SuperSU v2.78 has been available for a few days now. Has anyone updated theirs till now. Is it working on honor 7?
V2.76 did not work with the stock kernel. is it the same with this version?
What about other kernels. If anyone have tried it, please let us all know.
Thanks
I have DigiGoon's kernel and SuperSU 2.78
Works totally fine so far
Sent from my Honor 7 using XDA Labs
lionboy33 said:
I have DigiGoon's kernel and SuperSU 2.78
Works totally fine so far
Click to expand...
Click to collapse
I am also using boot.img from his kernel but was afraid of giving it a try. Am not near a PC and would not have been able to do anything if it bricked.
Thanks for the reply. Will give it a try now.
Alright, good luck
Sent from my Honor 7 using XDA Labs
I flashed it directly in a stock ROM without any issues.
zinko_pt said:
I flashed it directly in a stock ROM without any issues.
Click to expand...
Click to collapse
Awesome. Thanks for the info.
muradulislam said:
Awesome. Thanks for the info.
Click to expand...
Click to collapse
If you find any bootloop, try previous SuperSU versions. Probably 2.62 is the safest one.
zinko_pt said:
I flashed it directly in a stock ROM without any issues.
Click to expand...
Click to collapse
What ROM were you on?
ocali94 said:
What ROM were you on?
Click to expand...
Click to collapse
I installed the B380 stock,rooted (TWRP 3.0.2.0) with supersu 2.71, goople play propose me an update to supersu of 2.78... works very well !
Franckydiam said:
I installed the B380 stock,rooted (TWRP 3.0.2.0) with supersu 2.71, goople play propose me an update to supersu of 2.78... works very well !
Click to expand...
Click to collapse
Stock kernel as well?
ocali94 said:
Stock kernel as well?
Click to expand...
Click to collapse
yes
ocali94 said:
What ROM were you on?
Click to expand...
Click to collapse
B190 and B380 stock ROMs either with 2.71 or 2.78 Supersu.
Related
Just got new update four chrome youtube videos issue .its a small update but imp 1!
Here it is
trendchanger said:
Here it is
Click to expand...
Click to collapse
Already running since yesterday
Sent from my ONE E1003 using Tapatalk
v4a
Have any of you managed to get viper4android running after this hotfix patch? It ran beautifully up to 2.1.2 but the 2.1.3 (005) update broke it for me so I reverted. Rooted with TWRP and SU, PlayerPro and Spotify.
frmad said:
Have any of you managed to get viper4android running after this hotfix patch? It ran beautifully up to 2.1.2 but the 2.1.3 (005) update broke it for me so I reverted. Rooted with TWRP and SU, PlayerPro and Spotify.
Click to expand...
Click to collapse
I did not know that v4a was even working with 2.1.2 haha. Thank you for that. If you ever get it to work or have any updates on v4a pls do let us know
Savya said:
I did not know that v4a was even working with 2.1.2 haha. Thank you for that. If you ever get it to work or have any updates on v4a pls do let us know
Click to expand...
Click to collapse
I managed to get it working by flashing Lolliviper from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
At the end of the OP there's a link to LolliviperROUND which uses the external speaker for stereo audio however I haven't tried that out yet. For the standard V4A, just flash Lolliviper.zip from recovery or through Flashify and reboot. The V4A app will be in the app drawer and you just proceed as usual
Hit the thanks button if I helped! :fingers-crossed:
bijgu said:
I managed to get it working by flashing Lolliviper from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
At the end of the OP there's a link to LolliviperROUND which uses the external speaker for stereo audio however I haven't tried that out yet. For the standard V4A, just flash Lolliviper.zip from recovery or through Flashify and reboot. The V4A app will be in the app drawer and you just proceed as usual
Hit the thanks button if I helped! :fingers-crossed:
Click to expand...
Click to collapse
Are you sure this works on the 2.1.3 Ota?
Is there any "out of the box" way to downgrade it to 2.1.2? swiftkey keyboard seems laggy/sluttery in some way for me with the latest version 2.1.3. Have any of you noticed the same?
qcn85 said:
Is there any "out of the box" way to downgrade it to 2.1.2? swiftkey keyboard seems laggy/sluttery in some way for me with the latest version 2.1.3. Have any of you noticed the same?
Click to expand...
Click to collapse
Install the 2.1.3-X
Savya said:
Are you sure this works on the 2.1.3 Ota?
Click to expand...
Click to collapse
I've had it running since 2.1.2 and i'm on 2.1.3-X right now, no problems at all
Kéno40 said:
Install the 2.1.3-X
Click to expand...
Click to collapse
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Funk Wizard said:
Already running since yesterday
View attachment 3564556
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
wch os u r using
n how did u changed the font
qcn85 said:
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Click to expand...
Click to collapse
No its a system update check your cell for system update
qcn85 said:
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Click to expand...
Click to collapse
Yes, you need to be rooted to flash v4a I suggest the kingroot then replace with supersu method.. barely took 5 minutes
Honestly speaking.. do not see a difference.. :v
Would love cyanogen for this one.. also will it give a feature to disable the quick settings?
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
rokilmr said:
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
Click to expand...
Click to collapse
The same was happening with me. I installed blueaparks twrp and it worked like charm. Install that twrp. Install 2.1.3 full rom. Then flash 2.1.3-x on it. Should work.
Sent from my ONE E1003 using Tapatalk
vinay7 said:
wch os u r using
n how did u changed the font
Click to expand...
Click to collapse
Running O2OS 2.1.3-X
Once rooted you can change or customize almost anything on the device
---------- Post added at 04:02 AM ---------- Previous post was at 04:00 AM ----------
bijgu said:
Yes, you need to be rooted to flash v4a I suggest the kingroot then replace with supersu method.. barely took 5 minutes
Click to expand...
Click to collapse
First V4A not O2OS compatible, and Second KOR never recommended, moreover u need custom recovery for V4A Flash
The normal method would also take just 5 minutes once files are downloaded and drivers installed.
---------- Post added at 04:04 AM ---------- Previous post was at 04:02 AM ----------
khandelwalgaurav said:
Honestly speaking.. do not see a difference.. :v
Would love cyanogen for this one.. also will it give a feature to disable the quick settings?
Click to expand...
Click to collapse
No lags on 2.1.3-X and is the best update till now. There are modules for disabling quick settings if you are rooted
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
rokilmr said:
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
Click to expand...
Click to collapse
khandelwalgaurav said:
The same was happening with me. I installed blueaparks twrp and it worked like charm. Install that twrp. Install 2.1.3 full rom. Then flash 2.1.3-x on it. Should work.
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Answered here
http://forum.xda-developers.com/devdb/project/dl/?id=15482&task=get
GUYS i have noticed BATTERY DRAIN AFTER 2.1.3.X UPDATE .....BATTERY DRAIN IS VERY MUCH NOTICEABLE!!!
trendchanger said:
GUYS i have noticed BATTERY DRAIN AFTER 2.1.3.X UPDATE .....BATTERY DRAIN IS VERY MUCH NOTICEABLE!!!
Click to expand...
Click to collapse
Let the ota settle down for a couple of battery cycles
Sent from my ONE E1003 using Tapatalk
I 've honor 5x indian version L22 variant. I have rooted it and have twrp super su and busy box already installed on phone
I need xposed for my phone but can't find anything yet
Can anyone look into that. Thank you on advance......I'm really looking for someone's help with the same.
prateek57 said:
I 've honor 5x indian version L22 variant. I have rooted it and have twrp super su and busy box already installed on phone
I need xposed for my phone but can't find anything yet
Can anyone look into that. Thank you on advance......I'm really looking for someone's help with the same.
Click to expand...
Click to collapse
You can't flash Xposed in EMUI. Well there is a modified stock ROM for our phone that you can flash Xposed with, I recommend that you flash a custom ROM first. Go try CM first for size.
Sent from my honor 5X using XDA Labs
I've installed Xposed on my L22 B360, there seems to be no problem. Go here and download xposed zip file for sdk23/arm64 version and flash it in TWRP. Then install the xposed installer apk to activate the modules. The first boot may take some time.
xskull03 said:
I've installed Xposed on my L22 B360, there seems to be no problem. Go here and download xposed zip file for sdk23/arm64 version and flash it in TWRP. Then install the xposed installer apk to activate the modules. The first boot may take some time.
Click to expand...
Click to collapse
Whoa. Great. I previously said it won't work because the original TWRP developer for our phone said so.
Sent from my Galaxy Tab 3 using XDA Labs
xskull03 said:
I've installed Xposed on my L22 B360, there seems to be no problem. Go here and download xposed zip file for sdk23/arm64 version and flash it in TWRP. Then install the xposed installer apk to activate the modules. The first boot may take some time.
Click to expand...
Click to collapse
which version have you installed on your phone? i tried installing xposed-v86-sdk23-arm64.zip but phone stuck at boot logo.
adriansticoid said:
Whoa. Great. I previously said it won't work because the original TWRP developer for our phone said so.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
so your saying that its not possible or your supporting that now it can be done?
adriansticoid said:
You can't flash Xposed in EMUI. Well there is a modified stock ROM for our phone that you can flash Xposed with, I recommend that you flash a custom ROM first. Go try CM first for size.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
which one do you suggest. I prefer max ram and everything working. It reached to my ears that CM still is not fully supported, isn't it correct?
prateek57 said:
so your saying that its not possible or your supporting that now it can be done?
Click to expand...
Click to collapse
Since the other guy said that it is working, then yes it should work for you also.
prateek57 said:
which one do you suggest. I prefer max ram and everything working. It reached to my ears that CM still is not fully supported, isn't it correct?
Click to expand...
Click to collapse
Actually I'm using CM+Xposed now for over a year. Never had problems with it.
Sent from my honor 5X using XDA Labs
prateek57 said:
which version have you installed on your phone? i tried installing xposed-v86-sdk23-arm64.zip but phone stuck at boot logo.
Click to expand...
Click to collapse
Same version. First boot will take some time. (Around 6 mins for me)
xskull03 said:
Same version. First boot will take some time. (Around 6 mins for me)
Click to expand...
Click to collapse
It will depend on the number of apps installed.
Sent from my Galaxy Tab 3 using XDA Labs
xskull03 said:
Same version. First boot will take some time. (Around 6 mins for me)
Click to expand...
Click to collapse
adriansticoid said:
It will depend on the number of apps installed.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
that you both of you for your prompt reply. i tried xposed-v86-sdk23-arm64 but it still stuck at boot logo while xposed-v85-sdk23-arm64 finally worked like a charm its may be because I'm at stock rom only.
also please enlighten me using about using CM a bit more. I'm pretty comfortable using custom roms but havn't tried CM yet. Which CM version should I try if this is my first hand on CM. Also would you please tell me about what benefits I can expect against my stock b360 ? and basically what are the pros and cons? . I'm sorry if its a very noob question.
prateek57 said:
that you both of you for your prompt reply. i tried xposed-v86-sdk23-arm64 but it still stuck at boot logo while xposed-v85-sdk23-arm64 finally worked like a charm its may be because I'm at stock rom only.
also please enlighten me using about using CM a bit more. I'm pretty comfortable using custom roms but havn't tried CM yet. Which CM version should I try if this is my first hand on CM. Also would you please tell me about what benefits I can expect against my stock b360 ? and basically what are the pros and cons? . I'm sorry if its a very noob question.
Click to expand...
Click to collapse
CM is closer to stock android than EMUI with little customizations, so if u want stock android experience go for it.
There are CM12.1 and 13 for us. CM13 is official with nightlies and it has Fingerprint support too. Go for it.
I would say that CM13 is much smoother than EMUI B360. While battery backup may vary, the trend I found was B130>CM13>B360. All 3 of them had xposed+amplify+greenify installed. B360 has VoLTE support, so if u are using Jio then u get True Voice calls(tho there's not much difference). IMO there is little reason to stay on B360 other than VoLTE.
prateek57 said:
that you both of you for your prompt reply. i tried xposed-v86-sdk23-arm64 but it still stuck at boot logo while xposed-v85-sdk23-arm64 finally worked like a charm its may be because I'm at stock rom only.
also please enlighten me using about using CM a bit more. I'm pretty comfortable using custom roms but havn't tried CM yet. Which CM version should I try if this is my first hand on CM. Also would you please tell me about what benefits I can expect against my stock b360 ? and basically what are the pros and cons? . I'm sorry if its a very noob question.
Click to expand...
Click to collapse
If you are in B360 right now, you can't flash custom ROMs. You need to downgrade to B350 or lower because it will bootloop.
You should try the latest nightly of CM.
The pros and cons will depend on your personal preferences.
CM is vanilla Android with some modifications for performance, while stock ROM is EMUI which has the looks of iOS.
Sent from my honor 5X using XDA Labs
xskull03 said:
CM is closer to stock android than EMUI with little customizations, so if u want stock android experience go for it.
There are CM12.1 and 13 for us. CM13 is official with nightlies and it has Fingerprint support too. Go for it.
I would say that CM13 is much smoother than EMUI B360. While battery backup may vary, the trend I found was B130>CM13>B360. All 3 of them had xposed+amplify+greenify installed. B360 has VoLTE support, so if u are using Jio then u get True Voice calls(tho there's not much difference). IMO there is little reason to stay on B360 other than VoLTE.
Click to expand...
Click to collapse
well I'm using jio as well as airtel 4g as jio 4g is not that a great experience except its free.
also are you trying to say that cm13 has better battery backup than b360? isn't b130 is for kiw-L21 or L24? how can I use that on my L22?
well what I basically need is smoothest experience without lags and everything working and that includes VoLTE and .
adriansticoid said:
If you are in B360 right now, you can't flash custom ROMs. You need to downgrade to B350 or lower because it will bootloop.
You should try the latest nightly of CM.
The pros and cons will depend on your personal preferences.
CM is vanilla Android with some modifications for performance, while stock ROM is EMUI which has the looks of iOS.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
Correct me if I'm wrong but if I downgrade to b350 i would loose VoLTE right? Well as said above I really like is smoothest experience without lags and everything working.
Also as you both suggested nightly CM13 that must worth a try. thank you for your valuable time and efforts for the prompt replies
prateek57 said:
Correct me if I'm wrong but if I downgrade to b350 i would loose VoLTE right? Well as said above I really like is smoothest experience without lags and everything working.
Also as you both suggested nightly CM13 that must worth a try. thank you for your valuable time and efforts for the prompt replies
Click to expand...
Click to collapse
All ROMs that we have are for all variants of this phone. Yes you'll lose VoLTE with B350 downgrade. Performance of custom ROMs vary from user to user because we have different app setup choices so it's important to try most of them. No problem buddy we are always here to help.
Sent from my honor 5X using XDA Labs
Xposed work on kiw-l22? Bcoz i have greenify purchased ver... want to apply to this device
Yup
seii3 said:
Xposed work on kiw-l22? Bcoz i have greenify purchased ver... want to apply to this device
Click to expand...
Click to collapse
Yes.....latest xposed version works like a charm
prateek57 said:
Yes.....latest xposed version works like a charm
Click to expand...
Click to collapse
Using this xposed version is it???
http://forum.xda-developers.com/showthread.php?t=3034811
Ya right
And install the framework from the app itself
Pre requisites
Rooted
Twrp installed
prateek57 said:
Ya right
And install the framework from the app itself
Pre requisites
Rooted
Twrp installed
Click to expand...
Click to collapse
using arm-64? i keep stuck at logo by flashing xposed-v86-sdk23-arm64.zip
Disclaimer: I'm not responsible for any device. Flash on your own risk! Warranty is void if flashed.
I wanted to make my own rom. It's based on stock last nougat frim for S6 920F i hope you like it
-Based on XXU5EQAC NOUGAT firmware with the FEBRUARY security patch.
-Debloated i remove a lot of apks form frim
-Odexed, Zipaligned, Busybox, Deknoxed and SQlite.
-Added Tweaks for battery , performance and it's very smooth
-Performance mod.
-S8 font for lock screen and weather.
Download here :
Mega link :https://mega.nz/#F!oZoS0BwZ!xPX2XaeQSbDvaFx0rowg4w
How to install:
1) Enter TWRP recovery.
2) Wipe Dalvik Cache, Cache and System.
3) Choose the rom zip
4) Flash Magisk that i put in the download folder you need to boot the rom and than download magisk manager form play store to have root
5) Reboot.
6) Wait 10 or 15 min for first boot.
Thanks to:
@AlexisXDA for helping me
@cloud596 thanks mate for your help
Screenshots:
Screen shots ?
the usb debug mode is work?
Chriss1983 said:
the usb debug mode is work?
Click to expand...
Click to collapse
Yes mate.
Bilal_687 said:
Screen shots ?
Click to expand...
Click to collapse
I will put now
How can I install your ROM on G920I? I really appreciate it
Excuse me for asking I'm still new here but What's different compared to stock ?
Base on stock nougat?
Awesome, my tutorial worked ahahaha, good luck with your works mate
Thank you for your effort I'm very interested in trying this one. Tell me one thing, coming from Marshmallow, do I need to flash Nougat bootloader and modem or is it OK just to follow the given procedure? Thanks!
Human_Fly said:
Thank you for your effort I'm very interested in trying this one. Tell me one thing, coming from Marshmallow, do I need to flash Nougat bootloader and modem or is it OK just to follow the given procedure? Thanks!
Click to expand...
Click to collapse
Just flash mate it will work
Sent from my SM-G920F using XDA-Developers Legacy app
tachiquan3 said:
Base on stock nougat?
Click to expand...
Click to collapse
Yes
Sent from my SM-G920F using XDA-Developers Legacy app
Bilal_687 said:
Excuse me for asking I'm still new here but What's different compared to stock ?
Click to expand...
Click to collapse
Debloated with nice tweaks
Sent from my SM-G920F using XDA-Developers Legacy app
Mercz23 said:
Just flash mate it will work
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thanks, cheers!
bielsimao said:
How can I install your ROM on G920I? I really appreciate it
Click to expand...
Click to collapse
You can flash it mate 920F and 920I are the same
Sent from my SM-G920F using XDA-Developers Legacy app
Can you add flotify sms?
nikkali25 said:
Can you add flotify sms?
Click to expand...
Click to collapse
Install it yourself.
LUUD18 said:
Install it yourself.
Click to expand...
Click to collapse
How?
sim tool missed
Mercz23 said:
Yes
Click to expand...
Click to collapse
Dual sim support? Coz i installed and didnt boot, stuck on recovery.
I'm running official RR 8.1 ROM with FK. Upon registration I get an error from Tez app (Custom Rom and root). I used magisk hide, tried clearing data, it's still the same. Any ideas? Magisk version is 16.0
THEALLSTAR said:
I'm running official RR 8.1 ROM with FK. Upon registration I get an error from Tez app (Custom Rom and root). I used magisk hide, tried clearing data, it's still the same. Any ideas? Magisk version is 16.0
Click to expand...
Click to collapse
What about before flashing FK
That's strange, magisk should have prevented that. It works for me
jawahar.T said:
What about before flashing FK
Click to expand...
Click to collapse
AFAIK, It worked on older version of FK.
Edit: No, it doesn't.
THEALLSTAR said:
AFAIK, It worked on older version of FK.
Click to expand...
Click to collapse
....
Thanks for the confirmation ...I was just going to Flash FK...
.....
What about CTS profile?? In magisk
jawahar.T said:
....
Thanks for the confirmation ...I was just going to Flash FK...
.....
What about CTS profile?? In magisk
Click to expand...
Click to collapse
I don't think there's any problem with FK. I flashed the older version of FK on which it worked. The problem is still there.
THEALLSTAR said:
I don't think there's any problem with FK. I flashed the older version of FK on which it worked. The problem is still there.
Click to expand...
Click to collapse
....
CTS profile??
jawahar.T said:
....
CTS profile??
Click to expand...
Click to collapse
True
THEALLSTAR said:
True
Click to expand...
Click to collapse
That's weird...try magisk hide to the tez app .....if tried reflash your ROM
jawahar.T said:
That's weird...try magisk hide to the tez app .....if tried reflash your ROM
Click to expand...
Click to collapse
Reflashing helped
THEALLSTAR said:
Reflashing helped
Click to expand...
Click to collapse
...
Way to go :good:
jawahar.T said:
...
Way to go :good:
Click to expand...
Click to collapse
For me still same....I changed from DOT to AEX....
vedhavyga said:
For me still same....I changed from DOT to AEX....
Click to expand...
Click to collapse
Did you clean flash the ROM??
jawahar.T said:
Did you clean flash the ROM??
Click to expand...
Click to collapse
Yes...but not wiped internal storage....will do it in next switch...
Try this version of Magisk: https://forum.xda-developers.com/showpost.php?p=76148659&postcount=3996
I'm tempted to try the regular custom Magisk 16.0 again, but I don't want to risk root detection again. 16.0 wasn't working for me when I tried it.
*Update to new TWRP build 3.2.3-1 or later!*H918 Oreo Stock rom.Stock Oreo zip with rootSteps:
Formate by going to advance wiping everything except SD card
Flash Rom
Flash Magisk
Boot
*20g Read before flashing 20g*
https://forum.xda-developers.com/v20/development/rom-h91820f-oreo-root-t3848854/post77987795
Downloads:
Android File Host
Mega
20g provided by @Phoenix591
Donate:Cash App
https://cash.me/$hmerz
PayPal
https://www.paypal.me/HassaanM
Was there some post about someone releasing updated TWRP that is Oreo compatible around 9/23?
@dudeawsome do we need to update our base to Oreo or can we stay on nougat and install your rom? Thanks for this.
BadToThePhone said:
@dudeawsome do we need to update our base to Oreo or can we stay on nougat and install your rom? Thanks for this.
Click to expand...
Click to collapse
It will do everything for you just follow the instructions
dudeawsome said:
*Will need an updated TWRP will update links once I get confirmation on the TWRP release*
H918 Oreo Stock rom.
Stock Oreo zip with root
Steps:
Formate by going to advance wiping everything except SD card
Flash Rom
Flash Magisk
Boot
Downloads:
Android File Host
Click to expand...
Click to collapse
So to be clear, I have to wipe system, data ect? I can't install over 7.0?
Sent from my LG-H918 using XDA Labs
Edit
Reading over and over what you put, the answer is clear.
My post is more like a WTF!!! This sucks lol
BROKEN1981 said:
So to be clear, I have to wipe system, data ect? I can't install over 7.0?
Sent from my LG-H918 using XDA Labs
Edit
Reading over and over what you put, the answer is clear.
My post is more like a WTF!!! This sucks lol
Click to expand...
Click to collapse
Lol you could try but I would recommend clean flash
dudeawsome said:
Lol you could try but I would recommend clean flash
Click to expand...
Click to collapse
Ahhh ok I see.
Sent from my LG-H918 using XDA Labs
Links are up! update TWRP first!
dudeawsome said:
Links are up! update TWRP first!
Click to expand...
Click to collapse
Thank you for your work on this! Anything removed from this ROM (i.e. RCTD, Triton, CCMD) or is it completely stock?
dleclair said:
Thank you for your work on this! Anything removed from this ROM (i.e. RCTD, Triton, CCMD) or is it completely stock?
Click to expand...
Click to collapse
Bone stock. Flash MK Oreo to remove the reset I want to work on Super Oreo builds to edit it more.
dudeawsome said:
*
Stock Oreo zip with root
Click to expand...
Click to collapse
Thanks a lot for putting together the zip. Can't wait to flash it (but need to backup stuffs first)!
dudeawsome said:
Bone stock. Flash MK Oreo to remove the reset I want to work on Super Oreo builds to edit it more.
Click to expand...
Click to collapse
what's removing the reset?
eigen said:
what's removing the reset?
Click to expand...
Click to collapse
Like rctd and stuff
so, is it just me or is it encrypting the data partition, cause im pretty sure it is...
Here is my steps on how I installed
Updated to the new twrp
Advance wipe data.system cache( I didn't format)
Flash Rom
Flash kernel
Flash magisk
Reboot took like 3mins
Restored my apps via TB
Everything is working good..
ki11aprime said:
Here is my steps on how I installed
Updated to the new twrp
Advance wipe data.system cache( I didn't format)
Flash Rom
Flash kernel
Flash magisk
Reboot took like 3mins
Restored my apps via TB
Everything is work good..
Click to expand...
Click to collapse
coming from stock rom or RR, LOS?
sinkoo1979 said:
coming from stock rom or RR, LOS?
Click to expand...
Click to collapse
RR
ki11aprime said:
RR
Click to expand...
Click to collapse
Stuck on LG logo for like 5 minutes.
sinkoo1979 said:
Stuck on LG logo for like 5 minutes.
Click to expand...
Click to collapse
Formate data in twrp and type yes
sinkoo1979 said:
Stuck on LG logo for like 5 minutes.
Click to expand...
Click to collapse
Strange mines booted under 5mins by following the steps I listed..