Today morning i tried to update MCU with kld5 v2.97. Previously i had kld6 v2.91.
Afte that unit never booted again. All i get is a quick flash of malaysk boot logo for one second and then black screen with devices button lighting from blue to pink all the time.
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Is there any way to flash old MCU again? Is there any tool to flash MCU from pc?
Billkaza said:
Today morning i tried to update MCU with kld5 v2.97. Previously i had kld6 v2.91.
Afte that unit never booted again. All i get is a quick flash of malaysk boot logo for one second and then black screen with devices button lighting from blue to pink all the time.
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Is there any way to flash old MCU again? Is there any tool to flash MCU from pc?
Click to expand...
Click to collapse
try to flash MCU kld6 v2.91 from recovery
but i cant get into recovery
Billkaza said:
but i cant get into recovery
Click to expand...
Click to collapse
it's an img file so you could flash it in same way of firmware
Billkaza said:
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Click to expand...
Click to collapse
rockchp batch tool doesnt leave me is there any other tool i could try?
I get loading firmware failed error.
sorry I cant help you more...
Case closed
Really dont know how but after several firmware flashes it came to life again.
Holding down reset whilst pressing power, releasing rest then releasing power does not work ? Do you ahve a power button ?
I have a power i tried booting to recovery but this didnt seem to fix my problem. Anyway as it is fixed i will never now what went wrong
Thanks guys for help
Billkaza said:
Today morning i tried to update MCU with kld5 v2.97. Previously i had kld6 v2.91.
Afte that unit never booted again. All i get is a quick flash of malaysk boot logo for one second and then black screen with devices button lighting from blue to pink all the time.
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Is there any way to flash old MCU again? Is there any tool to flash MCU from pc?
Click to expand...
Click to collapse
Could you post your steps getting your computer to read the radio without recovery. Thanks!!
I'm very happy that your unit works again.
Just un-bricked my device with these steps!
http://forum.xda-developers.com/and...d-kgl-unit-t3457538/post68656680#post68656680
Related
Hi friends,
I think I have bricked my X10i B'cuz the phone is struck at the Sony Ericsson logo.
What I tried to do?
I was in tripndoid MIUI, so I wanted to upgrade the rom to black edition, so I tried to unlock the boot-loader, I had successfully downgraded the firmware and unlocked the boot-loader and also updated to custom kernel (doomloard)
After that I got in CWM recovery mode and installed the .zip file after cleaning the system cache and dalviks cache, Now the phone refuses to start nor get into flash mode.
I tried removing the battery and reinstalling the battery, but as soon as I put the battery back on the phone lights up at the Sony logo.
Even If it try to charge the phone from the electrical socket, the led of the phone does not turn on, it still gets into the Sony logo and stops there.
The phone gets recognized in the flash tool, its tells the phone is in ADB mode. I cannot put the phone on flash mode anymore.
I tried looking in various threads, but could not get a concrete answer, please help. I have limited access to internet, So i do not have PC companion to try and repair my phone. Is there any way that I can get back my phone alive.
Edit: I just plugged it in, I can get into flash mode.. Anyone please help me how can I flash back to any rom..
Did you flash the upgrade firmware after downgrading and unlocking firmware? Sometimes the Kernel doesn't support certain ROMs as well and it can't boot into the system.
The easy method of flashing the stock SE firmware is by using the X10 Flashtool. Simply download and install it (you might have to turn off anti-virus software as it's listed as a virus of some kind) and install the stock SE 2.3.3 firmware and press flash. Instructions will pop up and your phone will be as good as new. It does mean that you lose everything like ck, recovery, unlocked bootloader, etc.
You can find the Flashtool and the stock firmwares here:
http://forum.xda-developers.com/showthread.php?t=920746
EDIT: To do flashing, you will have to turn the phone off. The X10 may turn on when you reinsert the battery too soon, like you have described. Generally, you should take the battery out for about 5 seconds before reinserting it so the phone actually turns off and doesn't turn back on.
Good luck and don't forget to hit thanks if this helped in some way
@ Panzerfaust101 - I have already hit thanks
I figured it out myself.. here is how I made it through..
Problem - was in the Kernel, just out of some instinct I downloaded Doom's kernel v.006 and some how got the phone into flash mode and flashed the kernel.
After that I was able to navigate into recovery and install the new ROM, but my problem did not stop. Now the phone got struck in the new RoM's startup screen.
So again I downloaded the right version of Doom's kernel for the RoM and flashed it again. So I got the problem solved, but I realized the phone radio was not working, So I again downgraded the firmware and ran the bootunlocker and then updated the phone back to the right kernel.
Now I am able to enjoy the new ROM.
Yeah, it should be your ck. I flashed a ck before (can't remember which one), but for one reason or another, I couldn't get cwm-based recovery working, so I tried another one which couldn't boot anything up properly, so I'm back on stock 2.3.3 (was on the MIUI-based BlackHD Edition. Brilliant ROM btw) waiting for beta+ CM9 ROM for X10 to be released
Btw, for future reference, can you link me the exact Doom ck that you used? I'm probably going to install a custom ROM on mine again and I need to know one that will be guaranteed to work without a problem. Thanks
Cool, you will need Doom's kernal - X10_FXP_DooMKernel-v05a-BootManager-v1.3
Also hope you have the bootlocker unlocked, if not you need to use X10_aZuZu_Kernel_Downgrade_Generic firmware and unlock the boot loader after that you can directly upgrade the firmware to Doom's kernel and install the RoM.
Thanks to DooM and aZuZu for the files.
Kernal link
http://forum.xda-developers.com/showthread.php?t=1362392&page=90
i've your same problem...how i can plug-in in flash mode?
Try this trick!!!
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 5-10 secs
You should have quick fingers, so that you should select the firmware or any update within those ten sec's. Keep trying this will work... BTW its was the only way I could revive my phone.
but pc don't recognize my x10...
Shindoruk said:
but pc don't recognize my x10...
Click to expand...
Click to collapse
Are you using a flashtool or Pc Companion? Also please reinstall the adb drivers to your PC and check again.
amrth said:
Try this trick!!!
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 5-10 secs
You should have quick fingers, so that you should select the firmware or any update within those ten sec's. Keep trying this will work... BTW its was the only way I could revive my phone.
Click to expand...
Click to collapse
Is that the method you use to flashing? I've seen it quite a lot on these forums, but I haven't personally used it before and I've been curious as to what they did. Generally, don't you prepare to flash by pressing the flash button on Flashtool and following the instructions that pop up? i.e. disconnect and turn off phone, hold back button, reconnect phone. I've always used this method for flashing. Doesn't it work properly for some devices?
Also, if the battery's out and the flashing takes 10+ seconds, what happens? does it stay on once it's detected a device flashing the firmware?
Panzerfaust101 said:
Is that the method you use to flashing? I've seen it quite a lot on these forums, but I haven't personally used it before and I've been curious as to what they did. Generally, don't you prepare to flash by pressing the flash button on Flashtool and following the instructions that pop up? i.e. disconnect and turn off phone, hold back button, reconnect phone. I've always used this method for flashing. Doesn't it work properly for some devices?
Also, if the battery's out and the flashing takes 10+ seconds, what happens? does it stay on once it's detected a device flashing the firmware?
Click to expand...
Click to collapse
The ten seconds isnt a standard just a rough idea. Yeah the flashtool way is proper way to enter flashmode it just that the USB socket on this model isn't the best, many people had problems and basically just found their own way around it.
Sent from my X10i using XDA App
Pleeease, I need help.
My x10 enters in flash mode with the green led, but it still only 10 seconds on, after that change to SE logo and that's it...I think that it's because it ran out of battery...any solution for this!?!?
After that I can leave it connected by USB but still being with the SE logo and it doesn't seem that the battery is charging.
Even if I take off the battery, put in again and simply connect it by USB the SE logo shows again...I don't know what else to do...
This is Flash tool log:
11/035/2012 15:35:25 - INFO - Device connected in flash mode
11/035/2012 15:35:44 - INFO - Device disconnected
11/035/2012 15:35:45 - INFO - Device connected with USB debugging off
11/035/2012 15:35:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
Did you flash the upgrade firmware after downgrading and unlocking firmware? Sometimes the Kernel doesn't support certain ROMs as well and it can't boot into the system.
The easy method of flashing the stock SE firmware is by using the X10 Flashtool. Simply download and install it (you might have to turn off anti-virus software as it's listed as a virus of some kind) and install the stock SE 2.3.3 firmware and press flash. Instructions will pop up and your phone will be as good as new. It does mean that you lose everything like ck, recovery, unlocked bootloader, etc.
You can find the Flashtool and the stock firmwares here:
http://forum.xda-developers.com/showthread.php?t=920746
I wish i can download the .ftf from the link that u had provided , please can any1 provide me a correct link, so i can unbrick my phone.
Panzerfaust101 said:
Is that the method you use to flashing? Doesn't it work properly for some devices?
Also, if the battery's out and the flashing takes 10+ seconds, what happens? does it stay on once it's detected a device flashing the firmware?
Click to expand...
Click to collapse
Kind of a late reply, apologies for that. Yes I followed the same method as listed. Some times your method works but not always!!!
If the battery is below 5% i believe the system will not get you into the flash mode. Since flashing hardly takes few seconds, I suppose the available battery will hold on.
BTW my trick starts only after I get into the flash tool
laneyofdeath said:
The ten seconds isnt a standard just a rough idea. Yeah the flashtool way is proper way to enter flashmode it just that the USB socket on this model isn't the best, many people had problems and basically just found their own way around it.
Click to expand...
Click to collapse
+1, I agree to this.
_CoRo_ said:
Pleeease, I need help.
My x10 enters in flash mode with the green led, but it still only 10 seconds on, after that change to SE logo and that's it...I think that it's because it ran out of battery...any solution for this!?!?
Click to expand...
Click to collapse
I don't think its cuz of a battery issue, It cuz of kernel issue. Kindly give a backdrop of what you are trying to do? Might be helpful to correlate the actions.
uglyprince said:
I wish i can download the .ftf from the link that u had provided , please can any1 provide me a correct link, so i can unbrick my phone.
Click to expand...
Click to collapse
Yes mate I tried the same tool that you have posted. Yeas I did upgrade the firmware to custom kernel and then went ahead with the installation.
Try this link : http://www.mediafire.com/?3ol6gpykaa5acwo
Thank 7hr08ik for this link. Please use the FXp kernal, not DooM.
Major update is that DooM kernel version that I had installed was completely a phone crasher, So I had to update the kernal and the RoM for a newer version.
Right now I am using FXP kernal with v3 of the blackedition HD v1.3 RoM, So far So good
Cheers
Amrth
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Varjo said:
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Click to expand...
Click to collapse
You can Try this:
1.) Pull out battery
2.) Put it in again
3.) Press Vol up + home + power
4.) When the Samsung Logo appears let it off
I think you press the Buttons too long.
I had the same problem!
S1ay3r666 said:
I think you press the Buttons too long.
Click to expand...
Click to collapse
i really tried everything, it's not working. btw with i am stuck at the very first image, where it says "samsung Galaxy sII GT-I9300".
i dont think it's just the way i press the buttons because i can reach it on my s1 and s2 without a problem, it's just not working on this device.
could some setting like "nand erase all" in odin help? in other threads there is sometimes mentioned that the internal file system might be screwed up and in those cases a simple odin reflash does not help anymore...
Nand erase will usually hard brick it. Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Click to expand...
Click to collapse
thx, but i already did that (multiple times) and flashing via odin always succeeds. then the phone reboots and is stuck at the first samsung galaxy s.. screen. twice i managed somehow to get into recovery (after flashing cwm6) but it then randomly rebooted.
and i dont think that the power button is stuck because when i am in download mode it is perfectly fine it never reboots itself unexpectedly.
Had a similar issue on my tab2 p3100. It all happened when I tried flashing a custom recovery from rom manager.
A bad flash of anything related to recovery or bootloader could be a probable cause.
I remember a knowledge share on one of the threads describing this issue and as mentioned on it all I had to do is this:
1) switch off the device and plug in the charger. This would light up the display showing you the charging status. The status has to show if at least your bootloader part of the phone is fine.
2) plug out the charger and immediately press the three buttons (home + vol up + power) get into recovery mode. This step has to work and help you get to recovery mode.
***Note : the interval within which this step has to be performed is too short since the display would turn off immediately as soon as you plug out the charger. A bit tricky too so you have to be fast. If this misses getting you into recovery, pull out the battery and put it back again. Repeat step1 and 2 again.
3) upon successfully getting into recovery, perform wipe data, cache and select reboot phone from option available on recovery again.
Allow the device to boot. This could take a while since you have performed a data wipe and may prompt for first time set up.
I was able to restore functionality on my tab after these steps and like ppl learn from their mistakes, I then learnt that recoveries and bootloaders are things that needs to be done with a pc only.
Worth a try if you have tried other alternatives and found no go. may help. Who knows..
all the best.
thats also not working. i tried to get into recovery since two days now...
i also tried the steps from this thread: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
but again, after i flash the cf-root (successfully) the phone does neither boot into recovery by itself nor can i do it by hand...
its crazy... in download mode i can see the model number (GT-I9300) and i thought as long as the model number is there and i can enter download mode there should be a way to recover the device.
but i cannot think of anything to try that i have not done yet
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Click to expand...
Click to collapse
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Varjo said:
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gala...-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..
anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?
Hello guys,
so I had installed RROS 8.1 on my Honor 9 STF-L09, but capacitive buttons and flashlight didn't work, so i decided to roll back to B120 via HWOTA in recovery, I think I chose a wrong stock recovery image so there went something wrong and the phone won't boot up..
It was stuck at the Bootloader unlocked - Your device is booting now... screen, I only can access fastboot mode.
I've already tried every unbrickng method I know. First I tried to unbrick it via Multitool and stock firmware and recovery but this didn't help, I did just get another screen where I was stuck(Error mode: func11: recovery , load failed or sth like that). I also tried flashing TWRP but it doesn't work, it says it was successfully installed, just like with multitool, but i am still stuck. Also tried flashing Stock recovery image and then using dload sd card method but it won't even go to Emui restoring screen.. I actually just tried to flash all the important image files from update.APP (which I know how to flash via fastboot), but it didn't do anything. After trying again via Multitool I am again stuck at the 'unlocked screen'.
If somebody could help i would be so thankful, I don't know what to do now.. THANK YOU
Sorry for my bad english I am a student from germany
Lord Juggelmann said:
Hello guys,
so I had installed RROS 8.1 on my Honor 9 STF-L09,
Click to expand...
Click to collapse
Which region ? C432 ?
Which version B36x ?
Lord Juggelmann said:
but capacitive buttons and flashlight didn't work, so i decided to roll back to B120 via HWOTA in recovery,
Click to expand...
Click to collapse
With which HWOTA ? 'HWOTA 8 to 7 rollback' ?
Lord Juggelmann said:
I think I chose a wrong stock recovery image
Click to expand...
Click to collapse
Which one ?
oslo83 said:
Which region ? C432 ?
Which version B36x ?
With which HWOTA ? 'HWOTA 8 to 7 rollback' ?
Which one ?
Click to expand...
Click to collapse
Yes, C432, i installed it on B363 bur don't know if it was the same at RROS.
Now that you ask I'm not that sure it could also have been the mistake that I maybe used HWOTA7 which I used to upgrade to Oreo B363. I tried to rollback to B130.
It was a STF_RECOVERY_NoCheck.img Recovery I think it actually was the Nougat version but could have also been oreo...
Thanks for replying btw
Try to install TWRP from this thread:
https://forum.xda-developers.com/showpost.php?p=75680308
Dpesnit install successfully ? Can you boot twrp now ?
oslo83 said:
Try to install TWRP from this thread:
https://forum.xda-developers.com/showpost.php?p=75680308
Dpesnit install successfully ? Can you boot twrp now ?
Click to expand...
Click to collapse
Installed successfully but still same result, can't boot into recovery..
You are trying with usb unplugged and with vol+ button ?
oslo83 said:
You are trying with usb unplugged and with vol+ button ?
Click to expand...
Click to collapse
Everytime I try to do without usb plugged I will get a red sign with a lightning that tells me battery is empty, this won't change if I charge it, could be an error but also could have to do something that it always stays on this booting now screen when plugged in and not in fastboot mode. Actually this Battery sign pops up everytime I shut it down when I try to boot(just not with fastboot), even if plugged in but then it works after a few seconds. I asked Multitool for Battery voltage in fastboot and got this answer: ...
(bootloader) 5298mv
OKAY [ 0.012s]
finished. total time: 0.020s
Btw I just noticed that in stuck screen red led lights up like every 2-3sec
Thank you for the fast answer
Leave the phone overnight (around 12 hours) to be charged with the original charger then try again on the computer
to restore it.
It happens to myself with a Motorola phone years ago.
mihaidenis said:
Leave the phone overnight (around 12 hours) to be charged with the original charger then try again on the computer
to restore it.
It happens to myself with a Motorola phone years ago.
Click to expand...
Click to collapse
I will try, what type of restoring do you mean?
Edit: Didn't work for me.. Still tells me battery is empty. I think it has to be a software issue or so:crying:
You can restore it using a paying software called DC-Phoenix.
I own a license, PM me if you need further help.
(this all happend 3 years ago and im asking now as i need a backup phone )
i flashed twrp and pixel experience well dum me clicked reset in pixel experience settings then it bootlooped into twrp for eternity now dum 2019 me thought that wiping twrp from fastboot would force it to boot into the system well it didnt work and even now whatever i try it does not boot (it just vibrates but will not boot i tried all combinations possible and also tried the miraclebox guide which didnt work)
Zainullahk1234 said:
(this all happend 3 years ago and im asking now as i need a backup phone )
i flashed twrp and pixel experience well dum me clicked reset in pixel experience settings then it bootlooped into twrp for eternity now dum 2019 me thought that wiping twrp from fastboot would force it to boot into the system well it didnt work and even now whatever i try it does not boot (it just vibrates but will not boot i tried all combinations possible and also tried the miraclebox guide which didnt work)
Click to expand...
Click to collapse
Try first charging the battery and installing the stock ROM (the latest) through SP Flash tool.
SubwayChamp said:
Try first charging the battery and installing the stock ROM (the latest) through SP Flash tool.
Click to expand...
Click to collapse
ill try that but i dont expect it to work due to it not booting
Zainullahk1234 said:
ill try that but i dont expect it to work due to it not booting
Click to expand...
Click to collapse
Well, this is the whole idea to flash a stock ROM, if it is an issue at software level it has to solve it. Check carefully some things that could help to diagnose the brick level, like device is vibrating, device can boot till bootanimation, logo is showing some letters and so on.
SubwayChamp said:
Well, this is the whole idea to flash a stock ROM, if it is an issue at software level it has to solve it. Check carefully some things that could help to diagnose the brick level, like device is vibrating, device can boot till bootanimation, logo is showing some letters and so on.
Click to expand...
Click to collapse
it wont do anything but vibrate when i hit the power button
Zainullahk1234 said:
it wont do anything but vibrate when i hit the power button
Click to expand...
Click to collapse
Try flashing the firmware and see what happens, and if, which modes are available for you, fastboot, recovery.