I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Files, fastboot and recoveries and bootloader unlock and super su for rooting
asus_t00n_twrp_2_7_1_1.rar https://mega.nz/#!355UmTCb!0Jn-0wlbGHG7lir8u9vq1l8BrR3dsepDdigqfJ9wRPk
twrp_2.8.7.0.rar https://mega.nz/#!GwRRBBjT!8ms39GK62XHairHOrxlmNJCwA-bDeaKA816Cg4lsQr0
Will this work for S Plus model?
It wont, using files from this thread might brick the device.
Sent from my SM-N910C using XDA Free mobile app
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
ChevanLemon said:
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
Click to expand...
Click to collapse
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is asus_t00n_twrp_2_7_1_1.img
If you are bricked, but you can still access fastboot mode, then you can unbrick and reflash stock firmware to your phone
First of all, Thank you so much for this GUIDE
Here are my doubts, and hoping for confirmation from you. My Padfone S is running well on latest kitkat firmware, rooted with SuperSu and TWRP 2.7.1.1 installed. Now, I wished to upgrade to Lollipop firmware.
Can I use the TWRP 2.7.1.1 to clean install the lollipop firmware instead of the stock recovery because I wished to wipe date, cache as well as SYSTEM before flashing?
My concern is I afraid if wipe the SYSTEM then the TWRP 2.7.1.1 would not be able to flash the Lollipop firmware successfully. Do I need to unlock bootloader in my case?
If I can do so, then can I still use the Flashify to flash TWRP 2.7.1.1 on the lollipop firmware, or I must use "fastboot flash recovery TWRP_2.8.7.0.img" method.
Thanks in advance for your kindly reply.:laugh:
Bootlooped
When I am upgrading my SuperSU and it requires a reboot,it automatically boot looped itself.
What should I do?
Linux4ever85 said:
Will this work for S Plus model?
Click to expand...
Click to collapse
Yes it work. Mine is Asus Padfone S Plus. Got bootloop problem. I have followed ninekaw guide. Thanks Ninekaw. U have save my precious padfone s plus
ninekaw9 said:
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Click to expand...
Click to collapse
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP --> link dead
Hi thank for your guidance on how restoring stock rom . Im having trouble detecting my phone when in fastboot mode, as you said to boot up into fastboot hold vol up and power and we will stuck at asus logo , but after i connect my pc and using adb cmd fastboot devices it didnt detect any devices and cant proceed to next step when i need to fastboot boot twrp 2.7.1.1
Currently im using twrp 2.8.7.0 , i want to use stockcrom because i need to use my padfone station (since any custom rom is not compatible with padfone station), any suggestions for this problem ? Thanks in advabce
Hi. I have had the OnePlus X for a very long time, and I have recently bricked .
Ok, here it goes :fingers-crossed:. I had a OnePlus X running CM13 with TWRP but a locked bootloader. I decided to try cyanogenmod recovery but soon realized it was terrible.
I was unable to flash img. files and the UI was unappealing to me. However at that point I was able to reboot into my ROM (CM13) with no issues. Knowing this, I thought that the only way I could get TWRP back was through a fastboot command (fastboot flash recovery recovery.img).
For me to execute that command, I needed to unlock my bootloader first, so I took all the necessary steps in the developer options settings menu. I then booted into fastboot mode and executed this command: fastboot oem unlock. This was my big mistake, as I read up after that you should not unlock bootloader on a custom recovery.
After executing this command, it booted me into recovery. I tried many times without success to wipe data and flash a rom zip via external sd card but they never worked. To make things worse, I was unable to boot up the device. Whenever I tried to power on the device, it booted straight into recovery. I am able to boot into fasboot and recovery, but that is pretty much it. Can someone please help me? I am willing to donate.
If you were able to flash the Cyanogen recovery with a locked bootloader you should be able to flash the official OPX recovery as well. You can download that from this link: https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
Then you should be able to unlock the bootloader!
Or if @Tanner1294's doesn't help, flashing stock rom via fastboot will surely help..
PS: Don't ever flash anything on a locked bootloader.
Hi,
I have unlocked my bootloader officially through the unlock tool and wanted to flash a custom recovery and also root my device (Redmi Note 3 - Snapdragon).
I was on Global Dev (6.5.19) before I even started to unlock my bootloader.
After unlock, I was succesffuly able to flash Cofface TWRP recovery through fastboot (well the command prompt didn't throw up any errors and had a success message).
However, when i reboot into recovery (either through button combination or "adb reboot recovery", I just get a screen that shows an image of a phone and USB cable" (similar to the image on the official bootloader unlock tool.
I checked whether the bootloader was unlocked (fastboot oem device-info) and it was indeed unlocked.
I have factory reset and reflashed 6.5.19 (Global dev rom) with MiFlash and this hasn't made any difference.
I also relocked the bootloader with MiFlash Beta and then unlocked successfully with the official unlock tool.
All of these steps still haven't made a difference.
Can someone please advise on the next step to do (as unlocked bootloader is pretty useless if I can't install a custom recovery).
P.S. I also get the same phone and usb cable image when booting into stock recovery
find it weird problem
if you dont,then first just boot the recovery
code:- fastboot boot xxxrecovery.img where xxxrecovery replace your own recovery img name in fastboot folder.
you must success and see twrp recovery
then again transfer img to sdcard and to flash from recovery.
then flash it from recovery and when you reboot ,just swipe to diseable rom to replace it with stock one.
find it really weird ,i did it hundredths of time in my offi unlocked and every time goes fine flashing recovery from fastboot
Hit thanks if i helped
please follow this... it does help for me.
http://forum.xda-developers.com/showpost.php?p=67636917&postcount=32
Thanks very much! These instructions solved my issue
mra1n1 said:
Thanks very much! These instructions solved my issue
Click to expand...
Click to collapse
I have the same problem .How u solved your problem?
You can easily flash this one ZCX Twrp. Is the best i didn`t encountered any issue until now. I`ve flashed custom roms and miui roms as well.. The install process is very simple, follow this one https://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Hello, I need help with my OPX.
I cannot enter Android or recovery, only Fastboot. Also, Fastboot on my PC can detect my device, but ADB cannot.
I had CM 13 and TWRP 3.0.2.0 installed on it, and now I was going to install LineageOS 14.1. I was first going to update TWRP to 3.0.3.0 because I thougt why not. I installed the new version with TWRPs image flashing and then it rebooted itself to Android. Then I was going to enter recovery again to install Lineage, the problem was that I couldn't even start the recovery. So now I tried to install TWRP with Fastboot, but it told me that the bootloader was locked which I thought was strange since I had unlocked it before.
So I tried to unlock the bootloader with Fastboot using "fastboot oem unlock" which it reported that it did and now I couldn't even enter Android.
But when I use "fastboot oem device-info", it says false to both unlocked and tampered and I still couldn't flash or boot into a recovery with Fastboot.
So now I can only boot into Fastboot Mode.
EDIT 2: Never mind, I fixed it with https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Can I remove this thread somehow?
You needed to flash OOS3 ROM or system partion before flashing 3.0.3 and Lineage
Yepp, I noticed. Found out later that it was because of the older bootloader. I had no idea about that before.
I fixed a prior problem with my Xiaomi Redmi Note 3 Pro where there was no recovery and only went to fastboot, Went to into EDL mode and fixed the problem...
I tried to flash TWRP custom on my phone. I had USB debugging on and OEM unlocked. i tried to go around having the bootloader locked and flashed a file specific for going around Xiaomi bootloader locks and having TWRP as the recovery. So i went into EDL again trying to flash TWRP and ended up having EDL on my phone "permanently". I cannot afford a new phone. I REALLY NEED HELP recovering my phone while also having TWRP as the new recovery... :crying:
Developer475 said:
I fixed a prior problem with my Xiaomi Redmi Note 3 Pro where there was no recovery and only went to fastboot, Went to into EDL mode and fixed the problem...
I tried to flash TWRP custom on my phone. I had USB debugging on and OEM unlocked. i tried to go around having the bootloader locked and flashed a file specific for going around Xiaomi bootloader locks and having TWRP as the recovery. So i went into EDL again trying to flash TWRP and ended up having EDL on my phone "permanently". I cannot afford a new phone. I REALLY NEED HELP recovering my phone while also having TWRP as the new recovery... :crying:
Click to expand...
Click to collapse
Can you reboot back into recovery?
Why would you have the bootloader locked? You should unlock the bootloader.
isgakbrfc said:
Can you reboot back into recovery?
Why would you have the bootloader locked? You should unlock the bootloader.
Click to expand...
Click to collapse
No I can't go into recovery or fastboot. It's stuck in EDL mode...
The bootloader used to be unlocked but it somehow got locked while flashing the stock rom because i was recovering my device from a past brick.
Officially unlocking the bootloader takes too long and is too hard...
is anyone going to help me?
is anybody going to help me? I'll answer any question just please help me:crying: