YOU MUST HAVE ACCESS TO TWRP TO PROCEED
THIS WILL NOT WORK IF YOU DON'T HAVE TWRP
I'M NOT RESPONSABLE IF THIS PROCESS CREATED A THERMAL NUCLEAR DEVICE
AND / OR TURN YOU INTO FIRESTORM.
NOT RESPONSABLE IF SOMETHING HAPPEN DURING THIS INSTALLATION OR IF
YOU DO A MISTAKE DURING THIS PROCESS
READ, READ , READ , READ AND BE CAREFULL WITH THE COMMAND LINES
PROCEED ON YOUR OWN RISK
READ, READ, READ BEFORE PROCEEDING....
Hi A7 Users
--------------
Here we are with a new / excited finding ( thanks @Unjustified Dev )for ALL of us A2017U and A2017G (IS GETTING OFFICIAL UNLOCK AND THIS METHOD NOT TESTED YET,ANY VOLUNTEER?)
and is about UNLOCKING the Bootloader for those who are stock B20 or B27 + Lock Booloader.
Only IMPORTANT requirement is you need to have TWRP install, so if you don't have TWRP install here is the link
and you just NEED TO INSTALL TWRP and if you haven't back-up your STOCK boot.img is the right time to do so
Click Here on How to Flash TWRP with Lock Bootloader, Thank You @tennear
NOTE : THIS PROCEDURE WILL ERASE , I REPEAT WILL ERASE YOUR DATA + INTERNAL STORAGE.
SDCARD IS SAFE.
Steps :
---------
1- Download this File TWRP_UnlockBootloaderPackage_by_DrakenFX.zip and move to your SDCard.
2- Enable "OEM UNLOCKING" under Developer Options
3- Reboot to TWRP
Code:
adb reboot recovery
4- Lets make sure your device is detected
Code:
adb devices
Great let keep going.
5- Open Command and navigate to your adb location.
6- Type the following
* BACK-UP AND PULL CURRENT FASTBOOT IMAGE
Code:
adb shell dd if=/dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img
adb pull /sdcard/fbop_lock.img
* FLASH TWRP_UnlockBootloaderPackage_by_DrakenFX.zip
Awesome you have backup and flash the bootloader unlock package file but wait we're done yet
7- Type the Following
Code:
adb reboot bootloader
8- Lets make sure device is present
Code:
fastboot devices
9- Now let's Unlock the Bootloader (THIS WILL WIPE DATA+INTERNAL STORAGE)
Code:
fastboot oem unlock
10- You'll boot in TWRP once there do the following :
Code:
* tap [B]CANCEL[/B]
* tap [B]WIPE [/B]
* tap [B]FORMAT DATA[/B] and Follow the Instructions
11- Once done REBOOT
12- WHEN FULL BOOT GO BACK TO TWRP AND CREATE A BACK-UP AND KEEP IT SAFE
13- Have Fun you're now Bootloader Unlock With Stock B20 or B27 Software.
---------------------------------------------------------------------------------------
NOTE : A2017U.B27 Users Everytime you BOOT to System , Recovery, etc, etc you'll be getting a splash screen, JUST WAIT 5 SEC. and your device will boot to where you want to go.
---------------------------------------------------------------------------------------
If You Have the A2017G version and you are already on B03 you can follow step by @Starvirus
A2017G_B03 Unlock Bootloader Steps
---------------------------------------------------------------------------------------
CREDIT / Contributor
- @Unjustified Dev for testing in his Brand New just less than 3 hrs old A2017U and popping up in me the idea about this finding
- Thank you @regenwurm16 for Confirm New method working for A2017G
- Thank you @Starvirus for provide B03 steps
---------------------------------------------------------------------------------------
reserve 1
reserve 2
reserve 3
Mine
So.. this means unlocked bootloader for full flexibility but also OTA updates because it's still running stock?
So jelly. Stuck on B20_boot over here.
jpde said:
So.. this means unlocked bootloader for full flexibility but also OTA updates because it's still running stock?
Click to expand...
Click to collapse
about right, as long you have an Untouch/UnModded System + boot, so yeah
runderekrun said:
So jelly. Stuck on B20_boot over here.
Click to expand...
Click to collapse
@Unjustified Dev is uploading something that will help us go back to B20, I'll be testing this as soon is done and create a Thread for it, is just matter of time
DrakenFX said:
about right, as long you have an Untouch/UnModded System yeah
Click to expand...
Click to collapse
Holy crap, that sounds awesome. Huge thanks for all of your work! Hoping someone will be able to confirm that it works on the A2017G
Just wow!
Thats what I have talked about.
I hope it works on the A2017G version.
Is this reversible? Would ZTE somehow be able to tell if the bootloader was unlocked before when returning the device for a warranty?
legendarygizmo said:
Is this reversible? Would ZTE somehow be able to tell if the bootloader was unlocked before when returning the device for a warranty?
Click to expand...
Click to collapse
yes it is, just keep your fastboot img in a safe place backup is in OP part of the guide.
to revert back is very simple same step but instead using fastboot_unlock.img you use your fastboot backup and do the rest of the steps (wipe and so on)
DrakenFX said:
yes it is, just keep your fastboot img in a safe place backup is in OP part of the guide.
to revert back is very simple same step but instead using fastboot_unlock.img you use your fastboot backup and do the rest of the steps (wipe and so on)
Click to expand...
Click to collapse
Don't forget fastboot oem lock
Sent from my ZTE A2017U using Tapatalk
Unjustified Dev said:
Don't forget fastboot oem lock
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
annnddd that too
Do you think there will ever be a way to unlock without wiping internal?
Sent from my ZTE A2017U using XDA-Developers mobile app
SinisterXReaper said:
Do you think there will ever be a way to unlock without wiping internal?
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
Unfortunately it's necessary.
Sent from my ZTE A2017U using Tapatalk
SinisterXReaper said:
Do you think there will ever be a way to unlock without wiping internal?
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
been honest in Marshmallow, i remember in Lollipop you could unlock bootloader and keep everything but in Marshmallow everything change, any device i had that need bootloader unlock it wipes.
We essentially just forced ZTE's legal department's hand. They now have no way of voiding warranty with unlocked bootloader. Nice job guys!
Can I do this procedure with Axon Zte 7 A2017? (China Model)
Moderator Edit: @blessingme - it is not necessary or desirable to quote the entire OP. It can cause page loading issues with those on limited bandwidth or when mobile.
Thanks
blessingme said:
Can I do this procedure with Axon Zte 7 A2017? (China Model)
Click to expand...
Click to collapse
If you have twrp installed, let us know and don't forget to backup your fastboot.img
Sent from my ZTE A2017U using Tapatalk
Related
All is in the title
Who have unlocked the bootloader of Honor 7 in particular PLK-L01
I posted one request on the website Huawei Club / Service Centres ( http://en.club.vmall.com/forum.php?mod=viewthread&tid=32660&extra=page=1 )
Make one email [email protected]
And no ways and no answers
Any help
Root
http://forum.xda-developers.com/general/general/how-to-root-honor-7-t3170735
Does this guide work??
sheridan2000 said:
http://forum.xda-developers.com/general/general/how-to-root-honor-7-t3170735
Does this guide work??
Click to expand...
Click to collapse
Apparently Honor is not giving away any Bootloader unlocking code for the European version of the phone (PLK-L01).
Someone sent an email asking for his European phone and this is the answer he got back.
Dear Customer,
Thank you for contacting Huawei device.
Sorry that there have no bootloader unlock code for PLK-L01 items.
By default , you can do fastboot downloading for some images directly without Unlocking bootloader..
We suggest you'd better not root your device which would avoid the warranty and maybe cause it freeze.
Once again thank you for contacting Huawei device.
Best Regards.
Huawei Device Customer Care Team 3207
Moreover, according to a French website that interviewed Honor CEO (http://www.frandroid.com/marques/honor/306559_honor-pense-avons-reussi-pari-marque-desormais-connue), they're not planning on having any changes on their ROM policy keeping it private and closed as it's been for the Honor 6.
I guess the only way left is to have someone doing the hack on XDA. Knowing that the phone is quite new we just need to wait a bit before someone eventually gets on it =)
That makes me rethink about buying it...
A phone without root le barely useless
Successfully unlocked my PLK-L01 from Germany.
Used the Huawei Product ID Generator combined with the following page to unlock bootloader: http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
My question is, how can I root now? The guide from piskr I think is only for chinese phones?
Aurevo said:
Successfully unlocked my PLK-L01 from Germany.
Used the Huawei Product ID Generator combined with the following page to unlock bootloader: http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
My question is, how can I root now? The guide from piskr I think is only for chinese phones?
Click to expand...
Click to collapse
This tool was used in rooting Honor 6:
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Need to adapt tool to Honor 7.
warea said:
This tool was used in rooting Honor 6:
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Need to adapt tool to Honor 7.
Click to expand...
Click to collapse
I've used the tool to load the latest TWRP on my Honor 6 Plus, which I had updated to EMUI 3.1 (Android 5.1.1).
Exactly the same TWRP was loaded succesfully on a Mate 7 with EMUI 3.1.
So my guess is it will also work on the Honor 7.
From within TWRP recovery you can install the SuperSU.zip
So, who will be the first to try this stuff out?
Aurevo said:
So, who will be the first to try this stuff out?
Click to expand...
Click to collapse
Weren't you the guy from Germany who unlocked his bootloader?
It's pretty safe flashing the twrp recovery from sideload (with the multitool).
IF (!) you have the original recovery image at hand.
Because when it doesn't boot with twrp you can just get it back into the bootloader and flash stock recovery back.
Flow said:
Weren't you the guy from Germany who unlocked his bootloader?
It's pretty safe flashing the twrp recovery from sideload (with the multitool).
IF (!) you have the original recovery image at hand.
Because when it doesn't boot with twrp you can just get it back into the bootloader and flash stock recovery back.
Click to expand...
Click to collapse
So, errrrr. does anyone have that original stock recovery?
Because I've flashed TWRP and now I'm in a bootloop of TWRP. Model PLK-L01
Flow said:
Weren't you the guy from Germany who unlocked his bootloader?
It's pretty safe flashing the twrp recovery from sideload (with the multitool).
IF (!) you have the original recovery image at hand.
Because when it doesn't boot with twrp you can just get it back into the bootloader and flash stock recovery back.
Click to expand...
Click to collapse
Yes, that was me.
Than I will have a look after the recovery image, because I don't have it at the moment.
And the phone ist still very new at the German market. So maybe I have to wait for it. Otherwise it would be nice to post a link if someone has found an recovery image.
Gesendet von meinem PLK-L01 mit Tapatalk
Method to extract stock recovery was mentioned here: http://forum.xda-developers.com/showpost.php?p=57271243&postcount=5
Going through Honor 6 forums, you will find plenty of methods that will apply for Honor 7.
I've just rooted my Honor 7 PLK-L01 yesterday.
The unlock code was sent to me by support.
I've followed piskr tutorial but I was stuck in a TWRP recovery reboot loop.
You can solve the problem, by flashing back a stock recovery.
I found a stock recovery that worked for me in the link of this tutorial :
http://www.gizdev.com/rooting-huawei-honor-7-unlockbootloader-root-install-twrp-recovery/#
(direct link to the file http://d-h.st/R6lD of this tutorial)
This was not exactly the same "stock recovery" as the one that my phone had but it worked for me.
PS: I've not tested the TWRP recovery provided in this tutorial.
duky_duke said:
I've just rooted my Honor 7 PLK-L01 yesterday.
The unlock code was sent to me by support.
I've followed piskr tutorial but I was stuck in a TWRP recovery reboot loop.
You can solve the problem, by flashing back a stock recovery.
I found a stock recovery that worked for me in the link of this tutorial :
http://www.gizdev.com/rooting-huawei-honor-7-unlockbootloader-root-install-twrp-recovery/#
(direct link to the file http://d-h.st/R6lD of this tutorial)
This was not exactly the same "stock recovery" as the one that my phone had but it worked for me.
PS: I've not tested the TWRP recovery provided in this tutorial.
Click to expand...
Click to collapse
If it got stuck in bootloop with TWRP, then how did you root it?
Or did you mean that you unlocked the bootloader with the code?
Did you flash TWRP 2.8.7.0 recovery or another version?
Aurevo said:
Yes, that was me.
Than I will have a look after the recovery image, because I don't have it at the moment.
And the phone ist still very new at the German market. So maybe I have to wait for it. Otherwise it would be nice to post a link if someone has found an recovery image.
Gesendet von meinem PLK-L01 mit Tapatalk
Click to expand...
Click to collapse
Look over here:
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
You can flash TWRP 2.8.7.0 with this tool.
If @VirusPlus will take out the errors out of his script
Or put adb.exe, fastboot.exe and TWRP_2.8.7.0.img in the same folder on your computer and run this while having your Honor 7 connected via USB cable and ready in bootloader:
adb kill-server
adb reboot bootloader
fastboot devices
fastboot flash recovery TWRP_2.8.7.0.img
fastboot reboot
adb wait-for-device
adb reboot recovery
fastboot devices
Is there any recovery rom available for my model? Than I would give it a try.
Gesendet von meinem PLK-L01 mit Tapatalk
Flow said:
If it got stuck in bootloop with TWRP, then how did you root it?
Or did you mean that you unlocked the bootloader with the code?
Did you flash TWRP 2.8.7.0 recovery or another version?
Click to expand...
Click to collapse
The TWRP worked fine in adding SuperSU application but was unable to reboot to system.
Reboot system and power off buttons (even hard reset) always leaded to recovery.
(I was also unable to power off the phone)
I was just able to go into the bootloader by keeping pressed the volume down key at reboot start.
(and with the bootloader I could flash the stock TWRP that unstuck me)
I used the chinese TWRP from piskr tutorial.
Aurevo said:
Is there any recovery rom available for my model? Than I would give it a try.
Gesendet von meinem PLK-L01 mit Tapatalk
Click to expand...
Click to collapse
Should be in the download here:
http://www.gizdev.com/rooting-huawei-honor-7-unlockbootloader-root-install-twrp-recovery/#
if you want to preserve your stock recovery and still use TWRP, you can just boot into any recovery you want..
Just use the command :
Code:
fastboot boot <recovery image>
This will only boot the recovery on the device, and preserve your stock recovery.
deepsrd said:
if you want to preserve your stock recovery and still use TWRP, you can just boot into any recovery you want..
Just use the command :
Code:
fastboot boot <recovery image>
This will only boot the recovery on the device, and preserve your stock recovery.
Click to expand...
Click to collapse
And from there I can flash the SuperSU to get root without permanently have TWRP installed?
Hi guys,
Just recently purchased redmi note 3 pro 32gb from gearbest.
Phone should be international version with 7.2.13.00(LHOCNCL) preinstalled.
I found that I cannot flash any standard / developer ROM when official website by using built-in flash tool.
Any way to go from here? to at least receive OTA updates and in future I will like to try out Ressurection rom.
thanks.
Your ROM is unexsisting one, cooked by the seller.
You must flash a new one clean via EDL mode and MiFlash
This CN in the name means Chinese, and the numbers says that the rom is only modified to support more languages.
pakudaboy said:
Hi guys,
Just recently purchased redmi note 3 pro 32gb from gearbest.
Phone should be international version with 7.2.13.00(LHOCNCL) preinstalled.
I found that I cannot flash any standard / developer ROM when official website by using built-in flash tool.
Any way to go from here? to at least receive OTA updates and in future I will like to try out Ressurection rom.
thanks.
Click to expand...
Click to collapse
Yes ^he^ is correct . Download a rom from the mi website . And then flash the rom using MiFlash tool . then you should be able install roms .
s-u-f-f-e-r said:
Your ROM is unexsisting one, cooked by the seller.
You must flash a new one clean via EDL mode and MiFlash
This CN in the name means Chinese, and the numbers says that the rom is only modified to support more languages.
Click to expand...
Click to collapse
thanks guys.
Does this mean i need to wait for unlock bootloader first?
my MI account has previous device linked which I just removed now and set to my new phone.
might take weeks to get approval?
or is there a guy to by pass the locked bootloader?
thanks.
pakudaboy said:
thanks guys.
Does this mean i need to wait for unlock bootloader first?
my MI account has previous device linked which I just removed now and set to my new phone.
might take weeks to get approval?
or is there a guy to by pass the locked bootloader?
thanks.
Click to expand...
Click to collapse
This procedure works on locked bootloader.
http://en.miui.com/thread-235865-1-1.html
s-u-f-f-e-r said:
This procedure works on locked bootloader.
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
thanks so much for the info
will I lost my IMEI if I use miflash and choose FlashALL per that guide?
pakudaboy said:
thanks so much for the info
will I lost my IMEI if I use miflash and choose FlashALL per that guide?
Click to expand...
Click to collapse
No you wont loose your IMEI. Basically you are just flashing official MIUI Rom, your IMEI details are stored in another partition (non volatile) and FlashAll will not touch them.
You are safe to follow this guide, and by the way you would not be able to unlock the bootloader (the official way) from this vendor Rom. So if you plan to do so later, here you go with this first step.
gunmoule said:
No you wont loose your IMEI. Basically you are just flashing official MIUI Rom, your IMEI details are stored in another partition (non volatile) and FlashAll will not touch them.
You are safe to follow this guide, and by the way you would not be able to unlock the bootloader (the official way) from this vendor Rom. So if you plan to do so later, here you go with this first step.
Click to expand...
Click to collapse
thanks for ur info.
yeh, I tried to unlock it with official tool but kept failing.
I'll give that guide a show later when I'm home.
hopefully I don't brick my phone..lol
guide works great!
now i'm with global 7.3.7
is there a guide to flash TWRP with locked bootloader as well?
thanks!
pakudaboy said:
thanks for ur info.
yeh, I tried to unlock it with official tool but kept failing.
I'll give that guide a show later when I'm home.
hopefully I don't brick my phone..lol
Click to expand...
Click to collapse
Unlocking was successful only on dev rom in my case
pakudaboy said:
guide works great!
now i'm with global 7.3.7
is there a guide to flash TWRP with locked bootloader as well?
thanks!
Click to expand...
Click to collapse
Read up this thread: http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708 , this: http://en.miui.com/thread-240531-1-1.html and this: http://en.miui.com/thread-296053-1-1.html
Sent from my Redmi Note 3 using Tapatalk
s-u-f-f-e-r said:
Unlocking was successful only on dev rom in my case
Click to expand...
Click to collapse
ok
i'm flashing dev ROM now.
going to try if i can unlock BL.
so there no way to install TWRP without unlock BL first?
my situation is bit messed up, because I had Redmi Note 2 linke to same mobile number.
so when I tried to unlock it it keeps saying "Couldn't verify device, Current accoutn is different from the account info on the device" but i'm 100% sure i'm using same account tho.
s-u-f-f-e-r said:
Unlocking was successful only on dev rom in my case
Click to expand...
Click to collapse
unlocked fine with Dev ROM!
sweet
now time to find out how to flash TWRP!
Put the recovery image file in the folder from Unlocker.
Press Shift and Right click with the mouse on the empty space in the folder.
In the context menu choose Open Command Window Here
Put the phone in fastboot mode
Write in the terminal
fastboot flash recovery and write down the name of the image. For example:
fastboot flash recovery twrp.img
or
fastboot flash recovery recovery.img
Success.
s-u-f-f-e-r said:
Put the recovery image file in the folder from Unlocker.
Press Shift and Right click with the mouse on the empty space in the folder.
In the context menu choose Open Command Window Here
Put the phone in fastboot mode
Write in the terminal
fastboot flash recovery and write down the name of the image. For example:
fastboot flash recovery twrp.img
or
fastboot flash recovery recovery.img
Success.
Click to expand...
Click to collapse
done.
TWRP flashed, but somehow lost wifi function in Dev Rom
going to try flash Resurrection over see if that fix it.
seems everything's working now with RR rom!
thanks so much for everyone's help especially s-u-f-f-e-r!
Magisk has officially landed on the lovely Treble enabled Huawei devices! Props to Huawei reaching out and sent me a device for development
Instead of holding it off and wait till the next proper release, I decide to release it here so those willing to root their device can give it a try.
These Huawei Treble devices use an interesting setup: it no longer has a boot and recovery partition, but instead has a kernel partition, a ramdisk partition, and a recovery_ramdisk partition. Both boot and recovery share the same kernel, but with separate ramdisks on separate partitions. Since Magisk modifies the ramdisk in boot images, the patches will have to be applied to the ramdisk partition. This nature will very likely to also slightly change how custom recovery will be installed, my bet is similar to Pixel devices which ships with a full ramdisk image, and should be flashed to the recovery_ramdisk partition.
This build is only tested with Honor View 10, but it should work with Mate 10 and Mate 10 Pro in theory since these devices are very similar.
Enough of the rambling, let's get right into it!
Instructions
If your device have TWRP support, just directly flash it via TWRP. For devices without TWRP yet (currently all Huawei Treble devices), you can follow the instructions below:
Install latest Magisk Manager from the Official Thread
Go to Settings > Update Settings > Update Channel > Custom, and insert the following URL: https://goo.gl/jefZKH
Follow the instructions of "Install Via Magisk Manager" in the main thread, but instead of providing the boot image (which these devices do NOT have), provide the stock ramdisk.img.
If you are using EU View 10 with model BKL-L09, you can download the stock ramdisk.img I extracted from official OTAs in the attachments
If you have stock ramdisk images for other devices, please share them and I'll add them to the OP.
Make sure you are installing Magisk-v15.4(1541), which is only available through the custom channel you've set in step 2.
Pull the patched image with adb pull /sdcard/MagiskManager/patched_boot.img, and flash the patched ramdisk via fastboot:
fastboot flash ramdisk patched_boot.img
Reboot and you shall have a properly rooted device passing SafetyNet, start playing with some Magisk modules!
Donation
https://www.paypal.me/topjohnwu
topjohnwu said:
Magisk has officially landed on the lovely Treble enabled Huawei devices! Props to Huawei reaching out and sent me a device for development
Instead of holding it off and wait till the next proper release, I decide to release it here so those willing to root their device can give it a try.
These Huawei Treble devices use an interesting setup: it no longer has a boot and recovery partition, but instead has a kernel partition, a ramdisk partition, and a recovery_ramdisk partition. Both boot and recovery share the same kernel, but with separate ramdisks on separate partitions. Since Magisk modifies the ramdisk in boot images, the patches will have to be applied to the ramdisk partition. This nature will very likely to also slightly change how custom recovery will be installed, my bet is similar to Pixel devices which ships with a full ramdisk image, and should be flashed to the recovery_ramdisk partition.
This build is only tested with Honor View 10, but it should work with Mate 10 and Mate 10 Pro in theory since these devices are very similar.
Enough of the rambling, let's get right into it!
Instructions
If your device have TWRP support, just directly flash it via TWRP. For devices without TWRP yet (currently all Huawei Treble devices), you can follow the instructions below:
Install latest Magisk Manager from the Official Thread
Go to Settings > Update Settings > Update Channel > Custom, and insert the following URL: https://goo.gl/jefZKH
Follow the instructions of "Install Via Magisk Manager" in the main thread, but instead of providing the boot image (which these devices do NOT have), provide the stock ramdisk.img.
If you are using EU View 10 with model BKL-L09, you can download the stock ramdisk.img I extracted from official OTAs in the attachments
If you have stock ramdisk images for other devices, please share them and I'll add them to the OP.
Make sure you are installing Magisk-v15.4(1541), which is only available through the custom channel you've set in step 2.
Pull the patched image with adb pull /sdcard/MagiskManager/patched_boot.img, and flash the patched ramdisk via fastboot:
fastboot flash ramdisk patched_boot.img
Reboot and you shall have a properly rooted device passing SafetyNet, start playing with some Magisk modules!
Donation
https://www.paypal.me/topjohnwu
Click to expand...
Click to collapse
Finally!! [emoji16] was waiting for this.... Thank You.
Sent from my BKL-L09 using Tapatalk
Awesome mate. This also working with Huawei P10 plus running Treble V9. Thank you thank you :good:
Nice! Great job
We can do this follow instructions from completely stock bkl l09 C636? My 1st honor phone.. Not sure it have those locked boot loader like xiaomi or not..
Help..
Hey man, Thanks a lot.. It's really nice to have magisk for v10.. I am kind of a noob.. Can u provide step by step instructions and Patched Img for Indian version BKL-09..
Thanks
does this require an unlocked bootloader?
Root Final Stage issue!
I have done all the steps but on the last stage when I try to flash ramdisk it's giving me an error failed (remote: command not allowed) please help...thanks
Rj_Param said:
I have done all the steps but on the last stage when I try to flash ramdisk it's giving me an error failed (remote: command not allowed) please help...thanks
Click to expand...
Click to collapse
This could be due to locked bootloader...
bhargavpa said:
This could be due to locked bootloader...
Click to expand...
Click to collapse
Thanks... Let me try again after unlocking bootloader.
Sent from my BKL-L09 using Tapatalk
Wow, that's freaky fast man.. you are wonderful.
since we don't have official firmware released yet and out of concern I'm asking, is there any chance of bootloop or brick?
I understand it shouldn't be if we follow steps in OP, but sometimes people miss a step or do something else, so what's the worst can we expect?
Narasimha12 said:
Wow, that's freaky fast man.. you are wonderful.
since we don't have official firmware released yet and out of concern I'm asking, is there any chance of bootloop or brick?
I understand it shouldn't be if we follow steps in OP, but sometimes people miss a step or do something else, so what's the worst can we expect?
Click to expand...
Click to collapse
So long as you have a backup of your device's ramdisk image, you should be fine. The ramdisk for the Honor View 10 is attached to the OP.
Does the ramdisk.img work for indian variants?
shihabsoft said:
Does the ramdisk.img work for indian variants?
Click to expand...
Click to collapse
Yes it's working... Just finished installing magisk...so far everything is fine but somehow SafetyNet is not working.
Sent from my BKL-L09 using Tapatalk
Rj_Param said:
Yes it's working... Just finished installing magisk...so far everything is fine but somehow SafetyNet is not working.
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
so you unlocked bootloader right? and also any honor features broke??? like camera modes etc etc...and share bootloader unlock process too...
@topjohnwu
Its doesn't work with my twrp 3.2.1-0 for P10plus. A older twrp version works.
It's a twrp version thing or do I need to add something?
Rj_Param said:
Yes it's working... Just finished installing magisk...so far everything is fine but somehow SafetyNet is not working.
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
Thanks for letting me know. So what are those software changes happened right after bootloader unlocking?
To install Magisk and gain root in your honor view 10 you have to unlock your bootloader first.
##Please backup your data before proceeding with the process. You will loose all your data if you unlock the bootloader. ##
Please follow below steps to unlock bootloader
1) Create a Huawei ID on this page https://goo.gl/GkkdxE if you don’t have one already.
2) After creating a Huawei id, fill out the details.
3) You will need your phone’s IMEI number, to know that dial * # * # 1357946 # * # * on the dialer app. Fill the required fields and click the Submit button.
4) Save the unlock code you received.
5) Now connect your Honor View 10 to the PC with a USB cable.
6) In the ADB command window, type the following command to boot your Honor View 10 into fastboot mode.
adb reboot bootloader
7) To unlock the bootloader, type the following command and hit Enter. Replace key with the unlock key you’ve previously saved. For example, fastboot oem unlock 44801904392841
fastboot oem unlock [unlock key]
Sent from my BKL-L09 using Tapatalk
FWIW the Honor View 10's ramdisk works on the Huawei Mate 10 Pro. I would definitely not try that with any non-Kirin 970 device, though.
Rj_Param said:
To install Magisk and gain root in your honor view 10 you have to unlock your bootloader first.
##Please backup your data before proceeding with the process. You will loose all your data if you unlock the bootloader. ##
Please follow below steps to unlock bootloader
1) Create a Huawei ID on this page https://goo.gl/GkkdxE if you don’t have one already.
2) After creating a Huawei id, fill out the details.
3) You will need your phone’s IMEI number, to know that dial * # * # 1357946 # * # * on the dialer app. Fill the required fields and click the Submit button.
4) Save the unlock code you received.
5) Now connect your Honor View 10 to the PC with a USB cable.
6) In the ADB command window, type the following command to boot your Honor View 10 into fastboot mode.
adb reboot bootloader
7) To unlock the bootloader, type the following command and hit Enter. Replace key with the unlock key you’ve previously saved. For example, fastboot oem unlock 44801904392841
fastboot oem unlock [unlock key]
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
I know the procedure, but once you unlock the bootloader does any security features get disabled? And does it just wipe /data or including the internal storage?
View attachment 5472077
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
*/Your warranty is now void.
We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or recoverys, kernels.
You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers./*
Click to expand...
Click to collapse
FLASHING GUIDE
you must need to unlock your bootloader
Click to expand...
Click to collapse
1. adb reboot bootloader
3. fastboot flash boot twrpname.img
4. fastboot reboot recovery
note! will ask a password to decrypt or to see internal storage just put the password (optional if your device have a password or pattern,pin)
5. flash magisk-v23.0.zip (optional)
6. then reboot system. done!!
Click to expand...
Click to collapse
INFORMATION!
- device is shipped as android 11 , and device don't have recovery partition meaning its virtual A/B its use recovery as boot check here (for more info)
NOTE FOR FLASHING!!
- If you face wifi Problem use twrp_a or twrp_b .
- If you want to root your device flash magisk already included in *.zip (Don't use official one because you will face bootloop)
DOWNLOAD
download twrp_a
download twrp_b
MAGISK FOR ROOTING
credits: to topjohnwu
DOWNLOAD MAGISK
WHAT WORKING ?
- Decryption
- flashing payload.pin / recovery rom (note! if you want to flash rom or modify your device just back up your imei please)
- fastbootd
- etc.
- for the bug just tell me.
DEVICE TREE
DEVICE KERNEL SOURCE
CREDITS
- TEAM WIN FOR RECOVERY
- TESTER'S FROM INDONESIA
- TOPJOHNWU for magisk
- @osm0sis for the A/B installer script
BUILD BY:
t.me/myusernameiswhat @mastersenpai05)
link of b not working
Abdullah.Csit said:
link of b not working
Click to expand...
Click to collapse
Done sir
thanks!
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
symbuzzer said:
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
Click to expand...
Click to collapse
If you got unlocked bootloader device then you ready to go.
try "a" if you got wifi issues then use "b".
symbuzzer said:
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
Click to expand...
Click to collapse
You need tool to unlock your bootloader, you can use a mi unlock tool you need to wait 7days, or if you want to unlock that instantly you need other tool
TWRP will be updated after I successfully done my experiment
is just need flash a or b anyone is ok ? or need flash both ?
How to backup imei?
Is there any way to flash TWRP permanently?
"With the new TWRP 3.6.0, things will be a little different. After you temporarily boot the TWRP image using the ‘Fastboot boot’ command, you will be able to see a Flash Current TWRP in the Advanced section of custom recovery."
Is this working?
symbuzzer said:
How to backup imei?
Is there any way to flash TWRP permanently?
"With the new TWRP 3.6.0, things will be a little different. After you temporarily boot the TWRP image using the ‘Fastboot boot’ command, you will be able to see a Flash Current TWRP in the Advanced section of custom recovery."
Is this working?
Click to expand...
Click to collapse
Will not
why not?
Hi. Thanks for the development
I have a question. Assuming that I've flashed this twrp, how do I properly backup the entire phone, I mean which one will be selected in backup option . I want to flash some custom roms and restore the created backup if something goes wrong
09kkthxbb said:
Hi. Thanks for the development
I have a question. Assuming that I've flashed this twrp, how do I properly backup the entire phone, I mean which one will be selected in backup option . I want to flash some custom roms and restore the created backup if something goes wrong
Click to expand...
Click to collapse
NO advisable, Do not try this way!
I have a bad experience with this method, I have a Note 8 pro (Begonia), i did a rom backup with twrp, then flashed other custom roms, after few tested on various roms, i decided to get back to Miui rom, thinking of the easy way, I restored its Miui backup images via twrp, the phone bricked. In the end, I had to sent to xiaomi service center for repair.
I believe that was due to different version of Preloader of rom crashed with TWRP.
Of course, with some "MTK auth bypass softwares" available today, you may take the risk if you wish.
Could anyone provide here any already backup of Chopin stock recovery share it here, please?
Edit: Since there is no recovery partition, You had just re-flashing "boot.img" by twrp then you will restore stock recovery and that operation will also let you lose your root.
Is this compatible with x3 gt global 12.5.7 update?
koolkattt said:
Is this compatible with x3 gt global 12.5.7 update?
Click to expand...
Click to collapse
Hi man, we tried this as well.
We rollback to the old version for now just to have a working root access.
являетсяIs there any localized firmware on this device? will they?
koolkattt said:
Is this compatible with x3 gt global 12.5.7 update?
Click to expand...
Click to collapse
Sure, im runnign this version and works good with magisk
folken2003 said:
Sure, im runnign this version and works good with magisk
Click to expand...
Click to collapse
how to make work? I try many way also bootloop, can share step by step to success ? thanks
Hi everyone! Unfortunately I have had to revert back to the stock china rom my phone came with due to google cracking down on rooted/altered devices, and apps such as snapchat and google pay are essential for me. I was told if I locked my bootloader while on global firmware, it would brick, so here is a tutorial to revert your realme GT back to the stock china rom.
Make sure you have all software necessary - China Rollback file A24 and twrp 3.6.0 v2 from here (thanks to qiurigao), put those files in your sdk platform tools folder, and adb and fastboot drivers, sdk platform tools
Make sure USB debugging is enabled on your device.
1.boot to fastboot mode
adb reboot bootloader
Click to expand...
Click to collapse
1.boot to twrp
fastboot boot twrp-3.6.0-V2.img
Click to expand...
Click to collapse
Once you are in twrp, you can change language by tapping the setting icon in the corner, and then tapping the globe and english.
2. push ROM file to /data/ota.zip
adb push RMX2202_11_A.24_ROLLBACK_Android11.zip /data/ota.zip
Click to expand...
Click to collapse
3. TWRP install /data/ota.zip
adb shell "twrp install /data/ota.zip"
Click to expand...
Click to collapse
Don't worry about the red text.
4. Go stock Recovery Format data
adb reboot recovery
Click to expand...
Click to collapse
5. once in realme recovery, you can tap english, and proceed to wipe data.
6. set up phone and turn on developer options to check that usb debugging is still enabled.
7. Boot into fastboot mode
adb reboot bootloader
Click to expand...
Click to collapse
8. Lock the bootloader
fastboot flashing lock
Click to expand...
Click to collapse
select yes to locking and wiping data.
Now your phone is set back to stock firmware, with no modifications. Google Pay works again! (ofc you have to install the play store and everything but it works again ) There will be lots of updates since the rollback file is quite old.
I actually had a china version as well but after some manipulations I have successfully locked the bootloader on Indian/Russian firmware, and the Google Pay and services work perfect which is really good as the Google services were completely useless in china rom.
SampleMan said:
I actually had a china version as well but after some manipulations I have successfully locked the bootloader on Indian/Russian firmware, and the Google Pay and services work perfect which is really good as the Google services were completely useless in china rom.
Click to expand...
Click to collapse
Oh nice! Could you tell me about these 'manipulations' ? I don't think I'll do anything like that ever again but just for my curiosity
kjpern said:
Oh nice! Could you tell me about these 'manipulations' ? I don't think I'll do anything like that ever again but just for my curiosity
Click to expand...
Click to collapse
1. The phone must be with an unlocked bootloader without a lock code on the screen. (software version at this point was C15 EU)
2. First we put this file into internal memory, RMX2202_ROLLBACK_A14_IN.
3. We go into FastBoot, boot into TWRP with the command
fastboot boot twrp.img
IMPORTANT!!! Categorically do not flash TWRP with the FLASH command
This TWRP is wildly slow, the commands are late, I pressed wait 5-6 seconds.
4. Next, if in TWRP we see the file RMX2202_ROLLBACK_A14_IN, we flash it, be sure to check the box "Force install stock payload rom"
if the file is not visible in TWRP, then commands via ADB
We copy the firmware after renaming it to RMX2202_ROLLBACK.zip to the /data/ota.zip directory with the command:
adb push RMX2202_ROLLBACK.zip /data/ota.zip
Installing a previously copied file via TWRP:
adb shell "twrp install /data/ota.zip"
5. We reboot into the stock recovery manually, or with the command:
adb reboot recovery
and do Format Data (Congratulations to you India A14) you can enable, activate
6. Using OppoRealme-OFP-Flash_1.0-x64_Windows, flash 504040RMX2202export_11_A.16_2021101902310291 (The flasher is launched via the command line, there we select the region we want and then the first item under the number 0 so that it flashes clean)
(I flash for the first time with the label IN-India (When I flash on the IN region for the first time with a flasher, the body fell into FastBoot in the process and the command line was waiting and the process did not go, then I drove it into FastBoot with the three buttons and the process continued.), activated the body, and flashed it over the same version, but with the tag RU-Russia.I think you can immediately flash on RU, skipping the step with flashing to IN, but here it is already according to your desire, if you want exactly like me, then do this)
7. Downloaded and installed all OTA updates. (You can download OTA update c16 in zip and flash through three points, after enabling developer mode)
8. IMPORTANT!!! lock the bootloader after all the updates, the phone itself wiped again, it is normal.
This was taken from another forum and translated in Google translate but I think you'll understand what is going on.
Do you have a video showing the step by step for this procedure? I have a realme GT 5G that has a global ROM, I would like to use the Chinese Rom to be able to use NFC.
Luccas Oliveira said:
Do you have a video showing the step by step for this procedure? I have a realme GT 5G that has a global ROM, I would like to use the Chinese Rom to be able to use NFC.
Click to expand...
Click to collapse
Sorry, I'm afraid not. The steps listed are the same as the process to convert your phone to the global rom, it's just that you lock the bootloader at the end. So if you remember that, it's just that but locking the bootloader at the end.
kjpern said:
bought realme on ali, the seller sent it with this ROM in v3 realme ui version. The device already has the bootloader unlocked, following this process, do I have any risk? I see many reports here
Click to expand...
Click to collapse
Sorry man I'm not sure for international devices, but if you're certain that your realme was originally a chinese model, you can do this? I would ask some other threads as well
kjpern said:
Sorry man I'm not sure for international devices, but if you're certain that your realme was originally a chinese model, you can do this? I would ask some other threads as well
Click to expand...
Click to collapse
Non-international device, it is Chinese. in which a global rom was added by the aliexpress seller. I want to go back to the CN factory rom following your tutorial.
installing the rollback rom is simple? Can there be any problems during the installation?
Luccas Oliveira said:
Non-international device, it is Chinese. in which a global rom was added by the aliexpress seller. I want to go back to the CN factory rom following your tutorial.
installing the rollback rom is simple? Can there be any problems during the installation?
Click to expand...
Click to collapse
Yes you should be good to go. Hopefully you face no problems.
kjpern said:
Yes you should be good to go. Hopefully you face no problems.
Click to expand...
Click to collapse
Your tutorial works perfectly, thank you very much! this CN ROM does not work the 5G ? I don't see the option to change the network type. App notifications work correctly?
Luccas Oliveira said:
Your tutorial works perfectly, thank you very much! this CN ROM does not work the 5G ? I don't see the option to change the network type. App notifications work correctly?
Click to expand...
Click to collapse
Hi, for notifications I ended up having to check permissions for notifications on every app I installed, I'm not sure why but I had to do that
For 5G I had to wait like a week one time, it might be because you got your realme recently but just wait a bit and do a restart