Hi together,
I own a ZOPO speed 7 plus since last Year and with OS 5.01 everything works fine. After updating to Marshmallow, the Kompass is still not working. There was a "fix" from Zopo by "Karl" but this was just a setting back some Things to 5.o1, and the Kompass didnt work anyway. Zopo tells to the German Android-Hilfe Forum, that this issue was sent to Zopo Engeneers to fix that, and announces a further Update OTA. That was about three Month ago. Meanwhile ist the Fact, that everyone who updated from 5.01 to 6.01 has the same Mistake. Never heard from Zopo again.
Maybe, there is someone outside who has fixed this itself.
It would be fine, to hear about this fact.
Thanks for any Answer in Adwance.
Tinni16
Related
Since yesterday evening new update is available to the chinese 4G version 7D-503L
7D-503LV100R001C233B008
Based on the nomenclature (R001) this should be an update to Android 4.2!
Download was not yet successful.
Anyone else had more success?
mru55 said:
Since yesterday evening new update is available to the chinese 4G version 7D-503L
7D-501V100R001C233B008
Click to expand...
Click to collapse
7d-501 filename for 503 hardware ?
on this page
we have :
android 4.4 , B007 and B010 firmware
android 4.2 , B007 and B013 firmware
R001 of your filename let think's it's android 4.2 , but why B008 ? B013 is available .....
(and C233 is for china market with chenese apps )
ps : my phone ( 7d-503L in 7d-503LV100R002C233B010 android 4.4 EMUI 2.3 ) did not found new update
Ooops. Darn auto correction.
Of course this would not show up as an update on devices already on 4.4
mru55 said:
Since yesterday evening new update is available to the chinese 4G version 7D-503L
7D-501V100R001C233B008
Based on the nomenclature (R001) this should be an update to Android 4.2!
Download was not yet successful.
Anyone else had more success?
Click to expand...
Click to collapse
I have a 7D-503L. Currently installing 15 Aug KK update B10.
Is it 503L or 501?
impossible to install
I went from boo2 to boo7 same Chinese version, the site instructs to use Sim for upgrade but links for software won't work . page needs translation and is almost impossible to upgrade thru site ,very dissatisfied with site,soon as I can find recovery software am going to version bo10, no way to go from boo7 to boo8
if the system was Rooted, the download fails.
Must reset the system then the download works.
For information there is a slight update with no visible change. The system retains the previous settings.
Thanks for the tip.
Reset how? Just stop super su and reboot?
Or actually factory reset? (that would be too much effort...)
mru55 said:
Thanks for the tip.
Reset how?
Click to expand...
Click to collapse
I have a French phone and that appears like this:
"Paramètres / Sauvegarder et réinitialiser / Restaurer les valeurs d'usine."
I suppose :
Settings / Save and Reset / Reset to factory defaults.
Was afraid of that.
I will wait to hear from more feedback from users. As is, I will probably revert back to B006. Wifi 5GHz did not work but GSM connectivity was outstanding. Or as you would say fantastique!
B008 works great! Yes its a step backwards from 4.4 to 4.2, but the lag with the B007 is much less now, it feels pretty snappy, as good as the B010 (4.4)
However wifi and 3g seem to be much improved! Especially for me in the USA. Yes! this is a huge thing for me!
320DPI is awesome again and I can install all those apps that weren't compatible before with the 400DPI 4.4 roms.
This is the best version for the 503L. forget B010...
omniphil said:
However wifi and 3g seem to be much improved!
Click to expand...
Click to collapse
I noticed that too but to me that's pretty much it.
no other notable changes from the B007.
Obviously, it is still better than the b010 :good:
So, I've installed the full ROM from the EMUI site.
All data including root survived!!
I haven't had any Wi-Fi issues. Can confirm that 5GHz is still there. GSM will be checked during the week.
One thing I have noticed: GPS which was always good, definitely got better. More than a meter from the window, where I previously could not get a fix, I get a very goog one within seconds.
Added:
Seems like brightness adjustment has been tweaked towards the lower setting (=brighter).
omniphil said:
B008 works great! Yes its a step backwards from 4.4 to 4.2, but the lag with the B007 is much less now, it feels pretty snappy, as good as the B010 (4.4)
However wifi and 3g seem to be much improved! Especially for me in the USA. Yes! this is a huge thing for me!
320DPI is awesome again and I can install all those apps that weren't compatible before with the 400DPI 4.4 roms.
This is the best version for the 503L. forget B010...
Click to expand...
Click to collapse
Still sitting on R002,B010 and dealing with the 400dpi.
Just wondering if you still feel B008 is better than KitKat B010?
Sent from my X1 7.0 using Tapatalk
realeze said:
Still sitting on R002,B010 and dealing with the 400dpi.
Just wondering if you still feel B008 is better than KitKat B010?
Sent from my X1 7.0 using Tapatalk
Click to expand...
Click to collapse
For me B008 was a huge improvement over B010.
B010 has a really snappy feel to it, performs good and eliminates the lag after opening the lock screen.
That's it however...
B010 has issues with...
Wifi and 3G signal cutting out frequently
400DPI (Makes a bunch of app incompatible)
Apps shutting down in the background after a while (You wont get messages from people on data services like, Whatsapp, Line, etc...)
My biggest issues was the signal drops, those are far less frequent on B008, Yeah there is more lag and performance issues, but it is a much more functional rom and is probably why its the newest rom they have put out...
Thanks! I just downgraded to B008 and so far it is a huge improvement over B007. Much smoother and the DPI issue makes it a fair tradeoff for KitKat.
Sent from my MediaPad X1 7.0 using Tapatalk
Stock recovery and CWM recovery 7D-503L 4.2.2
Hello good. I have the 7D-503L MediaPad X1 android version 4.2.2 (B008). The strange thing is that I get the "build.prop" file that is in the system folder as (ro.build.product = hw 7D-501L). All updates are for 7D-503L. Anyway, I lost the stock recovery with which I can not install the custom recovery.
As much as I have researched I can not get a picture of the stock recovey nor custom CWM recovery for this verision and I need to update, backup, etc.
Does anyone have them? It could flash recovery? .If So could pass me.
Thanks and greetings to all
Hmm just realized I never reported back on GSM phone performance of B008: not as good as B006 was, but MUCH better than B007.
@menradio
idem for me, I have the same reference. Yet, it is, indeed, a 503L.
you can check here, this is the latest firmware, on asus global server
from 15th december 2015.
you can install with new install with twrp or other...
I haven't updated that yet, but according from their own forums it is still 5.0.
It has better memory management ( I believe they updated the memory management tool from boost master to house keeper)
--- that used to be from the zenfone 2 series but now its on the padfone now. (Looks like a step closer to MM)
Gps is able to lock even quicker than before.
Sound quality is also better.
I will update it pretty soon, want to see some problems that arise from this update.
Can't wait for M on this device, but hopefully asus could continue support for this device for the next version of android as Im hoping to have vulcan support on this baby. (Its either that or Cm 14 when it comes out)
Edit:
Just updated this device, supersu was lost but reflashed supersu and works fine.
Performance seems pretty great (not noticing a difference), and memory management is just a bit better.
Justatechie said:
I haven't updated that yet, but according from their own forums it is still 5.0.
It has better memory management ( I believe they updated the memory management tool from boost master to house keeper)
--- that used to be from the zenfone 2 series but now its on the padfone now. (Looks like a step closer to MM)
Gps is able to lock even quicker than before.
Sound quality is also better.
I will update it pretty soon, want to see some problems that arise from this update.
Can't wait for M on this device, but hopefully asus could continue support for this device for the next version of android as Im hoping to have vulcan support on this baby. (Its either that or Cm 14 when it comes out)
Click to expand...
Click to collapse
Doubt it'll be updated past MM. ASUS already mentioned that a Padfone S2 will be coming out sometime in 2016.
xtermmin said:
Doubt it'll be updated past MM. ASUS already mentioned that a Padfone S2 will be coming out sometime in 2016.
Click to expand...
Click to collapse
Agreed, I think the only reason we are seeing an update this late its product cycle is because they haven't released this new one yet.
Does this version allow Android Pay to be installed?
Linux4ever85 said:
Does this version allow Android Pay to be installed?
Click to expand...
Click to collapse
Unless more banks and agencies around the world chip in, Android Pay will probably not work.
Latest version ends in .43
And the latest version .43 works dirty flashed over .41, don't see anything new for us yet...
rschwarzwalder said:
And the latest version .43 works dirty flashed over .41, don't see anything new for us yet...
Click to expand...
Click to collapse
Stability update and I think the security patch has been updated to Jan 1 2016 I believe.
Yes.. And Bluetooth volume is louder
Justatechie said:
Stability update and I think the security patch has been updated to Jan 1 2016 I believe.
Click to expand...
Click to collapse
Huh, my security patch is still December 2015, hope I don't have to wipe and reflash...
I didn't update the yet because I hadn't had enough time to do so.
If it doesn't change I wouldn't worry, i could be wrong it was only just a guess
hello, my name's Andy.
I'm a fellow Asus padfone user. Recently I've post something in Q&A forum about storage issue.
If not too much trouble, could anyone please look at it. Thank you very much...
Hi,
It's 2nd quarter 2016, is somebody got Android M update? I think based on the people who use Padfone S/X they will get android M update on Q2 2016 around April-June. is anyone have updated information?
Howdy all!
What is the highest OS build rom that is availble for the Springboard/303? Is it as high as 4.4? Maybe even 5? I have looked but cant find a conclusive post on what is a good and stable build for this tablet. I am running 4.01 huewei image right now.
Thank you!
For the unbranded S7 it was 4.03.
I don't whether custom roms can be flashed, but these range up to 4.4 only. The late roms of Zyr3x, the last dev, who got banned on XDA for selling his roms, had severe issues, there wasn't anything useful since spring 2014. So check the old threads for hints and links, which still work.
Any suggestions for a 4.4 rom? I searched through the forums and didn't find any that seemed to apply.
Anything up to May 2014. I'm not sure, but didn't Kitkat start with 4.3.x? In May/June Zyr3x began releasing CM11s based on a new source, which would self-destruct after a couple of reboots. I never found any evidence that these roms were working longer than a couple of days for anyone,so it was not my fault, that this happened with any new version, and an early CM12 by the same dev. With CM11 even with the smallest possible GAPPS there was only 1 to 3 MB free mem on the tiny (350MB) system partition. This was probably the cause for instability.
But I'm not sure whether you could use any of these roms on the Springboard. The free S7 has no locked bootloader, probably you first have to unlock that on the Springboard. If possible.
I'm using the 4.4.4 released from zy3ex. Some time (not often) reboot and loses something in the data partition, usually some app config.
The bluetooth has problems.
Anyway I'm satisfied.
Hello! Last week I purchased a Z7 Max from Efox. It came with stock Android 6 and worked very good out of the box. But I had to realize, that the battery seems to be VERY poor. Even after a few cycles of loading... What means very poor?: for testing I stopped every app, service, wifi, mobile, gps - all. After 8 hours without doing anything the battery was
35% !! WTF. Who needs a mobile like this.
I found a lot of threads which described the same behaviour after upgrading to Marshmellow with different devices (but found no one complaining the Z7 Max...).
Does anyone else have the same problems and hopefully has solved it?
Thank you in advance - Wolfgang
There is no stock Android 6.0 rom for the Z7 max as far as I am aware. What is the displayed version in the settings? Last official version is 3.86.
You should try to clear caches from recovery, or factory reset the device, then test it once more.
I have a z7 max which I haven't used for more than 8 months. I just started using it again since unofficial cm13 and Rr are out. The battery life is very poor, I can't remember how it was before but in my case my battery drops from 15% to 1%. When I connect a charger the phone states 5% right away.
I think in my case it's a bad battery but after reading this I'm considering installing latest stock rom for testing.
no Solution
Sorry for my late reply to your answers - I was on a trip for a week.
Well - with Android 6 , this was a misreading by me. Sorry. It had 5.1.1 with Software 3.9.6. Now I did a full wipe and "up"grade to 3.8.6. Sadly this had no battery-effect at all. The only progress was, that the bad behaviour at every reboot to update all apps (took about 5-10 Minutes!) is over.
I guess it's a hardware-defect and I will send it back to eFox. Very sad about this - I like this phone really.
Thanks for your replies (sorry for bad english...)
3.9.6 is probably the UI version (User Interface), of the last official firmware :
3.8.6 is indeed the last stock OTA (over the air) firmware update : it's a lollipop (5.1) android update.
So you probably reflashed the same android firmware on the device.
Hi everyone, about 2 years ago I bought a Realme 7 Pro and I always received the official OTAs ... while Android 11 was officially released I downloaded and installed this version from the Internet: RMX2170_11_A.41. Probably this caused some problems and from that moment I no longer receive OTAs ... there is a way to downgrade and go back to the very first version in order to get back to normal and receive all the updates including android 11 and 12 ? Thanks a lot to anyone who will be able to help me because I don't know how to solve ...
P.S. i have already done a hard reset and a factory reset but nothing has changed
Thanks you for the collaboration