules). Not totally the same but I think it could help. Belong to it, maybe your reactivation lock is on. Turn it off (Menu > Settings > General > Security > Reactivation lock, uncheck) and retry.
Thanks for the suggestion zhaona; unfortunately, it did not work. Does anyone else have some suggestions?
So I was given this phone that is stuck in download mode and am having quite a few problems getting it flashed with odin.... it seems to fail every time. not sure on the original android version it was rooted on .. The only information I was given is that it was rooted at one point and then they did a factory wipe getting it stuck in download mode... Seeing as Im new to this whole scene any help would be much appriciated
Tried 3 different firmwares from a post here
and also tried to get kies to recognize the phone .. It will not ,It is stuck at connecting
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Update:
On download screen : sw rev check fail....
If i have to choose a certain version of the firmware is there anyway to check the version I need without having to turn on the phone?
Does the sw rev check fail error mention a fuse and or binary with a number next to it?
Matthew M. said:
Does the sw rev check fail error mention a fuse and or binary with a number next to it?
Click to expand...
Click to collapse
fuse 0 binary 5
So .. I got the phone working by doing a firmware upgrade or initialization in kies, So I suppose It is fixed now .. I would still like to know what the problem could be using odin? I tried 5 different firmware upgrades from oldest to newest and couldnt get it to work. It is still kinda vexxing me, im sure I was doing somthing wrong . Any extra insight would be helpful to avoid this headache in the future?
You should go back to kies and see what version it flashed. That way if this ever happens again you can download that version and flash it through odin
Deleted
Serioussamuel said:
So .. I got the phone working by doing a firmware upgrade or initialization in kies, So I suppose It is fixed now .. I would still like to know what the problem could be using odin? I tried 5 different firmware upgrades from oldest to newest and couldnt get it to work. It is still kinda vexxing me, im sure I was doing somthing wrong . Any extra insight would be helpful to avoid this headache in the future?
Click to expand...
Click to collapse
Can you explain how you did this? I am running into a similar problem and neither a firmware upgrade nor a kies initialization is working.
Same problem here, I also don't know what my phone bootloader or firmware, I'm also stock in download mode...hope someone can answer and help us...